Brings in the following changes:
84b530a732b1 libfstools: Check return values for fread and system
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Brings in the following changes:
52d955fd802a remove obsolete mac os x /opt/local include/library search path
a4e49b4163b2 Fix unused results warnings
48cfff3fbec9 uclient-http: send correct "Host:" header if port is set
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to
support uncompressing images larger than 8 MB when using the bootm
command.
Signed-off-by: Mathias Kresin <dev@kresin.me>
In case the soft reset in dwc2_core_reset() timeouts, the
hsotg->core_params are freed albeit it is owned by the core. This
results into a kernel panic as shown in FS#351.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Use the the dt-bindings macros and add the reset button.
Set the correct polarity for the LEDs and drop the default state.
Remove all trigger for the LEDs. According to the manual the LEDs are
only used to show the operation state, where blue means normal
operation.
Use the MAC-Addresses stored in EEPROM for the ethernet and the
wireless interface.
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
[use leds only for boot status indication, add proper commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
currently (after blogic's edit to my commit) it prints like this:
root@lede:/# service aa
aa does not exist. the following services are available :adblock dnsmasq gpio_switch rpcd system
boot done led sqm uhttpd
crelay dropbear log sysctl umount
cron firewall network sysfixtime urandom_seed
ddns fstab odhcpd sysntpd
which looks pretty bad, and is even worse if someone writes only "service" without arguments, as it will print " does not exist. " which is confusing.
with this commit it looks like this:
root@lede:/# service
service "" not found, the following services are available:
adblock dnsmasq gpio_switch rpcd system
boot done led sqm uhttpd
crelay dropbear log sysctl umount
cron firewall network sysfixtime urandom_seed
ddns fstab odhcpd sysntpd
Yes there is some play with " and ', it is to display "name" or just "" if no service name is entered (like in the example).
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
bnx2 driver support for the x86 architecture. Includes module and
firmware for Broadcom BCM5706/5708/5709/5716 ethernet adapters.
Signed-off-by: George Amanakis <g_amanakis@yahoo.com>
This commit introduced a syntax error in ox820-akitio.dts which is
fixed now:
commit 5cde94d9ab
Author: Daniel Golle <daniel@makrotopia.org>
Date: Sat Sep 24 01:14:53 2016 +0200
oxnas: backport upstream NAND driver
This caused the folowing error message in the build bot:
Error: arch/arm/boot/dts/ox820-akitio.dts:146.3-147.1 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:293: recipe for target 'arch/arm/boot/dts/ox820-akitio.dtb' failed
make[5]: *** [arch/arm/boot/dts/ox820-akitio.dtb] Error 1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This fixes the folowing security problems:
CVE-2016-9586: printf floating point buffer overflow
CVE-2016-9952: Win CE schannel cert wildcard matches too much
CVE-2016-9953: Win CE schannel cert name out of buffer read
CVE-2016-9594: unititialized random
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Currently both libustream-polarssl and libustream-mbedtls
variants define themselves as the DEFAULT_VARIANT
Remove extra DEFAULT_VARIANT from libustream-polarssl.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Later OpenVPN 2.3-openssl versions only enable
TLS cipher suites with perfect forward secrecy, i.e. DHE and ECDHE
cipher suites. ECDHE key exchange is not supported by
OpenVPN 2.3-openssl, enable DHE key exchange to allow LEDE
OpenVPN 2.4-mbedtls clients to connect to such servers.
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reported-by: Lucian Cristian <luci@createc.ro>
Secp384r1 is the default curve for OpenVPN 2.4+. Enable this to
make OpenVPN-mbedtls clients able to perform ECDHE key exchange
with remote OpenVPN 2.4-openssl servers that use the default
OpenVPN curve.
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
We have profile for this device thanks to DEVICE_PACKAGES now.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Russell Senior <russell@personaltelco.net>
We don't use this driver since commit 741715331a ("bcm53xx: switch to
m25p80 and drop bcm53xxspiflash").
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
There was a typo in Makefile that prevented using these profiles.
Fixes: a75ce960ac ("ramips: use different board names for variants")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
depending packages have been moved to kernel-config
- kmod-xen-kbddev in 9fde361
- kmod-xen-fs, kmod-xen-evtchn, kmod-xen-netdev in 018807d
this will also fix imagebuilder
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
An external reset patch for AR955x accidentally led to external reset
being issued twice on AR913x, once before the RTC reset and once after.
This may be causing some stability issues.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This commit was added to improve reset time on old SoC devices that run
into chip hangs more frequently. However with the more recent addition
of full WMAC reset on these chips, it could be problematic.
Drop this patch to ensure that DMA activity is really stopped before the
chip reset is issued
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Opkg's builtin decompression code is unsuitable to process nested archives as
it uses a single shared state and relies on undefined seek behaviour for pipes.
Rework the extraction logic to use the external gzip command as I/O filter for
decompressing data and remove the builtin inflate code entirely.
This shrinks the final opkg binary by about 4KB and results in less runtime
memory consumption due to efficient use of vfork() and less copy-on-write
operations in the forked child.
Rework by Felix: create a thread that relays data to the gzip process
instead of using a fragile poll loop
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The external script used to generate the package lists for the
LEDE wiki's table of packages [1] and package indexes [2] requires
a "Source:" field in the package lists to find package makefiles.
The package makefiles are used to read the package's Category and Submenu.
The "Source:" field was removed in commit
b4aa3c899c
to reduce package list sizes and lessen opkg issues in low ram devices.
Add a separate package list file with full data to be used by the wiki's script.
It's called Packages.manifest and isn't compressed as it's not necessary.
1. https://lede-project.org/packages/start
2. https://lede-project.org/packages/index/start
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
