Commit graph

40175 commits

Author SHA1 Message Date
Yangbo Lu
5b8639f02e layerscape: add ppa firmware package
This patch is to add PPA (The Primary Protected Application)
package and also enable it for all layerscape devices.
LSDK github provides ppa source code git tree, but it
only could be compiled with 64-bit toolchain. For 32-bit
devices, there was no method to use it.
https://github.com/qoriq-open-source/ppa-generic

This patch is to directly use a private ppa binary tree for
both 32-bit and 64-bit devices.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:49 +01:00
Yangbo Lu
82fbca8aaa layerscape: support LSDK ppfe
This patch is to use ppfe git tree on LSDK github
instead of private git tree, and support the latest
ppfe on ls1012ardb.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:49 +01:00
Yangbo Lu
669c02d46d layerscape: fix ls1046ardb 32-bit call trace
Enabled CONFIG_ARCH_DMA_ADDR_T_64BIT in kernel to
resolve below call trace when ls1046ardb 32-bit
started up kernel.

[    0.142141] Bman ver:0a02,02,01
[    0.145326] ------------[ cut here ]------------
[    0.149969] WARNING: CPU: 0 PID: 1 at arch/arm/mm/ioremap.c:303 __arm_ioremap_pfn_caller+0x1ac/0x1d8
[    0.159152] Modules linked in:
[    0.162216] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.51-g9c76e024 #2
[    0.169036] Hardware name: Generic DT based system
[    0.173853] [<c02236a4>] (unwind_backtrace) from [<c021ed94>] (show_stack+0x10/0x14)
[    0.181638] [<c021ed94>] (show_stack) from [<c04d2d38>] (dump_stack+0x98/0xac)
[    0.188899] [<c04d2d38>] (dump_stack) from [<c0245bcc>] (__warn+0xe4/0x100)
[    0.195896] [<c0245bcc>] (__warn) from [<c0245c98>] (warn_slowpath_null+0x20/0x28)
[    0.203504] [<c0245c98>] (warn_slowpath_null) from [<c0229e24>] (__arm_ioremap_pfn_caller+0x1ac/0x1d8)
[    0.212861] [<c0229e24>] (__arm_ioremap_pfn_caller) from [<c0229f0c>] (ioremap_cache+0x20/0x28)
[    0.221608] [<c0229f0c>] (ioremap_cache) from [<c105e390>] (parse_mem_property.part.3+0x18/0x50)
[    0.230441] [<c105e390>] (parse_mem_property.part.3) from [<c105e6dc>] (qman_init_early+0x314/0x334)
[    0.239623] [<c105e6dc>] (qman_init_early) from [<c0201a24>] (do_one_initcall+0xb4/0x168)
[    0.247844] [<c0201a24>] (do_one_initcall) from [<c1000e84>] (kernel_init_freeable+0x1d8/0x280)
[    0.256590] [<c1000e84>] (kernel_init_freeable) from [<c0adbcfc>] (kernel_init+0x8/0x114)
[    0.264812] [<c0adbcfc>] (kernel_init) from [<c021bb28>] (ret_from_fork+0x14/0x2c)
[    0.272423] ---[ end trace 39aaeef329e2a0a2 ]---
[    0.277058] qman-fqd addr 0xfb000000 size 0x800000

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:49 +01:00
Yangbo Lu
110c9e9034 layerscape: update config-4.9
Some new options were introduced by kernel patches.
And some options should be removed/added.
The config-4.9 should be updated accordingly.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:49 +01:00
Yangbo Lu
ce6311d283 layerscape: update kernel patches
Updated kernel patches to align layerscape kernel
with latest LSDK linux (LSDK-17.09-update-103017-V4.9 tag).

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:49 +01:00
Yangbo Lu
ede04541ba layerscape: stop pfe before starting up kernel
For ls1012ardb, pfe should be stopped before starting up
kernel.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Yangbo Lu
38417e9ce1 layerscape: update u-boot to LSDK-1709-update-103017 tag
Updated u-boot to LSDK-1709-update-103017 tag.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Yangbo Lu
1552dd01d9 layerscape: use 1GHz CPU fequency for ls1012ardb
Used 1GHz CPU fequency for ls1012ardb instead of 800MHz.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Yangbo Lu
b915ac8ce2 layerscape: update rcw to LSDK-17.09-update-103017 tag
Updated rcw to LSDK-17.09-update-103017 tag.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Yangbo Lu
69c8e8d00b layerscape: support LEDE boot for ls1088ardb/ls2088ardb
Added u-boot patches to support LEDE boot for ls1088ardb
and ls2088ardb.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Yangbo Lu
47cff4cf5f layerscape: support all-in-one firmware for ls1088ardb/ls2088ardb
Suppport all-in-one firmware for ls1088ardb/ls2088ardb by
integrating u-boot/rcw/mc/dpl/restool.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Yangbo Lu
e47c93bb19 layerscape: remove default profile
Default profile had to enable many packages for all devices
support. This made these packages still enabled when built
for single device. This patch is to remove default profile.
For multiple devices build, it's proper to build with multiple
devices profile.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Yangbo Lu
23c1504059 layerscape: add restool package
restool is a user space application providing the
ability to dynamically create and manage Layerscape
DPAA2 containers and objects from Linux.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Yangbo Lu
1e0276a39a layerscape: add dpl firmware package
This patch is to add data path layout files for the
second generation Data Path Acceleration Architecture.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Yangbo Lu
71a1df796e layerscape: add mc firmware package
This patch is to add package support for Management
Complex Firmware for the second generation Data Path
Acceleration Architecture.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Yangbo Lu
85e0d259d2 layerscape: move fman/rcw/ppfe packages to layerscape/
This patch is to create a layerscape directory for all
firmware packages of layerscape.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Yangbo Lu
4e209e07f7 layerscape: clean up kernel patches
A previous patch disaggregated kernel patch 601 intending to
reverse the ndo_get_stats64 change, but it also dropped
many other changes without a reason. This caused build issue
for layerscape. This patch is to fix that with below steps.
1. Reversed patch "1c4415a layerscape: reverse changes to ndo_get_stats64",
   but kept kernel patch 701 which was a proper fix.
2. Reversed the ndo_get_stats64 change in kernel patch 601.
3. Renamed patch 601 (net patch) to 202 (core-linux patch). Maybe it's
   more proper.

Fixes: 1c4415a679 ("layerscape: reverse changes to ndo_get_stats64")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-11-10 23:00:47 +01:00
Tim Thorpe
bddffc5e7b brcm47xx: fix switch port mapping on Asus RT-N16
On the Asus RT-N16, the ports are not mapped the in the same way as
the RT-N12.  It is, however, the same as the Linksys E3000v1.

Signed-off-by: Tim Thorpe <timfthorpe@gmail.com>
2017-11-10 14:53:04 +01:00
Felix Fietkau
645b163cfc ar71xx: fix regression in 74x164 initialization with 4.9
The memcpy of the init data relies on chip->registers to be initialized,
which only happens later in the code. Move this initialization further
down to make it work.
This was breaking PCIe/USB on some MikroTik RouterBoard devices.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-10 00:53:10 +01:00
Rafał Miłecki
5cd48280fd rpcd: update to the latest version from 2017-11-09
9a8640183c031 plugin: use RTLD_LOCAL instead of RTLD_GLOBAL when loading library

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-11-09 17:30:38 +01:00
Felix Fietkau
b0e6284879 build: fix generating dtb with / in DEVICE_DTS
Fixes layerscape build error

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-09 14:40:32 +01:00
Felix Fietkau
981be0c3bd toolchain/musl: update to version 1.1.18
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-09 12:35:31 +01:00
Felix Fietkau
6bcc1c5331 tools/coreutils: install readlink
Parts of the build system use non-portable invocation of readlink

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-09 12:35:06 +01:00
Yousong Zhou
b2aa820b48 base-files: fix getting gid from group_add_next
Shell function return code only has range [0, 255].  Other values will
be truncated, e.g. return 65536 will have the same effect as return 0

While at it, drop other "return $rc" where rc will almost always take
value 0 and whose value current callers actually do not check

Fixes FS#988

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-11-09 17:42:36 +08:00
Daniel Gimpelevich
a6e9d146f2 lantiq: add missing macaddr retrieval for Netgear DGN3500
The MAC addresses were not being set for LAN and WAN. This will now use the
same MAC mechanism as the rest of the target.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2017-11-08 23:25:05 +01:00
Robert Marko
d0ef27594a ramips: add support for TP-Link TL-WR840N v5
TP-Link TL-WR840N v5 is simple N300 router with 5-port FE switch and
non-detachable antennas, based on MediaTek MT7628NN (aka MT7628N) WiSoC.

Specification:

- MT7628N/N (580 MHz)
- 64 MB of RAM (DDR2)
- 4 MB of FLASH
- 2T2R 2.4 GHz
- 5x 10/100 Mbps Ethernet
- 2x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- 1x LED (GPIO-controlled), 1x button

* LED in TL-WR840N v5 is a dual-color, dual-leads type which isn't
  (fully) supported by gpio-leds driver. This type of LED requires both
  GPIOs state change at the same time to select color or turn it off.
  For now, we support/use only the green part of the LED.
  Orange LED is registered so you can later use it for your own purposes.

  Flash instruction:

  Unlike TL-WR840N v4 flashing through WEB UI works in v5.
  1. Download lede-ramips-mt76x8-tl-wr840n-v5-squashfs-sysupgrade.bin image.
  2. Go to 192.168.0.1
  3. Flash the sysupgrade image through Firmware upgrade section of WEB UI.
  4. Wait until green LED stops flashing and use the router.

Notes:
TFTP recovery is broken since TP-Link reused bootloader code for v4 and
that does not take into account only 4 MB of flash and bricks the device.
So do not use TFTP Recovery or you will have to rewrite SPI flash.
They fixed it in later GPL code,but it is unknown which version of
bootloader you have.

After manually compiling and flashing bootloader from GPL sources TFTP
recovery works properly.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2017-11-08 23:25:05 +01:00
Marko Ratkaj
73c745f64f functions.sh: fix default_postinst function
When we run "opkg install" on a package that installs an uci-defaults
script, functions.sh will fail to evaluate that script in its
default_postinst function.

This happens because there is no "./" present and it searches for the
file in paths specified by the PATH variable. This would work on bash,
but it will not work on ash and some other shells like sh, zsh. This
applys to the ". filename" directive used in this case.

This patch will make the path relative to the /etc/uci-defaults
directory.

Fixes: FS#1021

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2017-11-08 23:18:22 +01:00
Thibaut VARÈNE
74f891752b generic: make mtdsplit-tplink.c honor rootfs offset
The splitter ignored the rootfs offset from the header, probably
because until c1e6e61 it was invalid.

This patch fixes the splitter to use the now correct header data.

Regarding target/linux/ar71xx/files/drivers/mtd/tplinkpart.c,
this particular splitter "falls back" to the correct rootfs offset
reading and as such it doesn't need to be updated, although it will
report a kernel partition length that can be larger than the actual
length as it assumes that partition fills the entire segment up to
the rootfs partition.

Tested-by: Mathias Kresin <dev@kresin.me>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Tested-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Tested-by: Henryk Heisig <hyniu@o2.pl>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2017-11-08 23:18:22 +01:00
Thibaut VARÈNE
050fb3b55c tools/firmware-utils: mktplinkfw* fix rootfs offset
With '-a' specified on the command line, the current code:
- computes an aligned _kernel length_ instead of an aligned _rootfs
  offset_.
- does not update the rootfs offset after computing the new kernel
  length, and instead retains the layout default.

When the kernel length exceeds the available space left with this
fixed offset, the resulting image header contains invalid data, with
the recorded rootfs offset overlapping the kernel area.

This patch ensures that rootfs offset is correctly computed and
reflected in the final image.

Furthermore, the build_fw() function special cases the rootfs_align
option because of the above invalid logic. This is also fixed and
the computed (or command-line provided, or layout-provided) rootfs_ofs
value is used in all cases.

There seems to be no valid reason to extend the kernel length beyond
the actual length of the kernel itself (OFW images don't do it) so this
part of the existing behavior is dropped.

Example image before the patch:
Kernel data offset     : 0x00000200 /      512 bytes
Kernel data length     : 0x00158438 /  1410104 bytes
Kernel load address    : 0x00000080
Kernel entry point     : 0x00000080
Rootfs data offset     : 0x00140000 /  1310720 bytes
Rootfs data length     : 0x001e4f7e /  1986430 bytes

Example image after the patch:
Kernel data offset     : 0x00000200 /      512 bytes
Kernel data length     : 0x001583fe /  1410046 bytes
Kernel load address    : 0x00000080
Kernel entry point     : 0x00000080
Rootfs data offset     : 0x00158600 /  1410560 bytes
Rootfs data length     : 0x001e4e22 /  1986082 bytes

Tested-by: Mathias Kresin <dev@kresin.me>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Tested-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Tested-by: Henryk Heisig <hyniu@o2.pl>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2017-11-08 23:18:22 +01:00
Jonas Gorski
dea3bad84e ltq-ptm: add missing depency to ltq-?dsl-*-mei
Add the required dependency to the mei driver as cought by the depenceny
checker.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-11-07 22:58:58 +01:00
Jonas Gorski
e76340198f ltq-atm: fix dependency for xrx200
Ad the missing dependency for the xrx200 variant, which depends on the
vdsl mei driver.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-11-07 22:58:58 +01:00
Jonas Gorski
a9a78a70cc ltq-adsl-mei: use the same file name for all variant
Due to limitations in the symvers treatment and the mei drivers
exporting the same funtions, modpost might use the wrong mei driver
to link against.

Work around this by renaming them all to the same name, making it
always the "right" module name even if the wrong file was used.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-11-07 22:58:58 +01:00
Jonas Gorski
ee59f8126f partially revert "mwlwifi: switch to AutoProbe"
Apearently we need to ensure mwlwifi loads before mwifiex on
the WRT3200ACM, else mwifiex will claim the wifi.

Fix this by reverting to AutoLoad, but keep the removal of
mac80211 line.

This partially reverts commit 471d5dc6e3.

Fixes: 471d5dc6e3 ("mwlwifi: switch to AutoProbe")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-11-07 22:58:58 +01:00
Jonas Gorski
e26ffb31df build: fix module symbol collection if build_dir is a symlink
If PKG_BUILD_DIR contains symlinks, the generated Module.symvers will
contain the resolved paths, not the virtual path with the symlink name.

This breaks the filter for the module's own symbols, so to fix this
ensure we also grep for the resolved path.

Reported-by: Roman Yeryomin <roman@advem.lv>
Tested-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-11-07 22:58:46 +01:00
Hans Dedecker
1928fc93ce firewall: update to latest git HEAD
c430937 ubus: parse the firewall data within the service itself

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-11-07 22:35:46 +01:00
Jo-Philipp Wich
2b6facc8d4 include: kernel.mk: simplify module autoloading
Let the generic postinstall script invoke "kmodloader" when the just
installed package contains any /etc/module.d/ entries.

This allows us to skip the explicit "insert_module()" calls in the
package postinstall.

Due to the removed insert_module calls we do not need to assemble a
complete list of modules per package anymore, which allows for vast
simplification of the package generation code.

While we're at it, also support specifying default parameters for
modules using either the MODPARAM or MODPARAM.modulename variables
in KernelPackage.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-11-07 12:02:06 +01:00
Jo-Philipp Wich
05a4200d56 uhttpd: fix query string handling
Update to latest Git in order to fix potential memory corruption and invalid
memory access when handling query strings in conjunction with active basic
authentication.

a235636 2017-11-04 file: fix query string handling

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-11-07 12:02:06 +01:00
Daniel Golle
ebdf5ed50b netifd: fix PKG_MIRROR_HASH
commit fbde9ac718 set an incorrect sha256sum which doesn't match the
file http://sources.lede-project.org/netifd-2017-10-31-0f96606b.tar.xz
or a locally packaged checkout (which resulted in a file identical with
the one referenced by the URL above).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-11-07 00:21:02 +01:00
Yury Shvedov
09f90b7829 hostapd: remove default r1_key_holder generation
By default, hostapd assumes r1_key_holder equal to bssid. If LEDE
configures the same static r1 key holder ID on two different APs (BSSes) the
RRB exchanges fails behind them.

Signed-off-by: Yury Shvedov <yshvedov@wimarksystems.com>
2017-11-06 16:39:41 +01:00
Denis Osvald
ee791fa4ab netfilter, iptables: add optional CHECKSUM module
Signed-off-by: Denis Osvald <denis.osvald@sartura.hr>
2017-11-06 16:39:41 +01:00
Zoltan HERPAI
f9ecb0d562 sunxi: add Orange Pi 2 support
- H3 @ 1.3 GHz
- 1GiB DDR3
- 10/100Mbps Ethernet
- Realtek RTL8189ETV wifi
- 4 USB 2.0

Difference to the "Orange Pi Plus" is the lack of Gbit ethernet
and lack of onboard flash.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-11-06 16:39:41 +01:00
Rosen Penev
e555153807 ag71xx: Switch from driver to kernel macro for NAPI_WEIGHT.
NAPI_POLL_WEIGHT was introduced in the kernel for exactly this purpose 5 years ago.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2017-11-06 16:39:41 +01:00
Sergey Ryazanov
890e668273 ixp4xx: drop the jumbo frame support
Current jumbo frame support code allocates rxbuffers of the maximum size
supported by the hardware (~14KB). This happens at the device open time
even if the configured MTU is lower (e.g. if it configured to standard
1500 bytes). Such behavior effectivly prevents interface start on boards
with a low ammount of RAM (e.g. WRT300N v2), since the kernel simly can
not allocates of ~0.8MB (14KB x 64).

So remove jumbo frame support for now.

Reported-by: Nerijus Baliunas <nerijus@users.sourceforge.net>
Tested-by: Nerijus Baliunas <nerijus@users.sourceforge.net>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2017-11-06 16:39:41 +01:00
Sergey Ryazanov
204f3f5987 ixp4xx: fix non-standard phy support
The patch, which adds multiphy support, adds new path for non-standard
PHYs (e.g. MV88E6060 switch IC) to avoid using kernel phy framework. All
work well except the link status traking (Duplex and Speed), which is
reseted as soon as PHY connection procedure is done. This leads to lost
of the link status of non-standard PHY, which is configured exactly in
the ixp4xx_phy_connect() function.

Move the generic reset of a link state to the ixp4xx_phy_connect()
function to the code path, which is intended for handling of a normal
PHY.

Reported-by: Nerijus Baliunas <nerijus@users.sourceforge.net>
Tested-by: Nerijus Baliunas <nerijus@users.sourceforge.net>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2017-11-06 16:39:41 +01:00
Marek Vasut
6d2f3b1b19 package: kernel: dtc: Add DTO support
Add patch with the DT overlay support into the DTC package.

Signed-off-by: Marek Vasut <marex@denx.de>
2017-11-06 16:39:41 +01:00
Ralph Sennhauser
f5468d2486 openssl: fix cryptodev config dependency
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
2017-11-06 16:39:41 +01:00
Kayo Phoenix
6a3565985f sunxi: Added profile for HAOYU Electronics Marsboard A10
The MarsBoard was a short-lived credit-card sized, extendable board with an Allwinner A10 SoC.
http://linux-sunxi.org/MarsBoard_A10

Signed-off-by: Kayo Phoenix <kayo@illumium.org>
[Forward-ported to new target layout:]
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-11-06 16:39:41 +01:00
Arjun AK
63d7c45886 iwinfo: add "PKG_MIRROR_HASH" to the Makefile
Defining it will let the build tool download the tarball file from
a buildbot server, avoiding a clone of the source repo.

Signed-off-by: Arjun AK <lede@arjunak.com>
2017-11-06 16:39:41 +01:00
Felix Fietkau
c078386ae3 ar71xx: only use SPI NOR 4K sectors on smaller flash chips for mikrotik devices
On NOR based Mikrotik devices, 4K sectors significantly slow down
firmware flashing and jffs2 usage. On NAND based devices they may be
necessary to run rbcfg (the boot loader config is often on SPI NOR).

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-06 16:38:28 +01:00
Felix Fietkau
c08293893a kernel: add support for limiting 4K erase sector support based on flash chip size
Some targets need 4K sectors for small flash chips (e.g. some
routerboards, where the entire chip is just one "erase block"), whereas
on other devices 4K sectors lead to horrible flash erase/write
performance.

Set the default limit in the generic kernel configuration to 4 MiB to
ensure that all new platforms don't use 4K sectors for bigger flash
chips. On all existing targets use 16 MiB for now to avoid regressions.
They will be changed individually in follow-up commits.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-06 16:38:25 +01:00