Commit graph

456 commits

Author SHA1 Message Date
Hauke Mehrtens
e1b653944d uboot-at91: make packages hidden
These packages are needed to generate the image, better mark them hidden
so we will activate them based on which boards gets build and they will
be activated always when the board which needs then gets build.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-09 22:58:49 +01:00
Hauke Mehrtens
5147e0d476 at91bootstrap: make packages hidden
These packages are needed to generate the image, better mark them hidden
so we will activate them based on which boards gets build and they will
be activated always when the board which needs then gets build.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-09 22:58:49 +01:00
Hauke Mehrtens
6fc8a44282 at91bootstrap: remove redundant definition of BUILD_SUBTARGET
It is sufficient to define this in AT91Bootstrap/Default as this is not
used for all.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-09 22:58:49 +01:00
Sandeep Sheriker Mallikarjun
21d8fce797 at91bootstrap: at91bootstrap default selection
The fixes following problems
1. changing prefix at91bootstrap to AT91bootstrap will fix the default
   selection of at91bootstrap for the selected sama5 subtarget.
2. fixed missing default selection of sama5d4 nand flash for the
   selected sama5d4 subtarget.
3. corrected at91bootstrap Title name.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2018-01-09 22:58:49 +01:00
Sandeep Sheriker Mallikarjun
c5292989ed uboot-at91: fix build after fpu activation
neon and VFPv4 support is added to this target and uboot-at91 build
fails due to TARGET_CFLAGS -mfloat-abi set to hard. as a fix, setting
uboot-at91 CFLAGS -mfloat-abi=soft.

Fixes: 01cc6bd495 ("at91: sama5: activate fpu")
Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2018-01-09 22:58:49 +01:00
Mathias Kresin
0674a99f7e kirkwood: sort occurrences of boardame alphabetically
This restores the alphabetical sort that was present
before the renaming of boardname.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-01-09 22:06:55 +01:00
Alberto Bursi
0e94df65ca uboot-envtools: add pogoplug v4
add pogoplug v4 envs support in uboot-envtools

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2018-01-09 22:06:55 +01:00
Alberto Bursi
f5d267df63 uboot-kirkwood: add uboot for pogoplug v4
add an uboot able to boot a kernel in an ubi partition

This uboot also has a "recovery" feature, before
booting from flash it will try to boot a initramfs
image called "initramfs.bin" from a FAT32-formatted
USB drive connected to the USB 2.0 port.
(u-boot lacks drivers for usb 3.0 controllers)

Just rename the initramfs image and place it on
the usb drive, the uboot will load it.

In case there is no USB drive or no such file
is found, the uboot will boot from internal flash.

The whole check takes less than a second, boot times
are not impacted.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2018-01-09 22:06:55 +01:00
Mathias Kresin
f5df635ccf kirkwood: sync image filename with boardname
Use <manufacturer>_<modelname> as image name.

Use the BOARD_NAME variable to ensure that the former used boardname is
still used as the subdirectory name for the sysupgrade-tar image, to
not break sysupgrade from earlier versions.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-01-09 22:06:55 +01:00
Mathias Kresin
c9e2c35f46 kirkwood: use the generic board detect
Drop the target specific detection function in favour of the generic
one provided by base-files.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-01-09 22:06:55 +01:00
Mathias Kresin
2f757f6035 uboot-kirkwood: fix default u-boot selection
Build the Seagate GoFlexHome u-boot for the Seagate GoFlexNet as well. The
name clearly indicates that the u-boot can be used for both boards

Build the Zyxel NSA310 u-boot if the NSA310B image is selected.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-01-09 22:06:55 +01:00
Mathias Kresin
0ebdf0c1d3 kirkwood: drop support for orphaned boards
No image build code for the Guruplug, Sheevaplug and NSA310S exists. Drop
support for the boards for now.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-01-09 22:06:54 +01:00
Matthias Schiffer
ca04884262
uboot-envtool: remove superfluous + sign from PKG_BUILD_DEPENDS
A + sign does not have meaning in build depends.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-07 19:52:05 +01:00
Hauke Mehrtens
dda2229c52 layerscape: fix package download
The git hash was changed for multiple layerscape packages without
changing the version number. The LEDE build system will not download the
packages again if the old version is already there and so some people
and the build bots are using wrong version of some packages. Use
PKG_SOURCE_DATE instead of PKG_VERSION to generate packages with the
date and the first charterers of the git hash. This will change the file
name and make the build system download them again, also if in future
the git hash is changed the file name will change and trigger a new
download.

This should fix a problem spotted by build bot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-12-21 10:02:16 +01:00
Mathias Kresin
224d4a96dd ramips: drop LinkIt Smart 7688 Duo userspace support
The  LinkIt Smart 7688/LinkIt Smart 7688 Duo are identical beside the
extra ATmega32U4 - accessible via UART - on the the Duo.

Since all relevant hardware is identical, drop the Duo special handling
in userspace.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-21 01:05:16 +01:00
Hauke Mehrtens
8e03eea875 uboot-layerscape-armv8_32b: fix package download
In commit 2b1ec44dbd ("layerscape: add ls1012afrdm device support")
The git revision and the mirror hash for this package was updated to a
version which includes ls1012afrdm-uboot.bin, but the file name at
dl/uboot-layerscape-armv8_32b-2017.09.tar.xz staid the same. This way
most user did not download the new version but used the old file.
Convert this package to the normal git clone parameters by using
PKG_SOURCE_DATE instated of PKG_VERSION, now the file name in dl also
contains the git hash and should change every time the git hash is
updated.

This should fix a problem spotted by build bot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-12-20 21:54:18 +01:00
Mathias Kresin
4a4d957d1a lantiq: sync image filename with boardname
Use <manufacturer>_<modelname> as image name.

Use the BOARD_NAME variable to ensure that the former used boardname is
still used as the subdirectory name for the sysupgrade-tar image, to
not break sysupgrade from earlier versions.

While at it, normalise the image filenames by using only lower case
characters and bin as file extension for sysupgrade images.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-16 23:33:56 +01:00
Mathias Kresin
63d7f7fc92 lantiq: use the compatible string as board name
Use the first compatible string as board name in userspace. Add the new
board name as well as the former used board name to the image metadata
to keep compatibilty with already deployed installations.

Don't add the former used boardname for boards which exists only in
master or evaluation boards.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-16 23:33:56 +01:00
Zoltan HERPAI
7b5c989ab9 merge: targets: update image generation and targets
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-12-08 19:41:18 +01:00
Hauke Mehrtens
332438be40 uboot-sunxi: fix build of HAOYU Electronics Marsboard A10
The uboot target is named MarsBoard_A10 and it was not build at all.
This fixes a build problem seen by the build bot.

Fixes: 6a3565985f ("sunxi: Added profile for HAOYU Electronics Marsboard A10")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-11-23 21:25:46 +01:00
Luis Araneda
bf6b3afa8c uboot-sunxi: add NanoPi M1 Plus board
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2017-11-17 08:20:06 +01:00
Alexander Couzens
c61a239514
add PKG_CPE_ID ids to package and tools
CPE ids helps to tracks CVE in packages.
https://cpe.mitre.org/specification/

Thanks to swalker for CPE to package mapping and
keep tracking CVEs.

Acked-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-11-17 02:24:35 +01:00
Simon Wunderlich
a479c79818 kobs-ng: add header for integer definitions
My compilation failed because of missing uint.* definitions:

In file included from mtd.h:33:0,
                 from bootstream.c:35:
BootControlBlocks.h:58:2: error: unknown type name 'uint8_t'
  uint8_t m_u8DataSetup;
  ^
BootControlBlocks.h:59:2: error: unknown type name 'uint8_t'
  uint8_t m_u8DataHold;
  ^
BootControlBlocks.h:60:2: error: unknown type name 'uint8_t'
  uint8_t m_u8AddressSetup;
  ^
BootControlBlocks.h:61:2: error: unknown type name 'uint8_t'
  uint8_t m_u8DSAMPLE_TIME;

Adding the header file fixes the problem.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
[fold changes into 001-compile.patch]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-11-16 22:56:54 +01:00
Piotr Dymacz
c7fdff157e uboot-envtools: add support for Wallys DR342
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-11-14 22:36:46 +01:00
Yangbo Lu
2b1ec44dbd layerscape: add ls1012afrdm device support
The QorIQ FRDM-LS1012A Board is an ultra-low-cost
development platform for QorIQ LS1012A Series Network
Processors built on ARM Cortex-A53 processor.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:49 +01:00
Yangbo Lu
9e7b166704 layerscape: enlarge ext4 rootfs size to 30MB
This patch is to enlarge ext4 rootfs size to 30MB.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:49 +01:00
Yangbo Lu
ede04541ba layerscape: stop pfe before starting up kernel
For ls1012ardb, pfe should be stopped before starting up
kernel.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Yangbo Lu
38417e9ce1 layerscape: update u-boot to LSDK-1709-update-103017 tag
Updated u-boot to LSDK-1709-update-103017 tag.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Yangbo Lu
69c8e8d00b layerscape: support LEDE boot for ls1088ardb/ls2088ardb
Added u-boot patches to support LEDE boot for ls1088ardb
and ls2088ardb.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Yangbo Lu
47cff4cf5f layerscape: support all-in-one firmware for ls1088ardb/ls2088ardb
Suppport all-in-one firmware for ls1088ardb/ls2088ardb by
integrating u-boot/rcw/mc/dpl/restool.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Zoltan HERPAI
f9ecb0d562 sunxi: add Orange Pi 2 support
- H3 @ 1.3 GHz
- 1GiB DDR3
- 10/100Mbps Ethernet
- Realtek RTL8189ETV wifi
- 4 USB 2.0

Difference to the "Orange Pi Plus" is the lack of Gbit ethernet
and lack of onboard flash.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-11-06 16:39:41 +01:00
Kayo Phoenix
6a3565985f sunxi: Added profile for HAOYU Electronics Marsboard A10
The MarsBoard was a short-lived credit-card sized, extendable board with an Allwinner A10 SoC.
http://linux-sunxi.org/MarsBoard_A10

Signed-off-by: Kayo Phoenix <kayo@illumium.org>
[Forward-ported to new target layout:]
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-11-06 16:39:41 +01:00
Paul Wassi
67da6a7c5e uboot-kirkwood: update to 2017.09
Upgrade uboot-kirkwood to upstream release 2017.09
Catch up with upstream and move configuration options from
simple defines to Kconfig, as otherwise dependencies would
not be resolved and code would not compile.

Tested-by: Alberto Bursi <alberto.bursi@outlook.it>
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2017-11-03 20:04:52 +01:00
Florian Fainelli
1a53315951 uboot-sunxi: Backport fix for stale CONFIG_SUNXIG_GMAC references
This backports the upstream commit fixing stale references to
CONFIG_SUNXI_GMAC which have been later replaced by CONFIG_SUN7I_GMAC.
This fixes the designware MAC pinmuxing on e.g: Lamobo R1.

Refresh patches while we are at it.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-10-23 18:42:25 -07:00
Felix Fietkau
184c92e7fb uboot-envtools: add support for Nokia WI2A-AC200i
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-10-19 12:27:44 +02:00
Sandeep Sheriker Mallikarjun
0a919afae4 at91bootstrap: remove manual copy of binaries to BIN_DIR
removed copying of binaries to BIN_DIR during install and using
default/install to install binaries to BIN_DIR folder.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-10-14 00:33:34 +02:00
Sandeep Sheriker Mallikarjun
cc443e894a at91bootstrap: Add BUILD_SUBTARGET variable
Added sama5 to BUILD_SUBTARGET variable.This will populate at91bootstrap
menu options in bootloader menu only when SAMA5 devices are selected as
SUBTARGET and to avoid showing up this menu when legacy device is
selected as SUBTARGET and fixed typo mistake: sama5d3 -> sama5d2.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-10-14 00:33:34 +02:00
Hauke Mehrtens
b4c3570666 uboot-at91: multiple build fixes
This fixes the following problems:
 * Add BUILD_DEVICES for legacy subtarget
 * Use features from u-boot.mk for sama5 subtarget This is mainly done
   by changing the prefix from uboot to U-Boot. This makes them depend
   on the sama5 subtarget and not selectable for the legacy subtarget
   any more

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-14 00:13:35 +02:00
Daniel Golle
b80f6a5876 uboot-sunxi: build for NanoPi NEO
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-10-08 17:16:39 +02:00
Yangbo Lu
2e2203ff72 layerscape: update packages with LSDK git trees
NXP Layerscape LSDK had set up its own open source web site
and github for release.

https://lsdk.github.io
https://github.com/qoriq-open-source

This patch is to update rcw/fman_ucode/u-boot packages with LSDK
git trees. Also add some patches of packages to support LEDE.
Since ARMv8 32-bit u-boot images are same with ARMv8 64-bit images
but 64-bit toolchain couldn't be used for 32-bit targets, we still
use a private tree for ARMv8 32-bit u-boot images. This is in plan
to move this private tree to NXP Layerscape github.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Yangbo Lu
806624add5 layerscape: rename subtargets and update makefile files
Rename subtargets 32b/64b with armv8_32b/armv8_64b which are
more proper, and update makefile files. There also will be other
subtargets added in the future, like armv7.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Thibaut VARENE
2be307c998 rbcfg: Implement CPU frequency control
This patch implements CPU frequency control as found on several
routerboard devices.

Supported SoCs:
- QCA953X
- AR9344

Tested on hAP lite and mAP lite (QCA953x): steps of 50MHz
Tested on LHG 5 (AR9344): steps of 50MHz

On unsupported hardware, this patch is a NOP: it will not alter the
new field.
"rbcfg help" will display an empty "cpu_freq" help listing.
"rbcfg show" will not show the cpu_freq field.
"rbcfg set/get cpu_freq" will return an error code.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
[adjusted subject]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-10-07 15:00:26 +02:00
Hauke Mehrtens
5508510e74 sunxi: add Orange Pi R1 support
The following features are working and tested:
* both Ethernet ports
* MMC
* LED

The following features are not working:
* Wifi (There is a crappy driver we could port)
* SPI flash (I haven't looked into this)

I haven't tried out the rest.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-01 17:10:33 +02:00
Lucian Cristian
1114f5dc10 sunxi: improve A20 Lime2 upload speed
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-09-30 23:50:57 +02:00
Kevin Darbyshire-Bryant
f2107fc328 ramips: improve Xiaomi Mi Router 3G support
This commit improves support for the Xiaomi Mi Router 3G originally
added in commit 6e283cdc0d

Improvements:

- Remove software watchdog as hardware watchdog now working as per
  commit 3fbf3ab44f for all mt7621
  devices.

- Reset button polarity corrected - length of press determines reboot
  (short press) vs. reset to defaults (long press) behaviour.

- Enable GPIO amber switch port LEDs on board rear - lit indicates 1Gbit
  link and blink on activity.  Green LEDs driven directly by switch
  indicating any link speed and tx activity.

- USB port power on/off GPIO exposed as 'usbpower'

- Add access to uboot environment settings for checking/setting uboot
  boot order preference from user space.

Changes:

- Front LED indicator is physically made of independent Yellow/Amber,
  Red & Blue LEDs combined via a plastic 'lightpipe' to a front panel
  indicator, hence the colour behaviour is similar to an RGB LED. RGB
  LEDs are not supported at this time because they produce colour results
  that do not then match colour labels, e.g. enabling 'mir3g:red' and
  'mir3g:blue' would result in a purple indicator and we have no such
  label for purple.
  The yellow, red & blue LEDs have been split out as individual yellow,
  red & blue status LEDs, with yellow being the default status LED as
  before and with red's WAN and blue's USB default associations removed.

- Swapped order of vlan interfaces (eth0.1 & eth0.2) to match stock vlan
  layout. eth0.1 is LAN, eth0.2 is WAN

- Add 'lwlll' vlan layout to mt7530 switch driver to prevent packet
  leakage between kernel switch init and uci swconfig

uboot behaviour & system 'recovery'

uboot expects to find bootable kernels at nand addresses 0x200000 &
0x600000 known by uboot as "system 1" and "system 2" respectively.
uboot chooses which system to hand control to based on 3 environment
variables: flag_last_success, flag_try_sys1_failed & flag_try_sys2_failed

last_success represents a preference for a particular system and is set
to 0 for system 1, set to 1 for system 2.  last_success is considered *if*
and only if both try_sys'n'_failed flags are 0 (ie. unset) If *either*
failed flags are set then uboot will attempt to hand control to the
non failed system. If both failed flags are set then uboot will check
the uImage CRC of system 1 and hand control to it if ok.  If the uImage
CRC of system is not ok, uboot will hand control to system 2
irrespective of system 2's uImage CRC.

NOTE: uboot only ever sets failed flags, it *never* clears them. uboot
sets a system's failed flag if that system's was selected for boot but
the uImage CRC is incorrect.

Fortunately with serial console access, uboot provides the ability to
boot an initramfs image transferred via tftp, similarly an image may
be flashed to nand however it will flash to *both* kernels so a backup
of stock kernel image is suggested. Note that the suggested install
procedure below set's system 1's failed flag (stock) thus uboot ignores
the last_success preference and boots LEDE located in system 2.

Considerable thought has gone into whether LEDE should replace both
kernels, only one (and which one) etc. LEDE kernels do not include a
minimal rootfs and thus unlike the stock kernel cannot include a
method of controlling uboot environment variables in the event of
rootfs mount failure. Similarly uboot fails to provide an external
mechanism for indicating boot system failure.

Installation - from stock.

Installation through telnet/ssh:
- copy lede-ramips-mt7621-mir3g-squashfs-kernel1.bin and
  lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin to usb disk or wget it
  from LEDE download site to /tmp
- switch to /extdisks/sda1/ (if copied to USB drive) or to /tmp if
  wgetted from LEDE download site
- run: mtd write lede-ramips-mt7621-mir3g-squashfs-kernel1.bin kernel1
- run: mtd write lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin rootfs0
- run: nvram set flag_try_sys1_failed=1
- run: nvram commit
- run: reboot

Recovery - to stock.

Assuming you used the above installation instructions you will have a
stock kernel image in system 1. If it can be booted then it may be used
to perform a stock firmware recovery, thus erasing LEDE completely. From
a 'working' LEDE state (even failsafe)

Failsafe only:
- run: mount_root
- run: sh /etc/uci-defaults/30_uboot-envtools
Then do the steps for 'All'

All:
- run: fw_setenv flag_try_sys2_failed 1
- run: reboot

The board will reboot into system 1 (stock basic kernel) and wait with
system red light slowly blinking for a FAT formatted usb stick with a
recovery image to be inserted.  Press and hold the reset button for
around 1 second. Status LED will turn yellow during recovery and blue
when recovery complete.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-09-28 09:20:36 +02:00
Marko Ratkaj
56348c95e9 uboot-mvebu: add OpenSSL compat patches
Fixes the following build issue: "undefined reference to `EVP_MD_CTX_create'"

From: Jelle van der Waa <jelle@vdwaa.nl>

The rsa_st struct has been made opaque in 1.1.x, add forward compatible
code to access the n, e, d members of rsa_struct.

EVP_MD_CTX_cleanup has been removed in 1.1.x and EVP_MD_CTX_reset should be
called to reinitialise an already created structure.

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-09-25 23:08:33 +02:00
Marko Ratkaj
49e6e9ca39 uboot-mvebu: fix SETEXPR redefinition warning
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-09-25 23:08:32 +02:00
Marko Ratkaj
ad0e107c23 uboot-mvebu: add missing UBOOT_MAKE_FLAGS variable
This patch removes "/bin/sh: HOSTCPPFLAGS: command not found" errors douring build.

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-09-25 22:38:29 +02:00
Lucian Cristian
a7465f375a sunxi: add Olimex A20-OLinuXino-LIME2-eMMC
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
[replaced u-boot patch with original version from u-boot git]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-09-24 16:28:28 +02:00
Stijn Tintel
6c32e05218 arm-trusted-firmware-sunxi: depend on sunxi target
The arm-trusted-firmware-sunxi package is only used by the Allwinner
A64, so only make it selectable for its subtarget sunxi/cortexa53.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-09-20 23:49:36 +03:00