Commit graph

31769 commits

Author SHA1 Message Date
Jonas Gorski
e9650d4557 netfilter.mk: fix redirect module locations for 3.19+
ntf_redir_ipvX is part of NAT support, so they should be in the
appropriate nft-nat kmods. Since they depend on nf_nat_redirect,
nf_nat_redirect should be part of nf-nat, not ipt-nat.

Fixes nft-core gaining a missing dependency on nf_nat_redirect.ko.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46109
2015-06-22 12:27:25 +00:00
Steven Barth
1877bc9d8f gcc/musl: rework SSP-support
Make musl provide libssp_nonshared.a and make GCC link it unconditionally
if musl is used. This should be a no-op if SSP is disabled and seems to be
the only reliable way of dealing with SSP over all packages due to the mess
that is linkerflags handling in packages.

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46108
2015-06-22 10:31:07 +00:00
Rafał Miłecki
e0a3d9d115 otrx: add extra compilation check before using __BYTE_ORDER
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46106
2015-06-22 07:51:00 +00:00
Rafał Miłecki
0e5c445df6 otrx: include endian.h to make __BYTE_ORDER work with musl
Without this the condition
if __BYTE_ORDER == __BIG_ENDIAN
was always true.

Thanks Szabolcs.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46105
2015-06-22 06:45:56 +00:00
Rafał Miłecki
5c809ecfe7 b53: Allow using all 8 ports on BCM53011
On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000
(BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port
5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and
usually 3 of them are connected to the SoC.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46104
2015-06-21 21:06:09 +00:00
Felix Fietkau
20b3f6683d ath9k: fix ar956x device detection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46090
2015-06-21 17:52:12 +00:00
Felix Fietkau
3a237d638e toolchain: mark gcc 4.9 as broken, it miscompiles some code especially on ARM
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46089
2015-06-21 17:52:00 +00:00
Rafał Miłecki
b0cdcf4e93 bcm53xx: respect ACTIVE_LOW when powering USB using GPIO
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46088
2015-06-21 16:47:05 +00:00
Rafał Miłecki
90d425039b bcm53xx: enable USB power on Buffalo WZR-1750DHP
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46087
2015-06-21 16:26:23 +00:00
Rafał Miłecki
0049d0ca75 bcm53xx: update SPROM driver to include just-sent patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46086
2015-06-21 14:26:03 +00:00
Rafał Miłecki
3cb077111a ramips: refresh patch with USB_MT7621_XHCI_PLATFORM
Fixes: edea6dfde4dc ("kernel: make USB_XHCI_PLATFORM selectable")
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46085
2015-06-21 14:02:13 +00:00
Rafał Miłecki
1909a42ad4 mac80211: backport some brcmfmac patches
There are two important patches in this patchset: updating read pointer
quicker & rework of .get_station().
There are few more upstream patches that are p2p-related and weren't
backported in this commit.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46084
2015-06-21 12:07:33 +00:00
Rafał Miłecki
167a2dc12e bcm53xx: enable USB power on Netgear R6250
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46083
2015-06-21 11:09:49 +00:00
Rafał Miłecki
64d3e52ad0 bcm53xx: update xHCI patch
This drops some debugging pr_info and adds platform_device_unregister.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46082
2015-06-21 11:09:30 +00:00
Rafał Miłecki
63bc66cfcd bcm53xx: fix enabling GPIO-controlled USB power
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46081
2015-06-21 10:18:52 +00:00
Rafał Miłecki
b3afbe4918 bcm53xx: add xHCI support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46080
2015-06-21 10:18:43 +00:00
Rafał Miłecki
51042bc517 kernel: make USB_XHCI_PLATFORM selectable
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46079
2015-06-21 10:18:24 +00:00
Rafał Miłecki
1e6643ff15 otrx: optimize memory usage by function checking TRX CRC
Allocating huge buffer for the whole TRX wasn't too optimal.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46078
2015-06-20 21:12:01 +00:00
Rafał Miłecki
c13dede6b1 otrx: make crc32 table global for further optimizations
So far we got only one generic function accessing this table, but
implementing optimizations will require calculating crc32 in other code
parts as well.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46077
2015-06-20 21:11:56 +00:00
Steven Barth
933b588e25 uclibc++: link against libssp_nonshared instead of libssp
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46076
2015-06-20 18:36:52 +00:00
Steven Barth
eb73f4aed7 musl: update musl to 2015-06-20
Fixes a mips-regression and a missing SSP function

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46075
2015-06-20 18:36:50 +00:00
Steven Barth
34aeffef08 libpcap: fixup libtool
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46074
2015-06-20 17:37:28 +00:00
Steven Barth
b954c61d96 musl: apply hardening options (e.g. SSP) also to libc itself
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46073
2015-06-20 17:37:25 +00:00
Steven Barth
565a2940ff package-defaults: remove libssp for musl (redundant)
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46072
2015-06-20 17:37:22 +00:00
Steven Barth
cfdadd3e1d gcc: musl comes with its own SSP, so use it instead of libssp
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46071
2015-06-20 17:37:20 +00:00
Steven Barth
fc5f02410f buildroot: move hardening options into separate file
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46070
2015-06-20 17:37:18 +00:00
Felix Fietkau
7b4d039e00 musl: read the timezone from /etc/TZ
Currently the OpenWRT boot scripts write the timezone configuration to
/tmp/TZ, relying on the behaviour of uClibc that the timezone is read
from /etc/TZ if no TZ env variable is found.

This works because /etc/TZ is a symlink to /tmp/TZ.

Musl libc however only reads the timezone from the TZ env variable and
if it doesn't find it or it's empty, it will look for a zoneinfo
file, that doesn't exist.

So in musl builds no timezone is ever set.

This patch fixes the issue by having musl libc behave like uClibc: if no
TZ env variable is found it will try to load it from /etc/TZ.

Signed-off-by: Gianluca Anzolin <gianluca at sottospazio.it>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46069
2015-06-19 17:48:11 +00:00
Steven Barth
23633249c8 ppp: honor LDFLAGS
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46068
2015-06-19 17:07:11 +00:00
Steven Barth
8a9fd81e55 uclibc++: only disable SSP for ppc
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46067
2015-06-19 14:36:37 +00:00
Steven Barth
38da12f7e4 uclibc++: honor ldflags, disable SSP
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46066
2015-06-19 14:09:02 +00:00
Steven Barth
4d548dce67 libtool: enable passthrough for SSP options
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46065
2015-06-19 13:45:48 +00:00
Steven Barth
539d02eb0b iproute2: honor LDFLAGS
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46064
2015-06-19 13:30:18 +00:00
Jonas Gorski
0f5b1a3eca kernel: update 4.0 to 4.0.5
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.5

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46063
2015-06-19 11:12:43 +00:00
Imre Kaloz
631e98977b mwlwifi: upgrade to 10.3.0.3
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46061
2015-06-19 08:35:11 +00:00
John Crispin
2238b75285 ralink: add support for mt7621 switch counters
Signed-off-by: Cristian Morales Vega <cristian@samknows.com>

SVN-Revision: 46050
2015-06-18 18:21:52 +00:00
John Crispin
710a17e16d ar71xx: add profile and build image for EnGenius EPG5000.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>

SVN-Revision: 46049
2015-06-18 18:21:46 +00:00
John Crispin
1f038e0678 ar71xx: add user-space support for EnGenius EPG5000.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>

SVN-Revision: 46048
2015-06-18 18:21:41 +00:00
John Crispin
be755a99d6 ar71xx: add kernel support for EnGenius EPG5000.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>

SVN-Revision: 46047
2015-06-18 18:21:33 +00:00
John Crispin
e85f3471ba ar71xx: add support for TL-WR720N-v4.
The hardware should be almost the same as TL-WR720N-v3.  WiFi and LAN networks
were tested by "Lo Yuk Fai <loyukfai@gmail.com>".  Failsafe and slider switch
were tested by "Wong min <alpha080@gmail.com>".

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 46046
2015-06-18 18:21:23 +00:00
John Crispin
8399be545a ar71xx: add support for compex wpj531
tftpboot 0x80500000 openwrt-ar71xx-generic-wpj531-16M-squashfs-sysupgrade.bin
erase 0x9f030000 +$filesize
erase 0x9f680000 +1
cp.b $fileaddr 0x9f030000 $filesize

Signed-off-by: Christian Mehlis <christian@m3hlis.de>

SVN-Revision: 46045
2015-06-18 18:21:15 +00:00
John Crispin
694dd581eb ar71xx: Add Support for the Bitmain Antminer S1
This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner

http://wiki.openwrt.org/toh/bitmain/s1

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: James Hilliard <james.hilliard1@gmail.com>

SVN-Revision: 46044
2015-06-18 18:21:05 +00:00
John Crispin
cf1fb25e67 ramips: Add Support for the Linksys RE6500
This patch adds support for the Linksys RE6500 Range Extender

http://wiki.openwrt.org/toh/linksys/re6500

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 46043
2015-06-18 18:20:56 +00:00
John Crispin
e26ba31f76 ramips: Add support for the D-Link DCS-930 B1
http://wiki.openwrt.org/toh/d-link/dcs-930l

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 46042
2015-06-18 18:20:46 +00:00
John Crispin
640b211b1e ramips: add support for PandoraBox PBR-M1
This patch is for PandoraBox PBR-M1 which is based on mt7621,
all the features work fine, including rtc, leds, button, usb3.0, etc.

Signed-off-by: tymon <banglang.huang@foxmail.com>

SVN-Revision: 46041
2015-06-18 18:20:40 +00:00
John Crispin
df1daa4692 ubus: update to latest git HEAD
this adds ACL support

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46040
2015-06-18 17:04:14 +00:00
John Crispin
765efbf10e ramips: fix a bug in the cevt code on mt7620
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46038
2015-06-18 11:57:07 +00:00
Steven Barth
3cb3da9556 linux-atm: add PKG_FIXUP
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46037
2015-06-18 11:10:46 +00:00
Steven Barth
feeea1cd28 lua: honor LDFLAGS
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46036
2015-06-18 10:55:57 +00:00
Steven Barth
ca96d1ab3f package.mk: replicate SSP and relro in both CFLAGS and LDFLAGS
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46035
2015-06-18 10:48:28 +00:00
Steven Barth
2fb09857e1 uclibc: unbreak after enabling SSP
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46034
2015-06-18 09:49:45 +00:00