Commit graph

705 commits

Author SHA1 Message Date
Ted Hess
7590c3c58f scripts: Replace obsolete POSIX tmpnam in slugimage.pl with File::Temp function
Signed-off-by: Ted Hess <thess@kitschensync.net>
2018-06-05 10:07:42 -04:00
Philip Prindeville
e495a05069 env: only use color diffs on terminals
When sending script/env diff's output to a file or pipeline, you
don't want escape characters for ANSI color sequences fouling the
byte stream.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2018-05-05 09:44:43 +02:00
Rosen Penev
1ce846580a download.pl: Change OpenWrt mirrors to HTTPS.
These have supported HTTPS for quite a while. I have not seen any obvious breakage.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-05-01 11:12:15 +02:00
Rosen Penev
9ea90209f9 download.pl: Change SourceForge address to HTTPS.
SourceForge has supported HTTPS for its downloads for a long time now.

I have not been able to see any failures resulting from this change.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-05-01 11:12:15 +02:00
Felix Fietkau
41ab276fe4 scripts/feeds: add support for git feeds with submodules
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2018-04-27 15:19:19 +02:00
Jo-Philipp Wich
746c590882 scripts: bundle-libraries: fix build on OS X (FS#1493)
This allegedly fixes compilation of the library bundler preload library on
Apple OS X. The resulting executables have not been runtime tested due to a
lack of suitable test hardware.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-04-26 16:06:55 +02:00
Sven Eckelmann
0b20490207 ipq40xx: add support for OpenMesh A62
* QCA IPQ4019
* 256 MB of RAM
* 32 MB of SPI NOR flash (s25fl256s1)
  - 2x 15 MB available; but one of the 15 MB regions is the recovery image
* 2T2R 2.4 GHz
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62
* 2T2R 5 GHz (channel 36-64)
  - QCA9888 hw2.0 (PCI)
  - requires special BDF in QCA9888/hw2.0/board-2.bin
    bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=OM-A62
* 2T2R 5 GHz (channel 100-165)
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x button (reset; kmod-input-gpio-keys compatible)
* external watchdog
  - triggered GPIO
* 1x USB (xHCI)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x gigabit ethernet
  - phy@mdio3:
    + Label: Ethernet 1
    + gmac0 (ethaddr) in original firmware
    + 802.3at POE+
  - phy@mdio4:
    + Label: Ethernet 2
    + gmac1 (eth1addr) in original firmware
    + 18-24V passive POE (mode B)
* powered only via POE

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.

The initramfs image can be started using

  setenv bootargs 'loglevel=8 earlycon=msm_serial_dm,0x78af000 console=ttyMSM0,115200 mtdparts=spi0.0:256k(0:SBL1),128k(0:MIBIB),384k(0:QSEE),64k(0:CDT),64k(0:DDRPARAMS),64k(0:APPSBLENV),512k(0:APPSBL),64k(0:ART),64k(0:custom),64k(0:KEYS),15552k(inactive),15552k(inactive2)'
  tftpboot 0x84000000 openwrt-ipq40xx-openmesh_a62-initramfs-fit-uImage.itb
  set fdt_high 0x85000000
  bootm 0x84000000

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
2018-04-23 22:07:22 +02:00
Valentin Spreckels
7a303fe5d1 scripts: add EVA ramboot script
Use the EVA bootloader to load a small linux system into the ram and boot
it from there:

  ./scripts/flashing/eva_ramboot.py 192.168.178.1 path/to/initramfs-kernel.bin

Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE>
Acked-by: John Crispin <john@phrozen.org>
[reworded commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-03-18 22:22:38 +01:00
Sven Eckelmann
1b773a46c2 build: Allow to change the FIT config section name
Some devices only boot when a special config is found in the image and
completely ignore the default entry during the selection. These devices can
now use the variable DEVICE_DTS_CONFIG in their device image definition.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2018-03-17 08:09:04 +01:00
Matthias Schiffer
884c9575e1
scripts/metadata.pm: allow group-only Require-User specs
/lib/functions.sh can deal with Require-User specifications that only
contain a group, but no user. Adjust metadata.pm to allow such
specifications as well.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-02-26 07:19:46 +01:00
Alif M. Ahmad
02a1a8af95 build: cleanup leftover qconf files
``make xconfig`` toplevel target will invoke ``make qconf`` inside
./scripts/config directory, which results a ``qconf`` executable.

This commit removes leftover ``qconf`` executable during ``make
config-clean``.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2018-02-13 11:35:35 +01:00
Jo-Philipp Wich
a9a43f3d79 build: bundle-libraries.sh: patch bundled ld.so
Remove references to /etc/, /lib/ and /usr/ from the bundled ld.so
interpreter using simple binary patching.

This is needed to prevent loading host system libraries such as
libnss_compat.so.2 on foreign systems, which may result in ld.so
inconsistency assertions.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-02-02 13:59:34 +01:00
Yousong Zhou
aa66aa0c9a scripts/qemustart: more portable array operation
The following commands output 1,2,1,1

    cmd0='a=("${a[@]}" 'a'); echo "${#a}"'
    cmd1='a+=('a'); echo "${#a}"'
    bash -c "$cmd0"; zsh -c "$cmd0"
    bash -c "$cmd1"; zsh -c "$cmd1"

The following outputs 0,1,0,0

    cmd2='f() { echo "$#"; }; f "${a[@]}"'
    cmd3="a=(); $cmd2"
    bash -c "$cmd2"; zsh -c "$cmd2"
    bash -c "$cmd3"; zsh -c "$cmd3"

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2018-01-31 16:54:57 +08:00
Jo-Philipp Wich
a405a93fa6 metadata: do not emit broken kconfig dependency statements
Prevent emitting broken dependency statements when resolving references
to non existing packages to an empty provider list.

Fixes: 47d6b05ad3 ("metadata: always resolve dependencies through provides list")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-01-14 19:00:06 +01:00
Matthias Schiffer
06d51dbb9e
scripts/feeds: fix install of packages with different source/binary names
The logic for choice between source and binary packages was reversed.

Fixes: 52719c2b67 "metadata: scripts/feeds: distinguish between source
and binary packages, resolve virtual dependencies"
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-14 17:07:58 +01:00
Matthias Schiffer
de0ccd3532
metadata: improve code readability by using (s)printf instead of string interpolation
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:45 +01:00
Matthias Schiffer
4bb54ed15e
build: remove obsolete "package feature" feature
Package "features" seem to be unused for some time. In any case, custom
Config.in snippets and package PROVIDES are a much more flexible way to
express similar options.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:45 +01:00
Matthias Schiffer
52719c2b67
metadata: scripts/feeds: distinguish between source and binary packages, resolve virtual dependencies
Properly resolve build depends to source packages and runtime depends to
binary packages. Dependencies on virtual packages are resolved to the first
provider now.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:45 +01:00
Matthias Schiffer
47d6b05ad3
metadata: always resolve dependencies through provides list
Instead of adding virtual packages to the normal package list, keep a
separate list for provides, make each package provide itself, and resolve
all dependencies through this list. This allows to use PROVIDES to replace
existing packages.

Fixes FS#837.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer
565de8b8a8
metadata: simplify generation of build depends from runtime depends
Runtime depends cannot have a buildtype suffix, and they never refer to
source package names. In addition, this adds warnings about unsatisfiable
dependencies.

Furthermore, this change fixes the generation of conditional build
dependencies for virtual packages provided by different source packages.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer
5b479f7dcf
metadata: handle target build depends together with host build depends
Target build depends are similar to host build depends in that they refer
to source packages rather than binary packages. Therefore, it makes sense
to handle them together, rather than putting them in a list together with
runtime depends and trying to figure out if the entries refer to source or
to binary packages afterwards.

This does lead to PKG_BUILD_DEPENDS entries referring to binary package
names not working anymore, which requires some fixes in the package
repositories.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer
3abf663c22
build: remove package preconfig feature
This feature has been unused for years, and its scope is too limited to be
actually useful.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer
423ec18116
metadata: remove redundant fields from package hash
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer
f0c702f124
metadata: replace %subdir hash with a path field in source packages
Every single reference to subdir was concatenated with the source package
name, so it makes sense to store the concatenated value instead.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer
504cb913eb
metadata: change pkg->{src} field to hold a reference
We often want to access fields of a source packages through pkg->{src}.
Allow accessing them directly instead of resolving the source hash through
srcpackages.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer
47f292ff78
metadata: interate over source packages when generating Makefile
All build dependencies are between source packages. Interating over source
rather than binary packages simplifies parts of the code and prepares
further improvement.

As a side effect, this changes the implicit default variant of a few
packages (the first defined is used now instead of the lexicographically
first).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
Matthias Schiffer
b2ab9c9d33
metadata: move 'builddepends' from binary to source packages
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:43 +01:00
Matthias Schiffer
39be6e7f19
metadata: move 'buildtypes' from binary to source packages
Build types are a property of source rather than binary packages. This is a
preparation for followup cleanup.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:43 +01:00
Matthias Schiffer
19577582e4
metadata: make srcpackage extensible
Turn the srcpackage values into hashes to allow storing more information
than just binary package names.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:43 +01:00
Matthias Schiffer
1a2b5eb7ac
metadata: remove 'base-files' special case
Nothing explicitly depends on base-files, and even if it would, it would
not cause any problems. Remove the unused special case.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:43 +01:00
Sven Eckelmann
b02fa3336b om-fwupgradecfg-gen.sh: add support for the A42
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2018-01-13 07:58:49 +01:00
Sven Eckelmann
1a384ac0b5 combined-ext-image.sh: generate image in temp dir
The new build commands operate on the input image and use it again as
output image. This conflicts with the way combined-ext-image.sh was
operating. It required that input and output files are different files and
and that it can write freely to the output file.

This can be avoided when all intermediate build steps by
combined-ext-image.sh are done in a temporary directory. The output file is
then only overwritten in the last step.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2018-01-13 07:58:46 +01:00
Matthias Schiffer
0b28cc56d4
scripts/package-metadata.pl: remove broken detection of self-dependencies
A self-dependency is not an error worth a warning; rather, it is very
common: whenever there are dependencies between different binary packages
originating from the same source package, such dependencies occur. Not
actually generating dependency rules is correct, but already handled a few
lines below.

A typo prevented this redundant rule from working, which is the reason the
warning was not actually printed.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-04 17:18:16 +01:00
Jo-Philipp Wich
f4b9d9d6f1 base-files: allow skipping of hash verification
When calling a download target, hash verification is now completely
skipped if we set PKG_HASH=skip.

This allows to easily bump package version:

$ make package/<mypackage>/download PKG_HASH=skip V=s
$ make package/<mypackage>/check FIXUP=1 V=s

This will download the new version of the package, and then automatically
update PKG_HASH with the hash of the new version.  Of course, it is still
the responsibility of the packager to ensure that the new tarball is
legitimate, because it is downloaded from a possibly untrusted source.

Fixes: b30ba14e ("scripts/download.pl: fail loudly if provided hash is unsupported")
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: John Crispin <john@phrozen.org>
2017-12-14 09:29:31 +01:00
Zoltan HERPAI
7b5c989ab9 merge: targets: update image generation and targets
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-12-08 19:41:18 +01:00
Zoltan HERPAI
34bbbbf9c3 merge: base: update base-files and basic config
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-12-08 19:41:18 +01:00
Alif M. Ahmad
b1501a684b scripts/config: add qconf files to .gitignore
This commit adds qconf related files to .gitignore.
The files to be tracked are qconf.cc, qconf.h, and images.c.
The files to be ignored are qconf*.o, qconf*, qconf.moc, and
.tmp_qtcheck.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2017-11-02 15:58:45 +01:00
Alif M. Ahmad
ff43c03c14 scripts/config: Add qconf target to Makefile
qconf is kconfig UI utilizing QT toolkit. This makes it possible to use
graphical interface interaction to configure LEDE build target.

This commit adds qconf target to ./script/config/Makefile to be used by
toplevel ``make xconfig`` later.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2017-11-02 15:58:45 +01:00
Felix Fietkau
349bb6e663 scripts/config: add -DKBUILD_NO_NLS to CXXFLAGS
Preparation for adding C++ code which needs the same flag

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-11-02 15:58:45 +01:00
Alif M. Ahmad
96eb96c3f0 scripts/config: import qconf
Import qconf.cc, qconf.h, and images.c from linux kernel 4.9.13 archive.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2017-11-02 15:58:45 +01:00
Lorenzo Santina
fd84ecda7d treewide: fix shellscript syntax errors/typos
Fix multiple syntax errors in shelscripts (of packages only)
These errors were causing many conditions to not working properly

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[increase PKG_RELEASE, drop command substitution from directip.sh]
Signed-off-by: Mathias Kresin <dev@kresin.em>
2017-09-13 08:07:54 +02:00
Baptiste Jonglez
b30ba14e2a scripts/download.pl: fail loudly if provided hash is unsupported
Currently, if the provided hash is unsupported (length different from 32
or 64 bytes), we happily download the requested file without any kind of
checksum verification.

This is quite dangerous and may provide a false sense of security, because
a single typo in the hash (e.g. one character deleted by mistake) may skip
checksum verification entirely.

Instead, fail immediately if we don't support the provided hash.
In particular, if an external package repository decides to change the
hash algorithm one day, we will now fail loudly instead of skipping
checksum verification without complaints.

Note: if some users of scripts/download.pl knowingly provide an empty hash
because they don't need checksum verification, this change will break
them.  This does not seem to be the case currently, but if this feature is
ever needed, an option should be added to download.pl instead of relying
on the hash being empty.

Fixes: eaa4eba10a ("scripts/download.pl: add SHA-256 support")

Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
2017-09-11 17:13:02 +02:00
Zoltan Gyarmati
0a761fe8ef scripts/dowload.pl: use glob to expand target dir
If CONFIG_DOWNLOAD_FOLDER is set to for example "~/dl", the download
script fails to create the .hash and .dl files with the following
errors:
 Cannot create file ~/dl/dropbear-2017.75.tar.bz2.dl: No such file or directory
 sh: 1: cannot create ~/dl/dropbear-2017.75.tar.bz2.hash: Directory nonexistent

If the tarball already exists in the ~/dl dir, it's properly found and
used, so this issue only affects the download.pl script.
 This patch calls glob() on the target dir parameter, which will expand `~`.

Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
2017-08-30 18:12:36 +02:00
Jo-Philipp Wich
bf5d32af2a scripts/package-metadata.pl: inhibit compile deps on missing build types
When a package declares a PKG_BUILD_DEPENDENCY or HOST_BUILD_DEPENDENCY on
a not existing build type, the metadata script will emit a reference to an
unresolvable build target in tmp/.packagedeps, causing the make process to
fail hard in a way not catchable by the IGNORE_ERRORS mechanism.

In a situation where a package "test-a" declares a build dependency
"PKG_BUILD_DEPENDS:=test-b/host" while the Makefile of "test-b" does not
implement a HostBuild, make fails with an unrecoverable error in the form:

    make[1]: Entering directory '...'
    make[1]: *** No rule to make target 'package/test-b/host/compile',
                 needed by 'package/test-a/compile'.  Stop.
    make[1]: Leaving directory '...'
    .../toplevel.mk:200: recipe for target 'package/test-a/compile' failed
    make: *** [package/test-a/compile] Error 2

Extend the metadata generation script to catch such unresolved references
and emit a visable warning upon detection.

After this change, the script will emit a warning similar to:

    WARNING: Makefile "package/test-a/Makefile" has a build dependency on
    "test-b/host" but "package/test-b/Makefile" does not implement a
    "host" build type

Fixes a global build cluster outage which occured after the "python-cffi"
feed package removed its HostBuild which the "python-cryptography" package
build-depended on.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-07-27 00:37:05 +02:00
Jo-Philipp Wich
9e64874fb2 build: bundle-libraries.sh: do not override argv[0] in inner exec calls
Only mangle argv[0] of the first executed process and leave the argument
vector of subsequent invocations as-is to allow child programs to properly
discover resources relative to their binary locations.

Fixes "cc1" discovery when executing the host gcc through the bundled
"ccache" executable.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-07-24 13:39:21 +02:00
Daniel Engberg
99c4295126 scripts/download.pl: Adjust URLs
Internet2 isn't considered a trusted issuer meaning that https links to
rit.edu will fail.

The host mirror.csclub.uwaterloo.ca has a trusted SSL cert and peering
is good so it can replace rit.edu without performance issues.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
[Jo-Philipp Wich: rewrapped commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-07-21 08:09:45 +02:00
Jo-Philipp Wich
ef1cafa736 build: fix invocation of bundled ld.so in SDK and Imagebuilder
Commit 72d751cba9 "build: rework library bundling" introduced a new helper
binary "runas" whose sole purpose was mangling the argv vector passed to
the actual called ELF image so that the renamed executable could obtain the
proper name from argv[0].

This approach, however totally defeated the purpose of calling bundled ELF
executables through the shipped ld.so loader since the execv() invocation
performed by "runas" would cause the kernel the interprete the final program
image through the system ELF loader again.

To solve the problem, use an alternative approach of shipping a shared object
"runas.so" which uses an ELF ".init_array" function pointer to obtain the
argv[] vector of the to-be-executed main() function and mangle it in-place.

The actual argv[0] value to use is communicated out-of-band using an
environment variable "RUNAS_ARG0" by the shell wrapper script. The wrapper
script also takes care of setting LD_PRELOAD to instruct the shipped ELF
loader to preload the actual ELF program image with the "runas.so" helper
library.

Fixes FS#909.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-07-21 08:09:45 +02:00
Stijn Tintel
6a8cbc08c0 scripts/gen_image_generic.sh: drop NOGRUB variable
It's not used since commit 816a9b30f6.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-07-14 04:09:16 +02:00
Stijn Tintel
a576ed5437 scripts/gen_image_generic.sh: move from x86/image
The script can also be useful for other targets.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-07-14 04:09:16 +02:00
Stijn Tintel
c2a11bc8e4 scripts: make all scripts executable
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-07-14 04:09:16 +02:00