Felix Fietkau
a7f768bdc8
bcm53xx: add USB LED for Buffalo WZR-1750DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45465
2015-04-16 20:09:42 +00:00
Felix Fietkau
f6cbbe1332
bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45464
2015-04-16 20:09:36 +00:00
Felix Fietkau
93fb3cac1b
base-files: reorder led trigger/brightness writes
...
Depending on configuration, disable the LED before writing the trigger
and enable it after writing it. Fixes LEDs where the value defaults to 1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45463
2015-04-16 20:09:30 +00:00
Felix Fietkau
b3d699bdd3
base-files: add generic preinit script to extract board/model info from device-tree
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45462
2015-04-16 20:09:21 +00:00
Felix Fietkau
d51420eedc
bcm53xx: increate trx maxlen to prevent build failures with bigger images
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45461
2015-04-16 20:09:15 +00:00
Felix Fietkau
f8d499fd3f
bcm53xx: fix WXR-1900DHP power led name and add usb led
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45460
2015-04-16 20:09:08 +00:00
Luka Perkov
76330e9b57
mvebu: better integrate xp-gp
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45459
2015-04-16 13:53:57 +00:00
Felix Fietkau
c64fdadea7
bcm53xx: make use of the new board detection layer
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45458
2015-04-16 12:18:34 +00:00
Felix Fietkau
a0ced5164a
build: tell users to do non-paralle builds on errors
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45457
2015-04-16 12:18:26 +00:00
Imre Kaloz
2705cda813
mvebu: add support for the Linksys Caiman and Cobra
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45456
2015-04-16 09:54:39 +00:00
Luka Perkov
0926e4c22f
mvebu: bring back CONFIG_CPU_THERMAL
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45455
2015-04-16 00:23:34 +00:00
Luka Perkov
a635c0a04e
mvebu: refresh kernel config
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45454
2015-04-16 00:10:42 +00:00
Luka Perkov
dade4535bb
mvebu: fix typo in marvell profile
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45453
2015-04-15 16:23:20 +00:00
Luka Perkov
a046ce235f
mvebu: better integrate 385-ap-db
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45452
2015-04-15 16:23:10 +00:00
Felix Fietkau
147e005fcf
bcm53xx: add USB 2.0 power control for WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45451
2015-04-15 16:06:20 +00:00
Felix Fietkau
83e31eb7e7
bcm53xx: add USB 2.0 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45450
2015-04-15 16:06:14 +00:00
Steven Barth
f1119373f2
odhcp6c: silence "bad number" warnings
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45449
2015-04-15 14:04:17 +00:00
Steven Barth
2eefcd1048
odhcp6c: avoid saving empty RA search domains
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45448
2015-04-15 12:57:41 +00:00
Felix Fietkau
4d67af61be
opkg: fix md5 related #ifdef (thx, swalker)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45447
2015-04-14 22:10:40 +00:00
Felix Fietkau
384ac9cdf7
uclient: update to the latest version, fixes a crash in processing redirect/disconnect after headers
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45446
2015-04-14 21:05:45 +00:00
Rafał Miłecki
3edb55143d
bcm53xx: add (disabled) support for upgrading kernel during sysupgrade
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45445
2015-04-14 20:50:59 +00:00
Rafał Miłecki
8b1b857948
otrx: support for creating simple TRX files
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45444
2015-04-14 20:50:53 +00:00
Rafał Miłecki
3cb8bf44e6
otrx: change command line API to start with a mode
...
This will allow adding more modes without options conflict.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45443
2015-04-14 20:50:46 +00:00
John Crispin
9d982afe5e
rpcd: update to latest git HEAD
...
adds support for reading md5 sums of files
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45442
2015-04-14 19:01:29 +00:00
John Crispin
da2742db3b
ustream-ssl: update to latest git HEAD
...
fixes long writes when using polarssl
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45441
2015-04-14 19:01:24 +00:00
John Crispin
88593747cc
fstools: update to latest git HEAD
...
fixes issues with semi-initialized overlay partitions during firstboot
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45440
2015-04-14 19:01:09 +00:00
John Crispin
911cf6da60
ar71xx: Enable AT803X_PHY to set special flags
...
Open-Mesh OM5P-AN use a AT8035 (F1E) behind one of the ethernet ports. This PHY
requires special flags to work correctly. Otherwise massive packet loss happens
with active POE or when switching the link speed from gigabit ethernet to fast
ethernet. The generic PHY doesn't have support to change these settings.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45439
2015-04-14 19:00:57 +00:00
John Crispin
efbdc168ff
ar71xx: fix ethernet packet loss issues on OM5P-AN
...
The OM5P-AN boards are suffering from ethernet packet loss when booting with
some active POE setups or when switching to Fast Ethernet when previously
booted with Gigabit ethernet attached.
The cause of the problem is that the AR8035 PHYs requires special register
settings to work reliably on these boards. Enable the RGMII TX, RX delays and
disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV
delay in the ETH_CFG register to fix the issue.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45438
2015-04-14 19:00:51 +00:00
John Crispin
cc9a392e49
opkg: drop md5 in favour of sha256
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45437
2015-04-14 19:00:14 +00:00
Rafał Miłecki
0bd2710512
otrx: use %zd to fix printf format warnings
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45436
2015-04-14 16:16:11 +00:00
Steven Barth
6fad3d5524
odhcpd: fix accidental logic inversion
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45435
2015-04-14 14:21:52 +00:00
Felix Fietkau
1ea8e3caca
build: replace the deprecated find argument -perm +0100 with /0100 ( #19480 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45434
2015-04-14 12:49:30 +00:00
Rafał Miłecki
834e60c4f1
otrx: check TRX length read from header to avoid Segmentation fault
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45433
2015-04-14 12:18:57 +00:00
Felix Fietkau
b5073ca2c8
mac80211: merge a number of upstream driver fixes/improvements
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45432
2015-04-14 12:17:34 +00:00
Felix Fietkau
5c9c670616
kernel: update bgmac patches to the latest version submitted
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45431
2015-04-14 12:17:20 +00:00
Rafał Miłecki
cd4fd05648
otrx: include byteswap.h to fix compilation with musl
...
Fixes #19470
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45430
2015-04-14 11:10:14 +00:00
Steven Barth
56573fdb0d
odhcp6c: fix some issue discovered by scan-build
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45429
2015-04-14 08:33:37 +00:00
Steven Barth
7e5bf40cac
odhcpd: avoid illegal memory access in some corner cases
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45428
2015-04-14 08:31:53 +00:00
Felix Fietkau
c99c9f875e
build: set CCACHE_DIR for host builds
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45427
2015-04-14 00:00:55 +00:00
Felix Fietkau
923bef1678
bcm53xx: refresh kernel patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45426
2015-04-13 22:23:37 +00:00
Felix Fietkau
bdb6c313de
qos-scripts: remove layer7 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45425
2015-04-13 22:23:26 +00:00
Felix Fietkau
4e4060138a
iptables: remove layer7 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45424
2015-04-13 22:23:19 +00:00
Felix Fietkau
d0ba3bb1e2
kernel: finally remove layer7 filter support
...
it has been non-functional for years and caused numerous memleaks and
crashes for people that tried to enable it.
it has no maintained upstream source, and it does not look like it's
going to be fixed any time soon
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45423
2015-04-13 22:23:14 +00:00
Felix Fietkau
87f854059a
kernel: fix more bgmac dma init/cleanup issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45422
2015-04-13 20:08:30 +00:00
Imre Kaloz
232c61742e
mvebu: copy the initramfs files to the bin dir
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45421
2015-04-13 20:06:47 +00:00
Felix Fietkau
1bf8e555bb
kernel: sync bgmac changes with latest upstream submission
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45420
2015-04-13 17:32:33 +00:00
Felix Fietkau
24e9f52106
bcm53xx: add support for the Buffalo WXR-1900DHP
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45419
2015-04-13 17:32:25 +00:00
Felix Fietkau
1e48a48915
bcm53xx: fix GPIO pins > 16
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45418
2015-04-13 17:32:18 +00:00
Felix Fietkau
6bc743ef6f
kernel: add bgmac fixes for bcm53xx (fix ethernet bringup on a bcm4709 based device)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45417
2015-04-13 17:32:12 +00:00
Felix Fietkau
1f70f452cc
bcm53xx: add missing l2 cache controller AUXCTL bit
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45416
2015-04-13 17:32:05 +00:00