Commit graph

14674 commits

Author SHA1 Message Date
Alberto Bursi
e13d9cd07f uboot-kirkwood: fix malformed boot configuration
With current uboot default configuration the bootloader will
fail to start the OpenWrt firmware with the following error:
-----
unexpected character 'b' at the end of partition
Error initializing mtdparts!
incorrect device type in ubi
Partition ubi not found!
Error, no UBI device/partition selected!
Wrong Image Format for bootm command
Error occured, error code = 112
-----

If the uboot configuration is examined with printenv
I can see that mdtparts line (on a nsa310) is wrong:
-----
mtdparts=mtdparts=orion_nand:0x0c0000(uboot),
0x80000(uboot_env),0x7ec0000(ubi)bootargs_root=
----

The "bootargs_root=" that was appended to it should not be there.

Fix the issue by adding a \0 line terminator at the end of affected lines,
mimicking what is also done by uboot upstream.

This issue was detected and confirmed on a nsa310, nsa325 and
a pogoplug v4, but it's not hardware-specific, so apply the same fix
to other devices as well.

Note that the issue is with the uboot's integrated boot configuration,
which is not used unless the uboot configuration in flash is unavailable
(erased or corrupted), which happens only on first time installation,
or if the user deletes the uboot configuration when upgrading uboot.
People just upgrading from an older uboot without erasing their previous
uboot configuration stored in flash would not have noticed this issue.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2018-06-27 08:42:54 +02:00
Alberto Bursi
ccd1dc3d20 uboot-kirkwood: fix whitespaces
remove whitespaces from the patches

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2018-06-27 08:42:54 +02:00
Mathias Kresin
52a9edb1bf base-files: add menuconfig option for HOME_URL
Add a menuconfig option to set the HOME_URL exposed in
/usr/lib/os-release independent from the
LEDE_DEVICE_MANUFACTURER_URL.

Fixes: FS#1123

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-06-27 08:40:34 +02:00
Kevin Darbyshire-Bryant
3ce11588f6 wireguard: bump to 0.0.20180625
dfd9827 version: bump snapshot
88729f0 wg-quick: android: prevent outgoing handshake packets from being dropped
1bb9daf compat: more robust ktime backport
68441fb global: use fast boottime instead of normal boottime
d0bd6dc global: use ktime boottime instead of jiffies
18822b8 tools: fix misspelling of strchrnul in comment
0f8718b manpages: eliminate whitespace at the end of the line
590c410 global: fix a few typos
bb76804 simd: add missing header
7e88174 poly1305: give linker the correct constant data section size
fd8dfd3 main: test poly1305 before chacha20poly1305
c754c59 receive: don't toggle bh

Compile-tested-for: ath79 Archer C7 v2
Run-tested-on: ath79 Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-06-26 20:10:54 +01:00
John Crispin
d8981133b2 mac80211: make rtl8xxxu buils again
we only wanted to drop rtl8xxxue support

Signed-off-by: John Crispin <john@phrozen.org>
2018-06-26 16:00:33 +02:00
John Crispin
66c5696cdf mac80211: rtl8xxxu: drop support patches
After a very enlightening but unfortunately far too short exchange with Jes
we mutually agreed to drop the patches. They are unfortunately not ready
yet.

Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: John Crispin <john@phrozen.org>
2018-06-26 15:45:30 +02:00
Hans Dedecker
b7ef10cbf0 odhcpd: update to latest git HEAD
81a281e dhcpv6-ia: fix border assignment size setting
a2ffc59 dhcpv6-ia: fix status code for not on link IAs
5b087a6 dhcpv6-ia: improve error checking in assign_pd()
c9114a1 config: fix wrong assignment
bb8470f dhcpv4: delay forced renew transaction start
62a1b09 dhcpv4: fix DHCP address space logic
d5726ff dhcpv4: improve logging when sending DHCP messages
9484351 odhcpd: call handle_error when socket error can be retrieved
c45e2eb dhcpv6: fix out of bounds write in handle_nested_message()
c2ff5af dhcpv6-ia: log renew messages as well
676eb38 router: fix possible segfault in send_router_advert()
392701f odhcpd: fix passing possible negative parameter
029123b treewide: switch to C-code style comments
6b79748 router: improve error checking
12e21bc netlink: fix incorrect sizeof argument
d7aa414 dhcpv6: improve error checking in dhcpv6_setup_interface()
373495a ubus: fix invalid ipv6-prefix json
79d5e6f ndp: improve error checking
d834ae3 dhcpv4: fix error checking in dhcpv4_setup_interface()
f2aa383 dhcpv4: fix out of bound access in dhcpv4_put
4591b36 dhcpv4: improve error checking in dhcpv4_setup_interface()
4983ee5 odhcpd: fix strncpy bounds

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-06-26 14:48:25 +02:00
Daniel Engberg
1b46bce850 package/utils/e2fsprogs: Update to 1.44.2
Update e2fsprogs to 1.44.2

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-06-26 10:26:05 +02:00
Christian Lamparter
82618062cf ipq40xx: add support for the ZyXEL NBG6617
This patch adds support for ZyXEL NBG6617

Hardware highlights:

SOC:    IPQ4018 / QCA Dakota
CPU:    Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7
DRAM:   256 MiB DDR3L-1600/1866 Nanya NT5CC128M16IP-DI @ 537 MHz
NOR:    32 MiB Macronix MX25L25635F
ETH:    Qualcomm Atheros QCA8075 Gigabit Switch (4 x LAN, 1 x WAN)
USB:    1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC)
WLAN1:  Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2
WLAN2:  Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2
INPUT:  RESET Button, WIFI/Rfkill Togglebutton, WPS Button
LEDS:   Power, WAN, LAN 1-4, WLAN 2.4GHz, WLAN 5GHz, USB, WPS

Serial:
	WARNING: The serial port needs a TTL/RS-232 3.3v level converter!
	The Serial setting is 115200-8-N-1. The 1x4 .1" header comes
	pre-soldered. Pinout:
	  1. 3v3 (Label printed on the PCB), 2. RX, 3. GND, 4. TX

first install / debricking / restore stock:
 0. Have a PC running a tftp-server @ 192.168.1.99/24
 1. connect the PC to any LAN-Ports
 2. put the openwrt...-factory.bin (or V1.00(ABCT.X).bin for stock) file
    into the tftp-server root directory and rename it to just "ras.bin".
 3. power-cycle the router and hold down the the WPS button (for 30sek)
 4. Wait (for a long time - the serial console provides some progress
    reports. The u-boot says it best: "Please be patient".
 5. Once the power LED starts to flashes slowly and the USB + WPS LEDs
    flashes fast at the same time. You have to reboot the device and
    it should then come right up.

Installation via Web-UI:
 0. Connect a PC to the powered-on router. It will assign your PC a
    IP-address via DHCP
 1. Access the Web-UI at 192.168.1.1 (Default Passwort: 1234)
 2. Go to the "Expert Mode"
 3. Under "Maintenance", select "Firmware-Upgrade"
 4. Upload the OpenWRT factory image
 5. Wait for the Device to finish.
    It will reboot into OpenWRT without any additional actions needed.

To open the ZyXEL NBG6617:
 0. remove the four rubber feet glued on the backside
 1. remove the four philips screws and pry open the top cover
    (by applying force between the plastic top housing from the
    backside/lan-port side)

Access the real u-boot shell:
ZyXEL uses a proprietary loader/shell on top of u-boot: "ZyXEL zloader v2.02"
When the device is starting up, the user can enter the the loader shell
by simply pressing a key within the 3 seconds once the following string
appears on the serial console:

|   Hit any key to stop autoboot:  3

The user is then dropped to a locked shell.

|NBG6617> HELP
|ATEN    x[,y]     set BootExtension Debug Flag (y=password)
|ATSE    x         show the seed of password generator
|ATSH              dump manufacturer related data in ROM
|ATRT    [x,y,z,u] RAM read/write test (x=level, y=start addr, z=end addr, u=iterations)
|ATGO              boot up whole system
|ATUR    x         upgrade RAS image (filename)
|NBG6617>

In order to escape/unlock a password challenge has to be passed.
Note: the value is dynamic! you have to calculate your own!

First use ATSE $MODELNAME (MODELNAME is the hostname in u-boot env)
to get the challange value/seed.

|NBG6617> ATSE NBG6617
|012345678901

This seed/value can be converted to the password with the help of this
bash script (Thanks to http://www.adslayuda.com/Zyxel650-9.html authors):

- tool.sh -
ror32() {
  echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) ))
}
v="0x$1"
a="0x${v:2:6}"
b=$(( $a + 0x10F0A563))
c=$(( 0x${v:12:14} & 7 ))
p=$(( $(ror32 $b $c) ^ $a ))
printf "ATEN 1,%X\n" $p
- end of tool.sh -

|# bash ./tool.sh 012345678901
|
|ATEN 1,879C711

copy and paste the result into the shell to unlock zloader.

|NBG6617> ATEN 1,0046B0017430

If the entered code was correct the shell will change to
use the ATGU command to enter the real u-boot shell.

|NBG6617> ATGU
|NBG6617#

Co-authored-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
2018-06-26 08:57:26 +02:00
Philip Prindeville
d375d5fafe iperf3: update to 3.6
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2018-06-26 08:57:25 +02:00
Alin Nastac
ab07ae2f27 netfilter: add bpf match support
Add xt_bpf modules to {kmod-ipt,iptables-mod}-filter.

Match using Linux Socket Filter. Expects a BPF program in decimal
format. This is the format generated by the nfbpf_compile utility.

Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
2018-06-26 08:57:25 +02:00
Stijn Tintel
34e22653ac mac80211: enable ath10k LED support by default
Commit 61d57a2f88 adds ath10k LED
support, but doesn't add an option to actually enable it.

After enabling this option, a LED named ath10k-phy0 appears in sysfs,
and a trigger can be assigned to it. Since 60deb3cdef the default set
trigger is the tpt one.

Enable it by default, as most devices using ath10k chips shouldn't be
severely space-constrained. There are likely many devices that can
benefit from having it enabled, like my testing device.

Before:
   text    data     bss     dec     hex filename
 245311    8899      16  254226   3e112 ath10k_core.ko

After:
   text    data     bss     dec     hex filename
 245979    8899      16  254894   3e3ae ath10k_core.ko

Tested on a D-Link DAP-2695-A1 (ar71xx).

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-06-25 22:00:05 +02:00
Mathias Kresin
60deb3cdef mac80211: ath10k: use tpt LED trigger by default
Use the tpt LED trigger for each created phy led. Ths way LEDs attached
to the ath10k GPIO pins are indicating the phy status and blink on
traffic.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-06-25 20:52:18 +02:00
Yousong Zhou
c4aadbdaf6 dropbear: let opkg manage symlinks of ssh, scp
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-06-25 15:21:24 +08:00
John Crispin
ebe1216c7c iptables: set nonshared flag
this makes sure that offloading support is properly included for v4.14 targets.

Signed-off-by: John Crispin <john@phrozen.org>
2018-06-22 11:46:21 +02:00
John Crispin
cac1a4be66 mac80211: drop 355-ath9k-limit-retries-for-powersave-response-frames.patch
several people reported this bug to be causing drop out issues

Signed-off-by: John Crispin <john@phrozen.org>
2018-06-22 09:43:56 +02:00
Ansuel Smith
134e832814 mac80211: ath10k fix vht160 firmware crash
When the 160mhz width is selected the ath10k firmware crash. This fix this problem.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2018-06-22 09:31:32 +02:00
Ansuel Smith
61d57a2f88 mac80211: ath10k add leds support
This adds support for leds handled by the wireless chipset.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2018-06-22 09:31:32 +02:00
David Thornley
cb262b0939 wwan: Add support for Gemalto Cinterion cellular modules
Includes specific support for PH8(1e2d-0053) / ELS61(1e2d-005b) modules.

Note for ELS61, the serial driver changes from serial option(ttyUSB) to usb-cdc (ttyACM).

Two additional fixes in this commit resolve issues with ttyACM devices: -

* wwan.sh - sys-fs has a subdirectory indirection (*/tty/ttyACMx) which was not handled properly
* wwan.usb - dependent scripts were not included, so this never actually called proto_set_available for example (and relied on inadvertent call for ttyUSB case)

Signed-off-by: David Thornley <david.thornley@touchstargroup.com>
2018-06-22 09:31:32 +02:00
Hans Dedecker
b8bdeace39 busybox: rename udhcpc-remove-code-which-requires-server-ID-to-be-on patch
Move udhcpc-remove-code-which-requires-server-ID-to-be-on patch from 500
to 400

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-06-21 22:48:23 +02:00
Hans Dedecker
c6e50075f2 busybox: udhcpc: replace udhcpc_no_msg_dontroute patch by upstream fix
Replace 204-udhcpc_no_msg_dontroute patch by the upstream busybox fix
which removes the code which requires the server ID to be on local
network

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-06-21 22:33:35 +02:00
Stijn Tintel
f9a42ae2d7 kernel: define THERMAL_EMERGENCY_POWEROFF_DELAY_MS
Enabling CONFIG_ATH10K_THERMAL on targets that don't have CONFIG_THERMAL
enabled in their kernel config causes build to fail due to missing
symbol THERMAL_EMERGENCY_POWEROFF_DELAY_MS. Add it to kmod-thermal.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-06-21 20:02:22 +03:00
Daniel Golle
a704a2c06f ltq-vdsl-fw: fix ltq-vdsl-vr9-vectoring-fw-installer package install
The package is not being generated otherwise, which is fatal because
it is part of the subtargets default package set...

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-21 12:00:12 +02:00
Felix Fietkau
4fb27cc9d8 mt76: update to the latest version
1d4ca10 mt76x2: track rssi for gain adjustment per station

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-06-21 11:19:05 +02:00
Kevin Darbyshire-Bryant
3b11b225b3 wireguard: bump to 0.0.20180620
0bc4230 version: bump snapshot
ed04799 poly1305: add missing string.h header
cbd4e34 compat: use stabler lkml links
caa718c ratelimiter: do not allow concurrent init and uninit
894ddae ratelimiter: mitigate reference underflow
0a8a62c receive: drop handshake packets if rng is not initialized
cad9e52 noise: wait for crng before taking locks
83c0690 netlink: maintain static_identity lock over entire private key update
0913f1c noise: take locks for ss precomputation
073f31a qemu: bump default kernel
bec4c48 wg-quick: android: don't forget to free compiled regexes
7ce2ef3 wg-quick: android: disable roaming to v6 networks when v4 is specified
9132be4 dns-hatchet: apply resolv.conf's selinux context to new resolv.conf
41a5747 simd: no need to restore fpu state when no preemption
6d7f0b0 simd: encapsulate fpu amortization into nice functions
f8b57d5 queueing: re-enable preemption periodically to lower latency
b7b193f queueing: remove useless spinlocks on sc
5bb62fe tools: getentropy requires 10.12
4e9f120 chacha20poly1305: use slow crypto on -rt kernels on arm too

Compiled-for: ar71xx, lantiq
Run-tested-on: ar71xx Archer C7 v2 & lantiq HH5a

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-06-20 22:10:33 +02:00
Hans Dedecker
a9222e0328 odhcp6c: update to latest git HEAD
b99c1f6 odhcp6c: remove len check in option parsing handle

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-06-20 15:42:22 +02:00
Robert Marko
4bb2532ec1 ethtool: Update to 4.17
Tested on 8devices Jalapeno(ipq40xx)
Introduces following changes
* Fix: In ethtool.8, remove superfluous and incorrect \
* Fix: fix uninitialized return value
* Fix: fix RING_VF assignment
* Fix: remove unused global variable
* Fix: several fixes in do_gregs()
* Fix: correctly free hkey when get_stringset() fails
* Fix: remove unreachable code
* Fix: fix stack clash in do_get_phy_tunable and do_set_phy_tunable
* Feature: Add register dump support for MICROCHIP LAN78xx

Signed-off-by: Robert Marko <robimarko@gmail.com>
2018-06-20 15:36:02 +02:00
Daniel Golle
3d20bee2cd ltq-vdsl-fw: add meaningful version information
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-20 14:39:22 +02:00
Hans Dedecker
0e84393ee2 dnsmasq: fix dnsmasq startup issue
Commit ecd954d530 installs specific interface triggers which rewrites the dnsmasq config
file and restarts dnsmasq if the network interface becomes active for which a trigger
has been installed.
In case no dhcp sections are specified or ignore is set to 1 dnsmasq will not be started
at startup which breaks DNS resolving.
Fix this by ditching the BOOT check in start_service and always start dnsmasq at startup.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-06-20 14:07:19 +02:00
Daniel Golle
512c57e7f3 ltq-vdsl-fw: add nonshared flag
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-19 17:57:06 +02:00
Kabuli Chana
0845a34666 mwlwifi: update to version 10.3.8.0-20180615
fix mcs rate for HT
support 88W8997
protect rxringdone

Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
2018-06-19 14:32:47 +02:00
Hauke Mehrtens
d661a5d754 kernel/modules: kmod-chaoskey: Add missing dependency
This new package was missing the dependency to kmod-random-core which
caused some build errors.

Fixes: 163ab9135a ("kernel/modules: add chaoskey module, hardware TRNG")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-06-18 22:51:33 +02:00
Magnus Kroken
ccc728a0e2 busybox: update to 1.28.4
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2018-06-18 22:05:30 +02:00
Kevin Darbyshire-Bryant
83f31b7947 ltq_atm: burn ifx_atm_alloc_tx with fire
Drop code that was never used.

Tested on: BT HomeHub 5a

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-06-18 21:47:05 +02:00
Hannu Nyman
163ab9135a kernel/modules: add chaoskey module, hardware TRNG
Package the driver for Chaoskey, a USB dongle that provides a
True Random Number Generator (TRNG) and feeds entropy to kernel.

Chaoskey driver is included the upstream Linux sources, so
only packaging it is needed.

Run-tested with ipq806x/R7800 and mvebu/WRT3200ACM.

(Requires CONFIG_HW_RANDOM kernel option.)

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2018-06-18 20:29:38 +02:00
Daniel Engberg
5297a759ae mbedtls: Cosmetic cleanups
This is more of a cosmetic change and a reminder that the CMake script hardcodes -O2.
Source:
https://github.com/ARMmbed/mbedtls/blob/mbedtls-2.7/CMakeLists.txt#L73
https://github.com/ARMmbed/mbedtls/blob/master/CMakeLists.txt#L97

Remove the release type option as it's already provided by the toolchain.
Source:
https://github.com/openwrt/openwrt/blob/master/include/cmake.mk#L50

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2018-06-18 20:28:20 +02:00
Daniel Golle
ff0f3522b7 uboot-oxnas: fix typo accidentally committed during oxnas reboot
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-18 18:55:19 +02:00
Paul Spooren
cbf69fb2ad cron: add procd listeners for crontabs
Add procd file listeners to check files in `/etc/crontabs/`.

Also unified a bit the function style.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2018-06-18 18:21:20 +02:00
Rosy Song
1ee98fdef3 nftables: bump to version 0.9.0
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2018-06-18 18:21:20 +02:00
Rosy Song
9d6a0352e7 libnftnl: bump to version 1.1.1
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2018-06-18 18:21:20 +02:00
Magnus Frühling
4b280ad91a ipq40xx: add support for ZyXEL WRE6606
Specifications:
SOC:	Qualcomm IPQ4018 (DAKOTA) ARM Quad-Core
RAM:	128 MB Nanya NT5CC64M16GP-DI
FLASH:	16 MiB Macronix MX25L12845EMI-12G
ETH:	Qualcomm QCA8072
WLAN1:  Qualcomm Atheros QCA4018 2.4GHz 802.11b/g/n 2x2
WLAN2:  Qualcomm Atheros QCA4018 5GHz 802.11n/ac W2 2x2
INPUT:  WPS, Mode-toggle-switch
LED:	Power, WLAN 2.4GHz, WLAN 5GHz, LAN, WPS
        (LAN not controllable by software)
        (WLAN each green / red)
SERIAL:	Header next to eth-phy.
        VCC, TX, GND, RX (Square hole is VCC)
        The Serial setting is 115200-8-N-1.

Tested and working:
 - Ethernet (Correct MAC-address)
 - 2.4 GHz WiFi (Correct MAC-address)
 - 5 GHz WiFi (Correct MAC-address)
 - Factory installation from tftp
 - OpenWRT sysupgrade
 - LEDs
 - WPS Button

Not Working:
 - Mode-toggle-switch

Install via TFTP:

Connect to the devices serial. Hit Enter-Key in bootloader to stop
autobooting. Command `tftpboot` will pull an initramfs image named
`C0A86302.img` from a tftp server at `192.168.99.08/24`.
After successfull transfer, boot the image with `bootm`.

To persistently write the firmware, flash an openwrt sysupgrade image
from inside the initramfs, for example transfer
via `scp <sysupgrade> root@192.168.1.1:/tmp` and flash on the device
with `sysupgrade -n /tmp/<sysupgrade>`.

append-cmdline patch taken from chunkeeys work on the NBG6617.

Signed-off-by: Magnus Frühling <skorpy@frankfurt.ccc.de>
Co-authored-by: David Bauer <mail@david-bauer.net>
Co-authored-by: Christian Lamparter <chunkeey@googlemail.com>
2018-06-18 18:21:20 +02:00
Mirko Parthey
c84ef1f188 iptables: increment PKG_RELEASE to force update
While support for the FLOWOFFLOAD target is available in the firmware
images, it is still missing in some of the binary packages on
downloads.openwrt.org, e.g. for the mipsel_mips32 architecture.

Increment PKG_RELEASE to force an update of these packages.
Also adjust the package description to include the FLOWOFFLOAD target.

Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
2018-06-18 15:27:57 +02:00
Felix Fietkau
7271eacb72 mt76: update to the latest version
072fdac mt76x2: mac: consider multicast/broadcast frames in ewma rssi estimation
f450659 mt76x2: improve gain adjustment in noisy environments

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-06-18 12:36:04 +02:00
Rafał Miłecki
c446e38c86 mac80211: backport brcmfmac changes from kernel 4.18
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-06-18 07:41:40 +02:00
Rafał Miłecki
7e8eb7f309 mac80211: backport brcmfmac firmware & clm_blob loading rework
It backports remaining brcmfmac changes from 4.17.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-06-18 07:41:40 +02:00
Hauke Mehrtens
9a26a9e8b9 uboot-sunxi: update Orange Pi R1 and Zero Plus
The device tree files are now matching the kernel 4.17 and this will be
send also for integration into mainline U-Boot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-06-18 07:10:20 +02:00
Hauke Mehrtens
f2135e7811 uboot-sunxi: update to version 2018.05
This patch 220-add-sunxi50i-nanopi-neo-plus2.patch was merged upstream.
The u-boot-sunxi-with-spl.bin is now also created for the ARM64 sunxi
boards by U-Boot itself, no need to do it manually any more.

This was tested on a H2+ Orange Pi R1 and a H5 Orange Pi Zero Plus.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-06-18 07:10:20 +02:00
Hauke Mehrtens
7afe1caf70 arm-trusted-firmware-sunxi: update to version from 2018-02-10
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-06-18 07:10:20 +02:00
Sven Roederer
2314c2c6f2 base-files: fix links in banner.failsafe
Update the link to the current section in the documentaion wiki.
This fixes https://github.com/openwrt/packages/issues/6282

Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
2018-06-18 07:10:15 +02:00
Rafał Miłecki
5b2e20807d base-files: exit if mtd write command fails during sysupgrade
It avoids confusing situations like:
> Could not get image magic
> Image check failed.
> Upgrade completed
> Rebooting system...

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-06-18 06:37:28 +02:00