Gabor Juhos
|
6bfdc7c998
|
rtl8366s: reset the chip early, this allows ethernet to work as soon as possible
SVN-Revision: 19355
|
2010-01-27 21:01:48 +00:00 |
|
Gabor Juhos
|
49c4df5487
|
rtl8366: make it available on all platforms
SVN-Revision: 19329
|
2010-01-25 15:13:38 +00:00 |
|
Gabor Juhos
|
21742847bd
|
kernel: change debounce logic in the gpio-buttons driver
* thanks to Nuno Gonçalves
SVN-Revision: 19115
|
2010-01-13 10:18:24 +00:00 |
|
Felix Fietkau
|
2d61e4c580
|
deduplicate kernel source files from 2.6.30-2.6.32 by moving them to generic files/
SVN-Revision: 18927
|
2009-12-25 10:34:21 +00:00 |
|
Felix Fietkau
|
2bff4bf4e5
|
rtl8306: manage the wan port as a separate phy device with proper link status reading and autonegotiation - the genphy driver does not handle it properly
SVN-Revision: 18709
|
2009-12-09 03:25:33 +00:00 |
|
Felix Fietkau
|
ddc2e2270b
|
ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes wan port detection (#6309)
SVN-Revision: 18699
|
2009-12-08 14:06:18 +00:00 |
|
Felix Fietkau
|
df35ee622f
|
fix link status detection in various switch drivers
SVN-Revision: 18698
|
2009-12-08 14:06:09 +00:00 |
|
Felix Fietkau
|
30e635c55b
|
move the updated version (for 2.6.30+) of ar8216/mvswitch to the generic files directory and remove patches for older kernel versions (no longer in use)
SVN-Revision: 17594
|
2009-09-16 12:24:46 +00:00 |
|
Felix Fietkau
|
6e28b28c5e
|
add a driver for rtl8306 switches
SVN-Revision: 17248
|
2009-08-14 00:52:17 +00:00 |
|
Felix Fietkau
|
3e7d58574f
|
ar8216: rename the vlan attribute to enable_vlan to keep it consistent with other drivers
SVN-Revision: 16770
|
2009-07-11 01:21:01 +00:00 |
|
Felix Fietkau
|
3455f00d7a
|
ar8216: fix transmission of large frames by setting the switch mtu
SVN-Revision: 16629
|
2009-06-29 21:54:16 +00:00 |
|
Felix Fietkau
|
c1918c778c
|
ar8216: add delay for page switching to work around register setting corruption. use packet mangling to fix up the vlan for incoming packets (workaround for hardware bug, which renders normal 802.1q support unusable)
SVN-Revision: 16442
|
2009-06-14 03:32:01 +00:00 |
|
Felix Fietkau
|
4e12c9d210
|
fix a crash in ip175c attribute enumeration
SVN-Revision: 15506
|
2009-04-30 13:57:22 +00:00 |
|
Felix Fietkau
|
a523450678
|
Add a driver for Atheros AR8216 switches Thanks to Vertical Communications, Inc. for providing access to the documentation
SVN-Revision: 15482
|
2009-04-29 13:02:41 +00:00 |
|
Felix Fietkau
|
8ec2ad91ad
|
swconfig: add a generic switch reset call
SVN-Revision: 15470
|
2009-04-28 19:16:17 +00:00 |
|
Felix Fietkau
|
3fce73ce46
|
clean up the ip175c driver some more, add support for setting the pvid and fix querying the phy status
SVN-Revision: 15308
|
2009-04-20 21:26:44 +00:00 |
|
Felix Fietkau
|
f6f55bae7d
|
swconfig: add a generic method for setting the port primary vlan id (used for transparently fixing up pvid for untagged port when setting vlan ports)
SVN-Revision: 15307
|
2009-04-20 21:26:39 +00:00 |
|
Felix Fietkau
|
4320a28228
|
add IC+ IP175C driver (based on Patrick Horn's driver, see #4050)
SVN-Revision: 15305
|
2009-04-20 18:57:55 +00:00 |
|
Felix Fietkau
|
787e9fcf93
|
swconfig: treat struct switch_attr as constant
SVN-Revision: 15302
|
2009-04-20 18:57:36 +00:00 |
|
Felix Fietkau
|
cd80e16a80
|
swconfig: remove old debugging stuff
SVN-Revision: 15301
|
2009-04-20 18:57:30 +00:00 |
|
Andy Boyett
|
24aedf8281
|
files/fs/yaffs2: revert changes in r15242 that break patching on 2.6.28
SVN-Revision: 15248
|
2009-04-18 06:29:23 +00:00 |
|
Felix Fietkau
|
34939cad39
|
get rid of $Id$ - it has never helped us and it has broken too many patches ;)
SVN-Revision: 15242
|
2009-04-17 14:09:46 +00:00 |
|
Felix Fietkau
|
1929c7511c
|
mvswitch: re-enable header mode
SVN-Revision: 15186
|
2009-04-10 11:33:49 +00:00 |
|
Felix Fietkau
|
bfa8064ccd
|
atheros: in later kernels, vlan 0 no longer works as expected, switch to (1,2) instead of (0,1) for lan/wan
SVN-Revision: 14981
|
2009-03-22 20:19:23 +00:00 |
|
Felix Fietkau
|
f972eb41b5
|
mvswitch,adm6996: use phy fixups instead of a nonstandard patch for hardware detection
SVN-Revision: 14977
|
2009-03-22 20:18:36 +00:00 |
|
Gabor Juhos
|
404fa66215
|
generic-2.6: make MyLoader parser compatible with the old partition tables
SVN-Revision: 14155
|
2009-01-23 11:54:44 +00:00 |
|
Felix Fietkau
|
50781f3a8b
|
move linux/switch.h to generic files/ instead of the kernel version specific directories
SVN-Revision: 13649
|
2008-12-15 13:04:15 +00:00 |
|
Gabor Juhos
|
6113df9095
|
add NP25G and WP543 board id
SVN-Revision: 13316
|
2008-11-22 19:40:11 +00:00 |
|
Gabor Juhos
|
e1e65079b4
|
ocf: move all stuff into files, and fix build error on .25
SVN-Revision: 13288
|
2008-11-19 12:25:39 +00:00 |
|
Gabor Juhos
|
442db57b96
|
move MyLoader partition parser into generic files, will be used on ar71xx
SVN-Revision: 13256
|
2008-11-17 10:14:58 +00:00 |
|
Gabor Juhos
|
300d8bea55
|
move MyLoader stuff into generic files, will be used on adm5120
SVN-Revision: 13254
|
2008-11-17 09:19:27 +00:00 |
|
Felix Fietkau
|
d1b986bd54
|
improve routing/nat performance for devices using the marvell 88e6060 switch
SVN-Revision: 13060
|
2008-10-28 17:54:22 +00:00 |
|
Felix Fietkau
|
5065bb589a
|
remove more redundant files and clone files-2.6.23 for 2.6.24 - fixes rdc build errors
SVN-Revision: 13022
|
2008-10-22 06:51:06 +00:00 |
|
Felix Fietkau
|
1e570a9288
|
change the way ./files* and the generic kernel files are applied. ./files now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers.
SVN-Revision: 13010
|
2008-10-18 21:43:30 +00:00 |
|
Gabor Juhos
|
5d46bb5efc
|
make gpio_dev compatible with GPIOLIB & GPIO_SYSFS (closes #4016)
SVN-Revision: 12864
|
2008-10-05 13:08:12 +00:00 |
|
Gabor Juhos
|
3527e7a649
|
modules/gpio_dev: move to drivers/char/ on older kernels as well, and create a package for it
SVN-Revision: 12133
|
2008-08-05 09:52:23 +00:00 |
|
John Crispin
|
a641792a78
|
makes ledtrignetdev work on .26 and fix whitespaces
SVN-Revision: 12090
|
2008-08-04 14:05:04 +00:00 |
|
Felix Fietkau
|
c7150f281c
|
add missing defines for mvswitch
SVN-Revision: 11895
|
2008-07-21 18:12:38 +00:00 |
|
Felix Fietkau
|
3ad51a1c33
|
some more mvswitch fixes: - initialize the vlan destination map properly - workaround for moving node bug: clear the ATU database on every PHY poll
SVN-Revision: 11881
|
2008-07-19 23:09:56 +00:00 |
|
Felix Fietkau
|
87e673487a
|
add extra safety for the packet mangling in the mvswitch driver
SVN-Revision: 11880
|
2008-07-19 23:09:43 +00:00 |
|
Gabor Juhos
|
306910e5d1
|
generic-2.6: revert yaffs changes [11378], the new code is not working correctly on RouterBoards
SVN-Revision: 11427
|
2008-06-10 08:20:19 +00:00 |
|
Felix Fietkau
|
b014357704
|
set marvell switch ATU ageing time to minimum instead of maximum - hopefully fixes some fonera 2.0 ethernet issues
SVN-Revision: 11410
|
2008-06-09 10:31:46 +00:00 |
|
Gabor Juhos
|
477d43b281
|
generic-2.6: sync yaffs code with the official CVS tree
SVN-Revision: 11378
|
2008-06-06 12:52:39 +00:00 |
|
Gabor Juhos
|
15dd4cdcd2
|
nuke trailing whitespaces in the yaffs code
SVN-Revision: 11277
|
2008-05-28 07:31:26 +00:00 |
|
Peter Denison
|
3b7d3cf074
|
Remove bogus zero-length ohci-ssb.c in generic-2.6/files
SVN-Revision: 11190
|
2008-05-18 20:55:06 +00:00 |
|
Felix Fietkau
|
9e0ee80132
|
enable a different pseudo-vlan mode in the marvell switch (uses a proprietary header instead of a proprietary trailer) - fixes some mtu issues
SVN-Revision: 10975
|
2008-04-29 12:55:44 +00:00 |
|
Felix Fietkau
|
c3fcb26d47
|
allow bigger packets in the marvell switch (does not fix the mtu problems yet)
SVN-Revision: 10970
|
2008-04-28 21:59:06 +00:00 |
|
Felix Fietkau
|
86bbc820d5
|
fix vlan mapping for cpu port on the marvell switch
SVN-Revision: 10934
|
2008-04-24 01:09:47 +00:00 |
|
Felix Fietkau
|
69999abeda
|
clear VLANTunnel bit on the marvell switch ports - should help with some bridging issues
SVN-Revision: 10931
|
2008-04-23 16:28:05 +00:00 |
|
Felix Fietkau
|
11d94ce083
|
Add support for the ultra-crappy Marvell 88E6060, which is used in Fonera+ and the upcoming Fonera 2.0
SVN-Revision: 10876
|
2008-04-20 08:29:01 +00:00 |
|