KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
22119 commits 3 branches 0 tags 154 MiB
Commit graph

9020 commits

Author SHA1 Message Date
Florian Fainelli
dd541cbefa add support for Linux 3.6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34156
 2012-11-11 19:26:50 +00:00
Florian Fainelli
f7fcb3c845 split kernel config between generic, au1500 and au1550 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34155
 2012-11-11 19:26:44 +00:00
Florian Fainelli
b363a7e491 add support for Linux 3.6 
SVN-Revision: 34154
 2012-11-11 18:41:09 +00:00
Florian Fainelli
854c504781 move files directory to files-3.3 
SVN-Revision: 34153
 2012-11-11 18:40:48 +00:00
Hauke Mehrtens
cadd36a303 brcm47xx: remove ssb-gige package 
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more.
The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package.

SVN-Revision: 34150
 2012-11-11 17:30:33 +00:00
Florian Fainelli
62c9156af6 generate image for AC49x 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34149
 2012-11-11 16:11:39 +00:00
Florian Fainelli
9c7d221d47 create AC49x subtarget 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34148
 2012-11-11 16:11:34 +00:00
Florian Fainelli
668234c109 create generic subtarget 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34147
 2012-11-11 16:11:29 +00:00
Florian Fainelli
4891549bcd detect AC49x flash partitions 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34146
 2012-11-11 16:11:22 +00:00
Florian Fainelli
feb968d964 support AC49x bootloader environment 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34145
 2012-11-11 16:11:14 +00:00
Florian Fainelli
7d09c61d65 add AudioCodes AC49x platform support to kernel 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34144
 2012-11-11 16:11:09 +00:00
Florian Fainelli
d9b89db380 free memory below kernel offset 
Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that
memory region so it is usable for Linux.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34143
 2012-11-11 16:11:00 +00:00
Jo-Philipp Wich
298a8e2300 x86/generic: don't disable usbfs (#12452) 
SVN-Revision: 34139
 2012-11-10 23:28:58 +00:00
Jonas Gorski
c54fa281b1 bcm63xx: fix compilation with kmod-ohci enabled with 3.6 
Fixes the following error:

drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]

Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34138
 2012-11-10 22:10:47 +00:00
Jonas Gorski
15519bec9c bcm63xx: add two missing usb patches to 3.6 
SVN-Revision: 34137
 2012-11-10 19:59:16 +00:00
Jonas Gorski
06ad6ffe16 bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6 
SVN-Revision: 34136
 2012-11-10 19:59:07 +00:00
Imre Kaloz
f3f3f52259 cns3xxx: clean up pcie patches 
Combine two pcie patches (2nd patch undid the 1st patch) together
and refresh the other affected patches

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 34132
 2012-11-09 21:37:54 +00:00
John Crispin
71ddec8091 add more profiles 
SVN-Revision: 34131
 2012-11-09 19:26:58 +00:00
John Crispin
88e4d93802 a few more dts files (WIP) 
SVN-Revision: 34130
 2012-11-09 19:26:43 +00:00
John Crispin
a30b3066ce add mtd split and atm patch 
SVN-Revision: 34129
 2012-11-09 19:26:30 +00:00
Felix Fietkau
46288bf98e x86: use $(strip) for the at_keyboard check 
SVN-Revision: 34127
 2012-11-09 10:53:36 +00:00
Felix Fietkau
0a9e05fb0e x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell) 
SVN-Revision: 34126
 2012-11-09 10:19:51 +00:00
Gabor Juhos
502661f685 generic: sanitize deps_initramfs list 
If any filename in the intramfs dependency
list contains a colon, that causes a kernel
build error like this:

/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns.  Stop.
make[5]: *** [usr] Error 2

Fix it by removing such filenames from the
deps_initramfs list.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34125
 2012-11-09 09:07:29 +00:00
Luka Perkov
965c190444 cns3xxx: exit from laguna late_initcall if not running on laguna board 
SVN-Revision: 34120
 2012-11-08 11:31:56 +00:00
Imre Kaloz
0da0dc0f2b cns3xxx: add PPS support for laguna 
Many Laguna products have on-board GPS with Pulse-per-second (PPS)
support.  This patch adds kernel support (statically) and adds
the platform data in laguna board support.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 34115
 2012-11-08 05:42:31 +00:00
Imre Kaloz
efcdc21824 fixup symbol selection 
SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU,
ARCH_CNS3XXX already selects MIGHT_HAVE_PCI

SVN-Revision: 34114
 2012-11-08 05:40:34 +00:00
Luka Perkov
4d66b749de cns3xxx: fix coding style in board script 
SVN-Revision: 34113
 2012-11-07 23:12:06 +00:00
John Crispin
6090ddc896 adds fon20n profile 
SVN-Revision: 34112
 2012-11-07 20:26:31 +00:00
John Crispin
3991526989 ramips: use kernel 3.6.6 
## Booting image at 80800000 ...
   Image Name:   MIPS OpenWrt Linux-3.6.6
   Created:      2012-11-06  14:19:54 UTC

 System Control Status = 0x20440000
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3560768 Bytes =  3.4 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32

Starting kernel ...

[    0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=0000c388
[    0.000000] Readback ErrCtl register=0000c388
[    0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:48
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] NET: Registered protocol family 16
[    0.120000] MIPS: machine is Allnet ALL0239-3G
[    0.140000] bio: create slab <bio-0> at 0
[    0.150000] Switching to clocksource MIPS
[    0.160000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    5.490000] msgmni has been set to 52
[    5.500000] io scheduler noop registered
[    5.510000] io scheduler deadline registered (default)
[    5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[    5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    5.560000] physmap platform flash device: 00800000 at bf000000
[    5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[    5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[    5.610000]   Amd/Fujitsu Extended Query version 1.3.
[    5.620000] number of CFI chips: 1
[    5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[    5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[    5.650000] 0x000000000000-0x000000030000 : "u-boot"
[    5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[    5.680000] 0x000000040000-0x000000050000 : "factory"
[    5.690000] 0x000000050000-0x000000130000 : "kernel"
[    5.700000] 0x000000130000-0x000000800000 : "rootfs"
[    5.710000] mtd: partition "rootfs" set to be root filesystem
[    5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[    5.740000] 0x000000050000-0x000000800000 : "firmware"
[    5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[    5.780000] TCP: cubic registered
[    5.780000] NET: Registered protocol family 17
[    5.790000] 8021q: 802.1Q VLAN Support v1.8
[    5.820000] Freeing unused kernel memory: 2676k freed
[    6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -

Please press Enter to activate this console. [   10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[   10.170000] Backport based on wireless-testing.git master-2012-09-07
[   10.180000] compat.git: wireless-testing.git
[   10.210000] cfg80211: Calling CRDA to update world regulatory domain
[   10.230000] cfg80211: World regulatory domain updated:
[   10.240000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.250000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.270000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.280000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.310000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.430000] NET: Registered protocol family 10
[   10.760000] PPP generic driver version 2.4.2
[   10.820000] l2tp_core: L2TP core driver, V2.0
[   10.840000] l2tp_netlink: L2TP netlink interface
[   10.870000] sit: IPv6 over IPv4 tunneling driver
[   10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.060000] NET: Registered protocol family 24
[   11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[   11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.510000] device eth0.1 entered promiscuous mode
[   14.520000] device eth0 entered promiscuous mode
[   14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   14.550000] br-lan: port 1(eth0.1) entered forwarding state
[   14.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33

BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r34079)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/#

SVN-Revision: 34111
 2012-11-07 20:26:21 +00:00
John Crispin
480892226d ramips: add HAVE_CLK to Kconfig on all ramips socs 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34110
 2012-11-07 20:26:04 +00:00
John Crispin
feb31be6af ramips: add linux-3.6 configuration for ramips socs 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/rt288x/config-3.6
 create mode 100644 target/linux/ramips/rt305x/config-3.6
 create mode 100644 target/linux/ramips/rt3883/config-3.6

SVN-Revision: 34109
 2012-11-07 20:25:55 +00:00
John Crispin
ca1fcaed5b ramips: port patches to linux-3.6 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
 create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
 create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
 create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
 create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
 create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
 create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
 create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
 create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
 create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
 create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch

SVN-Revision: 34108
 2012-11-07 20:25:34 +00:00
Jonas Gorski
f2bb7754f5 bcm63xx: Enable endian check support for ath9k pci fixup. 
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34105
 2012-11-07 09:01:03 +00:00
Imre Kaloz
f2b75b517b fixup typos in the compex patch 
SVN-Revision: 34104
 2012-11-07 07:51:24 +00:00
Jonas Gorski
a50d121d8e linux: export bcm963xx_tag.h to userspace 
Export bcm963xx_tag.h so mtd can use it without using kernel includes.

Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
 from original location, refresh patches, use  a more matching patch
 number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 34103
 2012-11-06 15:21:46 +00:00
Luka Perkov
865933a0ec cns3xxx: refresh kernel config file 
SVN-Revision: 34102
 2012-11-06 11:16:43 +00:00
Luka Perkov
9a5c26d4ef cns3xxx: use files directory 
SVN-Revision: 34101
 2012-11-06 11:16:41 +00:00
John Crispin
7404e59bbd add OWRTDTB marker patch 
SVN-Revision: 34100
 2012-11-06 10:39:43 +00:00
John Crispin
3a1851964e add support for arv7525 
SVN-Revision: 34097
 2012-11-06 07:38:24 +00:00
Imre Kaloz
e141cbb0f9 refresh patches 
SVN-Revision: 34095
 2012-11-06 05:45:12 +00:00
Imre Kaloz
1a9dfd566e add default packages 
SVN-Revision: 34094
 2012-11-06 05:39:08 +00:00
Jonas Gorski
0722fd9c63 linux: generic: fix split_squashfs for 3.6 
_read expects the retlen to be initialized to zero, which the mtd_read
helper does. So fix it by using mtd_read instead of calling _read directly.

SVN-Revision: 34093
 2012-11-06 00:48:21 +00:00
Jonas Gorski
5bc7d81a20 bcm63xx: fix SPW303V images 
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.

SVN-Revision: 34091
 2012-11-05 22:50:29 +00:00
Gabor Juhos
e92da5e7ae ar71xx: nuke ath79_set_usb_power_gpio helper 
It is no longer used.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34088
 2012-11-05 13:23:28 +00:00
Gabor Juhos
f2528b1792 ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34087
 2012-11-05 13:23:27 +00:00
Gabor Juhos
e8669729bc kernel: update linux 3.6 to 3.6.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34086
 2012-11-05 13:22:09 +00:00
Imre Kaloz
d822ecfdf8 use the mainline machname for the compex boards 
SVN-Revision: 34083
 2012-11-05 11:38:23 +00:00
Gabor Juhos
a0dd47bbed ramips: enable USB power on the DIR-645 
Closes #12422.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34082
 2012-11-05 11:04:45 +00:00
Gabor Juhos
5e43b934fd linux/3.3: backport an upstream GPIO patch 
The backported patch introduces new flags to
automatically export GPIOs when using the
convenience unctions gpio_request_one() or
gpio_request_array().

This will be used by ar71xx/ramips platforms.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34081
 2012-11-05 11:04:43 +00:00
Gabor Juhos
829aaedcbf ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34078
 2012-11-05 06:58:53 +00:00