Commit graph

14828 commits

Author SHA1 Message Date
John Crispin
ec9ffe892f oxnas: remove obsolete __cpuinit
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 47214
2015-10-19 10:09:07 +00:00
John Crispin
e1d585d99f lantiq: Synchronize access to the DSL command pipe
Whenever two processes were executing different commands at the same
time then one of the commands sometimes got the response of the other
command.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47213
2015-10-19 10:08:56 +00:00
John Crispin
b7e4c8d3bf lantiq: Print the status register whenever an error occurs
This should help finding potential problems with the SPI driver.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47209
2015-10-19 10:08:29 +00:00
John Crispin
2c7d536780 lantiq: Fixed reading the number of RX FIFOs in the SPI driver
Until now the SPI driver used the TX bits for the RX FIFO. This seems
uncritical for now since both are equals on my devices (VR9), but this
could cause problems on other SoCs.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47208
2015-10-19 10:08:18 +00:00
John Crispin
42c9a85e8e Revert "lantiq: activate spi-xway on TDW89X0"
This reverts commit 68c2e4789b4f071ee75d39248f4d08fe8283eb28.

commit r47159 was bad

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47207
2015-10-19 10:08:12 +00:00
John Crispin
7295e9fb8b ramips: add alsa support
add the SDK alsa driver. this has only been tested on mt7628/88 and wm8960.
mt7620 is only compile tested.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47205
2015-10-19 10:07:54 +00:00
John Crispin
f5d5cb0114 ramips: add a baurate hack
When talking to an atmel controller we need 9600 or 250000 baud.
as 250000 does not exist we use 2500000.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47204
2015-10-19 10:07:43 +00:00
John Crispin
51dd991d39 ramips: add LinkIt Smart7688 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47203
2015-10-19 10:07:38 +00:00
Hauke Mehrtens
a90135949f brcm47xx: remove support for kernel 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47199
2015-10-17 11:50:16 +00:00
Hauke Mehrtens
99a468a9dd bcm53xx: remove support for kernel 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47198
2015-10-17 11:49:01 +00:00
Hauke Mehrtens
b5842aed82 kernel: generic: add kernel 4.3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47182
2015-10-11 19:08:08 +00:00
John Crispin
f457ae99f2 lantiq: fix use of IRQF_DISABLED in lantiq kmods
The IRQF_DISABLED flag was removed in kernel 4.1 with commit
"genirq: Remove the deprecated 'IRQF_DISABLED' request_irq() flag entirely" [1].

Therefore the compilation of ltq-hcd and ltq-vmmc kmods fails.

[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=d8bf368d0631d4bc2612d8bf2e4e8e74e620d0cc

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47180
2015-10-11 16:24:43 +00:00
John Crispin
c9ef7a49c7 ar71xx: TP-LINK Archer C5 image name
There are more version on market, add version number to the name.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 47179
2015-10-11 16:24:31 +00:00
John Crispin
d6ac3faec3 ar71xx/image: migrate all images based on macro TPLINK
Includes images for
rnx-n360rt
tl-mr3220-v1
tl-mr3420-v1
tl-wa701n-v1
tl-wa730rev1
tl-wa7510n
tl-wa801nd-v1
tl-wa830re-v1
tl-wa901nd-v1
tl-wa901nd-v2
tl-wr740n-v1
tl-wr740n-v3
tl-wr743nd-v1
tl-wr841nd-v3
tl-wr841nd-v5
tl-wr841nd-v7
tl-wr842n-v1
tl-wr941nd-v2
tl-wr941nd-v3
tl-wr941nd-v4
tl-wr1043nd-v1

SVN-Revision: 47178
2015-10-11 16:24:22 +00:00
John Crispin
abe9f6b025 ar71xx/image: remove old build step TPLINK-LZMA
all boards has been migrated to the new build step

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 47177
2015-10-11 16:24:10 +00:00
John Crispin
b2e3f71b7c ar71xx/image: migrate last TPLINK-LZMA images to new build system
Migrate TLWR1043V2 TLWR2543

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 47176
2015-10-11 16:24:01 +00:00
John Crispin
16517293ac ar71xx/image: refactor tplink-chn-v2 devices
* use build step mktplinkfw with extra arguments
* remove now unused mktplinkfw-chn-v2
* use Device/tplink

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 47175
2015-10-11 16:23:53 +00:00
John Crispin
5816fa9a98 ar71xx/image: add options argument to mktplinkfw step
Allow to pass extra arguments to mktplinkfw step. Some board requires
an extra argument to create a valid image.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 47174
2015-10-11 16:23:44 +00:00
John Crispin
6f59ea0e80 ar71xx/image: remove unused multiprofile definitons
These profiles covered by new image/Makefile descriptions. Only the old format uses
MultiProfile macro

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 47173
2015-10-11 16:23:35 +00:00
John Crispin
2fc473cf3f lantiq: bugfix wrong non pre-emptive crc errors output
This patch fixes a wrong non pre-emptive crc errors output of
dsl_control.sh status.

Signed-off-by: Luca Debernardi <luca.debernardi@gmail.com>

SVN-Revision: 47172
2015-10-11 16:23:26 +00:00
John Crispin
4412334bea brcm2708: use mmd for overlays subdirectory
Fixes https://dev.openwrt.org/ticket/20704

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47171
2015-10-11 16:23:18 +00:00
John Crispin
0be23c40f3 brcm2708: all sound overlays require i2c to work
Tested on RPi B+ with HiFiBerry Amp+

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47169
2015-10-11 16:23:01 +00:00
Luka Perkov
9c7336e0f9 imx6: fix platform checking
Fix platform checking when configuring networks and when doing sysupgrade.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 47168
2015-10-10 12:35:02 +00:00
Michael Büsch
56ee706379 omap24xx: Append dtb to the zImage
We just hardcode the n810 dtb for now. It should be selectable via profiles.

SVN-Revision: 47166
2015-10-09 07:46:12 +00:00
Imre Kaloz
8bb23cfb66 mvebu: add support for the Linksys WRT1900ACS (Shelby)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 47164
2015-10-08 10:01:30 +00:00
John Crispin
02197db96f lantiq: activate spi-xway on TDW89X0
use the hardware spi core in favour of spi-gpio.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47159
2015-10-07 12:12:48 +00:00
John Crispin
33f9165a63 lantiq: spi driver fix
adds a missing wait busy. based on the UGW patch 2060..

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47158
2015-10-07 12:12:35 +00:00
Michael Büsch
f0b83fd20f omap24xx: Add missing kconfig options
SVN-Revision: 47155
2015-10-07 09:40:42 +00:00
Michael Büsch
d5e9530692 omap24xx: KERNEL_PATCHVER:=4.1
SVN-Revision: 47154
2015-10-07 08:30:58 +00:00
Michael Büsch
5112dbca9a omap24xx: Remove 4.0
SVN-Revision: 47153
2015-10-07 08:29:06 +00:00
John Crispin
2210e821e1 lantiq: bugfix luci lantiq_dsl status
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Signed-off-by: Helge Mader <hmader@tdt.de>
Reported-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47152
2015-10-07 08:00:54 +00:00
John Crispin
b0f7e6bc83 ramips: fix /target/linux/ramips/dts/HC5XXX.dtsi
dtb complained about those lines

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47151
2015-10-07 08:00:40 +00:00
Felix Fietkau
2686dc6dd8 ramips: enable mt76 by default for the mt7620 subtarget (for devices with mt7620 + mt7612)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47146
2015-10-06 12:32:31 +00:00
Felix Fietkau
38389c79c2 ramips: improve read performance of the m25p80 chunked io patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47137
2015-10-05 11:34:16 +00:00
John Crispin
a0543c2bdc lantiq: several ARV7519RW22 fixes
Fixes ARV7519RW22 flash register (only 1 flash).
Power LED is green, not red.
Rename message LEDs to internet.
Add LEDs configuration (lan, wan, power).
Enable switch VLANs.
Fix secondary USB.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 47132
2015-10-05 10:28:34 +00:00
John Crispin
2795592d91 lantiq: make v4.1 the default kernel
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47131
2015-10-05 10:28:26 +00:00
John Crispin
161179f40b lantiq: Add target TP-Link TD-W8980
The device is similar to the TD-W8970, beside a different Atheros 2.4 GHz
wireless chip and the additional, PCI connected, WAVE300 5 GHz wireless.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47130
2015-10-05 10:28:19 +00:00
John Crispin
f2f50ad762 lantiq: fix ath_pci_fixup hang on bridged devices
Port of r41856.

In contrast to the brcm63xx target, it isn't sufficient to enable/disable
the bridge. The device needs to be enabled/disabled to fix the hang. The
bridge will be automatically enabled by the time the connected device is
enabled.

Fixes boot on TD-W8980.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47129
2015-10-05 10:28:12 +00:00
John Crispin
c5cc3d9610 lantiq: Change the data-type of mac address in ETOP driver
This adds the changes from r46219 to the linux 4.1 patches as well.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47128
2015-10-05 10:28:07 +00:00
John Crispin
cea7c66ef8 lantiq: bugfix uninitialized variables
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
Reported-by: Sylwester Petela <sscapi@gmail.com>

SVN-Revision: 47127
2015-10-05 10:27:55 +00:00
John Crispin
7ce3e1fd3c brcm2708: keep boot partition mounted to allow users to change config.txt
This way it's easier to configure device tree overlays, customize other
parameters...

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47126
2015-10-05 10:27:49 +00:00
John Crispin
d1fc19265a brcm2708: add support for device tree overlays
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47125
2015-10-05 10:27:41 +00:00
John Crispin
b97498ab29 brcm2708: switch device tree compilation to linux
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47124
2015-10-05 10:27:34 +00:00
John Crispin
a32acfe73c brcm2708: fix kmod-sound-soc-bcm2708-i2s config
Right now, selecting kmod-sound-soc-bcm2708-i2s causes build errors due to
missing configs.
kmod-regmap enables I2C and SPI, causing build errors due to depending
variables not defined.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47123
2015-10-05 10:27:18 +00:00
John Crispin
b4db6d29d3 ramips: improve systick timer
when sleep mode is disable use MIPS as clocksource and clockevent instead of systick.
because MIPS timer has higher resolution 5ns less than systick 20us and
larger counter bits 32 > 16.
clean interrupt by write compare register at isr.
fix typo cause sleep mode not enable.

Signed-off-by: Michael Lee <igvtee@gmail.com>

SVN-Revision: 47122
2015-10-05 10:27:09 +00:00
John Crispin
10f75a2b7f ramips: fix use remove_irq to release irqaction resource
Signed-off-by: Michael Lee <igvtee@gmail.com>

SVN-Revision: 47121
2015-10-05 10:27:04 +00:00
John Crispin
ccf89e71f2 ramips: add support for 16MB VoCore
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47120
2015-10-05 10:27:00 +00:00
John Crispin
948e67cb16 ramips: fix size-cells for spi nodes
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47119
2015-10-05 10:26:54 +00:00
John Crispin
d4cd8f89eb ramips: Ralink RT3883 RGMII pinmux fix.
Due to datasheet of rt3883 SoC rgmii1 port handles pins 84-95 and rgmii2 port handles pins 72-83. When this function ports gets added to rt3883_pinmux_data there's wrong pinmux bits set (RT3883_GPIO_MODE_GE1 manages 84-95 pins and RT3883_GPIO_MODE_GE2 manages 72-83). So when enabling rgmii2 as GPIO driver confuses hardware and nothing work, neither rgmii nor gpio.
Also in '0030-pinctrl-ralink-add-pinctrl-driver.patch' typo in name of rgmii2 port.

Signed-off-by: Nick Leiten <nickleiten@gmail.com>

SVN-Revision: 47118
2015-10-05 10:26:40 +00:00
John Crispin
aecac14cc4 ramips: Enable rx of 1536 bytes ethernet frames on MT7621
The default switch frame size (with FCS + header) is 1536 bytes. But the
GMAC only accepted frames up to 1522 bytes. Setting it to 1536 allows to
receive ethernet frames using the full of MTU 1500 + an extra VLAN header +
VLAN header added by the switch.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 47117
2015-10-05 10:26:34 +00:00