KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
31207 commits 3 branches 0 tags 154 MiB
Commit graph

13874 commits

Author SHA1 Message Date
Felix Fietkau
c73adc80a3 bcm53xx: add profiling support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45480
 2015-04-17 18:52:15 +00:00
Luka Perkov
22045c383d imx6: put uboot-envtools in DEFAULT_PACKAGES 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45478
 2015-04-17 13:47:13 +00:00
Luka Perkov
cc8628a6a3 kirkwood: put uboot-envtools in DEFAULT_PACKAGES 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45477
 2015-04-17 13:47:09 +00:00
Rafał Miłecki
9c02b23a77 brcm47xx: add buttons support for WRT310N v2 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45474
 2015-04-17 08:12:00 +00:00
Rafał Miłecki
9e03c36259 bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45473
 2015-04-17 06:03:00 +00:00
Rafał Miłecki
b12e85a451 brcm47xx: fix handling absolute paths in sysupgrade (for vendor formats) 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45472
 2015-04-17 05:45:46 +00:00
Rafał Miłecki
e85294a957 brcm47xx: rework vendor fw handling to don't duplicate upgrade calls 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45470
 2015-04-16 21:43:27 +00:00
Rafał Miłecki
c8eed9a50a brcm47xx: explicitly select CPU_MIPS32_R2 and CPU_MIPSR2 for mips74k 
The mips74k subtarget of brcm47xx configures gcc to compile for mips32r2;
however, the generated kernel config for 3.14 and later kernels ends up
with CPU_MIPS32_R1 and CPU_MIPSR1 selected.  The generated kernel config
for the 3.10 kernel (Barrier Breaker) properly selected CPU_MIPS32_R2 and
CPU_MIPSR2.  Modify the default kernel config for mips74k to explicitly
select CPU_MIPS32_R2 and CPU_MIPSR2.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45469
 2015-04-16 21:20:37 +00:00
Felix Fietkau
582b20c4e2 kernel: accidentally committed a few patches in the wrong place, move them 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45468
 2015-04-16 20:43:11 +00:00
Felix Fietkau
b860db2c63 bcm53xx: add power button for WXR-1900DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45467
 2015-04-16 20:09:55 +00:00
Felix Fietkau
c9aeb21405 bcm53xx: add power button for Buffalo WZR-1750DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45466
 2015-04-16 20:09:48 +00:00
Felix Fietkau
a7f768bdc8 bcm53xx: add USB LED for Buffalo WZR-1750DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45465
 2015-04-16 20:09:42 +00:00
Felix Fietkau
f6cbbe1332 bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45464
 2015-04-16 20:09:36 +00:00
Felix Fietkau
d51420eedc bcm53xx: increate trx maxlen to prevent build failures with bigger images 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45461
 2015-04-16 20:09:15 +00:00
Felix Fietkau
f8d499fd3f bcm53xx: fix WXR-1900DHP power led name and add usb led 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45460
 2015-04-16 20:09:08 +00:00
Luka Perkov
76330e9b57 mvebu: better integrate xp-gp 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45459
 2015-04-16 13:53:57 +00:00
Felix Fietkau
c64fdadea7 bcm53xx: make use of the new board detection layer 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45458
 2015-04-16 12:18:34 +00:00
Imre Kaloz
2705cda813 mvebu: add support for the Linksys Caiman and Cobra 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45456
 2015-04-16 09:54:39 +00:00
Luka Perkov
0926e4c22f mvebu: bring back CONFIG_CPU_THERMAL 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45455
 2015-04-16 00:23:34 +00:00
Luka Perkov
a635c0a04e mvebu: refresh kernel config 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45454
 2015-04-16 00:10:42 +00:00
Luka Perkov
dade4535bb mvebu: fix typo in marvell profile 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45453
 2015-04-15 16:23:20 +00:00
Luka Perkov
a046ce235f mvebu: better integrate 385-ap-db 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45452
 2015-04-15 16:23:10 +00:00
Felix Fietkau
147e005fcf bcm53xx: add USB 2.0 power control for WXR-1900DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45451
 2015-04-15 16:06:20 +00:00
Felix Fietkau
83e31eb7e7 bcm53xx: add USB 2.0 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45450
 2015-04-15 16:06:14 +00:00
Rafał Miłecki
3edb55143d bcm53xx: add (disabled) support for upgrading kernel during sysupgrade 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45445
 2015-04-14 20:50:59 +00:00
Rafał Miłecki
3cb8bf44e6 otrx: change command line API to start with a mode 
This will allow adding more modes without options conflict.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45443
 2015-04-14 20:50:46 +00:00
John Crispin
911cf6da60 ar71xx: Enable AT803X_PHY to set special flags 
Open-Mesh OM5P-AN use a AT8035 (F1E) behind one of the ethernet ports. This PHY
requires special flags to work correctly. Otherwise massive packet loss happens
with active POE or when switching the link speed from gigabit ethernet to fast
ethernet. The generic PHY doesn't have support to change these settings.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 45439
 2015-04-14 19:00:57 +00:00
John Crispin
efbdc168ff ar71xx: fix ethernet packet loss issues on OM5P-AN 
The OM5P-AN boards are suffering from ethernet packet loss when booting with
some active POE setups or when switching to Fast Ethernet when previously
booted with Gigabit ethernet attached.

The cause of the problem is that the AR8035 PHYs requires special register
settings to work reliably on these boards. Enable the RGMII TX, RX delays and
disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV
delay in the ETH_CFG register to fix the issue.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 45438
 2015-04-14 19:00:51 +00:00
Felix Fietkau
5c9c670616 kernel: update bgmac patches to the latest version submitted 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45431
 2015-04-14 12:17:20 +00:00
Felix Fietkau
923bef1678 bcm53xx: refresh kernel patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45426
 2015-04-13 22:23:37 +00:00
Felix Fietkau
d0ba3bb1e2 kernel: finally remove layer7 filter support 
it has been non-functional for years and caused numerous memleaks and
crashes for people that tried to enable it.
it has no maintained upstream source, and it does not look like it's
going to be fixed any time soon

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45423
 2015-04-13 22:23:14 +00:00
Felix Fietkau
87f854059a kernel: fix more bgmac dma init/cleanup issues 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45422
 2015-04-13 20:08:30 +00:00
Imre Kaloz
232c61742e mvebu: copy the initramfs files to the bin dir 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45421
 2015-04-13 20:06:47 +00:00
Felix Fietkau
1bf8e555bb kernel: sync bgmac changes with latest upstream submission 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45420
 2015-04-13 17:32:33 +00:00
Felix Fietkau
24e9f52106 bcm53xx: add support for the Buffalo WXR-1900DHP 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45419
 2015-04-13 17:32:25 +00:00
Felix Fietkau
1e48a48915 bcm53xx: fix GPIO pins > 16 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45418
 2015-04-13 17:32:18 +00:00
Felix Fietkau
6bc743ef6f kernel: add bgmac fixes for bcm53xx (fix ethernet bringup on a bcm4709 based device) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45417
 2015-04-13 17:32:12 +00:00
Felix Fietkau
1f70f452cc bcm53xx: add missing l2 cache controller AUXCTL bit 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45416
 2015-04-13 17:32:05 +00:00
Imre Kaloz
8c684f42e5 mvebu: add support for the in-CPU RTC on the Armada 38x 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45415
 2015-04-13 13:06:34 +00:00
Imre Kaloz
c9e6c7c836 mvebu: add comments to image generation 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45414
 2015-04-13 12:15:40 +00:00
Imre Kaloz
e3bd4f0969 mvebu: stop legacy image generation 
If you can't find the firmware for you board, send proper patches.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45413
 2015-04-13 12:08:42 +00:00
Imre Kaloz
96c793f529 mvebu: generate a single firmware for the 385-db-ap 
This has been done without having a board, but should work.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45412
 2015-04-13 12:06:56 +00:00
Imre Kaloz
4da8f96754 mvebu: reflect Armada 38x support in the name 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45411
 2015-04-13 11:30:39 +00:00
Felix Fietkau
d24388da44 bcm53xx: add a comment about the gpio base patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45408
 2015-04-12 22:10:44 +00:00
Felix Fietkau
afafbc0d74 kernel: bgmac: add more DMA related fixes 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45407
 2015-04-12 22:10:40 +00:00
Imre Kaloz
09722d0bdc ppc40x: upgrade to 3.18 
left "broken" as I'm not sure if my only board is to blame.. testers welcomed

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45406
 2015-04-12 20:48:13 +00:00
Imre Kaloz
e55532b7af orion: upgrade to 3.18 (compile tested only) 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45405
 2015-04-12 20:45:55 +00:00
Rafał Miłecki
77c75e6fa3 bcm53xx: try to handle Netgear R8000 VLANs config 
It seems to have few ports connected to CPU (only for CPU sending data?)
as part of "SMP dual core 3 GMAC setup" feature.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45403
 2015-04-12 20:11:25 +00:00
Rafał Miłecki
06ac2f5c74 b53: improve overriding CPU port state on BCM5301X 
On BCM5301X there are two different cases to handle: CPU port 8 vs. any
other one. Support for CPU port 8 was already partially implemented but
it lacked setting some extra bit for 2G speed. It also will need to be
extended to implement "SMP dual core 3 GMAC setup". That's the reason
for handling it in separated code block.
This patch also adds overriding CPU port state for port other than 8. It
requires using recently defined GMII_PORT registers.
It was tested for regressions on BCM53011 revs 2 & 3. It was also
confirmed to fix switch on some internal Broadcom board.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45402
 2015-04-12 20:00:42 +00:00
Imre Kaloz
ceb7321e13 mvebu: refresh patches 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45401
 2015-04-12 17:30:41 +00:00