Commit graph

124 commits

Author SHA1 Message Date
John Crispin
99414dbcf1 ramips: Add support for Xiaomi MiWiFi Nano
Xiaomi MiWiFi Nano is based on Mediatek MT7628 with 64MB ram 16MB flash

Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com>

v3  includes changes suggested by L. D. Pinney & Karl Palsson-
Eliminate en25q64 (4MB) flash chip
Alphabetization
Remove hyphen in model
Rename profile from miwifinano.mk to xiaomi.mk
Add gpios that are attached to leds

SVN-Revision: 49024
2016-03-16 09:26:48 +00:00
Felix Fietkau
fb1273dfdd ar71xx: PowerCloud CR5000 openwrt configuration
OpenWrt configuration part of support for the PowerCloud Systems
CR5000.  The CR5000 is a dual-band 802.11n wireless router with
8MB flash, 64MB RAM, (unused on stock firmware) USB 2.0 port and
five port gigabit ethernet switch.  The CR5000 was sold as
hardware for the Skydog cloud-managed router service.

    Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47946
2015-12-19 11:28:18 +00:00
Felix Fietkau
59fc337a9a ar71xx: PowerCloud CR3000 OpenWrt configuration
OpenWRt configuration part of support for the PowerCloud
Systems CR3000.  The CR3000 is a 802.11n 2.4 GHz wireless router with
8MB flash, 64MB RAM, a four port gigabit ethernet switch, and a fast
ethernet wan port that was sold by PowerCloud Systems as
hardware for the Skydog cloud-managed router service.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47945
2015-12-19 11:28:12 +00:00
Felix Fietkau
abc1faad0b ar71xx: PowerCloud CAP324 OpenWrt configuration
Openwrt configuration part of support for PowerCloud CAP324
Cloud AP.  The CAP324 Cloud AP is a device sold by PowerCloud Systems
who's stock firmware (CloudCommand) provides 'cloud' based managment
of large numbers access points.

The CAP324 is a dual-band 802.11n wireless access point with 16MB flash
and 128MB RAM and single gigabit ethernet port.  It can be powered via PoE
or a wall wart.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 47944
2015-12-19 11:27:59 +00:00
John Crispin
1f9cd871f7 uboot-envtools: add support for linkits7688d
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47500
2015-11-18 15:00:38 +00:00
Luka Perkov
2f8ebe10b9 uboot-envtools: kirkwood: fix EA35/4500 board names
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47457
2015-11-11 12:48:29 +00:00
Luka Perkov
3ef14d0c3d kirkwood: rework Linksys EA[34]500 DTS
- Use board engineering names rather than marketing names

- Linksys uses a dual firmware layout, where the bootloader
  will switch to the other stored image when one fails to
  boot three consecutive times.

  In order to make this firmware compatible with the factory
  images and the stock bootloader we must match this layout.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47429
2015-11-10 00:16:24 +00:00
Felix Fietkau
b8b4d36379 uboot-envtools: fix various compile breakage issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47383
2015-11-04 22:17:40 +00:00
Imre Kaloz
1345073268 uboot: create the uboot config file for the shelby as well
fixes #20827

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 47365
2015-11-03 11:07:30 +00:00
Luka Perkov
e920d31f4b uboot-envtools: update to 2015.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 47328
2015-10-31 19:46:56 +00:00
John Crispin
51dd991d39 ramips: add LinkIt Smart7688 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47203
2015-10-19 10:07:38 +00:00
Luka Perkov
c2425ac649 uboot-envtools: Add Gateworks Ventana Support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 47167
2015-10-10 12:34:45 +00:00
John Crispin
b26840a9fc uboot_envtools: add P2812HNUF1
Add generation of /etc/fw_env.config for P2812HNUF1

Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>

SVN-Revision: 47133
2015-10-05 10:28:39 +00:00
John Crispin
e3f4a3d22a package/uboot-envtools: add OpenMesh MR1750 support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46931
2015-09-14 20:11:43 +00:00
Felix Fietkau
102522e0cd uboot-envtools: disable AES support, reduces code size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45615
2015-05-06 00:59:28 +00:00
Imre Kaloz
2705cda813 mvebu: add support for the Linksys Caiman and Cobra
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45456
2015-04-16 09:54:39 +00:00
Imre Kaloz
b0ad24f0d5 mvebu: migrate mamba support to the upstreamed code
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45400
2015-04-12 17:29:50 +00:00
Nicolas Thill
fe46689f10 packages: use $(LN) macro, make symlinks relative
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 45250
2015-04-03 00:07:43 +00:00
Felix Fietkau
9314180c34 uboot-envtools: add ramips wsr-600/1166 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44897
2015-03-19 21:00:41 +00:00
John Crispin
37a4102423 package/uboot-envtools: add OpenMesh OM5P-AN support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44865
2015-03-17 09:43:52 +00:00
Luka Perkov
71f96048e6 package: uboot-envtools: add nbg6716 to appropriate group
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44308
2015-02-07 19:59:08 +00:00
Luka Perkov
64653e6373 uboot-envtools: fix Linksys EA3500 env size
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 44037
2015-01-18 16:45:11 +00:00
Luka Perkov
180c1f3302 uboot-envtools: add more kirkwood boards
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43747
2014-12-18 15:53:46 +00:00
John Crispin
f8e83b1057 uboot-envtools: enable UBI support per default on oxnas
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43716
2014-12-15 10:37:09 +00:00
John Crispin
6ad5109211 uboot-envtools: use environment stored in UBI also for KD20
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43510
2014-12-03 16:05:23 +00:00
Luka Perkov
c25e55d851 uboot-envtools: bump to 2014.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43433
2014-11-30 01:14:17 +00:00
Luka Perkov
44d5800fe1 uboot-*: update license info in uboot packages
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43429
2014-11-29 23:45:53 +00:00
John Crispin
de49133a8b uboot-envtools: add support for oxnas target
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43390
2014-11-26 09:00:40 +00:00
John Crispin
d265ebd1dc uboot-envtools: add carambola2 support
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 43317
2014-11-19 13:49:54 +00:00
John Crispin
7dce745a99 package/uboot-envtools: add OpenMesh MR900v2 support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43269
2014-11-14 16:55:26 +00:00
John Crispin
c126266f43 package/uboot-envtools: add OpenMesh MR900 support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43263
2014-11-14 16:54:45 +00:00
Luka Perkov
4f1a9470f0 kirkwood: add support for Linksys EA3500
http://wiki.openwrt.org/toh/linksys/ea3500

Signed-off-by: Dan Walters <dan@walters.io>

SVN-Revision: 43230
2014-11-10 23:55:10 +00:00
John Crispin
74a3a77bcd license info - revert r43155
turns out that r43155 adds duplicate info.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43167
2014-11-03 09:56:44 +00:00
John Crispin
c10d97484a Add more license tags with SPDX identifiers
Note, that licensing stuff is a nightmare: many packages does not clearly
state their licenses, and often multiple source files are simply copied
together - each with different licensing information in the file headers.

I tried hard to ensure, that the license information extracted into the OpenWRT's
makefiles fit the "spirit" of the packages, e.g. such small packages which
come without a dedicated source archive "inherites" the OpenWRT's own license
in my opinion.

However, I can not garantee that I always picked the correct information
and/or did not miss license information.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43155
2014-11-03 08:01:08 +00:00
John Crispin
24a0269b71 ar71xx: qihoo-c301: reset imageNtrynum after each successful boot.
Qihoo C301 has 2 flash chips of which one is used as primary and the
other is used as backup.  OEM U-Boot will try to boot an activeregion N
with imageNstatus=0 and imageNtrynum <= imagemaxtry.  If such a region
is found, bootloader will try to increment imageNtrynum and boot it.

This patch tries to reset imageNtrynum after each successful boot (if
the boot process reaches the execution of /etc/init.d/done).

	root@OpenWrt:/# hexdump -C -n 128 /dev/mtdblock9
	00000000  9e f3 63 91 61 63 74 69  76 65 72 65 67 69 6f 6e  |..c.activeregion|
	00000010  3d 31 00 69 6d 61 67 65  31 73 74 61 74 75 73 3d  |=1.image1status=|
	00000020  30 00 69 6d 61 67 65 32  73 74 61 74 75 73 3d 30  |0.image2status=0|
	00000030  00 69 6d 61 67 65 32 74  72 79 6e 75 6d 3d 30 00  |.image2trynum=0.|
	00000040  69 6d 61 67 65 6d 61 78  74 72 79 3d 33 00 69 6d  |imagemaxtry=3.im|
	00000050  61 67 65 31 74 72 79 6e  75 6d 3d 30 00 00 00 00  |age1trynum=0....|
	00000060  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42914
2014-10-14 12:21:36 +00:00
Luka Perkov
61d83b3a2f uboot-envtools: bump to 2014.07
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42078
2014-08-08 15:14:26 +00:00
John Crispin
596ff29ade package/uboot-envtools: add OpenMesh OM5P support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 41774
2014-07-20 17:31:00 +00:00
Gabor Juhos
f6a334c6c1 package/uboot-envtools: add support for the EnGenius EAP300 v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41660
2014-07-14 21:30:29 +00:00
Gabor Juhos
ddd5a9a8f2 package/uboot-envtools: add support for the Tube2H board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41651
2014-07-14 16:03:36 +00:00
John Crispin
1475263d5c lantiq: configure uboot-envtools on BTHOMEHUBV2B and make it work correctly on other lantiq boards
Generate the configuration file for uboot-envtools
on BTHOMEHUBV2B. Adds the specific parameters for the
BTHOMEHUBV2B and also fixes an incorrect path which
would have affected other lantiq boards as well
(currently only the GIGASX76X).

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41597
2014-07-13 07:17:54 +00:00
Imre Kaloz
a91b9e35a4 add mvebu support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41380
2014-06-29 12:38:35 +00:00
Luka Perkov
e575c759ca uboot-envtools: use new scripts from /lib/ to match boards
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41340
2014-06-26 10:14:14 +00:00
John Crispin
8a82c2cd36 uboot-envtools: fix build if ubi volume support is disabled
Insert a missing #ifdef UBI around the use of libubi_close().
As the preceding if (libubi) will never be true on non-UBI builds,
compiling only failed when disabling optimization.

Also rebase patch to latest u-boot.git HEAD.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 41313
2014-06-24 18:12:56 +00:00
John Crispin
1a6a14c757 package/uboot-envtools: add OpenMesh OM2P-HSv2 support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 40965
2014-06-02 13:21:47 +00:00
John Crispin
f777b06875 package/uboot-envtools: add OpenMesh OM2Pv2 support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 40959
2014-06-02 13:21:17 +00:00
John Crispin
dab35f044a uboot-envtools: add support for environment in ubi volume
On UBI enabled devices, U-Boot might store it's environment on
UBI volume(s). Support this in uboot-envtools, so fw_setenv and
fw_printenv can work on these platforms.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 40929
2014-06-02 12:44:19 +00:00
Luka Perkov
591b5285f5 uboot-envtools: add support for kirkwood ea4500
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40872
2014-05-28 21:43:42 +00:00
Luka Perkov
2381f4a7b0 uboot-envtools: add Pogoplug E02 support
The settings require that the OpenWrt provided u-boot is used as either
first or second stage bootloader as it modifies the partitioning scheme
to move the u-boot environment to a separate mtd partition.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 40829
2014-05-23 08:17:02 +00:00
Luka Perkov
740ed0ede4 uboot-envtools: update to 2014.04
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40778
2014-05-19 16:41:24 +00:00
Gabor Juhos
daca4351b1 uboot-envtools: add support for the ZyXEL NBG6716 board
Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40501
2014-04-13 08:29:08 +00:00
Felix Fietkau
fbda3388f9 uboot-envtools: fix build with musl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39961
2014-03-20 13:51:27 +00:00
Nicolas Thill
ece85d2d25 uboot-envtools: pass target cflags
SVN-Revision: 39629
2014-02-18 22:11:24 +00:00
Luka Perkov
ad48ba11db uboot-envtools: add support for wndr3700
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39380
2014-01-24 00:07:48 +00:00
Zoltan Herpai
dcd8a08be1 uboot-envtools: add support for mxs target
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 38776
2013-11-12 10:07:03 +00:00
Felix Fietkau
e31ccd95c7 u-boot: prefer mirror2.openwrt.org over ftp.denx.de - the denx ftp is slow and unreliable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38559
2013-10-28 15:15:05 +00:00
Luka Perkov
494bc1d026 uboot-envtools: update to 2013.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38444
2013-10-18 00:39:28 +00:00
Luka Perkov
c15bec4a1b uboot-envtools: update kirkwood scripts
Also, scripts can be installed as data so let's change that here too.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38403
2013-10-14 19:46:43 +00:00
Luka Perkov
cdd6361649 uboot-envtools: update to v2013.07
SVN-Revision: 37857
2013-08-29 23:06:29 +00:00
Luka Perkov
32b80b8653 uboot-env: fix spurious esac within ramips uci-defaults
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 37814
2013-08-19 13:01:17 +00:00
Luka Perkov
e8d6de95b3 uboot-envtools: add support for hornet-ub-x2
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37789
2013-08-15 00:57:48 +00:00
Luka Perkov
af9d30f713 uboot-env: add config for the ALFA NETWORKS Hornet-UB (AP121U)
Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 37382
2013-07-17 17:31:21 +00:00
Luka Perkov
2b6519b8c2 uboot-envtools: add support for imx6 target
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37136
2013-07-02 23:08:19 +00:00
Luka Perkov
d352ff6cac uboot-envtools: upgrade to 2013.07-rc1
Support for writing on MMC devices has been added.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37135
2013-07-02 23:08:17 +00:00
Luka Perkov
3b1c133d1d uboot-envtools: upgrade to 2013.04
SVN-Revision: 36665
2013-05-20 08:52:44 +00:00
Luka Perkov
b591e15f36 This adds Gateworks Laguna family board support. Note that some Laguna boards have SPI flash and others have NOR flash, thus the size/erasesize are detected dynamically.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 36313
2013-04-11 16:04:31 +00:00
Luka Perkov
fe24afe37f uboot-envtools: upgrade to version 2013.01.01
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 36033
2013-03-15 01:36:53 +00:00
Luka Perkov
6337803d65 uboot-env: wzr-600dhp uses wzr-hp-ag300h name
SVN-Revision: 35866
2013-03-03 21:59:35 +00:00
Luka Perkov
107e0c6d1f ar71xx: add support for Buffalo WZR 600DHP
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 35840
2013-03-01 13:46:01 +00:00
Gabor Juhos
b01e744632 uboot-envtools: add config for the Edimax BR-6425 board
Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35464
2013-02-02 17:01:52 +00:00
Gabor Juhos
a2a5f9b405 package/uboot-envtools: add OpenMesh MR600v2 support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35432
2013-02-01 15:50:52 +00:00
Gabor Juhos
21393323d0 package/uboot-envtools: add OpenMesh MR600 support
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34236
2012-11-18 09:32:40 +00:00
Gabor Juhos
5a6a2e55b9 package/uboot-envtools: add CAP4200AG support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33959
2012-10-27 08:55:41 +00:00
Gabor Juhos
6e6e72470d uboot-envtools: OM2P-HS partition information
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33802
2012-10-17 08:26:04 +00:00
John Crispin
e75106aa0d move boot related packages to their own folder
SVN-Revision: 33781
2012-10-16 13:44:25 +00:00