Commit graph

26468 commits

Author SHA1 Message Date
Jonas Gorski
d513c07d2f brcm63xx: fix typo breaking build in r39325
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39326
2014-01-19 14:00:18 +00:00
Jonas Gorski
66ec204935 brcm63xx: set usb host port number for some devices
Update a few devices with their actual port numbers, especially those
with two ports.

Should allow properly using the second port on the Neufboxen and HW553
and HW556.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39325
2014-01-19 13:46:25 +00:00
Jonas Gorski
ef81c6a268 brcm63xx: allow setting the number of usb host ports for boards
Allow setting the number of available usb host ports for boards with
additional sanity checks to allow using the second port on devices
where it is available.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39324
2014-01-19 13:46:14 +00:00
Jonas Gorski
6b3e1c8de6 brcm63xx: add USB support for BCM63268
Add and enable USB support for the BCM63268 family of SoCs.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39323
2014-01-19 13:46:05 +00:00
Jonas Gorski
33f426c795 brcm63xx: BCM6318 needs to select _HAS_OHCI/EHCI too
USB will fail to work if compiling with BCM6318 only if BCM63XX_HAS_EHCI
and BCM63XX_HAS_OHCI are not selected.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39322
2014-01-19 13:45:55 +00:00
Jonas Gorski
52b7f55cb3 brcm63xx: prevent usb clock state inconsistency on BCM6318
Return the same clock for usbh and usbd on BCM6318 to prevent the clock
getting disabled despite being supposed to be enabled, e.g. by the
following sequence:

	clk_enable(usbh); <- usbh->usage = 1, enabled
	clk_enable(usbd); <- usbd->usage = 1, enabled (no effect)
	clk_disable(usbd); <- usbd->usage = 0,  -> disabled!

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39321
2014-01-19 13:45:42 +00:00
Imre Kaloz
b6e1cbd8dd generate images for the On Networks N150 (rebranded Netgear WNR612v2)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39320
2014-01-18 19:44:40 +00:00
Steven Barth
471095f869 odhcpd: Fix a memory corruption when static leases are used
SVN-Revision: 39319
2014-01-18 10:11:03 +00:00
John Crispin
f18112883f sysupgrade: do not kill any processes in failsafe
sysugrade killed the lock causing failsafe to stop

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 39318
2014-01-17 22:12:05 +00:00
John Crispin
63a4342568 usbmode: update usb-modeswitch-data version to 20131113
https://dev.openwrt.org/ticket/14762

Signed-off-by: Alif M. Ahmad <ama_alif@yahoo.co.id>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39317
2014-01-17 21:45:55 +00:00
John Crispin
cd90b6242c ubox: update to latest git
- fix duplicate device wildcard
- fix elf 64bit elf parsing

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39316
2014-01-17 21:35:32 +00:00
Steven Barth
24ba434185 odhcpd: be even less verbose and don't start unnecessary relays
SVN-Revision: 39315
2014-01-17 19:05:54 +00:00
Steven Barth
2c9d868900 odhcpd: fix logspam
SVN-Revision: 39314
2014-01-17 15:53:43 +00:00
Steven Barth
17b0d874eb odhcpd: use hybrid management mode by default
SVN-Revision: 39313
2014-01-17 15:48:02 +00:00
Steven Barth
9ec0e5df14 dnsmasq: add dnsmasq.d config folder & improve odhcpd coexistence
SVN-Revision: 39312
2014-01-17 14:00:09 +00:00
Steven Barth
140a5b22d9 odhcp6c: Use sourcerouting by default
SVN-Revision: 39311
2014-01-17 14:00:04 +00:00
Steven Barth
570eb45f23 odhcp6c: fix several small issues + decrease size
SVN-Revision: 39310
2014-01-17 14:00:00 +00:00
Steven Barth
32b3aa076c target: replace 6relayd with odhcpd by default
SVN-Revision: 39309
2014-01-17 13:59:55 +00:00
Steven Barth
684537f3e7 odhcpd: several bugfixes and improved integration
SVN-Revision: 39308
2014-01-17 13:59:51 +00:00
Steven Barth
a5ee266cd9 6in4, 6rd, 6to4: Use source-restricted routes by default
SVN-Revision: 39307
2014-01-17 13:59:47 +00:00
Steven Barth
bc8412b90e netifd: Add IFUPDATE-flags and use main IPv6 routing table again
SVN-Revision: 39306
2014-01-17 13:59:40 +00:00
John Crispin
9e39cd9503 kexec: bump to latest head revision
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39305
2014-01-17 13:57:25 +00:00
Florian Fainelli
0650ce9ec4 brcm63xx: do not add twice the same field to board
Changeset r39302 updated a board section and added twice .has_ehci0,
this is not necessary, so fix it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39304
2014-01-16 00:45:19 +00:00
John Crispin
053d596297 lantiq: Add support for Astoria ARV7510PW22
This board is pretty similar to ARV752DPW22.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 39303
2014-01-15 19:16:51 +00:00
Florian Fainelli
bf4f1feb7a brcm63xx: add USB support to BCM6318
BCM6318 has a special initialization sequence which involves touching
PLL control registers in the USBH_PRIV register space, as well as
toggling a bit the Simulation control register.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39302
2014-01-15 19:05:57 +00:00
Luka Perkov
a467c52eca mvebu: fix build failures when initramfs is not selected
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39301
2014-01-15 18:38:51 +00:00
John Crispin
a844275f37 firewall: improve logging in hotplug script
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 39300
2014-01-15 18:29:59 +00:00
John Crispin
f3a243c3dd ramips: Add profile for the Edimax BR-6475nD
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>

SVN-Revision: 39299
2014-01-15 18:29:51 +00:00
John Crispin
beb29461ff ramips: Add userspace support for the Edimax BR-6475nD
The rt2x00 wifi driver may still need updating to
function with this device.

Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>

SVN-Revision: 39298
2014-01-15 18:29:44 +00:00
John Crispin
62dd252b86 ramips: rt3883: Fix a typo in rt3883.dtsi
Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org>

SVN-Revision: 39297
2014-01-15 18:29:03 +00:00
Luka Perkov
26dcf1c7c9 lantiq: update kernel configuration
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39296
2014-01-15 14:11:36 +00:00
Zoltan Herpai
c87513de6b packages: ifenslave: add kernel dependencies as source was removed from 3.12
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39295
2014-01-15 09:28:41 +00:00
Florian Fainelli
3114410a13 brcm63xx: fix BCM96318MVWG LEDs
Power LED is not active low, and ppp-fail is red, not green.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39294
2014-01-15 00:06:08 +00:00
Florian Fainelli
1f7edcf637 brcm63xx: remove config-3.11
This was not supposed to be committed, remove it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39293
2014-01-15 00:05:51 +00:00
Florian Fainelli
bd540554a4 brcm63xx: 96368MVWG supports USB gadget, enable it
Enable the use of the USB gadget device at the board level so we can use
bcm63xx_udc on this board.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39292
2014-01-14 23:56:46 +00:00
Florian Fainelli
092a7105ec brcm63xx: replace gadget driver build fix with upstream submission
Also fixing a build warning due to a misplaced parenthesis in the
previous submission.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39291
2014-01-14 23:56:28 +00:00
Hauke Mehrtens
45e3898a11 gpio-button-hotplug: add wwan button
The wimax key will be used as a generic wwan key starting with Linux
3.13. The brcm47xx target uses this key for the 3g buttons. Also remove
the ifdef around KEY_WPS_BUTTON, this is in the kernel for a long time
now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39290
2014-01-14 23:11:10 +00:00
Hauke Mehrtens
bf662d7cb0 packages: kernel: reverse kernel dependencies logic
This will select the correct dependencies also for more recent kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39289
2014-01-14 22:51:30 +00:00
John Crispin
4ae2d6f293 hostapd: fix mcast_rate setting
Introduced by ("netifd: add wireless configuration support and port mac80211 to
the new framework")

Reported-by: René van Weert <r.vanweert@sowifi.com>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>

SVN-Revision: 39288
2014-01-14 19:35:55 +00:00
Zoltan Herpai
795db05efb ipt-tproxy: nf_tproxy_core was moved out of 3.12, adding a check for kernel version
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39287
2014-01-14 14:09:35 +00:00
Florian Fainelli
01f465df05 brcm63xx: add support for the BCM96318REF_P300 board
Very similar to the BCM96318REF board except for the name and the
SDRAM/DDR configuration which is totally transparent for us.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39286
2014-01-14 05:24:19 +00:00
Florian Fainelli
c104e863d3 busybox: enable the devmem applet
The devmem applet allows poking at HW registers and as such is a
valuable tool to have to avoid recompiling kernels or resorting to
external HW adapters to modify HW behavior.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39285
2014-01-14 05:24:09 +00:00
Florian Fainelli
6f48336dc4 brcm63xx: enable 6318 support
BCM6318 support is usable enough to be enabled by default, turn it on.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39284
2014-01-14 05:23:58 +00:00
Florian Fainelli
93ab8adef2 brcm63xx: add basic support for the BCM96318REF board
Add basic support for the BCM96318REF board which is comprised of:
- HS-SPI flash support
- Ethernet switch support
- USB slave device support

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39283
2014-01-14 05:23:49 +00:00
Florian Fainelli
0ecdc42f60 brcm63xx: improve BCM6318 support
Provide clock toggling for the USB host and slave controller as well as
for the Ethernet Switch. The bcm63xx_enetsw driver is changed not to use
request_mem_region() as the Roboswitch register overlaps with the
Roboswitch IUDMA channels, hence making the driver return -EBUSY. A
future fix might be to use variable size RSET_ENETSW sizes depending on
the chip we are targetting.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39282
2014-01-14 05:23:39 +00:00
Florian Fainelli
7951993efd brcm63xx: package the USB gadget module (bcm63xx_udc)
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39281
2014-01-14 05:23:20 +00:00
Florian Fainelli
8bdc92f5d6 brcm63xx: target supports USB gadget devices
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39280
2014-01-14 05:23:08 +00:00
Florian Fainelli
fb8ae05760 brcm63xx: fix USB gadget build failure after 6345 Ethernet
While adding support for BCM6345 Ethernet, some changes in the macros
ENETDMA{C,S} where introduced which now make the bcm63xx USB gadget
driver fail to build. Fix this.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39279
2014-01-14 05:22:59 +00:00
Florian Fainelli
a6425f8437 brcm63xx: allow HSSPI registration on 6318
A missing condition check in dev-hsspi.c prevented the controller from
being registered on 6318 where it is fully functional.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39278
2014-01-14 05:22:45 +00:00
Florian Fainelli
49ae212eee brcm63xx: fix build failure on varid
varid might both unused and unitialized when building for e.g: bcm6318,
fix these two warnings turned into errors.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39277
2014-01-14 05:22:31 +00:00