Commit graph

2027 commits

Author SHA1 Message Date
Hauke Mehrtens
fcbc97ad78 kernel: update kernel 4.1 to version 4.1.20
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49035
2016-03-18 23:41:21 +00:00
Hauke Mehrtens
7ed9ee6f30 kernel: add missing kernel options
This was found by the build bot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49033
2016-03-17 22:36:27 +00:00
Hauke Mehrtens
b3aae4c672 kernel: update kernel 4.4 to version 4.4.6
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49032
2016-03-17 21:41:07 +00:00
Rafał Miłecki
0e2f0196a2 kernel: backport bcma 4.6 changes for flashes
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48960
2016-03-07 23:09:26 +00:00
Felix Fietkau
b9f52b6b86 kernel: add MIPS kernel fix for an uninitialized CPU map
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48956
2016-03-07 21:00:46 +00:00
Felix Fietkau
46c7d0d1ab kernel: remove linux 4.3 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48955
2016-03-07 17:56:58 +00:00
Hauke Mehrtens
e9d7ee4f41 kernel: update kernel 4.4 to version 4.4.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48933
2016-03-05 17:51:37 +00:00
Hauke Mehrtens
21cf64b4ad kernel: fix section mismatch in crashlog
The function memblock_insert_region() is in the section
__init_memblock, also put crashlog_init_memblock there.

This fixes this section mismatch warning:
The function memblock_insert_region.isra.1() references
the function __meminit crashlog_init_memblock().
This is often because memblock_insert_region.isra.1 lacks a __meminit
annotation or the annotation of crashlog_init_memblock is wrong.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48931
2016-03-05 16:23:50 +00:00
Hauke Mehrtens
683c046673 kernel: add missing config options
The buildbots complained about these config options being missing for arm64:
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48929
2016-03-05 16:22:45 +00:00
Felix Fietkau
6bece706ec mac80211: ath9k: enable GPIO buttons
Enable platform-defined GPIO button support for ath9k device.
Key poller is activated for attached platform buttons.
Requires ath9k GPIO chip access.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48921
2016-03-05 09:45:03 +00:00
John Crispin
3a03c08c82 AR8216: improve mmd register access
Combine all bus operations for one MMD access in one function.
Protecting all these bus operations with one lock also helps
to avoid potential issues due to bus operations intercepting
the register and data write.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48914
2016-03-04 08:33:33 +00:00
John Crispin
d3776bdfc9 AR8216: make ARL age time configurable
The default TTL for address resolution table entries is 5 minutes
for all members of the AR8216 family. This can cause issues if
e.g. Wifi clients roam to another AP and their MAC appears on
another switch port suddenly. Then the client may not be reachable
until the old ARL entry expires.
I would have expected the switch to invalidate old entries if it
detects the same MAC on another port. But that's not the case.

Therefore make the TTL for ARL entries configurable.
The effective TTL will always be a multiple of 7 seconds.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48913
2016-03-04 08:33:30 +00:00
John Crispin
4eaa750089 AR8216: remove redundant port number in MIB header line
The line before includes the port number anyway so there's no need
to duplicate the port number in the MIB info header.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48912
2016-03-04 08:33:28 +00:00
John Crispin
f03ec2baf7 AR8216: complement MIB counters with info in GiB / MiB / KiB
The decimal values especially for TxByte and RxGoodByte are hard to read
once bigger amounts of data have been transferred.
Therefore complement the decimal values with info in GiB / MiB / KiB.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48911
2016-03-04 08:33:25 +00:00
John Crispin
76e1efc042 AR8216: don't display MIB counters if all are empty
For unused switch ports all MIB values are zero. Displaying ~40 empty
MIB counters is just confusing and makes it hard to read the output of
swconfig dev <dev> show.
Therefore, if all MIB counters for a port are zero, just display
an info that the MIB counters are empty.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48910
2016-03-04 08:33:22 +00:00
Felix Fietkau
a8c15c0204 mac80211: ath9k: enable platform WLAN LED name
Enable platform-supplied WLAN LED name for ath9k device.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>

SVN-Revision: 48879
2016-03-02 13:22:40 +00:00
Hauke Mehrtens
7768735873 kernel: update kernel 3.18 to version 3.18.27
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48874
2016-03-01 23:16:17 +00:00
Rafał Miłecki
578e8d6c58 kernel: use upstream accepted bcm47xxpart patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48805
2016-02-26 11:12:50 +00:00
Felix Fietkau
1185e645a7 kernel: disable MIPS VDSO by default until the cache issues have been resolved
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48802
2016-02-26 09:49:32 +00:00
Hauke Mehrtens
eea54160a1 kernel: deactivate the vdso gettimeofday function.
The vdso version of this function has some problems with the cache.
Very often it works on dated data which causes problem. We are
currently working on fixing this in upstream Linux kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48787
2016-02-25 22:31:51 +00:00
Hauke Mehrtens
cb04b8d582 kernel: update kernel 4.4 to version 4.4.3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48783
2016-02-25 21:54:39 +00:00
Felix Fietkau
d527b82862 switch: allow Ethernet port LEDs to show specific port speeds only
This patch adds speed_mask special file to LEDs connected to switch ports
via 'switch' trigger. It allows to choose which speeds to signal when link
is up. If router has more than one LED per port, they may light up
differently depending on how fast connection is. Default setting is 'all
speeds' so backward compatibility with system scripts (for example uci) is
maintained.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48775
2016-02-25 13:31:26 +00:00
Felix Fietkau
f61a80444c switch: make LED port_mask file write handler use kstrtoul() function
This patch changes swconfig_trig_port_mask_store() handler to utilize
kstrtoul() function instead of call to obsolete simple_strtoul(). Thanks
to this change, new handler takes less memory and makes port_mask special
file accept not only hexadecimal, but also decimal and octal numbers.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48774
2016-02-25 13:31:23 +00:00
Rafał Miłecki
9e9617a864 kernel: replace bgmac patches for BCM47094 with final ones
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48756
2016-02-24 22:43:43 +00:00
Rafał Miłecki
319863f60e kernel: mtdsplit: support uimage with UBI
This patch adds uimage firmware split support for ubi.

Signed-off-by: YounJae Rho <luxflow@live.com>

SVN-Revision: 48755
2016-02-24 22:43:16 +00:00
Rafał Miłecki
1a57ce0c03 kernel: mtdsplit: add missing digest field to Seama header
Seama format has 2 similar headers: container (seal) header and entity
header. The first one has size always set to 0 and doesn't contain MD5
digest.

When dealing with Seama on a flash we deal directly with an entity. You
can see mtdsplit_parse_seama reads from offset 0 and expects entity to
be there. Seama container is used by bootloader / interface only which
extract entity out of it and flash it.

That said we should fix our header struct. This is important as we
calculate possible rootfs offset assuming it may be placed right after
Seama entity. So far calculate offset was always 16B too low.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48754
2016-02-23 14:40:40 +00:00
John Crispin
dbd35c7ca9 kernel: add missing symbols to config-4.4
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48730
2016-02-16 16:25:49 +00:00
Felix Fietkau
2c17b8bcc5 kernel: fix uninitialized variable in bridge multicast-to-unicast patch on 4.3
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48690
2016-02-11 15:00:19 +00:00
Jo-Philipp Wich
d07d65ec30 generic: add missing kconfig symbol
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48675
2016-02-08 14:28:29 +00:00
Felix Fietkau
0fddb7f767 kernel: add missing config symbol (#21797)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48632
2016-02-05 11:50:50 +00:00
Rafał Miłecki
6831bac31f b53: support setting port link
When dealing with Broadcom hardware we can simply use swconfig's generic
helper, we just need to do some validation of requested state.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48623
2016-02-03 09:33:56 +00:00
Rafał Miłecki
b3c3542515 b53: provide PHY access to swconfig
Thanks to this change swconfig can access port PHYs e.g. when setting
port link state with a generic helper.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48622
2016-02-03 09:33:50 +00:00
Rafał Miłecki
19b9e14c47 swconfig: add (PHY) generic helper setting port link
It's quite common for switches to have PHY per port so adding a generic
helper setting link state will help many drivers. It just needs an API
to access PHYs which this patch also adds.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48621
2016-02-03 09:33:38 +00:00
Rafał Miłecki
9220dd5d36 kernel: mtdsplit: support Seama entity with UBI
Some D-Link routers (e.g. DIR-885L) have NAND and use Seama format. It
means OpenWrt will want to have UBI in Sseama entity and should be able
to detect it.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48600
2016-02-01 12:41:53 +00:00
Rafał Miłecki
4156f292c1 kernel: mtdsplit: detect UBI partition when looking for rootfs
This allows mtdsplit parsers work with UBI which is very popular on
NAND flases.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48599
2016-02-01 12:41:47 +00:00
Rafał Miłecki
e1491b341b kernel: mtdsplit: modify rootfs helpers to provide partition type
Our mtdsplit parsers may want to create partition with name choice based
on partition file system (e.g. SquashFS vs. JFFS2). This patch allows
passing extra argument pointing to variable that will be set properly.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48598
2016-02-01 12:41:41 +00:00
Rafał Miłecki
ddc8437f08 kernel: support bgmac on BCM47094
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48564
2016-01-30 13:35:31 +00:00
Rafał Miłecki
e9479e62b0 kernel: backport more 4.6 bcma stuff needed for new chipsets
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48516
2016-01-28 07:00:44 +00:00
Felix Fietkau
aff2ee7e4a kernel: change the OF mtd mac address patch to prefer mtd-mac-address over other properties
Fixes MAC address on TL-WDR4900

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48512
2016-01-27 21:39:16 +00:00
Luka Perkov
401b201d04 generic: mark CONFIG_SUNXI_SRAM as not set
It is marked like this on most targets.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48507
2016-01-26 15:27:42 +00:00
Luka Perkov
9aebe0f782 generic: 4.4: refresh patches
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>

SVN-Revision: 48506
2016-01-26 11:30:45 +00:00
Hauke Mehrtens
a29c7ca3d9 kernel: update kernel 4.3 to version 4.3.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48498
2016-01-25 21:44:48 +00:00
Hauke Mehrtens
4807ca67d6 kernel: update kernel 4.1 to version 4.1.16
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48497
2016-01-25 21:44:12 +00:00
Hauke Mehrtens
85e523e126 kernel: update kernel 3.18 to 3.18.26
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48496
2016-01-25 21:43:26 +00:00
Felix Fietkau
e8e4b6eed8 kernel: fix a small bug in the MIPS highmem fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48482
2016-01-25 10:28:29 +00:00
Felix Fietkau
68fef14e46 kernel: disable CONFIG_USERFAULTFD, it is unused
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48481
2016-01-25 10:28:19 +00:00
Rafał Miłecki
02abeb3b0a kernel: mtdsplit: document Seama splitter a bit
Rename kernel_size variable as it includes whole entity size, not just a
kernel size. Also update comments to match it and describe better what
are we checking/looking for.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48480
2016-01-25 07:18:47 +00:00
Hauke Mehrtens
1c7c997019 kernel: add some missing kernel config options
The built bots found these missing kernel configuration options.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48477
2016-01-24 18:00:53 +00:00
Jonas Gorski
96afb90f3f generic: fix relocate build with binutils 2.25.1
The new .abiflags section was kept, pushing the appended arguments to
the wrong offset and causing it to read the section instead, making
it fail on boot.

Fix this by dropping this section as well as the other sections.

Closes #21679.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48474
2016-01-24 12:36:15 +00:00
Jonas Gorski
a9b4952be1 swconfig: simplify init code
Directly return the return value of genl_register_family_with_ops()
instead of storing it in a temporary variable, then returning it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48472
2016-01-24 12:36:06 +00:00