KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
29649 commits 3 branches 0 tags 154 MiB
Commit graph

13165 commits

Author SHA1 Message Date
Felix Fietkau
570fe5c662 kernel: disable soft-reset for generic PHY devices to avoid accidentally clearing preinitialized state 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43757
 2014-12-20 15:26:38 +00:00
Rafał Miłecki
e7d7f59171 bcm53xx: support WAN connected to switch port 0 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43754
 2014-12-20 15:09:01 +00:00
Luka Perkov
0847247129 mvsw6171: note support for 88E6172 switches 
The '6171 and '6172 are similar enough to work
without any changes to the code.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43753
 2014-12-19 22:02:59 +00:00
Luka Perkov
873202fc0b kirkwood: add *plugs to uci-defaults 
Set defaults health led to a timer heartbeet (200/800)
and populate network for:

- GuruplugServerPlus
- SheevaPlug
- SheevaPlug with eSATA

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43752
 2014-12-19 11:05:13 +00:00
Luka Perkov
39743e45f8 kikwood: populate kirkwood.sh with new boards 
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43751
 2014-12-18 18:38:43 +00:00
Luka Perkov
ec9a0f898a kirkwood: set default EA4500 switch config 
This maps the LAN ports to eth0 and WAN port to eth1.
Since there are two interfaces the 802.1q VLAN mode
is unnecessary and left disabled. Port-based VLANs
are used instead.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43750
 2014-12-18 18:38:38 +00:00
Hauke Mehrtens
abca0462d3 kernel: bgmac: fix some problems 
There are some problems in the napi usage that are fixed now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43749
 2014-12-18 16:25:22 +00:00
Hauke Mehrtens
192e945479 bcm53xx: PCIe: add link check again 
When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43748
 2014-12-18 16:23:42 +00:00
Felix Fietkau
4ccf215a3e ar7: remove leftover 3.10 patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43746
 2014-12-18 11:57:42 +00:00
Felix Fietkau
4571fc780d ar71xx: add support for qca956x soc 
This patch adds soc support for QCA9561 and TP9343.
TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China.
The qca956x_wmac has not yet been supported by ath9k.

tested on TL-WDR6500 and TL-WR882N v1 (Chinese version)

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 43744
 2014-12-18 11:28:53 +00:00
Felix Fietkau
2f9b042d69 ar8216: Inline function ar8xxx_create_mii 
Inline function ar8xxx_create_mii.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43743
 2014-12-18 11:28:47 +00:00
Felix Fietkau
2289c7a010 ar8216: Remove read/write/rmw member functions from ar8xxx_priv 
Remove read/write/rmw member functions from ar8xxx_priv

There seems to be no real benefit of the ar8xxx_priv member functions
read/write/rmw as one implementation exists for each of them only.
Especially ar8xxx_mii_rmw is assigned to priv->rmw first and then
mapped to ar8xxx_rmw.
Rename the ar8xxx_mii_.. functions to ar8xxx_.. and use them directly.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43742
 2014-12-18 11:28:39 +00:00
Felix Fietkau
45a494b808 ar8216: Create helpers mii_read32 / mii_write32 for 32 bit MII ops 
Create helpers mii_read32 / mii_write32 for 32 bit MII ops.
Rename r3 variable to page in ar8xxx_mii_write to make it consistent
with the other ar8xxx_mii_xxxx functions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43741
 2014-12-18 11:28:34 +00:00
Felix Fietkau
0e7f844c66 ar8216: Factor out chip-specific parameters from ar8xxx_probe_switch 
Factor out chip-specific parameters from ar8xxx_probe_switch.
Move the ar8xxx_chip definitions after the swops definitions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43740
 2014-12-18 11:28:28 +00:00
Felix Fietkau
054767cebc ar8216: remove unused function parameter in ar8327_led_register 
Remove unused function parameter in ar8327_led_register.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43739
 2014-12-18 11:28:20 +00:00
Rafał Miłecki
e21e9c5548 bcm53xx: backport spi-nor changes and update bcm53xxspiflash 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43738
 2014-12-17 14:53:25 +00:00
Felix Fietkau
d27c682def kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43736
 2014-12-17 12:27:14 +00:00
Luka Perkov
309e74b86d kirkwood: add sheevaplug and derivatives 
Add kirkwood FDT:
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
- Topkick1281P2

Signed-off-by: Gérald Kerma <drEagle@doukki.net>

SVN-Revision: 43735
 2014-12-17 08:33:55 +00:00
Imre Kaloz
211cac98d5 Belkin AC 1750 DB (F9K1115v2) support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43734
 2014-12-17 08:27:38 +00:00
John Crispin
0ffb7323d0 ralink: remove partitoon map from mt7621.dtsi 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43720
 2014-12-15 15:55:37 +00:00
Rafał Miłecki
dd9ca05249 bcm53xx: sysupgrade support for devices with serial flash 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43719
 2014-12-15 15:43:46 +00:00
Rafał Miłecki
c3e9796cd5 brcm47xx: extract magics from specific upgrade images (and still reject them) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43718
 2014-12-15 11:09:14 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument 
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
 2014-12-15 10:37:00 +00:00
Rafał Miłecki
a5b6b7e419 brcm47xx: detect (and still reject for now) CyberTAN fw format 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43714
 2014-12-15 09:59:44 +00:00
Rafał Miłecki
fbea00b031 ramips: update mtd patches to apply after changes from r43700 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43709
 2014-12-15 09:10:43 +00:00
Rafał Miłecki
b5b4bdc066 brcm47xx: use separated function in upgrade to detect file type 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43708
 2014-12-15 08:51:14 +00:00
John Crispin
2db6da5532 kirkwood: enable EA4500 switch on 3.18 
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43704
 2014-12-14 08:57:58 +00:00
John Crispin
374ab9decc gemini: update usb driver and merge registers into one patch 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43703
 2014-12-14 08:57:52 +00:00
John Crispin
fef7b4241f gemini: merge register ethernet patches into one 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43702
 2014-12-14 08:57:43 +00:00
John Crispin
6f2b7567b8 ralink: drop old pinmux nodes from dts files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43701
 2014-12-14 08:57:16 +00:00
Rafał Miłecki
b1bfed548c kernel: warn users to use the new (dedicated) firmware splitter 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43700
 2014-12-14 00:35:03 +00:00
Rafał Miłecki
2b4fbeb6d4 kernel: move old firmware uimage splitter into separated patch 
This will allow us to drop it in the future. This patch doesn't change
the final mtdpart.c, it remains the same.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43696
 2014-12-13 20:06:47 +00:00
Felix Fietkau
e984869e22 realview: drop old kernel configs 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43692
 2014-12-13 11:55:59 +00:00
Felix Fietkau
cfe3280494 au1000: remove leftover 3.3 kernel config 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43691
 2014-12-13 11:55:49 +00:00
Felix Fietkau
511fadd857 au1000: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43690
 2014-12-13 11:55:41 +00:00
Felix Fietkau
0f25db1a7d rb532: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43689
 2014-12-13 11:55:32 +00:00
Felix Fietkau
d34e2a337c at91: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43688
 2014-12-13 11:55:24 +00:00
Felix Fietkau
45380ebd1a brcm2708: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43687
 2014-12-13 11:55:11 +00:00
Felix Fietkau
170ce29617 ixp4xx: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43686
 2014-12-13 11:55:04 +00:00
Felix Fietkau
c7e8b5ebbd lantiq: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43685
 2014-12-13 11:54:57 +00:00
Felix Fietkau
daeec86fba mpc85xx: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43684
 2014-12-13 11:54:49 +00:00
Florian Fainelli
8692819c2c netlogic: fix XLR network driver build 
Backport an upstream submission to fix xlr_net

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43682
 2014-12-13 08:08:30 +00:00
John Crispin
263070a2e7 ramips:Add support for Aigale Ai-BR100 
Aigale Ai-BR100 is a router with mt7620a soc.
There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led.

Signed-off-by: 郭传鈜 <gch981213@gmail.com>

SVN-Revision: 43681
 2014-12-13 08:07:03 +00:00
John Crispin
aa697f1313 mxs: indention and whitespace fixes 
Align this file with the style of most other modules.mk.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43680
 2014-12-13 08:06:22 +00:00
John Crispin
a28d07abbe ar71xx: add an extra check on board_name for ath10k firmware patchs 
It moves firmware patch code behind an extra check on board_name.
Otherwise it will calculate firmware checksum for unaffected boards.
It also reduce boottime by a md5 calculation and removes error message
on boot if firmware not found.

SVN-Revision: 43679
 2014-12-13 08:06:01 +00:00
John Crispin
10dbdb28d7 oxnas: fix gpio-fan on kd20 
define speed-map and include kmod-hwmon-gpiofan in kd20 profile

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43678
 2014-12-13 08:04:54 +00:00
John Crispin
9013a144fd oxnas: also make use of the GPIO poweroff driver 
Works great to power-off the kd20 ;)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43677
 2014-12-13 08:02:52 +00:00
John Crispin
4a7c88f139 kernel/generic: remove some left-over garbage from ledtrig patch 
cosmetics. clean a style issue introduced by r43674.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43676
 2014-12-13 08:00:22 +00:00
John Crispin
118534ea39 oxnas: use libata ledtrig support for kd20 hdd leds 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43675
 2014-12-12 20:24:33 +00:00
John Crispin
ee6b5c6007 kernel/generic: add ledtrig support to libata 
SVN-Revision: 43674
 2014-12-12 20:24:21 +00:00
John Crispin
1701a9a4b9 oxnas: clean up default package selection 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43673
 2014-12-12 20:24:13 +00:00
John Crispin
d7b4bf8966 kirkwood: Iomega ix2-200: wire up the GPIO poweroff driver in the DTS file 
Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43670
 2014-12-12 17:14:14 +00:00
Felix Fietkau
5b16fd1bf8 ar8216: enable cpu port to receive arp and broadcast frames for ar8236 
Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 43668
 2014-12-12 16:23:29 +00:00
John Crispin
6c4e7b22eb ralink: fix lenovo y1 wan port mapping 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43667
 2014-12-12 16:17:31 +00:00
John Crispin
7068b7ed1c oxnas: build S-ATA driver as a module 
From: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43665
 2014-12-12 16:17:13 +00:00
John Crispin
b1f7a027da ralink: make uartf functional on AWM002 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43664
 2014-12-12 16:17:03 +00:00
John Crispin
58a4113c5e oxnas: use u-boot.bin in KDIR 
This fixes building *u-boot-initramfs.bin images using ImageBuilder

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43663
 2014-12-12 16:16:57 +00:00
Zoltan Herpai
8feb491156 sunxi: fix led on bananapi 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43661
 2014-12-12 16:11:17 +00:00
Zoltan Herpai
92cf73cf11 mxs: allow bootloader to pass kernel cmdline 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43657
 2014-12-12 13:37:21 +00:00
Zoltan Herpai
a1467fb73b mxs: change mxs-lradc module to depend on kmod-iio-core instead of hardcoding 
Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43656
 2014-12-12 13:18:29 +00:00
Zoltan Herpai
f34dfaf249 mxs: add i2c and spi packages to profiles 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43651
 2014-12-12 12:14:40 +00:00
Zoltan Herpai
50f9d27da8 mxs: fix automatic status led detection 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43650
 2014-12-12 12:01:39 +00:00
Zoltan Herpai
1014bb0fb4 mxs: update dts file for Duckbill 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43649
 2014-12-12 11:43:56 +00:00
Zoltan Herpai
2265c4db31 mxs: i2c changes - add package for i2c module - remove i2c debug 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43648
 2014-12-12 11:39:22 +00:00
Zoltan Herpai
fc2dff246d mxs: add kernel module for spi interface 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43647
 2014-12-12 11:10:04 +00:00
Zoltan Herpai
276a732a77 mxs: make boardname consistent with other targets 
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43646
 2014-12-12 11:03:55 +00:00
Luka Perkov
a3eed6bc35 kernel: refresh patches 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43643
 2014-12-11 23:29:07 +00:00
Luka Perkov
a2a6077fd0 kirkwood: sort 110-nas profile 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43642
 2014-12-11 23:29:04 +00:00
John Crispin
21349229f7 au1000: revert 43626 due to syntax errors 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43641
 2014-12-11 22:27:56 +00:00
John Crispin
ad35bcc41e oxnas: use ARM BCJ filter for XZ decompression 
Restoring the config for kernel 3.14 didn't contain that change already
made to config-3.18.
It is needed to make squashfs in the kernel match the compression settings
for ARCH=arm in the framework.
If set to ARMTHUMB, boot fails due to squashfs being unreadable if the
filesystem was generated for wth ARM BCJ filter.

in include/image.mk:    BCJ_FILTER:=-Xbcj $(LINUX_KARCH)
Thus the ARM filter is used for all ARM targets.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43640
 2014-12-11 20:41:51 +00:00
Rafał Miłecki
3aaee1ba02 bcm53xx: failsafe support 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43639
 2014-12-11 20:31:07 +00:00
Felix Fietkau
bb4ffcf928 xburst: fix subtarget config file names 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43637
 2014-12-11 20:07:52 +00:00
Felix Fietkau
4b80e52575 x86: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43636
 2014-12-11 20:07:45 +00:00
Felix Fietkau
3cc3c0a518 octeon: remove linux 3.10 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43635
 2014-12-11 20:07:39 +00:00
Felix Fietkau
c095c7c202 adm8668: remove linux 3.3 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43634
 2014-12-11 20:07:31 +00:00
Jonas Gorski
b7b52ce7de ar7: remove config-3.10 
Remove a leftover file from the 3.10 support removal.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43632
 2014-12-11 19:35:43 +00:00
John Crispin
6f4656c19b netlogic: sync kernel config 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43630
 2014-12-11 18:58:12 +00:00
John Crispin
1ef2106725 ralink: mt7621 was missing a symbol that made the CC builder fail 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43629
 2014-12-11 18:54:30 +00:00
John Crispin
ce06a742c9 mcp85xx/p1020: fixup config-default 
this was missed during the 3.14 bump

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43628
 2014-12-11 18:39:22 +00:00
John Crispin
6d52fd203d kernel/modules: fix chipidea 
it should needs to depend on imx and mxs

also remove duplicate kmod definition from mxs target

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43627
 2014-12-11 18:35:41 +00:00
John Crispin
ed61e202a1 au1000: distinguish different models and set correct MAC-address 
The target au1000 has at least 2 different models, the
'InternetBox' and the 'MeshCube' which look very similar
from the kernel point of view but are totally different
devices which base on the same design. Populating /tmp/sysinfo
now. The 1st one has an issue which leads to a random
mac-address after each boot which is corrected now via
reading the bootloader-env. The real fix would be
converting to DTS, this is only a workaround now.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43626
 2014-12-11 18:28:44 +00:00
Felix Fietkau
1558a6bcbf mpc85xx: fix another typo in the image makefile 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43625
 2014-12-11 18:18:16 +00:00
Felix Fietkau
5c89c4a5de mpc85xx: add missing devicetree ranges property for ethernet devices 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43624
 2014-12-11 18:18:10 +00:00
Felix Fietkau
4db5bc59b1 mpc85xx: fix typo in image name 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43622
 2014-12-11 17:52:12 +00:00
Felix Fietkau
db9f9a6407 sdk: add missing kernel include files 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43621
 2014-12-11 17:03:04 +00:00
Felix Fietkau
2d9d3e7163 mpc85xx: fix initramfs images 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43620
 2014-12-11 15:29:39 +00:00
Rafał Miłecki
b55199cf41 bcm53xx: support LEDs on Buffalo devices 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43616
 2014-12-11 11:23:26 +00:00
Luka Perkov
9a74026206 kirkwood: add 3.18 support 
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43613
 2014-12-11 01:20:41 +00:00
Rafał Miłecki
40d94a3ef0 bcm53xx: backport NVRAM driver sent upstream 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43612
 2014-12-10 21:50:57 +00:00
Rafał Miłecki
ba81966001 bcm53xx: use bcma callback in SPROM driver to fill the SPROM 
This is required because it has to be called at very precise moment. See
comment in driver for details.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43611
 2014-12-10 21:24:11 +00:00
Rafał Miłecki
b0b43e1ef9 bcm53xx: use static NVRAM pointer for now 
This will allow us to sync with code sent for upstream.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43608
 2014-12-10 19:56:56 +00:00
Luka Perkov
a1da38f7b1 kernel: drop CONFIG_PROC_DEVICETREE in 3.18 
This option was removed in upstream commit 8357041.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43607
 2014-12-10 18:55:53 +00:00
Rafał Miłecki
960130e99c bcm53xx: clean up nvram header 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43606
 2014-12-10 18:29:26 +00:00
Luka Perkov
fa5f896cb7 kernel: add missing config symbols for 3.18 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43605
 2014-12-10 18:13:34 +00:00
Rafał Miłecki
7093580424 bcm53xx: move SPROM driver to the target files 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43604
 2014-12-10 18:07:01 +00:00
Rafał Miłecki
27a91a99d9 bcm53xx: move NVRAM driver to the target files 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43603
 2014-12-10 18:01:24 +00:00
Rafał Miłecki
3fab0d818c bcm53xx: move NVRAM header to the target files 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43602
 2014-12-10 17:37:24 +00:00
John Crispin
9432cbd577 oxnas: add support for 2nd S-ATA port to sata_oxnas driver 
similar to mv_sata, use nr-ports attribute from device tree.
import and adapt locking code from vendor GPL sources.
add dma controller handling, it may be used in future to avoid
full core resets similar to the vendor SDK's "progressive cleanup"
function.

this is still very dirty and aimed to first of all do things
quite exactly like the reference code. and it somehow works.
obviously there is lots of room for improvement :)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43598
 2014-12-10 15:51:07 +00:00
John Crispin
1fa7c8587d oxnas: add copyright header to sata_oxnas 
sata_oxnas.c is obviously a refactored version of sata_ox820.c
which does contain this header.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43597
 2014-12-10 15:51:00 +00:00
Luka Perkov
fd492354bb kernel: refresh patches 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43591
 2014-12-09 23:29:52 +00:00