KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
23140 commits 3 branches 0 tags 154 MiB
Commit graph

608 commits

Author SHA1 Message Date
Jonas Gorski
e19ed52fd1 bcm63xx: add a fixup for ath9k devices 
SVN-Revision: 31880
 2012-05-27 13:22:37 +00:00
Jonas Gorski
e34018cc9e bcm63xx: add support for the HSSPI controller 
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.

SVN-Revision: 31879
 2012-05-27 13:22:33 +00:00
Jonas Gorski
099d5eec06 bcm63xx: add preliminary support for bcm6328 
SVN-Revision: 31878
 2012-05-27 13:22:29 +00:00
Jonas Gorski
7dbb132c88 bcm63xx: add flash type detection 
SVN-Revision: 31877
 2012-05-27 13:22:25 +00:00
Jonas Gorski
b0ffeb0021 bcm63xx: pad Speedport W303 V images to 4 MiB 
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.

SVN-Revision: 31876
 2012-05-27 13:22:22 +00:00
Jonas Gorski
226b030e44 bcm63xx: add a default switch configuration for DSL-274XB 
SVN-Revision: 31874
 2012-05-27 13:22:17 +00:00
Jonas Gorski
db1ff5c6fa bcm63xx: setup network config through uci-defaults 
SVN-Revision: 31873
 2012-05-27 13:22:14 +00:00
Jonas Gorski
72b4fdecc9 bcm63xx: move the board name workaround to /lib/brcm63xx.sh 
SVN-Revision: 31872
 2012-05-27 13:22:11 +00:00
Jonas Gorski
dd37687de0 bcm63xx: use the exact board id as board identification string 
No need to keep the bcm63xx/ at the start or the chipid info at the end.

SVN-Revision: 31871
 2012-05-27 13:22:08 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7 
SVN-Revision: 31848
 2012-05-23 21:05:32 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
 2012-05-15 10:58:52 +00:00
Gabor Juhos
b472e5d12e kernel: update linux 3.3 to 3.3.6 
SVN-Revision: 31709
 2012-05-14 09:18:32 +00:00
Gabor Juhos
34018a630f kernel: update linux 3.3 to 3.3.5 
SVN-Revision: 31645
 2012-05-07 20:11:43 +00:00
Jonas Gorski
b218b15709 bcm63xx: fix a race between PCI bus scan and fallback sprom registration 
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.

Fixes #11384.

SVN-Revision: 31638
 2012-05-06 21:25:34 +00:00
Florian Fainelli
5d9b44d110 use a define for the poll and debounce interval 
SVN-Revision: 31550
 2012-05-02 15:40:26 +00:00
Gabor Juhos
cbfce53831 kernel: update linux 3.3 to 3.3.4 
SVN-Revision: 31541
 2012-04-30 08:38:11 +00:00
Florian Fainelli
e047cf1899 switch to gpio-keys-polled 
SVN-Revision: 31491
 2012-04-27 16:44:48 +00:00
Jonas Gorski
8a38c62c07 bcm63xx: drop linux 3.2 support 
SVN-Revision: 31464
 2012-04-24 11:49:27 +00:00
Jonas Gorski
77219290e1 bcm63xx: drop linux 3.0 support 
SVN-Revision: 31463
 2012-04-24 11:49:24 +00:00
Jonas Gorski
49de6c1714 bcm63xx: switch kernel to 3.3 
SVN-Revision: 31462
 2012-04-24 11:49:19 +00:00
Jonas Gorski
f7df1eafc4 bcm63xx: enable bcm6368 for linux 3.3 and build images 
Only build bcm6368 images when building for linux 3.3.

SVN-Revision: 31133
 2012-03-28 20:42:37 +00:00
Jonas Gorski
c7ae2fccb6 bcm63xx: add initial support for bcm6368 boards 
SVN-Revision: 31132
 2012-03-28 20:42:34 +00:00
Jonas Gorski
68f268a5eb bcm63xx: add driver for the internal hw trng on bcm6368 
SVN-Revision: 31131
 2012-03-28 20:42:30 +00:00
Jonas Gorski
78fb818f7c bcm63xx: replace SPI driver with latest upstream version 
SVN-Revision: 31130
 2012-03-28 20:42:25 +00:00
Jonas Gorski
a2adca6ee9 bcm63xx: add ethernet support for bcm6368 
Add basic support for the internal ethernet switch on bcm6368. It behaves
as a dumb switch for now, but allows basic connectivity.

Also drop the ethernet patch for bcm6345 for now, it needs rework.

SVN-Revision: 31129
 2012-03-28 20:42:20 +00:00
Jonas Gorski
0876972850 bcm63xx: add missing bits from extirq support 
Add missing external IRQ code parts for older chips in the new code.

SVN-Revision: 31128
 2012-03-28 20:42:15 +00:00
Jonas Gorski
44d546290a bcm63xx: reorder patches 
Reorder patches for a clearer distinction between the purposes of
the different patches.

SVN-Revision: 31127
 2012-03-28 20:42:09 +00:00
Felix Fietkau
db6e326c56 targets: replace madwifi in profiles with ath5k, madwifi is unmaintained 
SVN-Revision: 31015
 2012-03-19 09:58:13 +00:00
Florian Fainelli
07486c4d96 remove udc patch since it is unused 
SVN-Revision: 30920
 2012-03-13 14:06:44 +00:00
Florian Fainelli
1029786936 remove 3.1 support 
SVN-Revision: 30823
 2012-03-05 16:50:42 +00:00
Florian Fainelli
75b5f4a6b4 rename 96348GW-1{0,1}-gen to 96348GW-1{0,1}-generic 
SVN-Revision: 30822
 2012-03-05 14:49:34 +00:00
Florian Fainelli
c327915156 generate generic images for BCM96358VW and BCM96358VW2 (#10666) 
SVN-Revision: 30821
 2012-03-05 14:49:31 +00:00
Florian Fainelli
ca1e59660e wire bcm96348gw-10 reset button (#10854) 
SVN-Revision: 30820
 2012-03-05 14:23:45 +00:00
Florian Fainelli
631a035a76 Merge branch 'bcm63xx' 
SVN-Revision: 30819
 2012-03-05 13:29:54 +00:00
Jonas Gorski
778e5d4fa5 brcm63xx: add support for linux 3.3 
SVN-Revision: 30027
 2012-02-04 10:17:27 +00:00
Jonas Gorski
e67f4477bb kernel: update linux 3.0 to 3.0.18 
SVN-Revision: 29965
 2012-01-31 09:43:53 +00:00
Florian Fainelli
882eddbf92 build 96348R images 
SVN-Revision: 29960
 2012-01-30 21:12:32 +00:00
Florian Fainelli
0700644b16 remove support for 2.6.39 
SVN-Revision: 29959
 2012-01-30 21:12:28 +00:00
Florian Fainelli
038fc8eac3 bump to 3.0.17 
SVN-Revision: 29958
 2012-01-30 21:12:25 +00:00
Jonas Gorski
3883e71097 brcm63xx: add support for linux 3.2 
SVN-Revision: 29731
 2012-01-13 14:59:50 +00:00
Jonas Gorski
c560444a58 kernel: update linux 3.1 to 3.1.9 
SVN-Revision: 29726
 2012-01-13 14:38:28 +00:00
Jonas Gorski
e49d3e1d5b kernel: update linux 3.0 to 3.0.17 
SVN-Revision: 29725
 2012-01-13 14:10:44 +00:00
Daniel Dickinson
034b7f0ef5 Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics. 
SVN-Revision: 29712
 2012-01-11 13:47:48 +00:00
Florian Fainelli
718907b661 don't package gpioctl by default 
SVN-Revision: 29288
 2011-11-21 16:36:39 +00:00
Jo-Philipp Wich
b5739aabd9 fix D-Link DSL-2650U image generation 
SVN-Revision: 29266
 2011-11-19 21:34:51 +00:00
Jonas Gorski
8bac0df4ae linux: update 3.0 to 3.0.9 
SVN-Revision: 29264
 2011-11-19 18:39:12 +00:00
Florian Fainelli
ae90aa4efd build images for D-Link DSL-2650U (#9003) 
SVN-Revision: 29238
 2011-11-18 10:37:03 +00:00
Florian Fainelli
7f787707de build images for Pirelli A226M (#10409) 
SVN-Revision: 29045
 2011-11-13 19:19:22 +00:00
Florian Fainelli
5dc2098448 register uart0 on DWV-S0 boards (#10409) 
SVN-Revision: 29044
 2011-11-13 19:19:18 +00:00
Florian Fainelli
717a4391d7 rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch 
SVN-Revision: 29041
 2011-11-13 19:19:05 +00:00
Jonas Gorski
d8acb75009 linux: update 3.1 to 3.1.1 
SVN-Revision: 29007
 2011-11-13 10:48:05 +00:00
Jo-Philipp Wich
a9e64493d8 target: globally disable BSD process accounting 
SVN-Revision: 28584
 2011-10-25 16:18:36 +00:00
Hauke Mehrtens
09b1073f9b kernel: update kernel to version 2.6.39.4 
SVN-Revision: 28022
 2011-08-16 22:04:10 +00:00
Florian Fainelli
b59ab7d13b fix ehci build on 3.0+ 
SVN-Revision: 27946
 2011-08-10 11:37:25 +00:00
Florian Fainelli
0e40c19b45 add ignore_oc in struct ehci_hcd 
SVN-Revision: 27945
 2011-08-10 11:37:21 +00:00
Jonas Gorski
6b5f483efa bcm63xx: add support for linux 3.1-rc1 
SVN-Revision: 27941
 2011-08-09 12:19:49 +00:00
Florian Fainelli
c37a9544bf add support for BCM6345 Ethernet DMA engine 
SVN-Revision: 27881
 2011-08-02 18:55:55 +00:00
Florian Fainelli
11c4128770 improve BCM6345 support 
- runtime detect the amount of memory available
- define EBI_BASE as MPI_BASE to get rid of chip-select specific hacks
- fix GPIO control

SVN-Revision: 27880
 2011-08-02 18:55:46 +00:00
Jonas Gorski
4e6c93bef1 bcm63xx: Fix SPI commands and register offsets for BCM6348 
In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that.
It also fixes some spi commands for all bcm63xx.

Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk>

SVN-Revision: 27774
 2011-07-25 19:52:47 +00:00
Florian Fainelli
9c7294f7c7 add ehci support to DWV-S0 board (#9059) 
SVN-Revision: 27622
 2011-07-16 08:39:04 +00:00
Florian Fainelli
930485561c fix GEN_SPI_RSET_BASE macro (#9697) 
SVN-Revision: 27604
 2011-07-13 09:33:11 +00:00
Florian Fainelli
00ad56b73e move board_HW553 inside the ifdef ..BCM6358 .. endif block 
SVN-Revision: 27484
 2011-07-06 10:00:39 +00:00
Daniel Dickinson
1141165bb9 Makefile: fixed inclusion of kmod-leds-gpio as a module (breaks Image Generator) - the module is built into the kernel. 
SVN-Revision: 27471
 2011-07-06 06:35:24 +00:00
Daniel Dickinson
9dc72505a2 profiles: GW6X00: fixed inclusion of both wl and wlc wireless tools...should be just wlc 
SVN-Revision: 27470
 2011-07-06 06:35:22 +00:00
Florian Fainelli
7c3bbe150a hw553: fix missing has_uart0 in board definition (#9533) 
SVN-Revision: 27448
 2011-07-04 15:04:58 +00:00
Hauke Mehrtens
c5821c1a3a kernel: update kernel to 2.6.39.2 
SVN-Revision: 27298
 2011-06-28 19:30:58 +00:00
Hauke Mehrtens
ca979845cc kernel: update ssb and bcma to linux-next next-20110627 
SVN-Revision: 27295
 2011-06-27 21:28:40 +00:00
Florian Fainelli
3f40c0f7df remove gpiodev, prefer sysfs gpio 
SVN-Revision: 27284
 2011-06-25 19:26:17 +00:00
Florian Fainelli
f6e4eb15bc register SSB sprom after ethernet devices 
In case the MAC address pool is not big enough to also register a SSB SPROM
prefer registering the Ethernet devices.

SVN-Revision: 27258
 2011-06-22 12:32:03 +00:00
Florian Fainelli
5a76c6bdd7 fix tab damage in 141-led_count.patch 
SVN-Revision: 27254
 2011-06-21 20:52:58 +00:00
Florian Fainelli
3f0f8d9c87 fix and make usable kmod-pcmcia-rsrc 
This module is also needed for e.g: kmod-bcm63xx-pcmcia

SVN-Revision: 27253
 2011-06-21 20:52:53 +00:00
Florian Fainelli
9bdf6abb9d use macros to generate SPI registers table and switches 
SVN-Revision: 27246
 2011-06-21 10:05:51 +00:00
Florian Fainelli
ab74628c10 dev-spi.c checks for running CPU, not board code 
SVN-Revision: 27236
 2011-06-19 20:46:00 +00:00
Florian Fainelli
4dd4cbeb43 fixup patches after r27234 
SVN-Revision: 27235
 2011-06-19 20:28:38 +00:00
Florian Fainelli
7819b530da remove accidental bcm6345 related patches 
SVN-Revision: 27234
 2011-06-19 20:16:59 +00:00
Florian Fainelli
12db3df666 remove support for 2.6.37 and 2.6.38 
SVN-Revision: 27233
 2011-06-19 20:14:22 +00:00
Florian Fainelli
6bb0a608dc switch to 2.6.39 
SVN-Revision: 27232
 2011-06-19 20:12:45 +00:00
Florian Fainelli
426dccd019 bcm63xx: Add support for Linux 3.0-rc3 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27192
 2011-06-16 14:34:40 +00:00
Florian Fainelli
016e8dee34 bcm63xx: Add support for 2.6.39 
Add support for Kernel 2.6.39. Boots fine on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27019
 2011-05-27 09:54:52 +00:00
Florian Fainelli
590c82cec1 bcm63xx: Add support for 2.6.38 
Add support for Kernel 2.6.38, based on 2.6.38.6. Boots fine on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 27018
 2011-05-27 09:54:48 +00:00
Florian Fainelli
68cb138154 fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch 
SVN-Revision: 27014
 2011-05-26 13:53:00 +00:00
Florian Fainelli
762885081a renumber patches accordingly 
SVN-Revision: 27013
 2011-05-26 13:52:56 +00:00
Florian Fainelli
2785e3fc12 renumber board patches 
SVN-Revision: 27012
 2011-05-26 12:09:15 +00:00
Florian Fainelli
16dfe8b4d1 add support for BT Voyager 2110 (#8810) 
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>

SVN-Revision: 26959
 2011-05-20 10:06:25 +00:00
Florian Fainelli
6c8387fe15 add support for DSL-2640B rev B2 
Signed-off-by: Adrian Feliks <mexit@o2.pl>

SVN-Revision: 26958
 2011-05-20 10:06:22 +00:00
Florian Fainelli
031ea08ef0 refresh patches 
SVN-Revision: 26957
 2011-05-20 10:06:18 +00:00
Florian Fainelli
3e83f60a66 add support for D-Link DVA-G3810BN/TL 
This patch adds support for D-Link's DVA-G3810BN/TL product.

Signed-off-by: Roman Dumycz <roman@secureas.com>

SVN-Revision: 26956
 2011-05-20 10:06:15 +00:00
Florian Fainelli
f0a99c1692 add support for BT Voyager 2500 (#9070) 
SVN-Revision: 26954
 2011-05-20 10:06:07 +00:00
Florian Fainelli
acf0ec224f add support for USR9108 LEDs (#9372) 
SVN-Revision: 26953
 2011-05-20 10:06:04 +00:00
Florian Fainelli
9c8a2d5961 bcm63xx: Add support for the T-Home Speedport W 303V 
Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26878
 2011-05-11 13:34:14 +00:00
Florian Fainelli
7d3b735854 bcm63xx: Update support for the DSL-274xB revision C 
Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.

While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26876
 2011-05-11 13:33:50 +00:00
Florian Fainelli
0fb1c2d537 bcm63xx: Accept any led with power in its name as power led 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26875
 2011-05-11 13:33:45 +00:00
Florian Fainelli
c6af9c23b7 bcm63xx: Decouple Board ID and image name for fixup 
Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26874
 2011-05-11 13:33:41 +00:00
Florian Fainelli
de02a2795b fill maintainer infos for a couple of targets 
SVN-Revision: 26836
 2011-05-06 12:37:36 +00:00
Hauke Mehrtens
fcb1557a3e brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer. 
SVN-Revision: 26829
 2011-05-05 14:05:21 +00:00
Hauke Mehrtens
3dbb8c5088 brcm47xx: add fallback sprom for pci devices without an own sprom. 
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.

This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)

SVN-Revision: 26801
 2011-05-01 20:28:35 +00:00
Felix Fietkau
1fcd26091b brcm63xx: remove patches/configs for 2.6.35 
SVN-Revision: 26709
 2011-04-17 18:39:46 +00:00
Daniel Dickinson
8b18ce6807 Fixed directory error: added ra1320 patches to trunk/target... subdir instead if target.... in trunk branch. 
SVN-Revision: 26699
 2011-04-17 01:15:47 +00:00
Daniel Dickinson
0d722113b9 Generate images for RTA1320_16M-based routers 
SVN-Revision: 26681
 2011-04-15 14:31:36 +00:00
Daniel Dickinson
f83c5938d2 bcm63xx: Move the OpenWrt rootfs length field 
Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.

To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.

Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26680
 2011-04-15 12:18:25 +00:00
Hauke Mehrtens
50c743e79e kernel: Update to version 2.6.37.6 
Thank you Peter Wagner for the patch

SVN-Revision: 26441
 2011-04-03 13:59:07 +00:00
Daniel Dickinson
33b864e899 Updated kernel version to 2.6.37.4. Tested with 6348 and 6358 devices. 
SVN-Revision: 26387
 2011-03-31 06:16:23 +00:00
Florian Fainelli
aa580d336b bcm63xx: Really fix the flash driver in 2.6.37 
Read back the actual rootfs length from the image tag.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 25938
 2011-03-07 16:55:01 +00:00
Florian Fainelli
9dd1454044 fix patches after 2.6.37 update, patch from KanjiMonster 
SVN-Revision: 25810
 2011-03-01 16:02:38 +00:00
Florian Fainelli
94a22b91fc add support for 2.6.37, patches from KanjiMonster 
SVN-Revision: 25629
 2011-02-20 19:59:22 +00:00
Florian Fainelli
8cc16aa14e add support for HW553 bcm6358-based boards (#8844) 
SVN-Revision: 25590
 2011-02-19 15:44:06 +00:00
Florian Fainelli
b7f8e1276d add support for 'MAGIC' bcm6348-based board 
I wrote a patch to add 96348SV board (aka MAGIC) support to trunk.
In my case I've found it in a Telsey "Alice W-Gate" router, fairly common
(in the past) in Italy.

I used the board definition (GPIOs, leds, ...) from the Broadcom GPL-2
relased code (here is a mirror: http://beghiero.myftp.org/sorgenti/boardparms.c )

Thanks to KanjiMonster for the support on the IRC channel.

Signed-off-by: Laurento Frittella <laurento.frittella@gmail.com>

SVN-Revision: 25584
 2011-02-19 12:44:27 +00:00
Florian Fainelli
31709b2c76 update to 2.6.35.11 
SVN-Revision: 25582
 2011-02-19 12:44:16 +00:00
Florian Fainelli
2d3ed6dc2d fix T-Com Speedport W 500V default config 
The device is called SPW500V, not SP500W.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 25431
 2011-02-09 13:09:02 +00:00
Florian Fainelli
e75274de89 fix build of brcm-wl 
The fallback needs to be exported for bcm63xx, too. Runtime tested with a
BCM4322 on a BCM6358.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 25420
 2011-02-08 13:46:12 +00:00
Florian Fainelli
bed53c93d6 give some credits to Tanguy Bouzeloc in the spi driver 
SVN-Revision: 25133
 2011-01-27 02:11:08 +00:00
Florian Fainelli
c6d9ec5173 multiple SPI driver fixes 
- fix platform device registration
- fix chipselect, command register defines, add missing clock
- make slave select proper
- fix multibytes transferts

Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>

SVN-Revision: 24849
 2010-12-29 16:19:59 +00:00
Daniel Dickinson
dc9c1ac1f7 patches-2.6.35: mtd flashmap: Really fixed sparelen and rootfslen. The real rootfslen for OpenWRT images comes from a bigendian uint32_t in reserved1 of the bcm_tag, which is now used to correctly calculate the rootfslen (and thus the sparelen). 
SVN-Revision: 24843
 2010-12-28 08:10:32 +00:00
Daniel Dickinson
5ee2a6c696 patches-2.6.36: Fix flashmap spare length calculation from previous commit (for rootfs and rootfs_data mtd partitions). Apparently the interruption in working on it resulted in an incorrect memory of getting it working. 
SVN-Revision: 24842
 2010-12-28 04:05:04 +00:00
Florian Fainelli
093ebfe217 spi driver: remove bcm_rset usage 
Since bcm636x platform embeds two spi master device,
the attached patch removes static bcm_rset usage, replaced  by
"bs->regs" field for all I/O operation.

Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 24840
 2010-12-28 00:24:50 +00:00
Daniel Dickinson
fc3a1d0ba3 Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size. 
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

SVN-Revision: 24838
 2010-12-26 04:18:13 +00:00
Daniel Dickinson
6ee5411686 base-files: Added uci-defaults script to run mtd fixtrx on firstboot for devices that need it. 
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

SVN-Revision: 24836
 2010-12-26 04:18:04 +00:00
Daniel Dickinson
31f7259e3e mtd flashmap: Switched to calculating the rootfs size rather than depending on being given the size in the imagetag. This is because solving the problem of second boot CRC errors requires changeing the rootfs size in the image to zero. 
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

SVN-Revision: 24834
 2010-12-26 04:17:56 +00:00
Daniel Dickinson
44e22cbd49 Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. 
SVN-Revision: 24442
 2010-12-10 18:59:58 +00:00
Daniel Dickinson
7224337d71 Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are going away. Remove kmod-loop as the need for it has been superseded by block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed. 
SVN-Revision: 24316
 2010-12-08 00:40:31 +00:00
Daniel Dickinson
2a86dcc3d6 Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases. 
SVN-Revision: 24315
 2010-12-08 00:40:28 +00:00
Daniel Dickinson
c6ef9a0720 Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile 
SVN-Revision: 24314
 2010-12-08 00:40:24 +00:00
Daniel Dickinson
f8ed133c0a patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number. 
SVN-Revision: 24310
 2010-12-07 17:32:29 +00:00
Daniel Dickinson
0e839ea40d Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T." 
This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5.

It belongs in generic not brcm63xx.

SVN-Revision: 24308
 2010-12-07 17:02:31 +00:00
Daniel Dickinson
183d628485 patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. Thanks blunoise 
SVN-Revision: 24307
 2010-12-07 16:42:23 +00:00
Daniel Dickinson
8f9b14dafe boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. 
SVN-Revision: 24305
 2010-12-07 15:15:54 +00:00
Daniel Dickinson
3baa168e09 patches: Refreshed patches after led_count 
SVN-Revision: 24304
 2010-12-07 15:15:51 +00:00
Daniel Dickinson
b963cbde33 board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit 
SVN-Revision: 24303
 2010-12-07 15:15:47 +00:00
Daniel Dickinson
e5ca4d81f4 Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. 
SVN-Revision: 24302
 2010-12-07 15:15:41 +00:00
Daniel Dickinson
ad24e14b35 base-files: Added the preinit information for reset button and preinit indication led, and preinit interface 
SVN-Revision: 24276
 2010-12-06 06:46:03 +00:00
Daniel Dickinson
244db5ac6a board definition: Fixed CPVA642 LED definitions 
SVN-Revision: 24275
 2010-12-06 06:45:57 +00:00
Daniel Dickinson
8316194016 board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz 
SVN-Revision: 24274
 2010-12-06 04:31:23 +00:00
Daniel Dickinson
7129521696 base-files: Added network defconfig because board only has one ethernet (4-port switch) 
SVN-Revision: 24273
 2010-12-06 02:01:08 +00:00
Daniel Dickinson
9677b65cb6 image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me. 
SVN-Revision: 24191
 2010-11-28 22:13:00 +00:00
Daniel Dickinson
314bce63e6 bcm63xx: Add support for the T-Com Speedport W 500V. 
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24190
 2010-11-28 22:04:44 +00:00
Daniel Dickinson
3a49f669f2 bcm63xx: Add board id override fixup. 
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.

Also modify the image generation to generate apropriately tagged images.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24189
 2010-11-28 22:04:40 +00:00
Daniel Dickinson
c51d772e62 bcm63xx: Finalize support for DSL-274xB, rev C2. 
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24188
 2010-11-28 22:04:36 +00:00
Daniel Dickinson
8fa9b24a4c bcm63xx: Allow 'colored' power leds. 
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24187
 2010-11-28 22:04:30 +00:00
Daniel Dickinson
fec30c8c80 bcm63xx: Don't hardcode the switch ethernet interface in preinit. 
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24186
 2010-11-28 22:04:26 +00:00
Daniel Dickinson
b1b318750a bcm63xx: Add defconfigs. 
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24185
 2010-11-28 22:04:19 +00:00
Imre Kaloz
ead8ab8403 update to the latest stable kernels 
SVN-Revision: 24136
 2010-11-24 18:50:11 +00:00
Daniel Dickinson
195d1d7446 image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section 
SVN-Revision: 24127
 2010-11-24 11:06:13 +00:00
Daniel Dickinson
0c0c1f017f image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. 
SVN-Revision: 24118
 2010-11-23 20:17:08 +00:00
Daniel Dickinson
049e59a27b Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known). 
SVN-Revision: 24040
 2010-11-19 13:41:54 +00:00
Daniel Dickinson
eadb5c84fa imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). 
SVN-Revision: 24011
 2010-11-16 06:46:53 +00:00
Claudio Mignanti
7583fe8668 Add wps button on alice gate 
SVN-Revision: 23903
 2010-11-06 21:08:44 +00:00
Imre Kaloz
0a5da348d1 update kernels to 2.6.32.25 and 2.6.35.8 
SVN-Revision: 23851
 2010-11-04 09:01:08 +00:00
Florian Fainelli
ffc84cf75c register uart driver on livebox (#8013) 
SVN-Revision: 23653
 2010-10-27 10:02:13 +00:00
Florian Fainelli
7bf5647070 refresh 2.6.35 patches 
SVN-Revision: 23652
 2010-10-27 10:02:08 +00:00
Claudio Mignanti
697d3e7066 Fix nxp_74hc164 driver compile error (builbot) 
SVN-Revision: 23623
 2010-10-24 16:10:41 +00:00