KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
23076 commits 3 branches 0 tags 154 MiB
Commit graph

56 commits

Author SHA1 Message Date
Jonas Gorski
8411e5c06e bcm63xx: switch to b53 and swconfig 
Switch to using the B53 switch driver where appropriate.

Use a non-tagged default config where it isn't confirmed to be
working.

Remove the switch configuration in preinit as the switch will now
be configured by the driver  to use port isolation to prevent leakage
between lan and wan.

While at it, also provide a switch config for Neufbox 6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35307
 2013-01-23 10:12:40 +00:00
Hauke Mehrtens
d8f1fa1e38 switch: ROBO Switch Gigabit MII Support 
I wrote this patch some time ago because I had a need for one of the
Gigabit ports (Linksys E3000) to be forced to 100FD.  This is based
on the robocfg sources included w/ the RT-N16 sources from ASUS.
Since work is progressing on a BGMAC driver that could be included in
OpenWRT, this may be useful to someone else.

In testing, forcing the speed to 10/100 or 1000 worked fine; however,
when trying to force full-duplex mode, the result was always
half-duplex.  I was not able to isolate the source of the problem
(this patch, driver or H/W limitation).  The only way I could get it
to work was to set the port to Auto, but then only advertise 100FD
(not included in this patch).

I have a modified version of the robocfg package as well, I'd have to
clean it up a little first (remove the full-duplex hack) before
submitting it if there is interest.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34992
 2013-01-03 01:58:01 +00:00
Hauke Mehrtens
63ec34612c switch: improve error messages 
This is in part based on a patch send by Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 34991
 2013-01-03 01:57:19 +00:00
Hauke Mehrtens
25afeba608 brcm47xx: add a new version of the nvram rewrite patch 
This is the version like it was send for mainline inclusion.

SVN-Revision: 34988
 2013-01-03 01:53:30 +00:00
Hauke Mehrtens
da94d4ac29 switch: warn if ndo_do_ioctl is not implemented in the Ethernet driver 
SVN-Revision: 33506
 2012-09-22 12:29:23 +00:00
Hauke Mehrtens
bf0974e8da switch: improve error message 
SVN-Revision: 33464
 2012-09-19 10:57:38 +00:00
Hauke Mehrtens
40f139b53b switch: clean up robo switch driver 
* remove use_et, all supported drivers are using mii ioctls
 * remove robo.phy_addr, phy_addr was always set to ROBO_PHY_ADDR.
 * remove support for old kernel versions
 * do_ioctl is allways called with buff == NULL
 * use if_mii

SVN-Revision: 33002
 2012-08-05 13:10:43 +00:00
Hauke Mehrtens
0758996824 brcm47xx: use libgpio instaed of implementing the gpio interface ourself. 
SVN-Revision: 32992
 2012-08-04 19:46:25 +00:00
Jo-Philipp Wich
654f9c879f switch: the hardware must be up while configuring Since the removal of the interface coldplug hack the timing changed in such a way that eth0 is not up during switch setup, leading to an inaccesible device. Bring up the switch interface before configuring it to mitigate the problem. 
SVN-Revision: 30937
 2012-03-13 21:15:41 +00:00
Hauke Mehrtens
b9da4dcb6b switch: fix some memory leaks in switch_parse_vlan() 
SVN-Revision: 29936
 2012-01-28 13:52:37 +00:00
Hauke Mehrtens
b220442c75 switch: update for brcm47xx target 
* remove suport for 2.4 kernel
* add support for bcma bus

SVN-Revision: 27904
 2011-08-04 20:07:58 +00:00
Florian Fainelli
640927dde3 switch: fix switch-robo device reference counting 
Fix incorrect device reference counting by switch-robo.

Signed-off-by: George Kashperko <george@znau.edu.ua>

SVN-Revision: 25619
 2011-02-20 17:24:15 +00:00
Florian Fainelli
e31542241c remove whitespaces in kmod-switch sources 
SVN-Revision: 22320
 2010-07-20 22:25:04 +00:00
Claudio Mignanti
2d86ea7bf3 massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950 
SVN-Revision: 22145
 2010-07-12 14:06:13 +00:00
Felix Fietkau
543d870e82 remove linux 2.4 support from several packages 
SVN-Revision: 21954
 2010-06-26 20:43:41 +00:00
Jo-Philipp Wich
501e154d03 switch: explicitely clear port mappings in unsused vlans (#7082) 
SVN-Revision: 20717
 2010-04-05 13:51:26 +00:00
Nicolas Thill
2d100861a4 switch: suppress boot error message on 2.4 
SVN-Revision: 19922
 2010-03-01 01:12:57 +00:00
Jo-Philipp Wich
96e4312e7e switch: eliminate the asterisk from the switch port configuration and set it automatically on the first vlan, this aligns the broadcom vlan config with the swconfig format 
SVN-Revision: 19909
 2010-02-28 16:40:06 +00:00
Florian Fainelli
f4edda27af switch: do not include linux/autoconf.h (#6513) 
SVN-Revision: 19903
 2010-02-28 12:57:57 +00:00
Jo-Philipp Wich
194f32bc26 change switch config to swconfig style format to remain consistent accross platforms 
SVN-Revision: 18425
 2009-11-15 18:43:46 +00:00
Florian Fainelli
5a13cc0726 fix breakage on wl500gp after r18214, thanks sn9 (#6084) 
SVN-Revision: 18289
 2009-11-03 20:35:37 +00:00
John Crispin
2d57b56bce make etehrent work on wrt350n, thx sn9 
SVN-Revision: 18214
 2009-10-29 21:26:36 +00:00
Hauke Mehrtens
8673372e20 add patches for kernel 2.6.31 
This is completly untested. Only a compile tests with the default config was done!

SVN-Revision: 17734
 2009-09-26 11:48:48 +00:00
Florian Fainelli
369db35a29 fix oops in switch-robo on brcm63xx, thanks to Daniel Dickinson (#5053) 
SVN-Revision: 15611
 2009-05-05 06:32:45 +00:00
Florian Fainelli
9051239daf prevent kmod-switch from accessing nvram on brcm63xx (#5035) 
SVN-Revision: 15555
 2009-05-02 10:01:09 +00:00
Florian Fainelli
210254c279 fix nvram_get checking on non-WGT634U (#4975) 
SVN-Revision: 15319
 2009-04-21 09:25:51 +00:00
Florian Fainelli
6f80c9cc7c fix strange LED behavior with Netgear WGT634U (#3552) 
SVN-Revision: 15290
 2009-04-20 10:27:46 +00:00
Felix Fietkau
34939cad39 get rid of $Id$ - it has never helped us and it has broken too many patches ;) 
SVN-Revision: 15242
 2009-04-17 14:09:46 +00:00
Florian Fainelli
04909ca614 allow kmod-switch to be used on brcm63xx (#4599) 
SVN-Revision: 14825
 2009-03-09 21:57:11 +00:00
Felix Fietkau
529e87f6c5 switch: remove message about BFL_ENETADM not being set on systems with a roboswitch 
SVN-Revision: 13100
 2008-11-02 23:14:16 +00:00
Felix Fietkau
40990382e5 (4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registered 
This patch prevents switch-robo.c from attempting robo_probe on a port
that is already registered.  robo_probe will adjust kernel reference counts
if it detects a switch on the port.  If this patch wasn't applied, the
wrt350n would hang on reboot, waiting for the network driver reference count
to reach zero indefinitely.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11469
 2008-06-15 11:10:27 +00:00
Peter Denison
f027ecb2cf Stopgap compilation fixes for diag and switch under 2.6.25 
SVN-Revision: 11231
 2008-05-20 22:33:45 +00:00
Peter Denison
72d40dec08 Allow package/switch to compile against 2.6.25 
SVN-Revision: 11138
 2008-05-14 15:03:05 +00:00
Michael Büsch
6a2a1e251b Check the return values of kmalloc() 
SVN-Revision: 10599
 2008-03-13 15:22:46 +00:00
Felix Fietkau
d65241e13b fix switch-robo.c compile errors on linux 2.4 
SVN-Revision: 10539
 2008-03-01 15:34:17 +00:00
Michael Büsch
a9cddc69ec Fix the roboswitch code for the WRT350N 
SVN-Revision: 10531
 2008-02-27 22:35:41 +00:00
Michael Büsch
faa14263f5 ssb: Make the GPIO API reentrancy safe. 
SVN-Revision: 10496
 2008-02-19 15:22:17 +00:00
Felix Fietkau
d9e54d1e0b export switch-core.h to $(STAGING_DIR) 
SVN-Revision: 10138
 2008-01-06 19:28:26 +00:00
Felix Fietkau
e3ecefbd23 fix adm switch misdetection, which led to bogus button events that caused the system to shut down 
SVN-Revision: 9555
 2007-11-16 03:11:09 +00:00
Felix Fietkau
a9d683ca91 major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets 
SVN-Revision: 8694
 2007-09-08 19:55:42 +00:00
Nicolas Thill
e3dc76af1b fix board name for nvram and switch packages on brcm-2.4 after [8653] 
SVN-Revision: 8664
 2007-09-07 12:54:24 +00:00
Nicolas Thill
34bb4638e7 move package description to a separate definition, remove it when DESCRIPTION=TITLE 
SVN-Revision: 8659
 2007-09-07 08:34:51 +00:00
Felix Fietkau
56231056ea strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles. 
SVN-Revision: 8653
 2007-09-06 16:27:37 +00:00
Nicolas Thill
be0de75a3e package Makefile cleanup: remove uneeded vars 
SVN-Revision: 8587
 2007-09-03 08:20:36 +00:00
Nicolas Thill
02cd6d278f use a default VERSION field for kmod packages 
SVN-Revision: 8575
 2007-09-02 16:39:27 +00:00
Felix Fietkau
80840457a5 fix kmod-switch compile on brcm-2.4 (#1461) 
SVN-Revision: 6565
 2007-03-14 13:42:21 +00:00
Felix Fietkau
dcfbd5f656 fix up remaining parts for the brcm47xx-2.6 port (tested on wgt634u), nuke the old brcm-2.6 port, close #1312, #1451 
SVN-Revision: 6564
 2007-03-14 03:37:40 +00:00
Felix Fietkau
bf622ab0ae add diag and switch support for brcm47xx-2.6 
SVN-Revision: 6562
 2007-03-14 01:19:24 +00:00
Felix Fietkau
c606df6563 cleanup, nuke obsolete 'Kernel drivers' category, convert remaining kmod packages to KernelPackage interface 
SVN-Revision: 6136
 2007-01-20 02:01:53 +00:00
Felix Fietkau
dd03b56357 fix memory leak in switch drivers (patch from #1132) 
SVN-Revision: 6011
 2007-01-07 14:59:43 +00:00