Commit graph

21 commits

Author SHA1 Message Date
Hauke Mehrtens
c8e742a080 mac80211: wl12xx: build them again
WL_TI is bool but was set to =m, which deactivated it. Now it is set to
=y and should be activated in the config so the wl12xx driver gets
build.

This closes #14212.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38333
2013-10-07 22:16:17 +00:00
Hauke Mehrtens
16675de754 mac80211: brcmfmac: BRCMFMAC_USB was not set in config
Somehow BRCMFMAC_USB was not set in the build and brcmfmac.ko did not had usb support.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38332
2013-10-07 21:49:28 +00:00
Hauke Mehrtens
302d27f268 c80211: add iwldvm to iwlwifi, this is needed to support the old wifi card.
This closes #14258

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38277
2013-10-01 22:41:46 +00:00
John Crispin
f12f4074af kernel: make most modules use AutoProbe
now that we have modprobe we can set more than half of the modules to AutoProbe

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38021
2013-09-17 21:45:17 +00:00
Hauke Mehrtens
11ae55cc95 mac80211: do not download carl9170 firmware separately, but use the one from linux-firemware
linux-firemware contains the same version we loaded without this patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37901
2013-09-05 19:43:38 +00:00
Hauke Mehrtens
82a2969100 ath10k: enable Atheros 802.11ac driver
This enables usage of the ath10k driver on OpenWrt. Only 2.0 PCI hardware
is supported. The ath10k firmware is currently only available
through github so use that as its source for now.

This goes build tested, not run time tested.

[Hauke: I did some minor changes]

Cc: ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: Mathieu Olivari <mathieu@qca.qualcomm.com>
Cc: Jerome Proffit <jproffit@qca.qualcomm.com>
Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: Matthew McClintock <mmcclint@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37898
2013-09-05 19:35:14 +00:00
Gabor Juhos
6c29525f42 mac80211: add a bunch of rt2x00 specific changes
Backport some rt2x00 specific changes from
wireless-testing/master-2013-08-26 to add
support for RT3573 based devices.

Also refresh the rt2x00 specific patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37843
2013-08-27 10:44:06 +00:00
Hauke Mehrtens
3f351e2770 mac80211: rtlwifi depends on PCI or USB support in the Kconfig file
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37711
2013-08-05 21:57:48 +00:00
Gabor Juhos
259c36358f mac80211: fix rt2x00 dependency
The current dependency prevents building of the
rt2800{pci,usb} drivers for RT3883. Change the
dependency to fix this.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37699
2013-08-05 09:24:19 +00:00
Gabor Juhos
3573494b19 mac80211: enable RT{33,35,53,55}XX chip support in rt2800usb
Closes #13951.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37697
2013-08-05 09:09:40 +00:00
Jonas Gorski
c7976ae5f8 mac80211: add rtlwifi drivers
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
[jogo@openwrt.org: add missing DRIVER_11N_SUPPORT select, add missing
		   usb dependencies, backport upstream fixes for Kconfig
		   issues]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37687
2013-08-04 15:32:36 +00:00
Felix Fietkau
c67a12711d mac80211: add support for verbose builds using V=sc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37597
2013-07-29 09:38:08 +00:00
Jonas Gorski
108b880748 mac80211: add missing dependencies
Add missing dependencies for rt2800-lib and lib80211.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37422
2013-07-19 09:49:04 +00:00
Hauke Mehrtens
13f3c9dbe5 mac80211: b43: load b43 on core rev 17 and 18.
This is now controlled by a module parameter and the default
configuration depends on brcmsmac being installed.
This patch causes b43 to take core rev 17 and 18 always by default.

SVN-Revision: 37307
2013-07-14 14:23:04 +00:00
Hauke Mehrtens
71230b33c1 mac80211: b43: activate LP-Phy support every time
SVN-Revision: 37305
2013-07-14 14:13:32 +00:00
Felix Fietkau
92961e0917 mac80211: reconfigure in Build/Compile instead of Build/Configure to catch kernel config changes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37265
2013-07-12 08:10:19 +00:00
John Crispin
cb179cb262 mac80211: make rt2x00_soc depend on !rt3883
https://dev.openwrt.org/ticket/13777

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37162
2013-07-04 13:31:18 +00:00
Felix Fietkau
2d8990256c mac80211: use a new tarball with updated backport code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37105
2013-06-30 14:49:14 +00:00
Felix Fietkau
12c033dfd9 mac80211: update to wireless-testing 2013-06-27, fix ATH_USER_REGD handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37097
2013-06-30 10:44:19 +00:00
John Crispin
1761b7b370 mac80211: disable rt2x00 on mt7620a
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37037
2013-06-27 07:25:13 +00:00
John Crispin
4ebf19b48f packages: clean up the package folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37007
2013-06-21 16:54:37 +00:00
Renamed from package/mac80211/Makefile (Browse further)