Commit graph

12769 commits

Author SHA1 Message Date
Felix Fietkau
e3072599f6 ath9k: don't run periodic and nf calibration at the same time
Might fix some stability issues on older chips

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-05 11:09:12 +01:00
Felix Fietkau
84bd74057f build: use mkhash to replace various quirky md5sum/openssl calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-05 11:09:12 +01:00
Stijn Tintel
ed69e93262 kernel/modules: add SSSE3 SHA512 module
This module is optimized for SSSE3/AVX/AVX2.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-04 13:20:33 +01:00
Stijn Tintel
86de53203e kernel/modules: add SSSE3 SHA256 module
This module is optimized for SSSE3/AVX/AVX2/SHA-NI.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-04 13:20:33 +01:00
Stijn Tintel
159e82d0db kernel/modules: add SSSE3 SHA1 module
This module is optimized for SSSE3/AVX/AVX2/SHA-NI.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-04 13:20:33 +01:00
Felix Fietkau
c296ba834d Revert "ath9k: Add airtime fairness scheduler"
This reverts commit 528f46d082.
After this commit, several users reported stability issues. Revert it
now so it doesn't cause issues for the upcoming release

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-04 01:13:58 +01:00
Arjen de Korte
10f91525bc dnsmasq: add DHCP Unique Identifier for DHCPv6
Add DHCPv6 matching by DHCP Unique Identifier (RFC-3315) in addition to
existing MAC-address (RFC-6939). The latter is not widely supported yet.

Signed-off-by: Arjen de Korte <build+lede@de-korte.org>
2017-01-03 22:27:23 +01:00
Hans Dedecker
1175a5b153 odhcpd: bump to git HEAD version
091d8a9 dhcpv6-ia: fix static assignment check
11ce6b5 dhcpv6-ia: coding style fixes
561890e dhcpv6-ia: update valid_until only for non static DHCPv6 leases
0b45fce dhcpv4: coding style fixes
95b76c2 README: Add host leasetime uci parameter
541219e dhcpv6-ia: fix invalid IPv6/hostname entries in statefile
13937ab dhcpv6-ia: fix delete logic of an assignment in reconf_timer
60c3969 dhcpv6-ia : code style fixes
bf4ebc0 config: use free_lease to delete a lease
c24782a config: coding style fixes
0572d1a config: Create statefile dir
ec833f4 dhcpv6-ia: use free_dhcpv6_assignment where needed
1d55edb dhcpv6-ia: make free_dhcpv6_assignment static
f01e538 dhcpv4: make dhcpv4_msg_to_string static
700f5ab dhcpv4: fix DHCPv4 hostname handling
4c89614 Limit lifetime of non-static leases in case of release and
decline

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-01-03 22:25:13 +01:00
Hans Dedecker
34fa03ea16 odhcp6c: bump to git HEAD version
5d6fec3 Merge pull request #50 from sartura/libubox_md5_reuse
33a2ba1 odhcp6c: reuse md5 from libubox

Switch PKG_SOURCE_URL to git.lede-project.org/project/odhcp6c.git

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-01-03 22:25:13 +01:00
Stijn Tintel
388681fe53 hostapd: enable SHA256-based algorithms
Enable support for stronger SHA256-based algorithms in hostapd and
wpa_supplicant when using WPA-EAP or WPA-PSK with 802.11w enabled.

We cannot unconditionally enable it, as it requires hostapd to be
compiled with 802.11w support, which is disabled in the -mini variants.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Sebastian Kemper <sebastian_ml@gmx.net>
2017-01-03 20:53:49 +01:00
Stijn Tintel
30f14f6198 hostapd: add function to handle wpa_key_mgmt
Now that wpa_key_mgmt handling for hostapd and wpa_supplicant are
consistent, we can move parts of it to a dedicated function.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Sebastian Kemper <sebastian_ml@gmx.net>
2017-01-03 20:53:48 +01:00
Stijn Tintel
bdcffb9bb6 wpa_supplicant: rework wpa_key_mgmt handling
Rework wpa_key_mgmt handling for wpa_supplicant to be consistent with
how it is done for hostapd.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Sebastian Kemper <sebastian_ml@gmx.net>
2017-01-03 20:53:48 +01:00
Stijn Tintel
b13e103d71 ath5k: select 802.11w support
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-03 20:53:48 +01:00
Roger Pueyo Centelles
c6d3a62919 gre: add different per-protocol prefixes to GRE-TAP IPv4/6 tunnel interfaces.
This commit modifies the /lib/netifd/proto/gre.sh script so that, when
GRE-TAP tunnels are created, either IPv4 or IPv6, the prefix before the chosen
interface name contains the "tap" substring, to differentiate them from non-TAP
GRE tunnels.

Right now, both GRE and GRE-TAP tunnel (either IPv4 or IPv6) interfaces defined
in /etc/config/network are named equally ("gre-"+$ifname or "grev6"+$ifname)
upon creation. For instance, the following tunnels:

        config interface 'tuna'
                option peeraddr '172.30.22.1'
                option proto 'gre'

        config interface 'tunb'
                option peeraddr '192.168.233.4'
                option proto 'gretap'

        config interface 'tunc'
                option peer6addr 'fdc5:7c9e:e93d:45af::1'
                option proto 'grev6'

        config interface 'tund'
                option peer6addr 'fdc0:6071:1348:31ff::2'
                option proto 'grev6tap'

are named, respectively, "gre-tuna", "gre-tunb", "grev6-tunc" and "grev6-tund".

The current change makes that each GRE tunnel interface of the four different
types available (gre, gretap, grev6 and grev6tap) gets a different prefix.
Therefore, the abovementioned tunnels will be named, respectively:
"gre4-tuna", "gre4t-tunb", "gre6-tunc" and "gre6t-tund".

This is coherent with other types of virtual interfaces (i.e. PPP, PPPoE, PPPoA)
where the whole protocol name is used. For instance, a PPPoA interface named
"p1" and a PPPoE interface named "p2" will respectively appear as "pppoa-p1"
and "pppoe-p2", not as "ppp-p1" and "ppp-p2").

Since Linux interfaces names are limited to 15 characters, these prefixes leave,
for the worst case (TAP tunnels), 9 characters for the actual name.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2017-01-03 14:36:37 +01:00
Luiz Angelo Daros de Luca
0bb474652e elfutils: bump to 0.168
Other changes:
- Project moved to sourceware.org
- musl patch where cleaned up and submitted upstream
- TEMP_FAILURE_RETRY macro fixed and submitted upstream

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
[Jo-Philipp Wich: add missing .patch extension to 007-fix_TEMP_FAILURE_RETRY]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-03 14:32:35 +01:00
Rosen Penev
558680012d curl: Remove PolarSSL and adjust default to mbedTLS
luci-ssl has already made the switch since mainline support for PolarSSL is
almost over (2016).

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2017-01-03 14:26:41 +01:00
Daniel Engberg
0050b39fd4 gmp: Update to 6.1.2
Update GMP to 6.1.2

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-01-03 14:24:33 +01:00
Daniel Engberg
6099f22097 zlib: Update to 1.2.9
Update zlib to 1.2.9 and switch to XZ tarballs for download.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-01-03 14:24:33 +01:00
Daniel Engberg
bb4afdc8bc libusb: Update to 1.0.21
Update libusb to 1.0.21

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2017-01-03 14:24:33 +01:00
Florian Fainelli
1618c4abdb rpcd: Update to 2016-12-03
Brings in the following changes:

0577cfc1acdb cmake: Find libubox/blobmsg_json.h
26c98ec94d7a sys: Check return values of chdir and write
f4089654a399 cmake: Find libubus.h

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-02 21:06:14 +01:00
Florian Fainelli
9bf2bc7587 fstools: Update to 2016-12-04
Brings in the following changes:
84b530a732b1 libfstools: Check return values for fread and system

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-02 21:06:14 +01:00
Florian Fainelli
55209a9df9 uclient: Update to 2016-12-09
Brings in the following changes:

52d955fd802a remove obsolete mac os x /opt/local include/library search path
a4e49b4163b2 Fix unused results warnings
48cfff3fbec9 uclient-http: send correct "Host:" header if port is set

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-02 21:06:13 +01:00
Mathias Kresin
8c822ec4ca uboot-lantiq: fix boot of images larger than 8MB
Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to
support uncompressing images larger than 8 MB when using the bootm
command.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-02 19:16:54 +01:00
Mathias Kresin
cfe1c6debe uboot-lantiq: fix build with gcc6
Backport u-boot commit 9b2c282b348dfe966bbba967dc7a45ce817cce50 to fix
compile with gcc5 and gcc6.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-02 19:16:54 +01:00
Alexis Green
fd718c5025 mac80211: Allow HT/VHT rates when running unencrypted mesh.
Signed-off-by: Alexis Green <agreen@cococorp.com>
2017-01-02 16:47:59 +01:00
Alberto Bursi
8496659eb4 base-files: fix message of initscript wrapper
currently (after blogic's edit to my commit) it prints like this:

root@lede:/# service aa
aa does not exist. the following services are available :adblock       dnsmasq       gpio_switch   rpcd          system
boot          done          led           sqm           uhttpd
crelay        dropbear      log           sysctl        umount
cron          firewall      network       sysfixtime    urandom_seed
ddns          fstab         odhcpd        sysntpd

which looks pretty bad, and is even worse if someone writes only "service" without arguments, as it will print " does not exist. " which is confusing.

with this commit it looks like this:

root@lede:/# service
service "" not found, the following services are available:
adblock       dnsmasq       gpio_switch   rpcd          system
boot          done          led           sqm           uhttpd
crelay        dropbear      log           sysctl        umount
cron          firewall      network       sysfixtime    urandom_seed
ddns          fstab         odhcpd        sysntpd

Yes there is some play with " and ', it is to display "name" or just "" if no service name is entered (like in the example).

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-01-02 16:47:59 +01:00
George Amanakis
5639e45614 generic: package Broadcom BNX2 driver
bnx2 driver support for the x86 architecture. Includes module and
firmware for Broadcom BCM5706/5708/5709/5716 ethernet adapters.

Signed-off-by: George Amanakis <g_amanakis@yahoo.com>
2017-01-02 16:47:59 +01:00
Hauke Mehrtens
1436e15488 curl: update to version 7.52.1
This fixes the folowing security problems:

CVE-2016-9586: printf floating point buffer overflow
CVE-2016-9952: Win CE schannel cert wildcard matches too much
CVE-2016-9953: Win CE schannel cert name out of buffer read
CVE-2016-9594: unititialized random

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-02 13:07:10 +01:00
Hannu Nyman
b7677f05d6 ustream-ssl: remove extra DEFAULT_VARIANT from libustream-polarssl
Currently both libustream-polarssl and libustream-mbedtls
variants define themselves as the DEFAULT_VARIANT

Remove extra DEFAULT_VARIANT from libustream-polarssl.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-12-30 17:38:39 +01:00
Magnus Kroken
39d3a4117b openvpn: update to 2.4.0
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2016-12-30 13:07:41 +01:00
Magnus Kroken
8ed11ebf7d mbedtls: enable DHE-RSA key exchange
Later OpenVPN 2.3-openssl versions only enable
TLS cipher suites with perfect forward secrecy, i.e. DHE and ECDHE
cipher suites. ECDHE key exchange is not supported by
OpenVPN 2.3-openssl, enable DHE key exchange to allow LEDE
OpenVPN 2.4-mbedtls clients to connect to such servers.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reported-by: Lucian Cristian <luci@createc.ro>
2016-12-30 13:06:43 +01:00
Magnus Kroken
ca963bbf5f mbedtls: enable secp384r1 elliptic curve support
Secp384r1 is the default curve for OpenVPN 2.4+. Enable this to
make OpenVPN-mbedtls clients able to perform ECDHE key exchange
with remote OpenVPN 2.4-openssl servers that use the default
OpenVPN curve.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2016-12-30 13:06:25 +01:00
Felix Fietkau
ae37f2310b mbedtls: enable support for external private RSA keys to fix openvpn build issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-28 22:56:36 +01:00
Felix Fietkau
c9c68c7177 ath9k: fix issues with external reset on AR913x
An external reset patch for AR955x accidentally led to external reset
being issued twice on AR913x, once before the RTC reset and once after.
This may be causing some stability issues.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 20:55:35 +01:00
Felix Fietkau
6b524fe5b8 relayd: fix expiry time handling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 13:21:42 +01:00
Felix Fietkau
3f20fd4ee0 relayd: fix reload / interface restart issues
- replace the hotplug script with an interface trigger
- add netdev params to procd to trigger restart

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 13:20:33 +01:00
Felix Fietkau
f04b651453 ath5k: drop bogus warning on drv_set_key with unsupported cipher (FS#334)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 12:18:36 +01:00
Felix Fietkau
00ad43f047 ath9k: remove old rx dma stop check optimization
This commit was added to improve reset time on old SoC devices that run
into chip hangs more frequently. However with the more recent addition
of full WMAC reset on these chips, it could be problematic.
Drop this patch to ensure that DMA activity is really stopped before the
chip reset is issued

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 12:18:36 +01:00
Stijn Tintel
1b5640be33 odhcpd: bump to git HEAD
8dc2a59 Revert "Respect interface "ignore" settings as documented."
93ab25b router: skip parse_routes when ra_default > 1

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-12-27 10:50:29 +01:00
Jo-Philipp Wich
e1d1c31890 opkg: vfork external gzip command to uncompress data
Opkg's builtin decompression code is unsuitable to process nested archives as
it uses a single shared state and relies on undefined seek behaviour for pipes.

Rework the extraction logic to use the external gzip command as I/O filter for
decompressing data and remove the builtin inflate code entirely.

This shrinks the final opkg binary by about 4KB and results in less runtime
memory consumption due to efficient use of vfork() and less copy-on-write
operations in the forked child.

Rework by Felix: create a thread that relays data to the gzip process
instead of using a fragile poll loop

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 09:50:00 +01:00
Stijn Tintel
dc5f496a0d Revert "opkg: vfork external gzip command to uncompress data"
This reverts commit 0090adcd5c.
It breaks reading package list in /tmp/opkg-lists, making it impossible
to install packages from feeds in snapshots.
2016-12-27 04:41:30 +01:00
Hans Dedecker
bdd2b67414 odhcpd: Use procd_send_signal in reload_service
Replace killall HUP by procd_send_signal in reload_service to trigger
an odhcpd config reload

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-12-26 22:32:38 +01:00
Felix Fietkau
d3489d899a opkg: add missing dependency on libpthread
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-26 15:52:00 +01:00
Gabe Rodriguez
94030e86d5 mwlwifi: Update to latest source
-MAC register revisions for 8864 firmware

Tested on WRT1900ACv1 (mvebu). No regressions

Signed-off-by: Gabe Rodriguez <lifehacksback@gmail.com>
2016-12-26 11:17:33 +01:00
Alberto Bursi
c24172cad1 package/Makefile & ipkg-make-index.sh: add full package data list
The external script used to generate the package lists for the
LEDE wiki's table of packages [1] and package indexes [2] requires
a "Source:" field in the package lists to find package makefiles.
The package makefiles are used to read the package's Category and Submenu.

The "Source:" field was removed in commit
b4aa3c899c
to reduce package list sizes and lessen opkg issues in low ram devices.

Add a separate package list file with full data to be used by the wiki's script.
It's called Packages.manifest and isn't compressed as it's not necessary.

1. https://lede-project.org/packages/start
2. https://lede-project.org/packages/index/start

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-12-26 11:17:33 +01:00
Jo-Philipp Wich
0090adcd5c opkg: vfork external gzip command to uncompress data
Opkg's builtin decompression code is unsuitable to process nested archives as
it uses a single shared state and relies on undefined seek behaviour for pipes.

Rework the extraction logic to use the external gzip command as I/O filter for
decompressing data and remove the builtin inflate code entirely.

This shrinks the final opkg binary by about 4KB and results in less runtime
memory consumption due to efficient use of vfork() and less copy-on-write
operations in the forked child.

Rework by Felix: create a thread that relays data to the gzip process
instead of using a fragile poll loop

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-26 11:17:32 +01:00
Felix Fietkau
d109d03198 kernel: split kmod-lib-zlib into two packages to keep it in sync with kernel dependencies
Fixes build error on default config + selecting kmod-fs-isofs

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-26 11:11:49 +01:00
Hans Dedecker
2e41b2c37a netifd: Upstep to git HEAD version
64a655d proto: allow configuring deprecated static IPv6 addresses
c99182e remove obsolete /opt/local prefix on Mac OS X
0249d5f system-linux: Don't set gre tunnel ttl by default to 64 (#FS312)
edc15ca ubus: Display the IPv6 prefix assigned address

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-12-25 21:01:02 +01:00
Hans Dedecker
4c9d2c04ba gre: Remove ttl default value assignment (FS#312)
Don't assign a default ttl of 64 for gre tunnels as
netifd takes care of the default ttl assignment

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-12-25 21:00:44 +01:00
Hauke Mehrtens
4af4f21492 ltq-vmmc: mark VOICE_CPE_VMMC_PMC as broken
We do not have the needed platform support for VOICE_CPE_VMMC_PMC. The
vmmc driver will not compile with this option activated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-12-25 18:43:55 +01:00