Commit graph

15530 commits

Author SHA1 Message Date
Jo-Philipp Wich
c834c83f0f ar71xx: add missing symbol to Linux 4.4 config (#21878)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48742
2016-02-18 12:09:34 +00:00
John Crispin
cb5711d72a archs38: remove network config override
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48741
2016-02-18 08:35:21 +00:00
John Crispin
73015c4cb3 linux: add support of Synopsys ARCHS38-based boards
This patch introduces support of new boards with ARC HS38 cores.

ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA.
As with ARC770 we're addind support for 2 boards for now:

 [1] Synopsys SDP board (AXS103)
     This is the same base-board as in AXS101 but with
     FPGA-based CPU-tile where ARCHs38 core is implemented.

 [2] nSIM
     Again this is the same simulation engine but configured for
     new instruction set and features of new CPU.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48740
2016-02-18 08:22:32 +00:00
Luka Perkov
4d966e4dde mvebu: add SolidRun ClearFog A1 support
Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr>

SVN-Revision: 48736
2016-02-17 17:49:26 +00:00
John Crispin
dbd35c7ca9 kernel: add missing symbols to config-4.4
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48730
2016-02-16 16:25:49 +00:00
John Crispin
717bbc3550 at91: udc driver was missing deps
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48726
2016-02-16 16:25:16 +00:00
John Crispin
e4db453eab mvebu: add missing symbols.
this broke full builds of the mvebu target

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48725
2016-02-16 16:25:10 +00:00
John Crispin
8b38a9450b ramips: Add support for Phicomm PSG1208
This patch adds support for Phicomm PSG1208.This is a router with MT7620A SoC with 8M flash and 64M ram.
The WPS led is uesd as status_led because the power light can't be controlled with GPIO.
It seems that the 5g wifi led is connected to MT7612E and it can't be controlled with GPIO too.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>

SVN-Revision: 48721
2016-02-15 18:45:22 +00:00
Jo-Philipp Wich
473e9cad43 ar71xx: add missing kernel symbol (#21849)
Also reorder subtarget kernel configs.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48717
2016-02-12 19:55:07 +00:00
John Crispin
ba53b33453 ramips: Support LEDs on D-Link DIR-860L B1
Adds the required gpio definitions.

Signed-off-by: Johannes Wienke <languitar@semipol.de>

SVN-Revision: 48715
2016-02-12 09:29:23 +00:00
John Crispin
cede06cebc ar71xx: Support for Ubiquiti UniFi AP AC LITE
Add support for the Ubiquiti UniFi AP AC LITE
Signed-off-by: P.Wassi <p.wassi at gmx.at>

SVN-Revision: 48711
2016-02-12 08:31:32 +00:00
John Crispin
13a85914ae ar71xx: Make code formatting consistent on ath79/machtypes.h
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>

SVN-Revision: 48706
2016-02-12 08:30:38 +00:00
John Crispin
d6cb792d21 ar71xx: Added support for TL-WA801NDv3
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>

SVN-Revision: 48705
2016-02-12 08:30:28 +00:00
John Crispin
9cf8461394 ar71xx: WNR2000v3: exclude USB modules from image
Netgear WNR2000v3 has no USB port yet default system image
includes USB kernel modules. This patch fixes that.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48701
2016-02-12 08:29:54 +00:00
John Crispin
48f82b53d0 use "-gt" instead of ">" with [ in /lib/functions/lantiq_dsl.sh
Avoids inadvertent file creation when executing
`/etc/init.d/dsl_control status`.

Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>

SVN-Revision: 48700
2016-02-12 08:29:44 +00:00
John Crispin
9f9682a79b ramips: Add support for Netgear EX2700
This patch adds support for the Netgear EX2700 and builds an approriate
sysupgrade image.

What's missing is the option to build a factory image flashable via the
router's stock web interface, but this approach is hindered by the fact
that u-boot operforms an additional integrity check, which expects a
uImage header in the last 64 bytes of the "kernel" partition, which
the bootloader expects to be 960k, a size exceeded by the standard
OpenWrt kernel.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>

SVN-Revision: 48698
2016-02-12 08:29:33 +00:00
John Crispin
2d45ad07fc zynq: add new target
Add support for Xilinx ZC702 Dev board

Zynq target is using 4.4 kernel and mainline 2016.1 u-boot.

Patch is tested with Xilinx ZC702 Dev board with SD boot mode.

known issues:
 - no QSPI driver in 4.4 kernel: no QSPI flash support
 - USB is not working in 4.4 kernel

Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

 create mode 100644 package/boot/uboot-zynq/Makefile
 create mode 100644 target/linux/zynq/Makefile
 create mode 100644 target/linux/zynq/base-files.mk
 create mode 100755 target/linux/zynq/base-files/etc/board.d/02_network
 create mode 100644 target/linux/zynq/base-files/etc/config/network
 create mode 100644 target/linux/zynq/base-files/etc/inittab
 create mode 100644 target/linux/zynq/config-4.4
 create mode 100644 target/linux/zynq/image/Makefile
 create mode 100755 target/linux/zynq/image/mkits.sh
 create mode 100644 target/linux/zynq/patches-4.4/0001-arm-dts-zynq-zc702.dts-Set-default-rdinit-to-sbin-in.patch
 create mode 100644 target/linux/zynq/profiles/zc702.mk

SVN-Revision: 48697
2016-02-12 08:29:24 +00:00
Felix Fietkau
376e3ade79 ag71xx: fix build error with debugfs code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48695
2016-02-11 22:48:36 +00:00
Felix Fietkau
37dd95b772 ag71xx: increase rx ring size to improve performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48694
2016-02-11 15:02:07 +00:00
Felix Fietkau
11ca71cfdb ag71xx: store ring size order instead of ring size to avoid div/mod
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48693
2016-02-11 15:02:00 +00:00
Felix Fietkau
033fbb7778 ag71xx: increase tx ring size to improve performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48692
2016-02-11 15:01:54 +00:00
Felix Fietkau
b7a2c533da ag71xx: optimize icache footprint of the receive poll function
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48691
2016-02-11 15:01:48 +00:00
Felix Fietkau
2c17b8bcc5 kernel: fix uninitialized variable in bridge multicast-to-unicast patch on 4.3
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48690
2016-02-11 15:00:19 +00:00
Jo-Philipp Wich
2d04407e40 mvebu: fix WRT1900AC v1 LED driver module
Update OpenWRT build tree to reflect changes in TLC-591xx LED family driver.

In kernels < 4.0 the driver was present in form of a patch for the TLC-59116 chip,
and was upstreamed later in kernels > 4.0 to support the entire chip family.

Signed-off-by: Sebastian Careba <nitroshift@yahoo.com>
[jow: fix Kconfig symbol name]
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48684
2016-02-09 12:33:53 +00:00
Jo-Philipp Wich
4aeeead303 x86: preserve partition table on sysupgrade
With this patch sysupgrade will write directly to the partitions
instead of to the main disk.  The UUID is copied from the image
to the MBR as well.  This prevents the mbr from being completely
overwritten and losing the partition table.  The -p option has
been added to maintain the original behavior and overwite the
entire disk with the new image.  Tests have been added to ensure
that the image partitions match up with the active partitions.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 48682
2016-02-09 12:33:17 +00:00
Felix Fietkau
6b73b7a8ec ramips: fix build error on oversized images by putting the dir-860l-b1 size check at the end of the chain
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48681
2016-02-08 19:18:21 +00:00
Jo-Philipp Wich
d07d65ec30 generic: add missing kconfig symbol
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48675
2016-02-08 14:28:29 +00:00
Jo-Philipp Wich
6ec31a8487 x86: remove unrelated config override
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48668
2016-02-08 10:58:27 +00:00
John Crispin
e68281e613 brcm2708: add missing symbols
enable CONFIG_PWM
enable the RASPI PWM stuff
fix buildbot w. 4.1

compile tested only

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 48667
2016-02-08 09:22:56 +00:00
John Crispin
6801c4e33e ramips: HLK-RM04 - Enable GPIO14 for WPS button
The top half of UARTF on the HLK-RM04 is used for GPIO.

  mode 1   mode 2
   RIN     GPIO14
   DSR_N   GPIO13
   DCD_N   GPIO12
   DTR_N   GPIO11
   RXD     GPIO10
   CTS_N   GPIO09
   TXD     GPIO08
   RTS_N   GPIO07

This patch applies 3'b101 mode to UARTF:

   GPIO14
   GPIO13
   GPIO12
   GPIO11
   RXD
   CTS_N
   TXD
   RTS_N

Because the base rt5350.dtsi file forces 3'b000 mode, remove the pin setting from this file and apply it directly to the files that inherit from it (WIZFI630A.dts and WT1520.dtsi).  This change makes the rt5350.dtsi file consistent with the mt7620a.dtsi file.

Signed-off-by: John Clark <inindev@gmail.com>

SVN-Revision: 48665
2016-02-08 08:26:27 +00:00
John Crispin
7f672e66f8 rampis: HLK-RM04 - Setup I2C as GPIO
The I2C function of the RT5350 SoC on the HLK-RM04 is used for GPIO1 and GPIO2.

Take note that the I2C_SD pin is GPIO1 on the RT5350 and is exposed on the HLK-RM04 as GPIO0
Likewise the I2C_SCLK pin is GPIO2 on the RT5350 and is exposed on the HLK-RM04 as GPIO1

 group   mode 1    mode 2   hlk-rm04 pin & export
  i2c    i2c_sd    gpio1   (pin 8, hlk-rm04:gpio0)
  i2c    i2c_sclk  gpio2   (pin 9, hlk-rm04:gpio1)

reference:
  http://www.hlktech.net/product_detail.php?ProId=39
  http://cdn.sparkfun.com/datasheets/Wireless/WiFi/RT5350.pdf

Signed-off-by: John Clark <inindev@gmail.com>

SVN-Revision: 48664
2016-02-08 08:26:19 +00:00
John Crispin
480e15f2ce ramips: HLK-RM04 - Fix push button functions
The RESET button of the HLK-RM04 is connected to GPIO0, linux function 0x198
The WPS button of the HLK-RM04 is connected to GPIO14, linux function 0x211

Signed-off-by: John Clark <inindev@gmail.com>

SVN-Revision: 48663
2016-02-08 08:26:11 +00:00
John Crispin
1f26091242 ramips: HLK-RM04 - Remove power LED config
The power LED on the HLK-RM04 is hard wired to the power bus and is not under GPIO control, remove the bogus config for it.
(Note that GPIO0 is actually connected to the RESET button.)

Signed-off-by: John Clark <inindev@gmail.com>

SVN-Revision: 48662
2016-02-08 08:26:02 +00:00
John Crispin
a0e8833cb5 lantiq: VGV7510KW22/VGV7519 update spi pinmux group
With the backport of the kernel 4.5 pinctrl-xway patches (3551609d &
826bca29) the pinmux group "spi" was splitted into "spi_di", "spi_do" &
"spi_clk". But the no longer existing group "spi" is still used by some
device tree source files.

This fixes the detection of the wireless chipset of the VGV7510KW22.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48658
2016-02-08 08:25:31 +00:00
John Crispin
7c0009a52e lantiq: BTHOMEHUBV5A - explicit select the flash device
The stock u-boot doesn't disable unused flash banks. Therefore, the nand
driver tries to initialize a not connected NOR flash and the device
hangs on boot.

Workaround the issue by selecting the second flash bank (NAND).

Signed-off-by: Mathias Kresin <openwrt@kresin.me>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48657
2016-02-08 08:25:22 +00:00
John Crispin
c3fc71527d lantiq: fix wrong parameter order in xway_nand driver
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48656
2016-02-08 08:25:15 +00:00
Felix Fietkau
b1431170ee ar71xx: register only the built-in switch MDIO bus, hook up eth0 to it, should hopefully fix regression reported in #21520
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48652
2016-02-07 21:00:11 +00:00
Felix Fietkau
a63fd6faf7 ar71xx: fix MDIO bus probe on QCA956x
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48651
2016-02-07 21:00:01 +00:00
Felix Fietkau
a5dd378a0e ar71xx: fold patch 622-MIPS-ath79-add-support-for-QCA956x-ethernet.patch into files/
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48650
2016-02-07 20:59:51 +00:00
Felix Fietkau
32dea5d2a9 mpc85xx: fix TL-WDR4900 mac address assignment to match original firmware
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48645
2016-02-07 14:18:36 +00:00
Rafał Miłecki
406a288a3b bcm53xx: add Netgear R8500 GPIOs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48633
2016-02-05 12:33:50 +00:00
Felix Fietkau
0fddb7f767 kernel: add missing config symbol (#21797)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48632
2016-02-05 11:50:50 +00:00
Zoltan Herpai
42cd31a777 sunxi: update orangepi-plus profile to reflect the real uboot package
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48626
2016-02-03 23:57:35 +00:00
Rafał Miłecki
3b76c7cf0b bcm53xx: start working on Netgear R8500
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48625
2016-02-03 22:32:07 +00:00
Rafał Miłecki
6831bac31f b53: support setting port link
When dealing with Broadcom hardware we can simply use swconfig's generic
helper, we just need to do some validation of requested state.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48623
2016-02-03 09:33:56 +00:00
Rafał Miłecki
b3c3542515 b53: provide PHY access to swconfig
Thanks to this change swconfig can access port PHYs e.g. when setting
port link state with a generic helper.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48622
2016-02-03 09:33:50 +00:00
Rafał Miłecki
19b9e14c47 swconfig: add (PHY) generic helper setting port link
It's quite common for switches to have PHY per port so adding a generic
helper setting link state will help many drivers. It just needs an API
to access PHYs which this patch also adds.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48621
2016-02-03 09:33:38 +00:00
Zoltan Herpai
8ebc9e7539 sunxi: bump to 4.4
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48620
2016-02-03 01:24:42 +00:00
Zoltan Herpai
a9c21dd395 sunxi: add support for Orange Pi Plus (H3)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48618
2016-02-02 22:25:05 +00:00
Felix Fietkau
afdb24e3ae ramips: add IMAGE_SIZE to DEVICE_VARS, it is used by build templates
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48611
2016-02-01 17:41:29 +00:00