Commit graph

72 commits

Author SHA1 Message Date
Rafał Miłecki
f20ba0f0d5 brcm47xx: image: use append-rootfs step for per-device rootfs support
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-28 17:03:55 +02:00
Rafał Miłecki
027b2c5b83 brcm47xx: image: make TRX steps work with rootfs passed as $@
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-28 16:46:57 +02:00
Rafał Miłecki
8bd2167236 brcm47xx: image: make linksys-pattern-partition leave specific file
Thanks to leaving .pattern file we can easily insert extra step between
linksys-pattern-partition and trx-v2-with-loader, e.g. rootfs one.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-28 16:41:05 +02:00
Rafał Miłecki
bc6be3e953 brcm47xx: add support for per-device rootfs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-27 13:25:51 +02:00
Rafał Miłecki
13e6f7a75d brcm47xx: reorder older entries in image Makefile
Keep all entries sorted and replace tabs with spaces while at it.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-24 20:35:24 +02:00
Rafał Miłecki
6e64a38b00 brcm47xx: build also TRX image for Linksys WRT300N V1
Linksys WRT300N V1 has pretty bugged CFE bootloader (it crashes in a lot
of situations) that doesn't accept .bin image.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-24 10:34:59 +02:00
Rafał Miłecki
337f219130 brcm47xx: open code Makefile entries for all devices
If we want to use some of new features like per device rootfs we will
need this to specify them there.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-24 10:33:33 +02:00
Felix Fietkau
63b525dd6b image: add a helper variable for getting kernel/rootfs from within image Build/* templates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 12:25:25 +02:00
Rafał Miłecki
210803df03 brcm47xx: image: create standard TRX images using new building system
Apart from using our new building system there are 2 more changes:

1) Limit amount of images
So far we were generating all standard images (optimized one and two
with no loader) for every SUBTARGET. This is not needed, as e.g. the
only device requiring gzipped kernel is legacy Huawei E970.

2) Change output names
The new image building system requires specifying device name. This
forced picking some and resulted in:
openwrt-brcm47xx-$(SUBTARGET)-squashfs.trx
openwrt-brcm47xx-$(SUBTARGET)-squashfs-gz.trx
openwrt-brcm47xx-$(SUBTARGET)-squashfs-noloader-nodictionary.trx
becoming:
openwrt-brcm47xx-$(SUBTARGET)-standard-squashfs.trx
openwrt-brcm47xx-$(SUBTARGET)-standard-noloader-gz-squashfs.trx
openwrt-brcm47xx-$(SUBTARGET)-standard-noloader-nodictionarylzma-squashfs.trx

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49006
2016-03-11 21:31:34 +00:00
Rafał Miłecki
4e6e23582b brcm47xx: image: move disabled devices to the new building system
This only drops WGR614 V9 which has 2 MiB flash and it's unlikely to get
any interest.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48975
2016-03-09 06:34:29 +00:00
Rafał Miłecki
9a6ad203f6 brcm47xx: image: switch Linksys WRT54G3GV2-VF to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48974
2016-03-09 06:34:25 +00:00
Rafał Miłecki
ee76a07fbf brcm47xx: image: switch Netgear WGT634U to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48973
2016-03-08 18:33:25 +00:00
Rafał Miłecki
0d3da888d2 brcm47xx: image: switch rest of 64k block devices to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48972
2016-03-08 18:33:22 +00:00
Rafał Miłecki
5e2930a888 brcm47xx: image: switch Motorola devices to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48971
2016-03-08 18:33:19 +00:00
Rafał Miłecki
6eb0df3543 brcm47xx: image: switch D-Link DWL-3150 to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48970
2016-03-08 18:33:16 +00:00
Rafał Miłecki
db7f2d9531 brcm47xx: add Netgear WN2500RP support
We generate V1 image only for now. We lack buttons support for V2.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47682
2015-12-02 09:24:52 +00:00
Hauke Mehrtens
5caee877dc brcm47xx: increase max image size
the trx utile uses a maximum image size of 7.2MB. There are brcm47xx
devices even with serial flash with bigger flash chips, but OpenWrt was
not able to create images for these devices. This patch provides an
additional parameter which increases this limit to 32 MB. There is a
warning in the trx utile code which suggests that bigger images could
overwrite the nvram partition on some devices, but normally the program
writing the image should make sure that it is safe to write it to the
flash.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46872
2015-09-11 17:55:28 +00:00
Hauke Mehrtens
c9bebfb9ce brcm47xx: break long lines in image Makefile
This patch changes nothing on the behaviour, it just breaks long lines
with bin/trx to make it easier to add additional parameters.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46871
2015-09-11 17:54:55 +00:00
Rafał Miłecki
a9559efe43 brcm47xx: fix Linksys E1200 V2 image filename
Drop unwanted suffix (copy & paste mistake).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46742
2015-08-29 09:23:19 +00:00
Jonas Gorski
4ecae78c16 image.mk: replace all Build/netgear-chk with a generic implementation
Instead of letting each target define it themselves, create on in
include/image.mk and let the targets use it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46596
2015-08-14 13:05:14 +00:00
Jonas Gorski
bee065262a brcm47xx: prefix netgear specific device variables with NETGEAR_
Rename BOARD_ID to NETGEAR_BOARD_ID and REGION to NETGEAR_REGION.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46594
2015-08-14 13:04:22 +00:00
Rafał Miłecki
92ebd6fdbe brcm47xx: image: fix typo in Asus WL-500gP v2 fw file name
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45811
2015-05-28 19:53:59 +00:00
Rafał Miłecki
69aefc771f brcm47xx: build images for Asus devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45789
2015-05-27 15:37:05 +00:00
Jo-Philipp Wich
048f46a075 brcm47xx: use common image prefix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45779
2015-05-27 15:04:02 +00:00
Rafał Miłecki
f08a10f2b9 brcm47xx: build image for Asus RT-N66U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45774
2015-05-27 13:54:19 +00:00
Rafał Miłecki
c6f9582116 brcm47xx: image: use "-" separator for device version
This makes legacy subtarget follow two other.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45319
2015-04-09 05:40:37 +00:00
Rafał Miłecki
80971cd0f9 brcm47xx: image: use new (& fixed) FILESYSTEM variable for trx command
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45313
2015-04-08 09:50:57 +00:00
Rafał Miłecki
090a510576 brcm47xx: image: convert legacy Linksys & Netgear devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45184
2015-03-31 12:44:31 +00:00
Rafał Miłecki
4faba3cc2e brcm47xx: image: convert generic subtarget to the new images system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45183
2015-03-31 12:17:08 +00:00
Rafał Miłecki
3d481d31ed brcm47xx: image: convert all mips74k images to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45181
2015-03-31 11:26:50 +00:00
Rafał Miłecki
184c0af4e2 brcm47xx: image: add helpers for defining devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45180
2015-03-31 11:26:45 +00:00
Rafał Miłecki
6c1852cb26 brcm47xx: image: use standard KERNEL_IMAGE to avoid warnings
KERNEL_IMAGE is used as target rule so reusing the same name causes:
Makefile:326: warning: overriding recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: overriding recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'

Unfortunately this will cause copying vmlinux.lzma over and over like:
cp vmlinux.lzma FOO-kernel.bin
which is redundant on brcm47xx where we never modify kernel image.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45178
2015-03-31 08:56:08 +00:00
Rafał Miłecki
463a449f84 brcm47xx: update Linksys firmwares (add new E2500 versions)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45173
2015-03-31 07:26:22 +00:00
Rafał Miłecki
1751676c8b brcm47xx: convert Netgear WNDR3700 V3 to the new image building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45144
2015-03-29 19:53:11 +00:00
Rafał Miłecki
8e4b74b9fe brcm47xx: convert Linksys E1200 V2 to the new image building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45143
2015-03-29 18:15:38 +00:00
Rafał Miłecki
1020b84266 brcm47xx: add early support for WNDR3400 V3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43532
2014-12-07 00:58:40 +00:00
Rafał Miłecki
c84fe94b0d brcm47xx: add support for Netgear WGR614 V10
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43336
2014-11-20 22:15:21 +00:00
Rafał Miłecki
746b80f166 brcm47xx: image: create initramfs TRX nodictionary images
Signed-off-by: Stephen Parry <sgparry@mainscreen.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42889
2014-10-13 05:53:33 +00:00
Hauke Mehrtens
09739f8ba5 brcm47xx: image: build alternative TRX using less optimized LZMA
There is a group of devices that lzma-loader doesn't work with. They
simply hang at "Starting program at 0x80001000" which is really hard to
debug and we didn't find any solution for this for years.

Broadcom doesn't use lzma-loader on these devices anyway. They decided
to drop lzma-loader and use less optimal LZMA compression that can be
handled by CFE itself (it doesn't use dictionary).

So support these devices we will need kernel compressed with different
parameters and trx without a loader.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42205
2014-08-18 21:00:55 +00:00
Hauke Mehrtens
ba0b904d0b brcm47xx: image: update list of Netgear WNR* firmwares
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42165
2014-08-14 21:22:17 +00:00
Hauke Mehrtens
4632347879 brcm47xx: remove unneeded images from generic target
broadcom-wl now builds in the mips74k profile, so remove these chips
from the generic profile.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41546
2014-07-07 17:47:24 +00:00
Hauke Mehrtens
3597b7d456 brcm47xx: image: legacy: take over old devices images
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41530
2014-07-06 17:21:37 +00:00
Hauke Mehrtens
0eb3c26e7d brcm47xx: image: mips74k: take over some device images
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41529
2014-07-06 17:14:29 +00:00
Hauke Mehrtens
c3b3df1da8 brcm47xx: image: prepare for using mips74k subtarget
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41528
2014-07-06 17:14:06 +00:00
Hauke Mehrtens
b5d42bc111 brcm47xx: move current target to "generic" subtarget
This allows creating more subtargets and optimize builds per family.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41024
2014-06-05 21:23:58 +00:00
Hauke Mehrtens
1d878cabf2 brcm47xx: image: respect device flash block size
We should be more careful and don't generate 128K JFFS2 images for
devices with flashes using 64K blocks (nor the other way).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 40762
2014-05-14 10:08:56 +00:00
Hauke Mehrtens
4cd010a712 brcm47xx: image: document some defines arguments
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 40761
2014-05-14 10:08:22 +00:00
Hauke Mehrtens
c78e4fb220 brcm47xx: Add support for Huawei E970
This patch adds support for Huawei E970 wireless gateway devices.
It has been tested on an E970 labelled as T-Mobile web'n'walk Box IV.
E960/B970 should work too, from what I know it's basically the same hardware.

The device has a Broadcom BCM5354 SoC and a built-in 3G USB modem.

It uses a hardware watchdog which needs GPIO-7 to be toggled at least
every 1-2 seconds. This patch uses gpio_wdt module (see my previous
patch today) to take care of this.

Tested and works:  3G wan,  wlan+LED,  VLAN config,  failsafe using reset
button,   image to be used for upgrade from OEM firmware's web interface

Link to the wiki page I've created:  <http://wiki.openwrt.org/toh/huawei/e970>

Issue:

* lzma-loader crashes, so gzipped kernel is used. Presumably due to watchdog
  reset during kernel decompress.

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>

SVN-Revision: 38011
2013-09-16 21:09:10 +00:00
Florian Fainelli
6a4f2922f6 targets: prepare for supporting normal and initramfs images
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
Hauke Mehrtens
ca7f9638d5 broadcom-diag: support for the WNDR3700v3
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it
was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and
LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the
bootloader and stock firmware will accept.

The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving
its LEDs through an HC164 8-bit shift register.

Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 36482
2013-04-28 21:11:17 +00:00