Commit graph

7702 commits

Author SHA1 Message Date
Gabor Juhos
e17a3ffbbd ramips: extract eeprom for the built-in wlan module on the RT-N56U
SVN-Revision: 30604
2012-02-16 20:06:22 +00:00
Gabor Juhos
dabca24361 ramips: rt3883: change eeprom file name
SVN-Revision: 30603
2012-02-16 20:06:21 +00:00
Vasilis Tsiligiannis
eed8e2a4fd Disable by default padding of images
SVN-Revision: 30590
2012-02-16 17:54:07 +00:00
Vasilis Tsiligiannis
8676e49d9d Allow gzipping of squashfs images with padded jffs2 partition
SVN-Revision: 30589
2012-02-16 17:54:04 +00:00
Vasilis Tsiligiannis
ab09db09fc GZip only ext4 and padded images
SVN-Revision: 30588
2012-02-16 17:54:01 +00:00
Vasilis Tsiligiannis
b4f51343c6 Make gzipping of images configurable via menuconfig
SVN-Revision: 30587
2012-02-16 17:53:57 +00:00
Gabor Juhos
3004f30f01 ar71xx: remove duplicated define from the D-Link profile
SVN-Revision: 30577
2012-02-16 09:03:27 +00:00
Gabor Juhos
00d963999d ramips: select HW_HAS_PCI on per-board basis
SVN-Revision: 30576
2012-02-16 08:17:54 +00:00
Gabor Juhos
fc967295ec ramips: rt3883: remove a stray character from rt3883.h
SVN-Revision: 30575
2012-02-16 08:17:53 +00:00
Gabor Juhos
b4af07d5c0 ramips: rt288x: don't register the PCI controller on each board
SVN-Revision: 30574
2012-02-16 08:17:52 +00:00
Gabor Juhos
f8a56dc8df ramips: raeth: separate ring allocation and setup
SVN-Revision: 30573
2012-02-16 08:17:50 +00:00
Gabor Juhos
d186c17aa6 generic: add SND_PPC symbol
SVN-Revision: 30572
2012-02-16 07:51:44 +00:00
Daniel Dickinson
1bb8a7613e Add Ubiquiti UniFi Profile; It's an AP without USB so don't include USB drivers by default
SVN-Revision: 30571
2012-02-16 07:45:28 +00:00
Daniel Dickinson
b797f72319 d-link: Add DIR-601 Profile Definition; It needs different factory images than DIR-600
SVN-Revision: 30570
2012-02-16 07:38:33 +00:00
Daniel Dickinson
c736e2d4b0 Fix partitions for Cameo-based boards; kernel 3.2 is bigger
SVN-Revision: 30569
2012-02-16 07:29:26 +00:00
Daniel Dickinson
4685a51301 image: For Cameo-based board fix adding mtd layout to kernel commandline)
SVN-Revision: 30568
2012-02-16 07:24:45 +00:00
Jo-Philipp Wich
8dc1ff6cb1 linux 3.2: missing generic symbols
These symbols are dependent on CONFIG_PCI being enabled.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 30565
2012-02-15 23:37:47 +00:00
Gabor Juhos
49fc54be3d ramips: rt288x: fix PCI resource conflict
SVN-Revision: 30563
2012-02-15 21:19:02 +00:00
Florian Fainelli
37f8c19028 correct PCI IO/Mem resource swapping
SVN-Revision: 30562
2012-02-15 21:13:21 +00:00
Florian Fainelli
3ceebbba14 add Ralink V11ST-FE board support
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot

SVN-Revision: 30561
2012-02-15 21:13:11 +00:00
Gabor Juhos
8b8d9a8336 ramips: raeth: add a helper function for skb allocation
SVN-Revision: 30555
2012-02-15 18:33:42 +00:00
Gabor Juhos
e57546de83 ramips: raeth: use netdev_alloc_skb
SVN-Revision: 30554
2012-02-15 18:33:41 +00:00
Gabor Juhos
064855314b ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures
This helps GCC to generare more efficient code.

SVN-Revision: 30553
2012-02-15 18:33:40 +00:00
Gabor Juhos
8c95385d78 ramips: raeth: use 're' instead of 'priv' everywhere
SVN-Revision: 30552
2012-02-15 18:33:38 +00:00
Gabor Juhos
b3b79365f3 ramips: raeth: force link down in ramips_phy_stop
SVN-Revision: 30550
2012-02-15 13:47:52 +00:00
Gabor Juhos
3e7b461431 ramips: raeth: serialize ramips_link_adjust calls
SVN-Revision: 30549
2012-02-15 13:47:50 +00:00
Gabor Juhos
dcb13d4098 ramips: raeth: add PHYLIB support
SVN-Revision: 30547
2012-02-15 06:47:12 +00:00
John Crispin
23b2bd9494 linux-atm: update solos-pci driver to upstream
Fixes for the solos-pci driver.

- Corrects calculation of headroom for padding.
- Removes pointless debug messages.
- Expose Bis A and Bis M annex capabilities.
- Expose hardware revision.

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 30541
2012-02-14 20:11:24 +00:00
John Crispin
9e5b8ad833 linux-atm: headroom/padding fixes
Submitted upstream to netdev by Chas Williams on linux-atm.

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 30540
2012-02-14 20:11:22 +00:00
John Crispin
1a71f07d00 generate uboot environment data in target
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.

uboot environment config is used by fw_printenv fw_setenv tools.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 30537
2012-02-14 19:07:11 +00:00
John Crispin
7416a5f0aa fix compile error in previous commit
SVN-Revision: 30534
2012-02-14 19:07:05 +00:00
John Crispin
cd1a204365 Support booting the Speedport W502V using BRN-BOOT.
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 30532
2012-02-14 17:48:04 +00:00
Gabor Juhos
02a01a16c7 ramips: extract eeprom for the PCIe wlan module on the RT-N56U
SVN-Revision: 30529
2012-02-14 17:32:45 +00:00
Gabor Juhos
43d1a2c3ab ramips: rt3883: enable PCI on the RT-N56U board
SVN-Revision: 30528
2012-02-14 17:32:44 +00:00
Gabor Juhos
784be92e39 ramips: rt3883: add PCI support
SVN-Revision: 30527
2012-02-14 17:32:42 +00:00
Gabor Juhos
10f00dc48b ramips: rt3883: sync 2.6.39 config
SVN-Revision: 30526
2012-02-14 17:32:41 +00:00
Gabor Juhos
ed79921fe5 ramips: use SoC specific irq.h
SVN-Revision: 30525
2012-02-14 17:32:40 +00:00
John Crispin
0b07769898 fixes irq locking in ethernet driver
SVN-Revision: 30522
2012-02-14 15:05:58 +00:00
John Crispin
55bf39e98c fixes gpio_export patch
SVN-Revision: 30521
2012-02-14 15:05:57 +00:00
John Crispin
976d3eb854 add annex selection support to ltq_dsl package
SVN-Revision: 30518
2012-02-14 15:05:49 +00:00
Gabor Juhos
9a0e17857e ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards
SVN-Revision: 30508
2012-02-13 17:11:58 +00:00
Gabor Juhos
1c57a22aae ar71xx: add model detection for TL-WR842N/ND
SVN-Revision: 30507
2012-02-13 17:11:57 +00:00
Florian Fainelli
e16916480d update to 3.2
SVN-Revision: 30503
2012-02-13 16:05:30 +00:00
Florian Fainelli
7bed2e2225 fix titan gpio register size
SVN-Revision: 30502
2012-02-13 16:05:27 +00:00
Gabor Juhos
8d5dfa75e6 ramips: rt3883: update package list in the default profile
SVN-Revision: 30499
2012-02-13 15:18:05 +00:00
Gabor Juhos
99c019fb0d ramips: add preliminary support for the Asus RT-N56U board
SVN-Revision: 30498
2012-02-13 15:18:04 +00:00
Gabor Juhos
97e641a0e6 ramips: raeth: enable MDIO code for RT3883
SVN-Revision: 30497
2012-02-13 15:18:03 +00:00
Gabor Juhos
e532fa5fd4 ramips: add preliminary support for the RT3662/RT3883 SoCs
SVN-Revision: 30495
2012-02-13 15:17:59 +00:00
Florian Fainelli
4a0dc3a32a add support for 3.2
SVN-Revision: 30492
2012-02-13 12:36:34 +00:00
Hauke Mehrtens
30408f1cc4 brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed.
SVN-Revision: 30488
2012-02-12 22:41:20 +00:00