Commit graph

14 commits

Author SHA1 Message Date
John Crispin
dc92917409 image / basefiles: make console password configurable
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-18 21:53:07 +02:00
Christian Lamparter
3339f41d26 brcm2708: implement sysupgrade image check
Implement a crude but functioning sysupgrade image check for the
Raspberry Pi. The code only checks if the master boot record boot
signature (0x55aa) is present in the first 512-bytes at the correct
location. This can prevent the odd bricking of a system when flashing
the wrong file.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
2016-04-07 18:26:51 +02:00
John Crispin
993989880a brcm2708: add Raspberry Pi 3 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48967
2016-03-08 18:11:55 +00:00
Felix Fietkau
edb3c1780c brcm2708: fix RPi model B plus support
Not sure if B+ is used or not (mine has B Plus) so leave both

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 48311
2016-01-18 12:42:03 +00:00
Jo-Philipp Wich
67e1c87012 all: drop old uci-defaults.sh
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
Jo-Philipp Wich
527ec2af59 all: remove dummy ucidef_set_interface_loopback() from board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47744
2015-12-03 23:13:00 +00:00
John Crispin
cd9d0ee0d0 brcm2708: add device detection and use it for network, leds and preinit
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47572
2015-11-22 08:04:37 +00:00
John Crispin
7ce3e1fd3c brcm2708: keep boot partition mounted to allow users to change config.txt
This way it's easier to configure device tree overlays, customize other
parameters...

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47126
2015-10-05 10:27:49 +00:00
John Crispin
623da91e4d brcm2708: remove unneeded base-files
Device tree exports board name/model and device LEDs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46397
2015-07-17 12:48:02 +00:00
John Crispin
2de7910102 brcm2708: Implement sysupgrade
Implement sysupgrade for Raspberry Pi, similar to the way it is done on x86:
The config files are saved in the boot partition and moved to where they are
normally expected in preinit.

Also add optional gzip compression for the SD card image, since this can save
a lot of space (76M vs 6M), also similar to x86.

Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 46347
2015-07-14 07:39:10 +00:00
John Crispin
9270474941 brcm2708: force uart as the default console for procd and remove nonexistent console
procd gets last console from cmdline, so swapping tty1 (framebuffer) and ttyAMA0 (uart) is enough to force procd output via uart

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44448
2015-02-14 20:48:14 +00:00
John Crispin
dc72499b53 brcm2708: add board detection and LED support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44447
2015-02-14 20:48:08 +00:00
John Crispin
91e2f1e9a6 brcm2708: Use uci-defaults for network config
By using uci-defaults force_link is enabled, which fixes some link issues if ethernet cable isn't connected when LAN is initialized.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 41583
2014-07-12 06:50:21 +00:00
John Crispin
0e9e7dcd10 adds target used by rapsberry pi
Add support for Raspberry Pi / brcm2708 / 2835

Signed-off-by: Ian Ridge <ianridge [at] gmail.com>

SVN-Revision: 32825
2012-07-24 20:39:17 +00:00