KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
19708 commits 3 branches 0 tags 154 MiB
Commit graph

7847 commits

Author SHA1 Message Date
Vasilis Tsiligiannis
42ec97097e generic: Enable HPET, HID and AT keyboard support 
SVN-Revision: 30309
 2012-02-05 17:56:04 +00:00
Vasilis Tsiligiannis
b5ff8b85d6 generic: Add missing and remove unused config symbols 
SVN-Revision: 30133
 2012-02-04 20:45:17 +00:00
Jonas Gorski
778e5d4fa5 brcm63xx: add support for linux 3.3 
SVN-Revision: 30027
 2012-02-04 10:17:27 +00:00
Jonas Gorski
49874a57f1 kernel: fix netfilter layer7 compilation in 3.3 
SVN-Revision: 30026
 2012-02-04 10:17:14 +00:00
Jonas Gorski
d6afe712ab x86: make alix platform patch apply to 3.3 
Based on a patch from Philip Prindeville.

While at it, also refresh the patches.

SVN-Revision: 30025
 2012-02-03 20:17:00 +00:00
Jo-Philipp Wich
c433bfb571 disable additional PATA drivers in global 3.2 and 3.3 config, remove redundant symbols from alix2 config 
SVN-Revision: 30024
 2012-02-03 19:47:55 +00:00
Jo-Philipp Wich
40867f1b68 x86: trivial -- add missing CONFIG_GEOS symbol to top-level So that builds don't stall in x86 prompting for this symbol. [From Philip Prindeville, via http://patchwork.openwrt.org/patch/1828/] 
SVN-Revision: 30023
 2012-02-03 19:21:41 +00:00
Jo-Philipp Wich
79a3fdb9da geos: backport driver from linux-next to 3.2 and 3.3 The Geos driver is in linux-next and will be out in 3.4. It builds fine against 3.2.2 and 3.3-rc2. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> 
SVN-Revision: 30022
 2012-02-03 18:16:27 +00:00
Jo-Philipp Wich
25d605ab0e net5501: backport drivers from linux-next Backport net5501 platform driver from 3.4. Remove vestiges of old (pre-2.6.30) leds-net5501.c driver. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> 
SVN-Revision: 30021
 2012-02-03 18:14:02 +00:00
Jo-Philipp Wich
7a36f3d2ff x86: move additional oddball PATA drivers These should only be enabled in the generic image, as they bloat all of the other targets. Also add symbols for NET5501, ALIX, and GEOS which were added backported to 3.2 and 3.3. Restore PC speaker to Geos target. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> 
SVN-Revision: 30019
 2012-02-03 18:02:57 +00:00
Jo-Philipp Wich
d13c3cd073 net5501: adjust CFLAGS and package selection (#10893) This patches the CFLAGS for Geode LX CPUs for 4.3 and new GGC versions. This creates more compatible code and allowed me to boot my system first time with no troubles. Also, the missing kmod is added in. 
SVN-Revision: 30013
 2012-02-03 14:19:29 +00:00
Felix Fietkau
d9ff9c44ee ar71xx: add usb on the pb92 board 
SVN-Revision: 30007
 2012-02-03 09:44:51 +00:00
Jonas Gorski
f99bf6517c x86: add 3.3 generic symbols 
Copy x86/config-3.2 to x86/config-3.3 and add additional symbols (for 3.3-rc2).

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 30002
 2012-02-02 21:01:59 +00:00
Jo-Philipp Wich
b6be49429b alix2: backport platform driver updates from linux-next Add patches to x86/patches-3.2 and x86/patches-3.3 (update will appear in 3.4). [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1817/] 
SVN-Revision: 30001
 2012-02-02 19:26:32 +00:00
Jo-Philipp Wich
7a9e4ffe8e alix2, geos, net5501: remove kmod-ledtrig-netfilter, its not used by any standard system facility 
SVN-Revision: 30000
 2012-02-02 19:11:52 +00:00
Jo-Philipp Wich
bf8bb9b661 alix2, goes, net5501: clean up default packages Remove packages which are dependencies of other packages Remove packages which are part of the default package list Remove DSL specific packages from net5501 Remove bridge package, we use the busybox applet Replace hostapd with wpad 
SVN-Revision: 29999
 2012-02-02 19:06:22 +00:00
Jo-Philipp Wich
047ba1e12e alix2, net5501: bump both subtargets to Linux 3.2.2 to align with the rest 
SVN-Revision: 29998
 2012-02-02 19:00:40 +00:00
Jo-Philipp Wich
1ae5715f2e geos: add missing files from previous commit 
SVN-Revision: 29997
 2012-02-02 18:59:51 +00:00
Jo-Philipp Wich
a1258ccaba geos: backport Geos driver from linux-next Backport of linux-next driver. Driver adds support for LEDS and S/W button. Add hotplug script for button actions. Add Openwrt system config for LEDS triggers. Add updated kernel .config for 3.2 symbols. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1816/] 
SVN-Revision: 29996
 2012-02-02 18:58:20 +00:00
Jo-Philipp Wich
415a375eaa geos: cleanup GPIO driver name In 3.1, the old drivers/char/ entry for the CS5535 GPIO driver went obsolete. Make Geos use a recent kernel and remove this ambiguity. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1815/] 
SVN-Revision: 29995
 2012-02-02 18:44:35 +00:00
Jo-Philipp Wich
5523eca4e5 net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] 
SVN-Revision: 29994
 2012-02-02 18:41:10 +00:00
Jonas Gorski
eca9950f63 kernel: add preliminary support for linux 3.3 
Based on 3.3-rc2

SVN-Revision: 29986
 2012-02-02 08:23:54 +00:00
Jo-Philipp Wich
3310df6b52 alix2: correct h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Drop obsolete CS5535 GPIO driver. 
[Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1804/]

SVN-Revision: 29981
 2012-02-01 15:31:23 +00:00
Gabor Juhos
41bd6bd282 ar71xx: fix ethernet LEDs on the WHR-{G301N,HP-G300N,HP-GN} boards 
SVN-Revision: 29978
 2012-01-31 20:49:34 +00:00
Gabor Juhos
c315ce403b ar71xx: merge DIR-600 A1 and DIR-615 E4 support 
SVN-Revision: 29976
 2012-01-31 18:37:29 +00:00
Gabor Juhos
dd47afc197 ar71xx: fix ethernet LEDs on the DIR-600-A1 board 
SVN-Revision: 29975
 2012-01-31 18:37:24 +00:00
Gabor Juhos
8200f0c61a ar71xx: unify LED names on D-Link boards 
SVN-Revision: 29974
 2012-01-31 18:37:15 +00:00
Gabor Juhos
faeca86e50 ar71xx: support for D-LINK DIR-615 rev. E4 
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based
on the existing support for DIR-600 A1, with some changes in the leds
configuration.

It's an updated version of the patch that reliably works on my hw for
about a year (it was built from trunk on Jan 2011). When I decided to
update the firmware and checked for the current support for that device,
I also found previously posted patches by Alexey Loukianov that
mentioned some stability issues. I'm not sure where could be the
difference, the patches are very similar except the wmac led pin number
- I was using 1, and those patches used 17.

[juhosg: add 3.2 support]

Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>

SVN-Revision: 29973
 2012-01-31 18:37:09 +00:00
Gabor Juhos
97e4ddd012 ar71xx: add support for TP-Link TL-MR11U 
Adds support for TL-MR11U, a portable router with very similar
hardware to the TL-WR703N and TL-MR3020, but with an onboard
2000mAh battery.

Tested, working:
All interfaces (Ethernet, 802.11n, USB)
WPS & Reset switches (Power appears to be a hardware slider)
Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled)
Sysupgrade

[juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch
breakage]

Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com>

SVN-Revision: 29972
 2012-01-31 18:37:01 +00:00
Gabor Juhos
8766f32b8c ar71xx: compress kernel binaries in Image/Prepare stage 
The lzma compressed kernel is used by one of the loaders.

SVN-Revision: 29971
 2012-01-31 18:36:54 +00:00
Gabor Juhos
d5d37febb4 ar71xx: use dynamically allocated partitions in wrt160nl_part 
SVN-Revision: 29970
 2012-01-31 18:36:51 +00:00
Gabor Juhos
44ed690cb3 ramips: change vlan_config for the ALFA W502U board 
This change moves the WAN port into a separate VLAN.

SVN-Revision: 29969
 2012-01-31 18:34:10 +00:00
Jonas Gorski
b3568b10c2 kernel: update linux 3.2 to 3.2.2 
SVN-Revision: 29967
 2012-01-31 09:44:00 +00:00
Jonas Gorski
1015fab0d7 kernel: update linux 3.1 to 3.1.10 
SVN-Revision: 29966
 2012-01-31 09:43:57 +00:00
Jonas Gorski
e67f4477bb kernel: update linux 3.0 to 3.0.18 
SVN-Revision: 29965
 2012-01-31 09:43:53 +00:00
Florian Fainelli
882eddbf92 build 96348R images 
SVN-Revision: 29960
 2012-01-30 21:12:32 +00:00
Florian Fainelli
0700644b16 remove support for 2.6.39 
SVN-Revision: 29959
 2012-01-30 21:12:28 +00:00
Florian Fainelli
038fc8eac3 bump to 3.0.17 
SVN-Revision: 29958
 2012-01-30 21:12:25 +00:00
Florian Fainelli
8100658a30 add missing config symbols 
Thanks KanjiMonster

SVN-Revision: 29955
 2012-01-30 10:53:20 +00:00
Florian Fainelli
0501ea063b fix gpiommc build failure with 3.2 
SVN-Revision: 29954
 2012-01-30 10:53:16 +00:00
Jo-Philipp Wich
55b5e15bff create a config-3.2 for upcoming changes, rebase config-default to 2.6.39 
SVN-Revision: 29953
 2012-01-30 02:13:37 +00:00
Florian Fainelli
8c4813b75e add default and Sim.One profiles 
SVN-Revision: 29942
 2012-01-29 15:00:36 +00:00
Florian Fainelli
0bb50678de add 3.2 support 
SVN-Revision: 29941
 2012-01-29 15:00:33 +00:00
Florian Fainelli
e82f06639e add another 3.2 framebuffer symbol 
SVN-Revision: 29940
 2012-01-29 15:00:29 +00:00
Florian Fainelli
ad808cf7e6 add support for 3.2 kernel 
SVN-Revision: 29939
 2012-01-29 15:00:25 +00:00
Florian Fainelli
eeb00634a7 add support for the Atheros AP113 reference board 
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch

SVN-Revision: 29935
 2012-01-28 13:19:49 +00:00
Florian Fainelli
405a0f3905 refresh 3.2 patches 
SVN-Revision: 29934
 2012-01-28 13:19:43 +00:00
Jo-Philipp Wich
cb6f860b8f make sure .config gets copied as file When using scripts/env, .config is most likely a symbolic link pointing to env/.config. Previously the symbolic link got copied as-is into the SDK tarball, leading to a dangling .config symlink on the target system which prevented the SDK from working. 
SVN-Revision: 29927
 2012-01-28 03:30:30 +00:00
Hauke Mehrtens
d1c07b3657 brcm47xx: add fix for cardbus host controller 
These devices have two devices on the bus, the host controller itself and the device.

SVN-Revision: 29923
 2012-01-27 20:10:51 +00:00
Gabor Juhos
b9b768b8d3 ar71xx: use 64k block size for WZR-HP-AG300H 
SVN-Revision: 29917
 2012-01-27 10:42:41 +00:00
Gabor Juhos
ac8116739a ar71xx: fix sysupgrade image building of atheros boards after r29899 
SVN-Revision: 29916
 2012-01-27 07:51:09 +00:00
Gabor Juhos
013fe76b36 ar71xx: create the temporary directory before building initramfs images 
Thanks to Florian for reporting.

SVN-Revision: 29915
 2012-01-26 21:28:34 +00:00
Gabor Juhos
a5538a18d4 ar71xx: create a profile and build images for Compex WPE72 
[juhosg: remove ath9k from the the profile package list, build WPE72
image with the Default profile as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29914
 2012-01-26 17:01:44 +00:00
Gabor Juhos
e1e84badaa ar71xx: add support for Compex WPE72/WPE72NX 
This patch adds support for Compex WPE72 bare board and Compex WPE72NX
Indoor Access Point.

[juhosg: add support to 3.2 as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29912
 2012-01-26 17:01:41 +00:00
Gabor Juhos
1c4f6b4308 generic: add WPE72 ID to myloader.h 
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29911
 2012-01-26 17:01:38 +00:00
Gabor Juhos
b3fdd931d1 ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards 
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.

There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.

Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt

[juhosg: reordered some parts in order to keep things sorted
alphabetically]

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>

SVN-Revision: 29910
 2012-01-26 10:44:23 +00:00
Gabor Juhos
038d4e0d77 ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour 
This patch fixes the board detection of the TL-MR3020.

The LED behaviour has also been modified:
* The WPS LED is the diag LED now.
* A netdev trigger for the LAN LED has been added.

The profile of the TL-MR3020 has been updated because the needed package
"kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev
trigger for the 3G/USB LED.

[juhosg: the board name changes has been removed, and the kernel files
has been changed instead.]

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29905
 2012-01-25 07:44:45 +00:00
Gabor Juhos
c11ac55b29 ar71xx: TL-MR3020: fix GPIO polarity for button and switch 
This patch fixes the GPIO polarity for the button and the sliding
switch. The buttons are not active low. "Pressed" and "Released"
events are wrong without the patch.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29904
 2012-01-25 07:44:43 +00:00
Gabor Juhos
4f3d6c9ae9 ar71xx: use the lzma loader on the Planex boards 
SVN-Revision: 29900
 2012-01-24 20:12:10 +00:00
Gabor Juhos
5fa9768cee ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage 
SVN-Revision: 29899
 2012-01-24 20:12:08 +00:00
Gabor Juhos
095c236694 ar71xx: fix the AP/Router LED definitons on MZK-W300NH 
SVN-Revision: 29897
 2012-01-24 18:40:38 +00:00
Gabor Juhos
23e1b451dc ar71xx: preset WLAN LED config on MZK-W300NH 
SVN-Revision: 29896
 2012-01-24 18:40:36 +00:00
Gabor Juhos
23836d5908 ar71xx: remove hardcoded MTD layout from planex files 
SVN-Revision: 29895
 2012-01-24 18:40:34 +00:00
Gabor Juhos
859c915077 ar71xx: pass mtdlayout to Planex boards via command line 
SVN-Revision: 29894
 2012-01-24 18:40:33 +00:00
Gabor Juhos
6ad9bf8d17 ar71xx: remove an unused header file 
SVN-Revision: 29893
 2012-01-24 18:40:31 +00:00
Gabor Juhos
02e77c6ae1 ramips: generate sysupgrade image for the ALL0256N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29884
 2012-01-24 11:48:48 +00:00
Gabor Juhos
944c8aacdb ramips: add user-space support for ALL0256N 
This adds uci-defaults and sysupgrade support for the ALL0256N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29883
 2012-01-24 11:48:47 +00:00
Gabor Juhos
1932a7205c ramips: add kernel support for ALL0256N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29882
 2012-01-24 11:48:45 +00:00
Gabor Juhos
17bb003891 ar71xx: nuke fs_all variable in image/Makefile 
SVN-Revision: 29880
 2012-01-24 09:47:25 +00:00
Gabor Juhos
1fb88e2541 ar71xx: create interim kernel files in a separate dir 
This reduces the size of the ImageBuilder tarball a lot.

SVN-Revision: 29879
 2012-01-24 09:47:23 +00:00
Gabor Juhos
a43e2f508f ar71xx: prebuild all loaders in Image/Prepare stage 
SVN-Revision: 29878
 2012-01-24 09:47:22 +00:00
Gabor Juhos
faf17f197f ImageBuilder: respect the PROFILE parameter 
Based on a patch from #10766

SVN-Revision: 29877
 2012-01-24 09:47:20 +00:00
Gabor Juhos
9cf1d4e06e ramips: scripts updates 
In this patch:

* rename Argus leds to avoid underscores
* rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235
* remove Belkin F5D8235 v1 status led defined as storage led (it was
  defined as usb led earlier, just in wrong place) - it should have
  router led as in v2
* add Argus, Sparklan and Belkin F5D8235 v2 status leds
* add Belkin F5D8235 v1 and v2 usb leds
* fix Belkin F5D8235 v2 network config generation and mac address axtraction
* fix Sparklan board identification
* add Sparklan usb led (this board doesn't have usb connector by
  default and the led is hidden also but if you are going to solder
  the connector then you'll see the led too)
* add Sparklan network config generation and mac address extraction
* fix empty string test in network script and...
* ...sort case entries by the first board in the list

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29871
 2012-01-23 10:23:32 +00:00
Gabor Juhos
44517a3789 ar71xx: 3.2: fix build errors if PCI is not enabled 
SVN-Revision: 29870
 2012-01-23 08:52:21 +00:00
Gabor Juhos
778db0a13d ar71xx: fix compiler warning if PCI is not enabled 
SVN-Revision: 29869
 2012-01-23 08:52:18 +00:00
Gabor Juhos
af015f956c ar71xx: add initial support for 3.2 
Tested on the following boards:
  ALFA AP96
  TL-MR3220 v1
  TL-WR1043ND v1
  TL-WR2543ND v1
  TL-WR703N v1
  TL-WR741ND v1
  TL-WR741ND v4
  WNDR3700 v1
  WZR-HP-G300NH

SVN-Revision: 29868
 2012-01-22 22:38:19 +00:00
Gabor Juhos
386cbfe45b ar71xx: move arch specific files to files-2.6.39 
SVN-Revision: 29867
 2012-01-22 22:38:11 +00:00
Gabor Juhos
7b7427e52c ar71xx: build ALFA AP96 images with default profile as well 
SVN-Revision: 29866
 2012-01-22 22:33:15 +00:00
Gabor Juhos
dd49cca9d6 generic: 3.2: allow to build myloader mtd parser for ATH79 
SVN-Revision: 29860
 2012-01-22 18:43:39 +00:00
Gabor Juhos
9be1b91644 generic: allow to build myloader mtd parser for 3.2+ 
SVN-Revision: 29858
 2012-01-22 18:36:49 +00:00
Gabor Juhos
809fe38e41 ramips fix f5d8235-v1 diag LED support 
SVN-Revision: 29857
 2012-01-22 18:11:39 +00:00
Gabor Juhos
e7dee3aeed ar71xx: wrt160nl_part: include module.h and fix compiler warnings 
SVN-Revision: 29856
 2012-01-22 17:55:38 +00:00
Gabor Juhos
a7d344565b ar71xx: tplinkpart: include module.h 
SVN-Revision: 29855
 2012-01-22 17:55:36 +00:00
Gabor Juhos
6c2638c5e2 ar71xx: rename vsc7385 spi driver 
SVN-Revision: 29853
 2012-01-22 13:51:57 +00:00
Gabor Juhos
bb16739db9 ar71xx: rename ap81 spi driver 
SVN-Revision: 29852
 2012-01-22 13:51:56 +00:00
Gabor Juhos
5ef8b922fa ar71xx: rename rb4xx spi drivers 
SVN-Revision: 29851
 2012-01-22 13:51:54 +00:00
Gabor Juhos
aad175d5b6 ar71xx: rename the nxp_74hc153 driver 
SVN-Revision: 29850
 2012-01-22 13:51:52 +00:00
Gabor Juhos
ef1c53b7b7 ar71xx: change board id of the UniFi board 
SVN-Revision: 29849
 2012-01-22 13:51:50 +00:00
Gabor Juhos
f90e578903 ar71xx: include linux/module.h in the micrel phy driver 
SVN-Revision: 29848
 2012-01-22 13:51:49 +00:00
Gabor Juhos
e9d8deaaed ramips: add sysled and sysupgrade to wr512-3gn 
Patch from #10035.

SVN-Revision: 29847
 2012-01-22 13:43:23 +00:00
Gabor Juhos
8e662f28fe generic: 3.2: don't disable lockdep for OOT modules 
SVN-Revision: 29846
 2012-01-22 09:57:39 +00:00
Gabor Juhos
4625c9b5a4 generic: rtl8366: add rtl8366_smi_write_reg_noack helper 
After issuing a soft reset on the RT8366{S,RB}
switch, waiting for the last acknowlegement fails
in rtl8366_smi_write_reg. Add a _noack version of
the function and use that for issuing a soft reset.

SVN-Revision: 29844
 2012-01-21 22:44:09 +00:00
Hauke Mehrtens
26d4e1876c brcm47xx: add support for pcie host controller on bcma based SoCs. 
This also adds minimal support for the BCMA43224 pcie wireless card.

SVN-Revision: 29843
 2012-01-21 22:39:20 +00:00
Gabor Juhos
557cf076b4 ramips: sysupgrade for ESR-9753 
This patch add sysupgrade for Engenius ESR-9753

Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29824
 2012-01-20 10:49:26 +00:00
Jonas Gorski
aa8f9171f2 kernel: fix OCF for linux 3.2 
Add skb_frag_page from 3.2 to OCF for 3.1 and earlier and use it.

SVN-Revision: 29818
 2012-01-19 19:51:54 +00:00
Jo-Philipp Wich
fc512193a0 add missing kernel symbols 
SVN-Revision: 29790
 2012-01-19 01:57:22 +00:00
Jo-Philipp Wich
2fc3fe1d09 Make the grub timeout configurable on x86 targets 
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>

SVN-Revision: 29786
 2012-01-19 01:14:45 +00:00
Jo-Philipp Wich
095f7f2da3 x86/config-3.2: add linux-3.2 symbols for x86 
The following symbols are missing for x86, in sorted order.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 29783
 2012-01-19 00:31:39 +00:00
Florian Fainelli
dbfeb5d158 fix thinko in 102-ehci_hcd_ignore_oc patch 
SVN-Revision: 29773
 2012-01-18 07:56:02 +00:00
John Crispin
49eb3fd845 gigaset 76x 
* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 29763
 2012-01-17 12:10:35 +00:00
John Crispin
a2708d11e8 ramips: Rework ramips_eth to not require irqsave locking anymore 
Previously the tx housekeeping was done in a spin_lock_irqsave critical
section which causes irqs to be disabled during that time. Since the
housekeeping is already prepared to be scheduled as a tasklet process
the housekeeping only in softirq context and revise the locking between
the tx path and the housekeeping tasklet by using a normal spin_lock
which in most situations will be a NOP anyway.

This makes sure that interrupts are only disabled for a short time
since in the worst case the housekeeping might have to free up to 256
skbs.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 29762
 2012-01-17 11:23:11 +00:00
Hauke Mehrtens
034cf5643f brcm47xx: add support for kernel 3.2 
SVN-Revision: 29756
 2012-01-15 21:18:34 +00:00
Hauke Mehrtens
c3d134af12 brcm47xx: run kernel_oldconfig 
SVN-Revision: 29755
 2012-01-15 14:53:32 +00:00
Imre Kaloz
f9e41adc80 add support for OMAP4 based boards, starting with the PandaBoard 
SVN-Revision: 29753
 2012-01-14 23:02:56 +00:00
Imre Kaloz
6274648199 fixup arm xz support with recent changes 
SVN-Revision: 29750
 2012-01-14 22:55:04 +00:00
Imre Kaloz
e65195c246 add missing symbols 
SVN-Revision: 29749
 2012-01-14 22:53:28 +00:00
Felix Fietkau
b0479e2ca2 kernel: disable bridge igmp snooping in 3.2 as well 
SVN-Revision: 29747
 2012-01-14 14:57:03 +00:00
Felix Fietkau
66895b7115 kernel: disable bridge igmp snooping by default to avoid multicast issues 
SVN-Revision: 29744
 2012-01-14 13:50:25 +00:00
Jonas Gorski
9eb73ee6b7 kernel: ppc40x: ppc44x: add missing kernel config symbol 
SVN-Revision: 29742
 2012-01-14 12:04:17 +00:00
Hauke Mehrtens
d5bc3a994b brcm47xx: update usb driver 
Add workarround for BCM5357 and BCM4749.

This patch contains the following fixes from George Kashperko:
* separate subroutines for controller initialization workarounds -
   following CodingStyle recommendations;
* __devinit __devexit __devinitconst annotations for CONFIG_HOTPLUG;
* fix leak in ssb_hcd_create_pdev/bcma_hcd_create_pdev - as hci_res being
   kmalloc'ed is never freed anywhere while platform_device_add_resources
   will kmemdup resources right away;
* fix compilation error in ssb_hcd_resume - it will fail as soon as
   CONFIG_PM is selected.

SVN-Revision: 29734
 2012-01-13 20:11:23 +00:00
Jo-Philipp Wich
9d497cb132 rtl8366: fix rtl8366_smi_detect() after r29677 
SVN-Revision: 29732
 2012-01-13 19:17:58 +00:00
Jonas Gorski
3883e71097 brcm63xx: add support for linux 3.2 
SVN-Revision: 29731
 2012-01-13 14:59:50 +00:00
Jonas Gorski
1bc0abb058 kernel: add support for linux 3.2.1 
SVN-Revision: 29730
 2012-01-13 14:55:07 +00:00
Jonas Gorski
f3f1075655 kernel: backport overlayfs v11 to 3.0 and 2.6.39 
Should fix whiteout issues and missing files when using extroot.

SVN-Revision: 29727
 2012-01-13 14:42:53 +00:00
Jonas Gorski
c560444a58 kernel: update linux 3.1 to 3.1.9 
SVN-Revision: 29726
 2012-01-13 14:38:28 +00:00
Jonas Gorski
e49d3e1d5b kernel: update linux 3.0 to 3.0.17 
SVN-Revision: 29725
 2012-01-13 14:10:44 +00:00
Felix Fietkau
e87bb77966 ar8216: use vlan configuration for connecting ports (forced to be untagged) even with vlan_enable=0, but keep them isolated before the switch has been configured this makes enable_vlan=0 practical for vlan passthrough 
SVN-Revision: 29719
 2012-01-12 10:15:11 +00:00
Felix Fietkau
c33e016fa5 ar8216: do not strip vlan tags when running with vlan_enable=0 
SVN-Revision: 29718
 2012-01-12 10:15:08 +00:00
Gabor Juhos
fbf81c8e79 ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c 
SVN-Revision: 29713
 2012-01-11 18:00:50 +00:00
Daniel Dickinson
034b7f0ef5 Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics. 
SVN-Revision: 29712
 2012-01-11 13:47:48 +00:00
Gabor Juhos
67f62cf5cf ar71xx: disable ath79 in order to get rid of Kconfig warnings 
SVN-Revision: 29711
 2012-01-11 09:14:19 +00:00
Gabor Juhos
88d8cdd503 ar71xx: pb44_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

SVN-Revision: 29710
 2012-01-11 09:14:18 +00:00
Gabor Juhos
e1b7995aef ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove 
SVN-Revision: 29709
 2012-01-11 09:14:17 +00:00
Gabor Juhos
67444c7795 ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers 
SVN-Revision: 29708
 2012-01-11 09:14:15 +00:00
Gabor Juhos
0f566a376c ar71xx: ar71xx_spi: add shutdown handler 
This allows to access the flash from a kexec'd kernel.

SVN-Revision: 29707
 2012-01-11 09:14:14 +00:00
Gabor Juhos
09a6e3f662 ar71xx: ar71xx_spi: save and restore regs from probe/remove 
SVN-Revision: 29706
 2012-01-11 09:14:13 +00:00
Gabor Juhos
714a9bd641 ar71xx: ar71xx_wdt: add shutdown handler 
SVN-Revision: 29705
 2012-01-11 09:14:11 +00:00
Gabor Juhos
9727256330 ar71xx: refresh patches 
SVN-Revision: 29683
 2012-01-07 19:36:43 +00:00
Gabor Juhos
4edff7d3ef ar71xx: add a profile and build images for the TL-WR2543N/ND 
SVN-Revision: 29682
 2012-01-07 19:36:42 +00:00
Gabor Juhos
a1dcbc66a6 ar71xx: add initial support for the TL-WR2543N/ND board 
The WLAN LEDs are not working yet.

SVN-Revision: 29680
 2012-01-07 19:36:35 +00:00
Gabor Juhos
a56bdeff9d ar71xx: allow to specify max read size for m25p80 
Reading from the flash chip on the TL-WR2543ND seems buggy.
If the SPI flash driver tries to read too much data in one
SPI transfer, the flash chip returns bogus values. This can
be caused by a buggy flash chip on my board, or it can
be a bug in our SPI driver.

Add a workaround to the m25p80 driver until I find out the
root cause of the problem. The patch allows to specify the
maximum numner of bytes which can be read safely withint
one SPI transfer.

SVN-Revision: 29679
 2012-01-07 19:36:33 +00:00
Gabor Juhos
8b567fb508 generic: add driver for the RTL8367R/M switches 
SVN-Revision: 29678
 2012-01-07 19:36:31 +00:00
Gabor Juhos
87fb92ee03 generic: rtl8366: preparing for RTL8367 support 
* make clock delay configurable
* make read,write commands configurable
* use u16 for member and untag fields

SVN-Revision: 29677
 2012-01-07 19:36:30 +00:00
Gabor Juhos
43196813d7 generic: rtl8366_smi: add timeout message 
SVN-Revision: 29676
 2012-01-07 19:36:25 +00:00
Gabor Juhos
67b2814842 ar71xx: local mac support on the wndr3700 
The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>

SVN-Revision: 29675
 2012-01-07 17:24:44 +00:00
Gabor Juhos
6c74274c8d generic: improve MIPS kexec support 
It is based on patches from the linux-longsoon-community git tree:
http://dev.lemote.com/cgit/linux-loongson-community.git/

Now the kernel can use the command line parameter from kexec-tools.

Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped
before executing the new kernel). Compile tested with lantiq (3.1.4)
and brcm47xx (3.0.12).

SVN-Revision: 29674
 2012-01-07 16:29:16 +00:00
Gabor Juhos
f638c6207b ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards 
SVN-Revision: 29672
 2012-01-06 15:54:59 +00:00
Gabor Juhos
1e848b17ad ar71xx: add support for Redwave RW2458N 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29669
 2012-01-06 07:20:59 +00:00
Gabor Juhos
84cd8a5ee0 ar71xx: fix RB-750 network configuration 
SVN-Revision: 29668
 2012-01-06 07:20:54 +00:00
Gabor Juhos
8eb0b7ab3d ar71xx: fix sections mismatch warnings in the nand drivers 
SVN-Revision: 29667
 2012-01-05 18:08:33 +00:00
Gabor Juhos
232eb83f74 ar71xx: fix LED configuration on the RB-750 
SVN-Revision: 29666
 2012-01-05 18:08:28 +00:00
Gabor Juhos
d65c6fe720 ar71xx: create profile and build image for the ALFA AP96 board 
SVN-Revision: 29663
 2012-01-04 21:13:57 +00:00
Gabor Juhos
b8f0d86115 ar71xx: add inital support for the ALFA Network AP96 board 
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

SVN-Revision: 29662
 2012-01-04 21:13:54 +00:00
Gabor Juhos
807e046193 ar71xx: specify console kernel parameter for the Compex boards 
SVN-Revision: 29660
 2012-01-04 17:30:59 +00:00
Gabor Juhos
923f3e3752 ar71xx: allow to use the command line hack on compex devices 
SVN-Revision: 29659
 2012-01-04 17:30:58 +00:00
Gabor Juhos
2f53f82203 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7 
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

SVN-Revision: 29658
 2012-01-04 17:30:57 +00:00
Gabor Juhos
301b1b4f92 ar71xx: show correct model name on TL-WA701N/ND boards 
SVN-Revision: 29657
 2012-01-04 17:30:55 +00:00
Gabor Juhos
ac68f0d8fa ar71xx: add profile and build image for the TL-WA701N/ND boards 
SVN-Revision: 29656
 2012-01-04 17:30:54 +00:00
Gabor Juhos
72019009c7 ar71xx: fix network configuration for the TL-WA901N/ND boards 
SVN-Revision: 29654
 2012-01-04 17:30:52 +00:00
Gabor Juhos
90bfef9ec9 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards 
SVN-Revision: 29653
 2012-01-04 17:30:50 +00:00
Gabor Juhos
5eb502d9c1 ar71xx: add default LED configuration for the TL-MR3020 
Also use the system LED for diagnostic.

SVN-Revision: 29652
 2012-01-04 17:30:49 +00:00
Gabor Juhos
1045c83527 ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651
 2012-01-04 17:30:47 +00:00
Gabor Juhos
88223f87d1 ar71xx: use the new om-watchdog package for OM2P 
Signed-off-by: Antonio Quartulli <ordex@autistici.org>

SVN-Revision: 29648
 2012-01-04 17:30:41 +00:00
Jo-Philipp Wich
a788f199c9 remove current RTSP support 
SVN-Revision: 29643
 2012-01-04 00:29:29 +00:00
Jo-Philipp Wich
237282ae8c backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels (#9802) commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals) forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a packet (from another flow) was dropped, leading to various problems. 
SVN-Revision: 29642
 2012-01-03 23:08:15 +00:00
Gabor Juhos
8854c90119 ar71xx: add profile and build factory image for the Hornet-UB board 
SVN-Revision: 29637
 2012-01-01 19:30:29 +00:00
Gabor Juhos
1d3de89f3c ar71xx: build images for the ALFA Network N2/N5 boards 
SVN-Revision: 29636
 2012-01-01 19:30:28 +00:00
Gabor Juhos
1e68f10b87 ar71xx: add support for the ALFA Network N2/N5 boards 
SVN-Revision: 29635
 2012-01-01 19:30:25 +00:00
Gabor Juhos
5c067db8a7 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards 
SVN-Revision: 29631
 2011-12-31 15:02:46 +00:00
Gabor Juhos
fff02e6ea8 ar71xx: enable SWCONFIG_LEDS 
SVN-Revision: 29630
 2011-12-31 15:02:40 +00:00
Gabor Juhos
5fa65cba6e kernel: swconfig: introduce a generic switch LED trigger 
SVN-Revision: 29627
 2011-12-31 15:02:30 +00:00
Gabor Juhos
8c2482f76e ar71xx: ag71xx: implement get_port_{link,stats} callbacks 
SVN-Revision: 29626
 2011-12-31 15:02:26 +00:00
Gabor Juhos
975355a2b1 kernel: swconfig: add get_port_{link,stats} callbacks 
SVN-Revision: 29625
 2011-12-31 15:02:24 +00:00
Gabor Juhos
557009bbdb ar71xx: fix LEDs on the WRT400N 
SVN-Revision: 29624
 2011-12-31 13:54:11 +00:00
Gabor Juhos
244c322d25 ramips: rt288x: add support for the Belkin F5D8235-4 v1 board 
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29617
 2011-12-28 08:43:43 +00:00
Gabor Juhos
f50b02b559 ramips: rt288x: change base address and window size of flash bank 0 
SVN-Revision: 29616
 2011-12-28 08:43:36 +00:00
Gabor Juhos
98437278c4 ramips: rt305x: add support for the ALFA Networks W502U (R36) board 
SVN-Revision: 29615
 2011-12-28 08:43:32 +00:00
Gabor Juhos
76dacee995 ar71xx: enable sysupgrade support for airrouter 
Works for me! ;-)

Patch-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 29614
 2011-12-27 16:59:43 +00:00
Gabor Juhos
c6ee919b2a ar71xx: fix sysupgrade on PB42/PB44 boards 
SVN-Revision: 29613
 2011-12-27 16:57:01 +00:00
Gabor Juhos
723d8dd74f ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board 
SVN-Revision: 29612
 2011-12-27 16:56:30 +00:00
Jo-Philipp Wich
9fa33ceee2 add missing config symbol 
SVN-Revision: 29610
 2011-12-25 13:33:18 +00:00
Hauke Mehrtens
11125d68ed brcm47xx: fix usb on more recent bcma based devices. 
SVN-Revision: 29605
 2011-12-23 17:21:52 +00:00
Gabor Juhos
7b1e525b56 ramips: initial support for Sitecom WL-351 v1 002 
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 29604
 2011-12-23 14:27:16 +00:00
Gabor Juhos
2cb946f5b4 ramips: add support for the Senao/EnGenius ESR-9753 board 
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29603
 2011-12-23 14:27:10 +00:00
Gabor Juhos
03bce34384 ramips: define firmware partition for Omnima MiniEMBWiFi 
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>

SVN-Revision: 29602
 2011-12-23 14:27:05 +00:00
Felix Fietkau
db0a1db257 ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547) 
SVN-Revision: 29598
 2011-12-22 05:43:53 +00:00
Jonas Gorski
8799627ef0 ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H 
Thanks netprince for reporting and testing.

SVN-Revision: 29595
 2011-12-21 19:32:40 +00:00
Jo-Philipp Wich
ebefe1eb3a the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649) 
SVN-Revision: 29593
 2011-12-21 01:27:48 +00:00
Hauke Mehrtens
0cd03df3b1 brcm47xx: remove patch starting adding brcm4716 to ssb 
brcm4716 is supported by bcma now we do not need this patch

SVN-Revision: 29576
 2011-12-19 23:55:20 +00:00
Hauke Mehrtens
5b8686c303 brcm47xx: add new usb driver for bcma bus and replace ssb usb driver. 
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.

SVN-Revision: 29575
 2011-12-19 23:39:13 +00:00
Hauke Mehrtens
1aa5a61754 kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing 
SVN-Revision: 29574
 2011-12-19 23:33:03 +00:00
Hauke Mehrtens
91d0ef6f19 brcm47xx: remove support for kernel 2.6.39 
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.

SVN-Revision: 29573
 2011-12-19 23:26:15 +00:00
Felix Fietkau
11013ad947 ar71xx: add missing wireless led changes for wzr-hp-g300nh2 
SVN-Revision: 29568
 2011-12-19 09:04:15 +00:00
Felix Fietkau
0cc056cb7e ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

SVN-Revision: 29567
 2011-12-18 22:20:17 +00:00
Gabor Juhos
5a0a2b2f1b ar71xx: use 64kraw template on more TP-Link boards 
SVN-Revision: 29561
 2011-12-17 18:49:55 +00:00
Gabor Juhos
67c7980290 ar71xx: connect GMAC0 to the internal switch on DB120 
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

SVN-Revision: 29557
 2011-12-15 22:25:38 +00:00
Gabor Juhos
5bbd416e38 ar71xx: add defines for the AR934X GMAC interface 
SVN-Revision: 29556
 2011-12-15 22:25:36 +00:00
Gabor Juhos
e47a8c2bb2 ar71xx: fix GMAC1 interface speed on the DB120 board 
SVN-Revision: 29555
 2011-12-15 22:25:35 +00:00
Gabor Juhos
36bc2c2c80 ar71xx: ag71xx: fix switch port setup for AR934X 
SVN-Revision: 29554
 2011-12-15 22:25:32 +00:00
Gabor Juhos
00667c3846 ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X 
SVN-Revision: 29553
 2011-12-15 22:25:30 +00:00
Gabor Juhos
0540970345 ar71xx: ag71xx: setup switch interface mode on AR934X 
SVN-Revision: 29552
 2011-12-15 22:25:29 +00:00
Gabor Juhos
44014110b8 ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs 
SVN-Revision: 29551
 2011-12-15 22:25:28 +00:00
Gabor Juhos
e2a546d475 ar71xx: allow to attach the internal switch for AR934x 
SVN-Revision: 29550
 2011-12-15 22:25:22 +00:00
Gabor Juhos
9ae65588d8 ar71xx: introduce ar71xx_switch_data 
SVN-Revision: 29549
 2011-12-15 22:25:11 +00:00
Gabor Juhos
bfe747b7d9 ar71xx: build images for TL-WR741N/ND v2 
SVN-Revision: 29548
 2011-12-15 22:03:48 +00:00
Gabor Juhos
aefff26624 ar71x: use raw squashfs images for TP-Link boards 
SVN-Revision: 29547
 2011-12-15 22:03:46 +00:00
Gabor Juhos
d5bd28ffae ar71xx: create a template for using unpadded squashfs images 
SVN-Revision: 29546
 2011-12-15 22:03:45 +00:00
Gabor Juhos
dbc4fa4b5b ar71xx: put squash image right after the kernel on TP-Link boards 
SVN-Revision: 29545
 2011-12-15 22:03:44 +00:00
Gabor Juhos
850be54b72 ar71xx: tplinkpart: allow to detect JFFS2 as well 
SVN-Revision: 29543
 2011-12-15 22:03:40 +00:00
Gabor Juhos
b7d7481b07 ar71xx: ag71xx: check PHY IDs before accessing the switch registers 
SVN-Revision: 29541
 2011-12-15 13:25:23 +00:00