Commit graph

41298 commits

Author SHA1 Message Date
Felix Fietkau
1cd76e2d85 netifd: update to the latest version (fixes FS#1358)
1f5a29c ip: do not add local routes for host dependencies
c06f842 device: add support for setting the isolate options for bridge ports
69aeaab interface-ip: fix route selection for host dependencies

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-03-13 13:35:05 +01:00
John Crispin
d57ca53ff9 Revert "ramips: gpio: fix compilation if CONFIG_GPIO_SYSFS=n"
This reverts commit cff2dedebc.

This patch causes build issues

Signed-off-by: John Crispin <john@phrozen.org>
2018-03-13 13:10:21 +01:00
Rafał Miłecki
9004fc3c76 kernel: b53: drop support for old location of bcm47xx_nvram.h
In kernels 4.0 and older that header file was located in some subdir of
arch/mips/include. Target brcm47xx supports kernels 4.4 and 4.9 only so
that code isn't needed anymore.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-03-13 12:01:36 +01:00
André Draszik
cff2dedebc ramips: gpio: fix compilation if CONFIG_GPIO_SYSFS=n
If CONFIG_GPIO_SYSFS=n, compilation fails with
  drivers/built-in.o: In function `gpio_export_with_name':
  include/asm-generic/gpio.h:128: undefined reference to `__gpiod_export'

This is because the stub in that case has the wrong name,
_gpiod_export() - note the missing underscore (_) at the
start.

Fix the stub, and add the correct prototype for the real
implementation.

Signed-off-by: André Draszik <git@andred.net>
2018-03-13 08:34:58 +01:00
Felix Fietkau
4fd8722056 toolchain/binutils: exclude .rej files when unpacking the tarball
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-03-12 21:29:24 +01:00
Felix Fietkau
15e9639159 toolchain/binutils: remove version 2.28
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-03-12 20:06:09 +01:00
Hauke Mehrtens
c7ced2f4a4 binutils: Use version 2.29.1 by default
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-12 20:04:45 +01:00
Felix Fietkau
092d75aa3e ppp: make ppp-multilink provide ppp
Fixes dependencies on ppp from other packages

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-03-12 20:02:29 +01:00
Felix Fietkau
e28551b103 toolchain/binutils: add support for version 2.30
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-03-12 20:01:07 +01:00
Felix Fietkau
d85a7f1eb2 uboot-fritz4040: fix build with gcc7
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-03-12 19:31:50 +01:00
Felix Fietkau
ed3860c3e3 swconfig: convert swdevs_lock from spinlock to mutex
Should fix some sleep-while-atomic issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-03-12 12:50:46 +01:00
Matthias Schiffer
b8d9a064f0
busybox: remove i386-specific build flags
busybox tries to be smart and passes a number of additional flags to the
compiler. Unfortunately, the i386-specific flags break ABI compatiblity
with libc.

Fixes busybox crashes observed on x86-generic with GCC 7.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-03-12 12:49:03 +01:00
Felix Fietkau
61eee1adfb toolchain/gcc: switch to version 7 by default
Newer GCC versions are reported to improve code size on various ARM
devices, which is why newer u-boot versions require them now.
There have also been user reports of data corruption issues fixed on
MIPS by updating from GCC 5 to GCC 7.

This update was previously held up by these two MIPS compile issues,
which have since been fixed:

https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83496
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84790

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-03-12 12:19:23 +01:00
Felix Fietkau
16cec7ae67 toolchain/gcc: merge pending fix for miscompiled MIPS16 code issue (GCC PR 84790)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-03-12 12:19:07 +01:00
Felix Fietkau
fe98f2679c toolchain/gcc: fix a build failure on 7.3.0 with macOS
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-03-12 12:19:03 +01:00
Hauke Mehrtens
87606e25af musl: update to version 1.1.19
This updates musl from a commit between 1.1.18 and 1.1.19 to the final
release of the version 1.1.19.
This mostly fixes bugs in musl.

The size of the uncompressed binary is increased by about 4 KB.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-11 23:42:38 +01:00
Felix Fietkau
9306bdf31c kernel: merge a pending fix for HFSC warnings/slowdowns (fixes FS#1136)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-03-11 08:58:53 +01:00
Felix Fietkau
4e8f1e9f4c kernel: unroll MIPS r4k cache blast function
Optimize the compiler output for larger cache blast cases that are
common for DMA-based networking.

On ar71xx, I measured a routing throughput increase of ~8%

Signed-off-by: Ben Menchaca <ben.menchaca@qca.qualcomm.com>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-03-10 11:58:19 +01:00
Felix Fietkau
916277a033 mac80211: minstrel: make short preamble CCK available when not used at connect time
The BSS short preamble state can change without rate control
update notification.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-03-10 11:57:42 +01:00
Felix Fietkau
6011f7bcf0 mac80211: fix a tx queue memory accounting error
Fixes rare hard to trigger tx hangs after some time

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-03-10 10:20:45 +01:00
Hauke Mehrtens
b7b14fd64e sunxi: Fix B53 swconfig driver for Lamobo R1
This reverts the changes needed for the upstream b53 DSA switch driver
to use the OpenWrt b43 swconfig switch driver instead.

Tested-by: TheWerthFam <thewerthfam@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-10 01:15:22 +01:00
Antony Antony
d6634edfc1 sunxi: NanoPi NEO Plus2 backport Gigabit Ethernet DT node
Kernel 4.16 commit 27d7f9297027

Signed-off-by: Antony Antony <antony@phenome.org>
2018-03-10 01:15:22 +01:00
Tomasz Maciej Nowak
584d7c53bd mvebu: new subtarget cortex A53
This commit introduces new subtarget for Marvell EBU Armada Cortex A53
processor based devices.

The first device is Globalscale ESPRESSObin. Some hardware specs:

SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53
     processor up to 1.2GHz
RAM: 512MB, 1GB or 2GB DDR3
Storage: SATA interface
         µSD card slot with footprint for an optional 4GB EMMC
         4MB SPI NOR flash for bootloader
Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports
Connectors: USB 3.0
            USB 2.0
            µUSB port connected to PL2303SA (USB to serial bridge
            controller) for UART access
Expansion: 2x 46-pin GPIO headers for accessories and shields with
           I2C, GPIOs, PWM, UART, SPI, MMC, etc
           MiniPCIe slot
Misc: Reset button, JTAG interface

Currently booting only from µSD card is supported.
The boards depending on date of dispatch can come with various U-Boot
versions. For the newest version 2017.03-armada-17.10 no manual
intervention should be needed to boot OpenWrt image. For the older ones
it's necessary to modify default U-Boot environment:

 1. Interrupt boot process to run U-Boot command line,

 2. Run following commands:
    (for version 2017.03-armada-17.06 and 2017.03-armada-17.08)
     setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000"
     saveenv

    (for version 2015.01-armada-17.02 and 2015.01-armada-17.04)
     setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait"
     setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}"
     saveenv

 3. Poweroff, insert SD card with OpenWrt image, boot and enjoy.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2018-03-10 01:15:22 +01:00
Hauke Mehrtens
be3da900cd mvebu: Add subtarget for Cortex A9 build
This is in preparation for adding a subtarget for the Cortex A53 later.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-10 01:15:21 +01:00
Ryan Mounce
9f3f61a0d9 mvebu: add support for Turris Omnia
Adds support for the Turris Omnia and builds an eMMC sysupgrade image in
the same format as the SolidRun ClearFog.

An initramfs image in the simple yet Omnia-specific 'medkit' image format
is also built in order to ease the initial flashing process.

Notable hardware support omissions are support for switching between SFP
cage and copper PHY, and RGB LED control.

Due to a current limitation of DSA, only 1/2 CPU switch uplinks are used.

Specifications:
- Marvell Armada 385 1.6GHz dual-core ARMv7 CPU
- 1GB DDR3 RAM
- 8GB eMMC Flash
- 5x Gigabit LAN via Marvell 88E6176 Switch (2x RGMII CPU ports)
- 1x switchable RJ45 (88E1514 PHY) / SFP SGMII WAN
- 2x USB 3.0
- 12x dimmable RGB LEDs controlled by independent MCU
- 3x Mini PCIe slots
- Optional Compex WLE200N2 Mini PCIe AR9287 2x2 802.11b/g/n (2.4GHz)
- Optional Compex WLE900VX Mini PCIe QCA9880 3x3 802.11ac (2.4 / 5GHz)
- Optional Quectel EC20 Mini PCIe LTE modem

Flash instructions:
If the U-Boot environment has been modified previously (likely manually via
serial console), first use serial to reset the default environment.
=> env default -a
=> saveenv

Method 1 - USB 'medkit' image w/o serial
- Copy openwrt-mvebu-turris-omnia-sysupgrade.img.gz and
omnia-medkit-openwrt-mvebu-turris-omnia-initramfs.tar.gz to the root of a
USB flash drive formatted with FAT32 / ext2/3/4 / btrfs / XFS.
Note that the medkit MUST be named omnia-medkit*.tar.gz
- Disconnect other USB devices from the Omnia and connect the flash drive
to either USB port.
- Power on the Omnia and hold down the rear reset button until 4 LEDs are
illuminated, then release.
- Wait approximately 2 minutes for the Turris Omnia to flash itself with
the temporary image, during which LEDs will change multiple times.
- Connect a computer to a LAN port of the Turris Omnia with a DHCP client
- (if necessary) ssh-keygen -R 192.168.1.1
- ssh root@192.168.1.1
$ mount /dev/sda1 /mnt
$ sysupgrade /mnt/openwrt-mvebu-turris-omnia-sysupgrade.img.gz
- Wait another minute for the final OpenWrt image to be flashed. The Turris
Omnia will reboot itself and you can remove the flash drive.

Method 2 - TFTP w/ serial
- Extract omnia-medkit-openwrt-mvebu-turris-omnia-initramfs.tar.gz and copy
dtb + zImage to your TFTP server (rename if desired)
- Connect Turris Omnia WAN port to DHCP-enabled network with TFTP server
- Connect serial console and interrupt U-Boot
=> dhcp
=> setenv serverip <tftp_server_ip_here>
=> tftpboot 0x01000000 zImage
=> tftpboot 0x02000000 dtb
=> bootz 0x01000000 - 0x02000000
- OpenWrt will now boot from ramdisk
- Download openwrt-mvebu-turris-omnia-sysupgrade.img.gz to /tmp/
$ sysupgrade /tmp/openwrt-mvebu-turris-omnia-sysupgrade.img.gz
- Wait another minute for the final OpenWrt image to be flashed. The Turris
Omnia will reboot itself.

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
2018-03-10 01:15:21 +01:00
Ryan Mounce
657ce9231d mvebu: generate ramdisk image by default
ramdisk images must be used in the installation process for upcoming
Turris Omnia support.

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
2018-03-09 22:19:11 +01:00
Ryan Mounce
7b33f6c1bb mvebu: disable DSA DT nodes for boards using mvsw61xx
As at this commit, DSA is not enabled in the kernel config for mvebu, so these
nodes have been ignored. In preparation for the first mvebu board using DSA,
disable these nodes for existing boards to avoid issues.

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
2018-03-09 22:19:07 +01:00
Henryk Heisig
21486911ac firmware: ath10k-firmware: update QCA9984 firmware to 10.4-3.5.3-00053
This patch updates ath10k-firmware to use the
firmware-5.bin_10.4-3.5.3-00053 firmware for the QCA9984.

The update fixes "ath10k_pci 0001:01:00.0: Invalid VHT mcs 15 peer
stats" spamming the kernel ring buffer at very high frequencies, but
introduces the new "ath10k_pci 0001:01:00.0: Unknown eventid: 36925".
This new warning doesn't appear to cause problems in practice and is
only emitted relatively rarely, not causing dmesg to overflow within
minutes.

Tested on the ZyXEL NBG6817; early feedback also suggests this firmware
to work well (with the same fixes and caveats) on the Netgear r7800 as
well.

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2018-03-09 22:15:02 +01:00
Henryk Heisig
11b476f925 firmware: ath10k-firmware: update to 2018-02-09
This patch updates ath10k-firmware to last commit and use the
firmware-5.bin_10.4-3.5.3-00053 firmware for the QCA9888.

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2018-03-09 22:15:01 +01:00
Toni Uhlig
57468c7142 util-linux: added unshare and nsenter executables
Signed-off-by: Toni Uhlig <matzeton@googlemail.com>
2018-03-09 22:15:01 +01:00
Philip Prindeville
61e0af06d9 iperf3: update to 3.5
Get rid of patches which are already upstream.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2018-03-09 22:13:22 +01:00
Ansuel Smith
a9c00578b5 e2fsprogs: bump to 1.44.0
Fix compilation error

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2018-03-09 22:13:21 +01:00
Magnus Kroken
ffbe51b294 openvpn: update to 2.4.5
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-03-09 22:13:21 +01:00
Stijn Segers
dc7f2fdd52 linux-firmware: bump firmware for Intel Wireless 8260AC to version 31
Bump the firmware for 8260AC and related hardware to version 31.

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
2018-03-09 22:13:21 +01:00
Koen Vandeputte
cfc5867bce kernel: bump 4.9 to 4.9.86
- Refreshed all patches
- Removed 1 patch which got upstreamed

Compile tested on: ar71xx (Rocket M5, Mikrotik RB2011)
Runtime tested on: ar71xx (Rocket M5, Mikrotik RB2011)

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-03-09 22:13:19 +01:00
Kabuli Chana
7c1dae6e26 kernel: bump to version 4.14.25
compile/test target mvebu/rango

Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
2018-03-09 22:12:48 +01:00
Felix Fietkau
fa22714181 ar71xx: fix double registration of usb host mode devices, add usb client support for qca955x
Only register the chipidea usb device if the strapping option indicates
device mode. If not, use the regular ehci platform driver.

Add qca955x device mode support, tested on 8devices Rambutan.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-03-09 18:25:57 +01:00
Matthias Schiffer
643850f568
inclue/image.mk: fix package installation for per-device rootfs
Fixes FS#1421.

Fixes: 2fbf669730 ("imagebuilder: reuse rootfs preparation from rootfs.mk")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-03-09 08:18:54 +01:00
Hans Dedecker
332b736a3e ebtables: update to latest git 2018-01-17
068ba95 Fix locking if LOCKDIR does not exist

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-03-08 21:16:24 +01:00
Florian Fainelli
30d42f85ae uml: Remove 4.4 patches
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-03-08 11:44:26 -08:00
Stijn Tintel
7cc9914aae firewall: bump to git HEAD
392811a ubus: let fw3_ubus_address() return the number of resolved addresses
359adcf options: emit an empty address item when resolving networks fails
503db4a zones: disable masq when resolving of all masq_src or masq_dest items failed
f50a524 helpers: implement explicit CT helper assignment support
a3ef503 zones: allow per-table log control
8ef12cb iptables: fix possible NULL pointer access on constructing rule masks

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-03-08 02:40:30 +02:00
Matthias Schiffer
057369ae1f
base-files: tune fragment queue thresholds for available system memory
The default fragment low/high thresholds are 3 and 4 MB. On devices with
only 32MB RAM, these settings may lead to OOM when many fragments that
cannot be reassembled are received. Decrease fragment low/high thresholds
to 384 and 512 kB on devices with less than 64 MB RAM.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-03-07 19:14:22 +01:00
Rafał Miłecki
6c194078db bcm53xx: include patch adding WZR-900DHP LEDs support
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-03-07 17:01:07 +01:00
Matthias Schiffer
359273d7f6
include/package-defaults.mk: fix default Build/Prepare with empty ./src
Copying ./src/* would fail when src exists, but is empty or only contains
hidden files.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-03-07 09:59:08 +01:00
Matthias Schiffer
f505fb07f3
include/image.mk: base package-list manifest on unprepared rootfs
With CONFIG_CLEAN_IPKG, the prepared rootfs does not have a full opkg
status file.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-03-07 09:59:08 +01:00
Matthias Schiffer
a02a69d5f8
imagebuilder: remove split patch dirs from imagebuilder archive
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-03-07 09:59:08 +01:00
Matthias Schiffer
2fbf669730
imagebuilder: reuse rootfs preparation from rootfs.mk
In addition to removing redundant code, this fixes various issues in
IB-generated images that have been fixed in prepare_rootfs before,
including better handling of CONFIG_CLEAN_IPKG and enabling of initscripts
from FILES.

We also reuse the opkg macro and remove --force-... flags that have been
removed from rootfs.mk as well.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-03-07 09:59:08 +01:00
Matthias Schiffer
cf1c7c0f17
include/rootfs.mk: pass additional files dir to prepare_rootfs as an argument
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-03-07 09:59:07 +01:00
Matthias Schiffer
6ab50bb10d
include/rootfs.mk: retain list of conffiles with CONFIG_CLEAN_IPKG
/usr/lib/opkg/status must not be removed completely, otherwise the
packages' conffile lists will be missing. Replace it with a reduced version
only containing the conffile entries.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-03-07 09:58:50 +01:00
Matthias Schiffer
d2daaf8f40
include/rootfs.mk: do not remove opkg prerm scripts during rootfs preparation
When a user removes a preinstalled opkg package, the package's prerm script
(and in particular our default_prerm) should run.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-03-07 08:49:45 +01:00