Commit graph

2147 commits

Author SHA1 Message Date
Lorenzo Santina
1cde4395d0 hostapd: update wpa_supplicant mini config
Update the config file to the latest version.
Enabled flags are the same as before.

Removed NEED_80211_COMMON flag because it is not part
of config file, it is set by the hostapd upstream Makefile.

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[add punctuation to commit msg]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-28 00:27:26 +03:00
Lorenzo Santina
65113799d7 hostapd: update wpa_supplicant full config
Update the config file to the latest version.
Enabled flags are the same as before.

Commented CONFIG_IEEE80211W=y flag because it is
set in the Makefile, only if the driver supports it.

Removed NEED_80211_COMMON flag because it is not part
of config file, it is set by the hostapd upstream Makefile.

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[add punctuation to commit msg]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-28 00:27:14 +03:00
Lorenzo Santina
70ade53692 hostapd: update hostapd mini config
Update the config file to the latest version.
Enabled flags are the same as before.

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[add punctuation to commit msg]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-28 00:27:01 +03:00
Lorenzo Santina
7865e86b0e hostapd: update hostapd full config
Update the config file to the latest version.
Enabled flags are the same as before.

Removed flag CONFIG_WPS2 because it is no more
needed due to this changelog (2014-06-04 - v2.2):
"remove WPS 1.0 only support, i.e., WSC 2.0
support is now enabled whenever CONFIG_WPS=y is set".

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[add punctuation to commit msg]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-28 00:26:11 +03:00
Hans Dedecker
754659ddb5 curl: fix disable threaded resolver
Bump to 7.55.1 broke the disable threaded resolver feature as reported
in https://github.com/curl/curl/issues/1784.
As a result curl is always compiled with the threaded resolver feature
enabled which causes a dependency issue on pthread for uclibc.
Fix this issue by backporting the upstream curl commit which fixes
disable threaded resolver.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-09-27 17:33:48 +02:00
Stijn Tintel
456de21297 ipset: replace patch that was reverted upstream
Use the correct prefix for backports while at it.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-26 18:18:44 +03:00
Stijn Tintel
b0f8b13331 samba36: add Package/samba/Default
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-25 22:53:59 +03:00
Stijn Tintel
7e58392bcb ipset: bump to 6.34
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-25 22:52:46 +03:00
Stijn Tintel
d9beae9b9e curl: bump to 7.55.1
Update 200-no_docs_tests.patch.
Refresh patches.

Fixes the following CVEs:
- CVE-2017-1000099
- CVE-2017-1000100
- CVE-2017-1000101

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-25 07:42:34 +03:00
Stijn Tintel
2ad649d134 iperf: bump to 2.0.10
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-25 07:42:34 +03:00
Adrian Panella
ab26fc6c8d uhttp: update to latest version
3fd58e9 2017-08-19 uhttpd: add manifest support
88c0b4b 2017-07-09 file: fix basic auth regression
99957f6 2017-07-02 file: remove unused "auth" member from struct
path_info
c0a569d 2017-07-02 proc: expose HTTP_AUTH_USER and HTTP_AUTH_PASS
ad93be7 2017-07-02 auth: store parsed username and password
fa51d7f 2017-07-02 proc: do not declare empty process variables
a8bf9c0 2017-01-26 uhttpd: Add TCP_FASTOPEN support
e6cfc91 2016-10-25 lua: ensure that PATH_INFO starts with a slash

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2017-09-21 23:03:46 +02:00
Sven Roederer
ce53c0e718 openvpn: add "extra-certs" option
This option is used to specify a file containing PEM certs, to complete the
local certificate chain. Which is quite usefull for "split-CA" setups.

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-09-19 20:05:57 +08:00
Lorenzo Santina
b0d2c4ac41 hostapd: ft_over_ds support
Add support for ft_over_ds flag in ieee80211r

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
2017-09-18 21:24:10 +02:00
Lorenzo Santina
70593acdd5 hostapd: ft_psk_generate_local support
Add support for ft_psk_generate_local flag in ieee80211r

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[original author]
Signed-off-by: Sergio <mailbox@sergio.spb.ru>
2017-09-18 21:23:35 +02:00
Marcin Jurkowski
feab5fa51e dnsmasq: fix dhcp "ignore" option on wwan interfaces
Init script won't append --no-dhcp-interface option if interface
protocol is one of: ncm, directip, qmi, mbim.
This is caused by IP address assigned to dynamically created netifd
interfaces. As a result there's no netmask assigned to the main
interface and dhcp_add() function returns prematurely.

By moving network subnet check we can ensure that --no-dhcp-interface is
properly generated for wwan interfaces.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase; move network checks]
2017-09-18 10:14:34 +02:00
Stijn Tintel
2375e279a7 tcpdump: noop commit to refer CVEs fixed in 4.9.2
When bumping tcpdump from 4.9.1 to 4.9.2, I did not include the fixed
CVEs in the commit message. As the list of fixed CVEs is quite long,
we should probably mention them in the changelogs of the releases to
come. This commit will make sure this happens.

The following CVEs were fixed in 21014d9708:

CVE-2017-11541
CVE-2017-11541
CVE-2017-11542
CVE-2017-11542
CVE-2017-11543
CVE-2017-11543
CVE-2017-12893
CVE-2017-12894
CVE-2017-12895
CVE-2017-12896
CVE-2017-12897
CVE-2017-12898
CVE-2017-12899
CVE-2017-12900
CVE-2017-12901
CVE-2017-12902
CVE-2017-12985
CVE-2017-12986
CVE-2017-12987
CVE-2017-12988
CVE-2017-12989
CVE-2017-12990
CVE-2017-12991
CVE-2017-12992
CVE-2017-12993
CVE-2017-12994
CVE-2017-12995
CVE-2017-12996
CVE-2017-12997
CVE-2017-12998
CVE-2017-12999
CVE-2017-13000
CVE-2017-13001
CVE-2017-13002
CVE-2017-13003
CVE-2017-13004
CVE-2017-13005
CVE-2017-13006
CVE-2017-13007
CVE-2017-13008
CVE-2017-13009
CVE-2017-13010
CVE-2017-13011
CVE-2017-13012
CVE-2017-13013
CVE-2017-13014
CVE-2017-13015
CVE-2017-13016
CVE-2017-13017
CVE-2017-13018
CVE-2017-13019
CVE-2017-13020
CVE-2017-13021
CVE-2017-13022
CVE-2017-13023
CVE-2017-13024
CVE-2017-13025
CVE-2017-13026
CVE-2017-13027
CVE-2017-13028
CVE-2017-13029
CVE-2017-13030
CVE-2017-13031
CVE-2017-13032
CVE-2017-13033
CVE-2017-13034
CVE-2017-13035
CVE-2017-13036
CVE-2017-13037
CVE-2017-13038
CVE-2017-13039
CVE-2017-13040
CVE-2017-13041
CVE-2017-13042
CVE-2017-13043
CVE-2017-13044
CVE-2017-13045
CVE-2017-13046
CVE-2017-13047
CVE-2017-13048
CVE-2017-13049
CVE-2017-13050
CVE-2017-13051
CVE-2017-13052
CVE-2017-13053
CVE-2017-13054
CVE-2017-13055
CVE-2017-13687
CVE-2017-13688
CVE-2017-13689
CVE-2017-13690
CVE-2017-13725

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-18 01:33:40 +03:00
Florian Fainelli
ef485bb23d dnsmasq: Pass TARGET_CPPFLAGS to Makefile
With the introduction of the ubus notifications, we would now fail building
dnsmasq with external toolchains that don't automatically search for headers.
Pass TARGET_CPPFLAGS to the Makefile to resolve that.

Fixes: 34a206bc11 ("dnsmasq: add ubus notifications for new leases")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-09-16 16:38:19 -07:00
Alexandru Ardelean
d03c23c8d4 cyassl,curl,libustream-ssl: rename every cyassl to wolfssl
This is to eliminate any ambiguity about the cyassl/wolfssl lib.

The rename happened some time ago (~3+ years).
As time goes by, people will start to forget cyassl and
start to get confused about the wolfSSL vs cyassl thing.

It's a good idea to keep up with the times (moving forward).

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-09-17 00:00:12 +02:00
Alexandru Ardelean
ad510c4d62 wwan: json format in some modem definitions
Method used:
```
cd package/network/utils/wwan/files/data
sed -e 's/}}/}/g' -i *
sed -e 's/}\t"acm": 1/\t"acm": 1/g' -i *
sed -e 's/}\t"generic": 1/\t"generic": 1/g' -i *
```

Manually adjusted commas.
Validated with
```
for f in `ls` ; do echo $f ; python -m json.tool < $f || break ; done
```

Thanks to @lynxis for pointing out the commas.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-09-16 23:04:46 +02:00
Karl Palsson
ae57675bba odhcpd: don't enable server mode on non-static lan port
Instead of blindly enabling the odhcpd v6 server and RA server on the
lan port, only do that if the lan port protocol is "static"

This prevents the unhelpful case of a device being a dhcpv4 client and
v6 server on the same ethernet port.

Signed-off-by: Karl Palsson <karlp@etactica.com>
[PKG_SOURCE_DATE increase; odhcpd.defaults script cleanup]
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-09-16 09:37:50 +02:00
Hans Dedecker
c88770c766 odhcpd: update to git HEAD version
f0bce9c dhcpv4: fix memset compile issue
0ba3278 dhcpv4: rework assignment lookup
e3b49f3 dhcpv4: cleanup dhcpv4_test usage
47fe122 dhcpv4: rework lease expire handling logic
028ab85 dhcpv4: force renew nonce authentication support
a827fca dhcpv4: avoid segfault when there's no IPv4 prefix
bea088b ndp: detect ifindex changes via interface netlink events
f66103e ubus: display accept reconf status for DHCPv6 assignments
f0e354b treewide: replace RELAYD prefix naming in macros
1a313f9 dhcpv4: fix possible segfault when lease is not created
e2d6eb4 dhcpv4: dhcpv4: move interface lease list insertion out of dhcpv4_assign

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-09-13 22:32:52 +02:00
Lorenzo Santina
fd84ecda7d treewide: fix shellscript syntax errors/typos
Fix multiple syntax errors in shelscripts (of packages only)
These errors were causing many conditions to not working properly

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[increase PKG_RELEASE, drop command substitution from directip.sh]
Signed-off-by: Mathias Kresin <dev@kresin.em>
2017-09-13 08:07:54 +02:00
Stijn Tintel
21014d9708 tcpdump: bump to 4.9.2
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-11 01:56:14 +02:00
Stijn Tintel
910e3bed12 lldpd: bump to 0.9.8
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-09-11 01:56:14 +02:00
Lorenzo Santina
bd24d53ea2 hostapd: fix iapp_interface option
ifname variable were not assigned due to syntax error
causing the hostapd config file to have an empty iapp_interface= option

Signed-off-by: Lorenzo Santina <lorenzo.santina.dev@gmail.com>
2017-09-10 08:30:32 +02:00
Kevin Darbyshire-Bryant
5629904ea8 dnsmasq: backport arcount edns0 fix
Don't return arcount=1 if EDNS0 RR won't fit in the packet.

Omitting the EDNS0 RR but setting arcount gives a malformed packet.
Also, don't accept UDP packet size less than 512 in received EDNS0.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-09-08 10:07:04 +02:00
Kevin Darbyshire-Bryant
9a753c49ea dnsmasq: backport official fix for CVE-2017-13704
Remove LEDE partial fix for CVE-2017-13704.

Backport official fix from upstream.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (PKG_RELEASE increase)
2017-09-07 08:09:54 +02:00
Hans Dedecker
995193ccdb odhcp6c: add workaround for broken extendprefix scenario
Extendprefix is typically used to extend an IPv6 RA prefix from a mobile
wan link to the LAN; such scenario requires correct RA prefix settings
like the on link flag not being set.
However some mobile manufacter set the RA prefix on link flag which breaks
basic IPv6 routing.
Work around this issue by filtering out the route being equal to the
extended prefix.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-09-05 14:46:18 +02:00
Hans Dedecker
05c3647d35 odhcp6c: add ra_holdoff config option and update to git HEAD version (FS#964)
51733a6 ra: align RA update interval with RFC4861 (FS#964)

Add ra_holdoff config option which allows to configure the RA minimum
update interval which is by default 3 seconds as stated in RFC4861.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-09-03 21:34:48 +02:00
John Crispin
12930fc045 Revert "dropbear: Link ssh and scp command to /bin instead of /usr/bin"
This reverts commit f7528ed0a8.

Signed-off-by: John Crispin <john@phrozen.org>
2017-08-31 21:09:13 +02:00
Rosen Penev
f7528ed0a8 dropbear: Link ssh and scp command to /bin instead of /usr/bin
ssh and scp commands interfere with OpenSSH when installed in /usr/bin .

One use case is when installing dropbear to get root access when only OpenSSH is available (OpenSSH disallows root password logins). Once dropbear installs, it replaces OpenSSH's executables, even when removed with opkg. OpenSSH must be reinstalled to get them back.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2017-08-31 19:14:43 +02:00
Rosen Penev
343e3d2ba8 samba36: Remove syslog and load printers lines.
printer support is removed using 200-remove_printer_support.patch. the syslog parameter requires samba to be compiled with --with-syslog. Currently samba does not log to syslog and probably has not for a long time.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2017-08-30 18:12:48 +02:00
Rosen Penev
b2f60e6a72 samba36: Don't resolve interfaces.
It's redundant and also buggy. IPv6 link local addresses and ::1 are not resolved for example. Doesn't matter since lo and br-lan for example, resolve to them.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-08-30 17:05:10 +02:00
Rosen Penev
ccb79a310c samba36: Remove guest ok since LuCI configures it.
guest ok is set per share and as such, don't override it. also, fix an error introduced in the last commit.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2017-08-30 17:05:10 +02:00
Kevin Darbyshire-Bryant
ca79337306 dnsmasq: forward.c: fix CVE-2017-13704
Fix SIGSEGV in rfc1035.c answer_request() line 1228 where memset()
is called with header & limit pointing at the same address and thus
tries to clear memory from before the buffer begins.

answer_request() is called with an invalid edns packet size provided by
the client.  Ensure the udp_size provided by the client is bounded by
512 and configured maximum as per RFC 6891 6.2.3 "Values lower than 512
MUST be treated as equal to 512"

The client that exposed the problem provided a payload udp size of 0.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
2017-08-30 17:05:10 +02:00
Hans Dedecker
7a9410618d netifd: update to git HEAD version
7d94ede system-linux: parse map-e fmrs parameters as nested data json object

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-08-29 21:19:29 +02:00
Hans Dedecker
1b3ded7225 map: use nested json data object to store map-e fmrs parameters
Replace the string array containing the fmrs parameters by a nested data
json object holding an array of fmrs parameters

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-08-29 21:10:39 +02:00
Hans Dedecker
4b3ffecf2b map: fix boolean argument passed to blobmsg_check_attr in mapcalc
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-08-26 23:34:14 +02:00
Hans Dedecker
6c9e2d4a68 dnsmasq: fix indentation
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-08-25 14:29:19 +02:00
Kuang Rufan
1e6e37c4f6 dnsmasq: add support for multiple tags for each host.
Currently, dnsmasq support assigning multiple tags to a host record
(--dhcp-host), but we only support only 1 tag for a host. The commit
makes the following config to be valid:

  config host
      option name 'computer'
      option mac '00:11:22:33:44:55'
      option ip '192.168.1.100'
      list tag 'vendor_class'
      list tag 'vendor_id'

  config tag 'vendor_class'
      list dhcp_option 'option:vendor-class,00:...<omitted>'

  config tag 'vendor_id'
      option force '1'
      list dhcp_option 'option:vendor-id-encap,00:...<omitted>'

Signed-off-by: Kuang Rufan <kuangrufan@pset.suntec.net>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-08-25 14:28:49 +02:00
Hans Dedecker
7a8909411c map: add ealen as configurable uci parameter
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-08-24 20:56:07 +02:00
Koen Vandeputte
f47c41cff9 xtables-addons: update to version 2.13
Changes:

89d1b80 xt_condition: namespace support #2
c839e87 xt_geoip: check for allocation overflow
a587f95 compat_xtables: use more accurate printf format for NIPQUAD
1874fcd xt_DNETMAP: fix a buffer overflow
21ea7b7 xt_LOGMARK: resolve new gcc7 warnings
ee8da2b build: support for Linux 4.12
19a4359 xt_condition: add support for namespaces
1b37966 xt_psd: resolve compiler warning

Tested on cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-08-24 08:38:39 +02:00
John Crispin
d99c52765d Revert "iputils: switch to new upstream"
This reverts commit 77d3ac8e3e.
This reverts commit e665b3df2a.

Signed-off-by: John Crispin <john@phrozen.org>
2017-08-24 08:09:14 +02:00
Philip Prindeville
fc48aebdc1 iperf3: add SSL variant for iperf_auth feature
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-08-23 20:35:16 +02:00
Philip Prindeville
d55fff4ae7 iperf3: update to 3.2
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-08-23 20:35:16 +02:00
John Crispin
e665b3df2a iputils: update sha256sum
Signed-off-by: John Crispin <john@phrozen.org>
2017-08-23 19:34:24 +02:00
John Crispin
77d3ac8e3e iputils: switch to new upstream
Signed-off-by: John Crispin <john@phrozen.org>
2017-08-23 16:31:35 +02:00
Ansuel Smith
f099803eb5 samba36-net: new package
Samba could also be usefull for sending commands to windows pc (like shoutdown command). This new package add the bin to include this kind of command to the samba package.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2017-08-23 15:08:39 +02:00
Rafał Miłecki
8de57c9746 iwinfo: update to the latest git HEAD
c1a03e8 nl80211: request split information about frequencies
5638567 nl80211: store info about freq being not available for some bandwidths
ce51cb8 Allow storing more info about each frequency
5c10efa nl80211: support receiving split frequencies
335967c nl80211: improve error handling
ab089dd nl80211: propagate netlink errors to callers
7bba117 nl80211: handle netlink errors in nl80211_wait()
d22c64c iwinfo: add device id for Ubiquiti NanoStation Loco M2

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-08-23 11:19:28 +02:00
John Crispin
4cac13f8e2 Revert "xtables-addons: fix nathelper-rtsp dependencies"
This reverts commit e2ef80130e.

Signed-off-by: John Crispin <john@phrozen.org>
2017-08-23 09:54:53 +02:00
Philip Prindeville
e2ef80130e xtables-addons: fix nathelper-rtsp dependencies
Both nf_conntrack and nf_nat need to be called out.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-08-22 21:31:39 +02:00
John Crispin
34a206bc11 dnsmasq: add ubus notifications for new leases
Signed-off-by: John Crispin <john@phrozen.org>
2017-08-22 21:31:39 +02:00
John Crispin
d18e0dc7d1 hostapd: add additional ubus notifications
Signed-off-by: John Crispin <john@phrozen.org>
2017-08-22 21:31:39 +02:00
John Crispin
e622b30730 netifd: update to latest git HEAD
b5731bf allow setting rps/xps defualt values via uci
2a29d1a system: remove unused 6rd tunnel attributes
e627542 netifd: allow negative neighlocktime values
e41382c system-linux: parse ipv6 specific tunnel settings as nested data json object

Signed-off-by: John Crispin <john@phrozen.org>
2017-08-22 09:17:14 +02:00
Hans Dedecker
736950e947 odhcpd: update to latest git HEAD
94e65ee ndp: use IPv4 address list when comparing IPv4 addresses
ff5020d dhcpv6-ia: rework reconfigure accept logic

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-08-16 21:25:16 +02:00
Stijn Tintel
e7373e489d wpa_supplicant: log to syslog instead of stdout
While debugging an issue with a client device, wpa_supplicant did not
seem to log anything at all. Make wpa_supplicant log to syslog instead
of stdout, to make debugging easier and to be consistent with hostapd.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-08-10 16:35:53 +02:00
Hauke Mehrtens
779227d5ee nftables: remove date from version
We are using the normal 0.7 version of nftables, do not add an
additional date to the version number.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-08-09 23:20:56 +02:00
Martin Schiller
2da6c85c80 ltq-vdsl-app: add support for auto xfer_mode and auto line_mode
If xfer_mode is set to auto the vdsl_cpe_control daemon assumes that
ATM should be used for ADSL and PTM for VDSL.

xfer_mode and line_mode can be set to fixed value independantly from
each other.

The syntax for the tc_layer argument of vdsl_cpe_control is as follow:

-T<TcADSL>:<TcCfgUsADSL>:<TcCfgDsADSL>_<TcVDSL>:<TcCfgUsVDSL>:<TcCfgDsVDSL>

where TcADSL and TcVDSL can be: 1=ATM, 2=PTM/EFM, 4=Auto TC-Layer

and TcCfgUsADSL, TcCfgUsVDSL, TcCfgDsADSL, TcCfgDsVDSL can be:
1=64/65-octet encapsulation supported
2=64/65-octet encapsulation with pre-emption
3=64/65-octet encapsulation with short packets

Default: In case of no '-T' option is given, ADSL will be configured
in ATM and VDSL in PTM/EFM: -T1:0x1:0x1_2:0x1:0x1

The '-M' argument of dsl_cpe_control defines the initial DSL mode
(NextMode) for ADSL/VDSL multimode handling.

Possible Values: 0=API-default, 1=ADSL, 2=VDSL

Default: In case of no '-M' option is given, '0' (API-default) will
be selected.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-08-06 09:22:03 +02:00
Martin Schiller
f6254a215e ltq-vdsl-app: mask out ADSL bits when VDSL is requested
If the line_mode is fixed configured to vdsl, than only G.993 VDSL
should be used.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-08-06 09:22:03 +02:00
Martin Schiller
c6504327d1 ltq-vdsl-app: use notification based ATM/PTM driver load
This patch removes the fixed atm/ptm driver loading and
switches to notification based driver loading.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2017-08-06 09:22:03 +02:00
Mathias Kresin
a94555ce24 ltq-xdsl-app: drop esi call
The esi call was added to workaround a race condition between applying
a configured mac address to the wan interface and starting the protocol
(handler) as it was observed in a DHCP over ATM bridge configuration.

Martin Schiller, TDT GmbH was so kind to test with their local
infrastructure if the race condition still exists. The provided package
dumps captured behind the DSLAM shows that it doesn't. It was most
likely fixed with adding carrier support to the lantiq ptm/atm driver.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-08-06 09:22:03 +02:00
Hans Dedecker
fea89fa25b odhcpd: update to latest git HEAD (FS#402, FS#524)
296b4a0 dhcpv6: assign all viable DHCPv6 addresses by default (FS#402, FS#524)
f4d38e0 treewide: reflect managed mode is related to RA

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-08-03 21:25:32 +02:00
Daniel Engberg
911331ad0f tcpdump: Update to 4.9.1
Update tcpdump to 4.9.1

Fixes:
 * CVE-2017-11108: Fix bounds checking for STP.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-07-28 23:07:00 +02:00
Rosen Penev
9dcb3fe7eb samba36: Remove legacy options
Browseable is now set through LuCI per share, so remove it. Same with
writeable (inverted synonym for read only). domain master and preferred
master seem to be legacy settings for Windows 9x. encrypt passwords
defaults to yes. Probably should not be disabled either.

Also reordered alphabetically.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
[rewrap commit message, fix SoB, fix author, bump pkg revsion]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-07-22 16:55:01 +02:00
Stijn Tintel
97eb8abec0 netifd: update to git HEAD
d397e8c netifd: Fix printf calls + function declarations.
34afb76 system-linux: fix GRE ikey/okey endianness

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-07-21 22:00:37 +02:00
Alexandru Ardelean
d9f7ae6cdb ipset: split libipset as a subpackage
Intent is to link against it, and have the option to
not install the ipset utility (if needed).

One example/use-case is keepalived (from package)
feeds, where it would be nice to just depend on a
`libipset` (sub)package.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2017-07-21 15:12:48 +02:00
Jo-Philipp Wich
d0f6a514b1 dnsmasq: introduce config support for forced DHCP options
Introduce a new UCI list setting `list dhcp_option_force` which is available
in sections of type `dnsmasq` and `dhcp`.

The `dhcp_option_force` setting has the same semantics as `dhcp_option` but
generates `dhcp-option-force` directives instead of `dhcp-option` ones in
emitted native configuration.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-07-21 08:09:45 +02:00
Hans Dedecker
6f133a4402 dnsmasq: backport remove ping check of configured dhcp address
Remove ping check in DHCPDISCOVER case as too many buggy clients leave
an interface in configured state causing the ping check to fail.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-07-18 23:17:37 +02:00
Nick Brassel
eaf6f1532d nftables: Update to 0.7
Updated nftables to latest.

Signed-off-by: Nick Brassel <nick@tzarc.org>
2017-07-15 00:17:49 +02:00
Alif M. Ahmad
683e73735e
curl: bump to version 7.54.1
Upgrade the curl package to latest version. Patches refreshed.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2017-07-14 03:10:38 +02:00
Alin Nastac
d8748e537f netfilter: add iptables-mod-rpfilter package
Unlike /proc/sys/net/ipv4/conf/INTF/rp_filter flag, rule iptables -t raw
-I PREROUTING -m rpfilter --invert -j DROP prevents conntrack table to
become full when a packet flood with randomly selected source IP addresses
is received from the lan side.

Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
2017-07-11 22:09:57 +02:00
Jo-Philipp Wich
a89c36b508 dnsmasq: restore ability to include/exclude raw device names
Commit 5cd88f4 "dnsmasq: remove use of uci state for getting network ifname"
broke the ability to specify unmanaged network device names for inclusion
and exclusion in the uci configuration.

Restore support for raw device names by falling back to the input value
when "network_get_device" yields no result.

Fixes FS#876.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-07-10 11:02:27 +02:00
Thomas Nixon
08cd5b769d lantiq: set up DSL front-end GPIOs if they exist
This is necessary for devices using the PSB80108/VRX220LD front-end
(currently only known on the Netgear DM200).

Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
2017-07-07 07:13:24 +02:00
Hans Dedecker
e227bade26 odhcpd: update to the latest version
f0d78e7 ndp: optimize check_addr6_updates code
94afe3b ndp: fix syslog tracing for netlink neigbor and address events
18df6cc treewide: rework logic to retrieve IPv6 interface addresses
803b83e router: use enum to specify order and index of iov struct
5dad295 treewide: rework code to get rid of fixed IPv6 address arrays
3e4c8ad config: rework code to get rid of IFNAMSIZ usage
ab7813e treewide: use angle-brackets to include libubox header files

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-07-06 19:19:13 +02:00
DUPONCHEEL Sébastien
f3ae0f80bd dnsmasq: dnsmasq --rev-server support
This is functionally the same as --server, but provides some syntactic sugar to
make specifying address-to-name queries easier.

For example --rev-server=1.2.3.0/24,192.168.0.1 is exactly equivalent to
--server=/3.2.1.in-addr.arpa/192.168.0.1

Signed-off-by: DUPONCHEEL Sébastien <sebastien.duponcheel@corp.ovh.com>
2017-07-03 22:08:21 +02:00
Hans Dedecker
1d45ec2784 dhcpv6: add missing dollar sign in dhcpv6 script (FS#874)
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-06-29 09:56:19 +02:00
Hans Dedecker
7d31fe6068 dnsmasq: backport patch fixing DNS failover (FS#841)
Backport upstream dnsmasq patch fixing DNS failover when first servers
returns REFUSED in strict mode; fixes issue FS#841.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-06-28 11:33:42 +02:00
Stijn Tintel
6371159b4a dropbear: add option to set max auth tries
Add a uci option to set the new max auth tries paramater in dropbear.
Set the default to 3, as 10 seems excessive.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-06-28 02:18:20 +02:00
Kevin Darbyshire-Bryant
9aaf3d3501 dropbear: server support option '-T' max auth tries
Add support for '-T n' for a run-time specification for maximum number
of authentication attempts where 'n' is between 1 and compile time
option MAX_AUTH_TRIES.

A default number of tries can be specified at compile time using
'DEFAULT_AUTH_TRIES' which itself defaults to MAX_AUTH_TRIES for
backwards compatibility.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-06-28 02:18:20 +02:00
Yury Shvedov
37c1513b1f hostapd: configure NAS ID regardless of encryption
RADIUS protocol could be used not only for authentication but for
accounting too. Accounting could be configured for any type of networks.
However there is no way to configure NAS Identifier for non-WPA
networks without this patch.

Signed-off-by: Yury Shvedov <yshvedov@wimarksystems.com>
[cleanup commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-06-28 02:18:20 +02:00
Yury Shvedov
0e7bbcd43b hostapd: add acct_interval option
Make an ability to configure Accounting-Interim-Interval via UCI

Signed-off-by: Yury Shvedov <yshvedov@wimarksystems.com>
[add hostapd prefix, cleanup commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-06-28 02:18:20 +02:00
Hans Dedecker
f33de80232 dnsmasq: backport tweak ICMP ping logic for DHCPv4
Don't start ping-check of address in DHCP discover if there already
exists a lease for the address. It has been reported under some
circumstances android and netbooted windows devices can reply to
ICMP pings if they have a lease and thus block the allocation of
the IP address the device already has during boot.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-06-26 10:49:13 +02:00
Magnus Kroken
45f4f6649a openvpn: update to 2.4.3
Fixes for security and other issues. See security announcement for more details:
https://community.openvpn.net/openvpn/wiki/VulnerabilitiesFixedInOpenVPN243

* Remotely-triggerable ASSERT() on malformed IPv6 packet (CVE-2017-7508)
* Pre-authentication remote crash/information disclosure for clients (CVE-2017-7520)
* Potential double-free in --x509-alt-username (CVE-2017-7521)
* Remote-triggerable memory leaks (CVE-2017-7512)
* Post-authentication remote DoS when using the --x509-track option (CVE-2017-7522)
* Null-pointer dereference in establish_http_proxy_passthru()
* Restrict --x509-alt-username extension types
* Fix potential 1-byte overread in TCP option parsing
* Fix mbedtls fingerprint calculation
* openssl: fix overflow check for long --tls-cipher option
* Ensure option array p[] is always NULL-terminated
* Pass correct buffer size to GetModuleFileNameW() (Quarkslabs finding 5.6)

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2017-06-26 09:56:07 +02:00
Florian Eckert
4482063c34 treewide: add license tags
Add licence tags where missing.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2017-06-24 22:36:38 +02:00
Kevin Darbyshire-Bryant
4ed40be3e3 hostapd: add support for acs_chan_bias option
During auto channel selection we may wish to prefer certain channels
over others.

e.g. we can just squeeze 4 channels into europe so '1:0.8 5:0.8 9:0.8
13:0.8' does that.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-06-24 13:11:19 +02:00
Grégoire Delattre
680a5c5d3e dnsmasq: add dhcp-range tags configuration
dnsmasq can match tags in its dhcp-range configuration, this commit adds
the option to configure it in the dhcp section

uci configuration:
config dhcp 'lan'
        option interface 'lan'
        list tag 'blue'
        list tag '!red'
        option start '10'
        option limit '150'
        option leasetime '12h'

generated dnsmasq configuration:
dhcp-range=tag:blue,tag:!red,set:lan,192.168.1.10,192.168.1.159,255.255.255.0,12h

Signed-off-by: Grégoire Delattre <gregoire.delattre@gmail.com>
2017-06-20 22:33:41 +02:00
Hans Dedecker
c885482080 netifd: update to the latest version
ef5f7a0 ubus: remove superfluous error check in netifd_add_dynamic
5a68693 iprule: coding style line up
90e2e2c iprule: Add option to suppress unspecific routing lookups

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-06-18 22:22:03 +02:00
Kevin Darbyshire-Bryant
8f4085e2fd dropbear: fix service trigger syntax error
The classic single '&' when double '&&' conditional was meant.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-06-16 12:05:25 +02:00
Hans Dedecker
8180bbac7c Revert "dnsmasq: manage resolv.conf if when listening on 127.0.0.1#53"
This reverts commit a53f8ba677.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-06-14 22:51:08 +02:00
Paul Oranje
a53f8ba677 dnsmasq: manage resolv.conf if when listening on 127.0.0.1#53
With this patch the dnsmasq init script manages resolv.conf if and only if
when dnsmasq will listen on 127.0.0.1#53 (is main resolver instance).
Also, resolvfile is now set irrespective of the value of noresolv.

Fixes (partially) FS#785

Signed-off-by: Paul Oranje <por@xs4all.nl>
2017-06-12 11:08:21 +02:00
Kevin Darbyshire-Bryant
16a905b322 dnsmasq: make bind-dynamic 'non-wildcard' interfaces default
'non-wildcard' interfaces enables dnsmasq's '--bind-dynamic' mode.  This
binds to interfaces rather than wildcard addresses *and* keeps track of
interface comings/goings via a unique Linux api.

Quoting dnsmasq's author "bind-dynamic (bind individual addresses, keep
up with changes in interface config) ... On linux, there's actually no
sane reason not to use --bind-dynamic, and it's only not the default for
historical reasons."

Let's change history, well on LEDE at least, and change the default!

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-06-11 14:50:04 +02:00
Hans Dedecker
8b486ec2b5 dnsmasq: add dhcp-script hook conditionally
Commit b32689afd6 added support for dhcp-script hook.
Adding dhcp-script config option results into two instances of dnsmasq being run
which triggered oom issues on platforms having low memory.

The dnsmasq dhcp-script config option will now only be added if at least one of the
dhcp, tftp, neigh hotplug dirs has a regular hotplug file or if the dhcpscript uci
config option is specified.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-06-09 16:44:04 +02:00
Andrea Merello
860e053b29 Lantiq: make possible to tweak DSL SRN from UCI
This patch makes possible to tweak the downstream SNR margin on
Lantiq DSL devices.

The UCI parameter 'network.dsl.ds_snr_offset' is used to set the SNR
margin offset. It accepts values in range -50 to +50 in 0.1 dB units.

The SNR margin can thus be modified in range -5.0 to +5.0 dB in 0.1 dB
steps.

Currently this should only affect ADSL (not VDSL). It should be very
easy to make this work also on VDSL lines, but since I couldn't test
on VDSL lines this patch does not do that yet.

I have also a patch for LUCI about this, that I could submit.

Tested on FB3370 (Lantiq VR9) and Telecom Italia ADSL2+ line.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
2017-06-03 17:48:57 +02:00
Jo-Philipp Wich
6db1d13084 umdns: remove superfluous include in init script
The umdns init script includes function/network.sh globally, outside of any
service procedure. This causes init script activation to fail in buildroot
and IB context if umdns is set to builtin.

Additionally, the network.sh helper is not actually used.

Drop the entire include in order to repair init script activation in build
host context. Fixes FS#658.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-06-02 01:29:32 +02:00
Kevin Darbyshire-Bryant
1fe41c4089 dnsmasq: bump to 2.77
Bump to the 2.77 release after quite a few test & release candidates.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-06-01 23:50:52 +02:00
Hans Dedecker
21f25bc4a3 ppp: propagate master firewall zone to dynamic slave interface
Assign the virtual DHCPv6 interface the firewall zone of the parent interface
so fw3 knows the zone to which the virtual DHCPv6 interface belongs.
This guarantees the firewall settings are applied correctly for the virtual
DHCPv6 interface and allows to query the zone to which the virtual DHCPv6
interface belongs via the fw3 network option.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-05-31 16:49:59 +02:00
Luiz Angelo Daros de Luca
b4f463d969 openvpn-easy-rsa: update to 3.0.1
easy-rsa v3 is now a single script. It expects a 'vars'
configuration file which path can be set using easy-rsa
options, environment variables or just looking in the
current directory.

The default usage would be:

 # cd /etc/easy-rsa
 # easy-rsa COMMAND [command-options]

Following upstream changes, /etc/easy-rsa/pki replaces
/etc/easy-rsa/keys directory.

The default /etc/easy-rsa/pki dir is marked to be kept during
upgrade (WARN: priv keys are saved in the system backup)
/etc/easy-rsa/openssl.1.0.cnf is now marked as config file while
index and serial got removed.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
2017-05-31 00:28:26 +02:00
Kevin Darbyshire-Bryant
a4198f8c8d iproute2: bump to 4.11
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-05-30 14:00:31 +02:00
Jo-Philipp Wich
61eb18d3f7 firewall: fix stray continue statement
The previous commit introduced a faulty continue statement which might
lead to faulty rules not getting freed or reported.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-27 16:16:15 +02:00
Hans Dedecker
1422dab66e netifd: fix 6rd regression (FS#812)
08f1875 system-linux: fix 6rd regression

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-05-27 13:26:39 +02:00