Commit graph

362 commits

Author SHA1 Message Date
Gabor Juhos
cafe08a1b2 ar71xx: remove stray semicolons
SVN-Revision: 24651
2010-12-17 17:57:20 +00:00
Gabor Juhos
01c76bf128 ar71xx: fix WLAN LEDs on the DIR-825 board
SVN-Revision: 24650
2010-12-17 17:10:21 +00:00
Gabor Juhos
c1d3a23d19 ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards
SVN-Revision: 24649
2010-12-17 17:10:19 +00:00
Gabor Juhos
8390b7dc9b ar71xx: UBNT Secondary MAC address duplicate fix
There is Secondary MAC address duplicate problem with some UBNT
RouterStation and RouterStation Pro HW batches as Primary MAC addresses
are not increased by 2 per device in board data. Fix is to use 'Locally
Administrated bit' for Secondary MAC address instead of increasing
Primary MAC addresses by 1 which could overlap with other device
Primary MAC address.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

SVN-Revision: 24643
2010-12-17 17:10:01 +00:00
Gabor Juhos
a2a5598c00 ar71xx: add wlan led for the TL-WR941ND
SVN-Revision: 24612
2010-12-15 19:55:50 +00:00
Gabor Juhos
e421d2575f ar71xx: UBNT M-Series MAC address fix
UBNT M-Series devices have 2 MAC addresses in board data.
Fix is to use both entries from board data instead of one entry.

Signed-off-by: Kestutis Barkauskas<keba@devint.net>

SVN-Revision: 24611
2010-12-15 19:55:47 +00:00
Gabor Juhos
6c1ace2f28 ar71xx: init the LED pin for ath9k on the TL-MR3[24]20 boards
SVN-Revision: 24569
2010-12-14 18:01:04 +00:00
Gabor Juhos
a7750dae90 ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards
SVN-Revision: 24568
2010-12-14 18:01:00 +00:00
Gabor Juhos
9f38f9bf76 ar71xx: add missing files for the JA76PF board
SVN-Revision: 24444
2010-12-10 19:55:28 +00:00
Gabor Juhos
b680f088ba ar71xx: add support for the jjPlus JA79PF
Patch-by: Cezary Jackiewicz

SVN-Revision: 24440
2010-12-10 17:57:51 +00:00
Gabor Juhos
5b0c83edd9 ar71xx: add support for the TP-LINK TL-MR3220 v1 board
SVN-Revision: 24439
2010-12-10 17:57:48 +00:00
Felix Fietkau
8067f3f3cc ar71xx: work around a PCI controller bug which causes reads to the PCI_COMMAND register to return bogus values - properly fixes ath9k module reload issues
SVN-Revision: 24236
2010-12-04 01:32:15 +00:00
Gabor Juhos
9971dfe059 ar71xx: D-Link DIR-825 B1 eth1 MAC address is garbage
r22700 contained a copy-and-paste error that set eth0's MAC address
twice and never set eth1's.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 24036
2010-11-19 07:24:00 +00:00
Gabor Juhos
f4d5c885e4 ar71xx: return statements does not need parenthesis
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23979
2010-11-12 18:51:38 +00:00
Gabor Juhos
e244e1c7cd ar71xx: fix inline attribute location
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23978
2010-11-12 18:51:21 +00:00
Gabor Juhos
acd8ad4de5 ar71xx: wrap long lines
(build errors has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23977
2010-11-12 18:51:04 +00:00
Gabor Juhos
eef802855a ar71xx: fix trailing statements location
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23976
2010-11-12 18:50:47 +00:00
Gabor Juhos
500fac1735 ar71xx: fix whitespaces nits
(build error has been fixed - juhosg)

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

SVN-Revision: 23975
2010-11-12 18:50:29 +00:00
Claudio Mignanti
20b2a4417a Add support for Ubiquiti UniFi AP
SVN-Revision: 23904
2010-11-06 21:08:48 +00:00
Felix Fietkau
91b6c63adc ar71xx: Set eth1 MAC address from EEPROM for WNDR3700
The WNDR3700's art/caldata partition contains three MAC addresses at
offsets 0, 6, and 12, used for eth0/wlan0 (shared), eth1, and wlan1,
respectively. The existing code configures eth1's MAC address by adding
1 to eth0's instead of using the value stored in the EEPROM. This patch
causes the stored value to be used directly. (On my WNDR3700s, the three
stored addresses are all sequential anyway.)

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23876
2010-11-04 18:46:07 +00:00
Felix Fietkau
fc28e1cd7d ar71xx: fix the wndr3700 antenna group setting for the first wireless chip (thx, Mark Mentovai)
SVN-Revision: 23875
2010-11-04 18:39:49 +00:00
Felix Fietkau
b4e2c09b46 ar71xx: improve the wndr3700 quirks - move most of the code out of ath9k and instead allow the platform device to specify gpio overrides - fixes 5ghz signal strength issues
SVN-Revision: 23822
2010-11-03 14:55:53 +00:00
Felix Fietkau
9e2d1a194d ar71xx: use the new ar7240 switch driver for tl-wa901nd as well
SVN-Revision: 23576
2010-10-21 18:42:22 +00:00
Jo-Philipp Wich
a680385396 remove remaining references to dev-ap91-eth.h, patch by Stijn Tintel
SVN-Revision: 23451
2010-10-14 23:08:10 +00:00
Felix Fietkau
fc035b3cb6 ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver
SVN-Revision: 23439
2010-10-14 13:41:42 +00:00
Felix Fietkau
3941621dbc ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)
SVN-Revision: 23432
2010-10-14 00:14:59 +00:00
Gabor Juhos
697f5d0bdd ar71xx: initial support for jjPlus JWAP003
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)

SVN-Revision: 23165
2010-10-01 07:09:29 +00:00
Felix Fietkau
8511c6b16c AP96: Fix LAN/WAN setup
LAN (eth0) is behind a switch and the fixed speed/duplex was
supposed to be for it, not WAN (eth1).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

SVN-Revision: 23147
2010-09-28 22:55:14 +00:00
Gabor Juhos
32d12d5e5c ar71xx: add support for the TL-MR3420 v1 board
SVN-Revision: 23136
2010-09-27 14:53:59 +00:00
Gabor Juhos
b831ebdde9 ar71xx: AR724[12] requires different USB setup
SVN-Revision: 23135
2010-09-27 14:53:57 +00:00
Gabor Juhos
cda8655910 ar71xx: use the MDIO interface of the 2nd MAC on the ar7241
SVN-Revision: 23132
2010-09-27 14:53:49 +00:00
Gabor Juhos
b445943cdf ar71xx: move ath9k specific PCI fixup into a separate file
SVN-Revision: 23131
2010-09-27 14:53:46 +00:00
Gabor Juhos
4ae167959b ar71xx: use different address in ap91_pci_fixup for the AR724[012] SoCs
With this change ath9k can handle the wireless chip on the TL-WR841N v7
board which is based on the AR7241 SoC.

SVN-Revision: 23130
2010-09-27 14:53:43 +00:00
Felix Fietkau
a7bb7dd99e Add support for Atheros AP96 reference board
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.

mach-ap96.c is based on mach-wndr3700.c.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

SVN-Revision: 23125
2010-09-27 08:59:53 +00:00
Felix Fietkau
0c6653c6e2 ar71xx: select AR71XX_DEV_DSA when AR71XX_DEV_AP91_ETH is selected, do not select AR71XX_DEV_AP91_ETH for TL-WA901ND and TL-WR741ND
SVN-Revision: 22935
2010-09-05 16:17:06 +00:00
Gabor Juhos
b4336a8e2d ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards
SVN-Revision: 22882
2010-09-03 18:14:37 +00:00
Gabor Juhos
47f8fd1dde ar71xx: rewrite SPI drivers for the RB4xx boards
* add a new SPI controller driver
  * add SPI driver for the CPLD chip
  * convert the NAND driver
  * enable the mikroSD slot
  * enable more LEDs

SVN-Revision: 22863
2010-08-31 20:13:47 +00:00
Gabor Juhos
7bc5a672c1 ar71xx: change mac address initialization
SVN-Revision: 22700
2010-08-18 16:00:28 +00:00
Felix Fietkau
523fcf0497 ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563
SVN-Revision: 22675
2010-08-16 19:21:57 +00:00
Felix Fietkau
65899cfa49 ar71xx: remove the fifo cfg overrides for the ap91 ethernet code - these values have been wrong on every single device i've tested, falling back to the atheros values seems to be the right thing to do
SVN-Revision: 22401
2010-07-27 21:04:43 +00:00
Felix Fietkau
900aaa919b ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528, without the ethernet fifo cfg values)
SVN-Revision: 22353
2010-07-22 12:37:44 +00:00
Felix Fietkau
bced5d7d74 ar71xx: set default values for the fifo cfg registers on AR724x
SVN-Revision: 22303
2010-07-20 01:54:11 +00:00
Gabor Juhos
95e09cccd8 ar71xx: in-flash macs and eeprom for mach-eap7660d
This adds in-flash mac-addresses and calibration data for the Senao
EAP7660D board.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 22187
2010-07-15 07:36:52 +00:00
Gabor Juhos
7bff9c0101 ar71xx: add support for the Senao EAP7660D board
This patch adds support for the Senao EAP7660D board to trunk.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 21837
2010-06-18 16:22:05 +00:00
Gabor Juhos
08c2e29018 ar71xx: avoid duplicated 'board' parameter in kernel command line
SVN-Revision: 21805
2010-06-14 20:02:44 +00:00
Gabor Juhos
9789f0215a ar71xx: nuke AR71XX_MACH_UBNT_AR71XX machtype
SVN-Revision: 21764
2010-06-12 13:20:39 +00:00
Gabor Juhos
adb0a95df1 ar71xx: fix phy_mask for the RB450
SVN-Revision: 21743
2010-06-09 19:48:35 +00:00
Gabor Juhos
d55ebf3a8a ar71xx: fix phy_mask on the RB433 for the IP17xx driver
SVN-Revision: 21728
2010-06-08 20:19:18 +00:00
Gabor Juhos
90e2b1ad6b ar71xx: fix 2.6.34 build errors
SVN-Revision: 21698
2010-06-07 09:18:13 +00:00
Gabor Juhos
115f845e53 ar71xx: fix nbg460n mtd partitions
This fixes the NBG460N/550N/550NH mtd partitions.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

SVN-Revision: 21443
2010-05-14 08:37:58 +00:00