KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
20449 commits 3 branches 0 tags 154 MiB
Commit graph

113 commits

Author SHA1 Message Date
Gabor Juhos
cbfce53831 kernel: update linux 3.3 to 3.3.4 
SVN-Revision: 31541
 2012-04-30 08:38:11 +00:00
Jonas Gorski
22b4e6b882 kernel: update linux 3.2 to 3.2.16 
SVN-Revision: 31459
 2012-04-24 09:25:35 +00:00
John Crispin
d4f3677cba Adding wifi eeprom extract for ARV752DPW - Easybox 802 
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>

SVN-Revision: 31443
 2012-04-23 09:40:37 +00:00
Mirko Vogt
87cdc0dd5b change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board 
The VLAN mapping on the ARV4520PW board is the following:

port on Router: | VLAN in software:
LAN 1           | 3
LAN 2           | 2
LAN 3           | 1
LAN 4           | 0
DSL             | 4

So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.

SVN-Revision: 31391
 2012-04-21 08:07:21 +00:00
Jonas Gorski
a8f2bc682e kernel: also update the targets to use 3.2.15 
Thanks Gabor for spotting it.

SVN-Revision: 31337
 2012-04-17 13:12:14 +00:00
Jonas Gorski
3a9b6dc313 kernel: update linux 3.3 to 3.3.2 
SVN-Revision: 31336
 2012-04-17 12:51:02 +00:00
Jonas Gorski
ee4c47a134 kernel: update linux 3.2 to 3.2.15 
SVN-Revision: 31335
 2012-04-17 12:50:54 +00:00
John Crispin
83948d6385 adds 3.3 patches and files 
SVN-Revision: 31307
 2012-04-16 12:31:48 +00:00
John Crispin
e3889bcf7c update 3.2 patches 
sync with lantiq kernel series

SVN-Revision: 31260
 2012-04-12 12:33:56 +00:00
Jonas Gorski
16b4cbcdd6 kernel: update linux 3.2 to 3.2.14 
SVN-Revision: 31222
 2012-04-09 14:48:51 +00:00
John Crispin
da3f3f8f9d add Easybox 802 - ARV752DPW 
Implements the ARV752DPW architecture in mach-arv.c

Signed-off-by: Christian Rustmeier <rustmeier@gmail.com>

SVN-Revision: 31206
 2012-04-05 20:03:21 +00:00
John Crispin
94af65db49 enable usb on dgn3500 
A power-enable toggle gpio is not available, it is always on and protected with a resettable fuse.

Signed-off-by: Pieter Voorthuijsen<p.voorthuijsen at gmail.com>

SVN-Revision: 31205
 2012-04-05 20:03:19 +00:00
Jonas Gorski
d87efd8c3c kernel: update linux 3.2 to 3.2.13 and refresh patches 
Also remove a duplicate patch from lantiq (already in generic).

SVN-Revision: 31158
 2012-04-01 07:56:55 +00:00
Felix Fietkau
5f799a0e97 ath9k: make endian check optional 
Turns out it triggers on some AR71xx devices where no swapping should be done.
Enable endian check for the lantiq target.

SVN-Revision: 31084
 2012-03-27 13:21:53 +00:00
John Crispin
b982e8166b cleanup atheros wifi handling 
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31064
 2012-03-25 08:50:38 +00:00
John Crispin
5ea100c39b cleanup image makefile 
SVN-Revision: 31063
 2012-03-25 08:50:32 +00:00
John Crispin
f27c030141 update /etc/uci-defaults/* 
SVN-Revision: 31062
 2012-03-25 08:50:30 +00:00
John Crispin
ba4a7fca7b update profiles 
SVN-Revision: 31061
 2012-03-25 08:50:27 +00:00
John Crispin
0f6a9d5c7c bump kernel to 3.2.12 
SVN-Revision: 31060
 2012-03-25 08:50:09 +00:00
Felix Fietkau
db6e326c56 targets: replace madwifi in profiles with ath5k, madwifi is unmaintained 
SVN-Revision: 31015
 2012-03-19 09:58:13 +00:00
Jonas Gorski
fab5be9b4f lantiq: load dwc_otg early 
Needed for using external rootfs on usb sticks.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 30940
 2012-03-14 10:59:52 +00:00
John Crispin
e5798d7c9b fixes etop locking issue 
SVN-Revision: 30689
 2012-02-23 07:42:00 +00:00
John Crispin
1a71f07d00 generate uboot environment data in target 
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.

uboot environment config is used by fw_printenv fw_setenv tools.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 30537
 2012-02-14 19:07:11 +00:00
John Crispin
7416a5f0aa fix compile error in previous commit 
SVN-Revision: 30534
 2012-02-14 19:07:05 +00:00
John Crispin
cd1a204365 Support booting the Speedport W502V using BRN-BOOT. 
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 30532
 2012-02-14 17:48:04 +00:00
John Crispin
0b07769898 fixes irq locking in ethernet driver 
SVN-Revision: 30522
 2012-02-14 15:05:58 +00:00
John Crispin
55bf39e98c fixes gpio_export patch 
SVN-Revision: 30521
 2012-02-14 15:05:57 +00:00
John Crispin
976d3eb854 add annex selection support to ltq_dsl package 
SVN-Revision: 30518
 2012-02-14 15:05:49 +00:00
Jonas Gorski
1015fab0d7 kernel: update linux 3.1 to 3.1.10 
SVN-Revision: 29966
 2012-01-31 09:43:57 +00:00
John Crispin
49eb3fd845 gigaset 76x 
* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 29763
 2012-01-17 12:10:35 +00:00
Jonas Gorski
c560444a58 kernel: update linux 3.1 to 3.1.9 
SVN-Revision: 29726
 2012-01-13 14:38:28 +00:00
Jonas Gorski
e33bb9ec66 linux: update 3.1 to 3.1.4 
SVN-Revision: 29470
 2011-12-06 19:50:30 +00:00
John Crispin
bf7316424c lantiq: bump to 3.1.3 
SVN-Revision: 29348
 2011-11-28 10:22:58 +00:00
John Crispin
9389593db9 lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch 
This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch

SVN-Revision: 29294
 2011-11-23 12:22:15 +00:00
John Crispin
4982ca983c lantiq: * fixes ath5k eeprom handling * fixes sx76x * adds sx76x to userland api * minor style cleanups 
Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com>

SVN-Revision: 29292
 2011-11-22 18:50:51 +00:00
John Crispin
bbe96f13a6 lantiq: add runtime generation of /etc/config/network 
SVN-Revision: 29161
 2011-11-15 18:21:00 +00:00
John Crispin
79a4642b40 lantiq: fix falcon build breakage 
dev-wifi-rt2x00 fails to build on falcon due to missing pci

SVN-Revision: 29129
 2011-11-14 18:55:58 +00:00
Jonas Gorski
d8acb75009 linux: update 3.1 to 3.1.1 
SVN-Revision: 29007
 2011-11-13 10:48:05 +00:00
John Crispin
a8797d0de6 lantiq: add uci-defaults code for handling leds 
SVN-Revision: 29004
 2011-11-12 23:40:21 +00:00
John Crispin
832e02cd77 lantiq: add /lib/lantiq.sh and make hotplug handlers use it 
SVN-Revision: 29003
 2011-11-12 23:40:16 +00:00
John Crispin
5dcbbf0160 lantiq: rename leds 
SVN-Revision: 29002
 2011-11-12 23:40:12 +00:00
John Crispin
d84b7596d9 lantiq: split compat headers out of bsp header patch 
SVN-Revision: 29001
 2011-11-12 23:40:07 +00:00
John Crispin
2cff80f015 lantiq: adds hotplug handler for loading rt2x00 firmware 
SVN-Revision: 29000
 2011-11-12 23:40:01 +00:00
John Crispin
3660c51c40 lantiq: adds hotplug handler for handling buttons and makes w303v work with it 
SVN-Revision: 28999
 2011-11-12 23:39:56 +00:00
John Crispin
4248705108 lantiq: cleanup default package selection 
SVN-Revision: 28998
 2011-11-12 23:39:51 +00:00
John Crispin
eb20ab87e6 lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it 
SVN-Revision: 28994
 2011-11-12 18:41:15 +00:00
John Crispin
fda4ee22a0 lantiq: improve falcon package selection 
SVN-Revision: 28962
 2011-11-11 21:59:11 +00:00
John Crispin
e1dc73be90 lantiq: fix breakage introduced in 3.1 bump 
SVN-Revision: 28961
 2011-11-11 21:59:01 +00:00
John Crispin
95d36d3efe lantiq: remove obseleted folder. we use 3.1 now 
SVN-Revision: 28728
 2011-11-03 16:33:27 +00:00
John Crispin
ea36ad76bc lantiq: bump to 3.1 
SVN-Revision: 28721
 2011-11-03 15:15:52 +00:00