Commit graph

9980 commits

Author SHA1 Message Date
John Crispin
bc7b310959 move memory detect node to dtsi files
Signed-of-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36290
2013-04-09 14:19:36 +00:00
John Crispin
48feea4861 Add Netgear WNCE2001 (OF version)
Add Netgear WNCE2001.

This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.

Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming

The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.

The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.

http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36289
2013-04-09 14:19:33 +00:00
John Crispin
e468abcae0 remove bootargs from dts
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36288
2013-04-09 14:19:28 +00:00
John Crispin
82c3b7ce26 add ofpart info to the devicetrees
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36287
2013-04-09 14:19:24 +00:00
John Crispin
f1e9d30ffc add sample swconfig portmap
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36286
2013-04-09 14:19:20 +00:00
John Crispin
fcd962cc71 set of_node before registring the switch
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36285
2013-04-09 14:19:17 +00:00
John Crispin
fff58a5801 allow loading port maps from OF
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36283
2013-04-09 14:19:09 +00:00
Steven Barth
ea94d66b0f Adapt default network configuration for IPv6
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
Gabor Juhos
130f67210a ramips: TEW-691GR.dts fixes
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36276
2013-04-08 12:34:17 +00:00
Gabor Juhos
a4a148f222 ramips: rt3883: enable the AR8216 driver
It is needed for the TEW-69{1,2}GR boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36275
2013-04-08 12:34:15 +00:00
Gabor Juhos
a9d977b2af ramips: add profile for the Omnima EMB-HPM board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36274
2013-04-08 11:12:04 +00:00
Gabor Juhos
82705b30b3 ramips: OMNI-EMB-HPM.dts fixes
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36273
2013-04-08 11:12:03 +00:00
Gabor Juhos
909fabe574 ramips: add mdio-bus node to rt3883.dtsi
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36272
2013-04-08 11:12:02 +00:00
Gabor Juhos
78ee80f2e8 ramips: fix MDIO/PHY handling
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36271
2013-04-08 11:12:01 +00:00
Gabor Juhos
30e5bae84a ramips: fix console speed for OMNI-EMB-HPM
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36270
2013-04-08 08:24:51 +00:00
Gabor Juhos
cd7ce5226d ramips: avoid invalid pointer dereference in pinmux code
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36269
2013-04-08 08:24:50 +00:00
Gabor Juhos
4c85227cf4 ramips: TEW-692GR.dts fixes
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36268
2013-04-08 07:11:35 +00:00
Gabor Juhos
97635d7a8e ramips: add PCI node into RTN56U.dts
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36264
2013-04-07 20:56:22 +00:00
Gabor Juhos
474264f64c ramips: add PCI node for rt3883.dtsi
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36263
2013-04-07 20:56:21 +00:00
Gabor Juhos
6c8951313c ramips: rt3883: enable PCI support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36262
2013-04-07 20:56:20 +00:00
Gabor Juhos
b6b0a8fbee ramips: fix RT3883 PCI driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36261
2013-04-07 20:56:18 +00:00
Gabor Juhos
1700bf5b2e ramips: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36260
2013-04-07 17:05:05 +00:00
Gabor Juhos
6de8743e44 ramips: add missing cpu-feature-override.h files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36259
2013-04-07 17:05:04 +00:00
Gabor Juhos
68875710fd ramips: fix broken patch name
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36258
2013-04-07 16:26:27 +00:00
Gabor Juhos
16d0ce52b0 ramips: fix polarity of GPIO buttons for RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36257
2013-04-07 16:24:33 +00:00
Gabor Juhos
9e6ae6ab5d x86/generic: remove old kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36256
2013-04-07 15:53:17 +00:00
Gabor Juhos
0d0bfe3d41 x86/generic: switch to 3.8
Only tested within a VM.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36255
2013-04-07 15:53:15 +00:00
Gabor Juhos
f5d28ea3ce x86/generic: add config for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36254
2013-04-07 15:53:13 +00:00
Gabor Juhos
71a51e3b91 x86/alix2: remove old kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36253
2013-04-07 15:53:11 +00:00
Gabor Juhos
15d311ec18 x86/alix2: switch to 3.8
Tested on an alix2d13 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36252
2013-04-07 15:53:09 +00:00
Gabor Juhos
9d05b1b683 x86/alix2: add config for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36251
2013-04-07 15:53:08 +00:00
Gabor Juhos
89f690843f x86: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36250
2013-04-07 15:53:05 +00:00
Gabor Juhos
d1f28c6d1f ramips: add nor-flash node for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36249
2013-04-07 14:46:11 +00:00
Gabor Juhos
0c3c29ca38 ramips: fix pinmux settings for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36248
2013-04-07 14:46:10 +00:00
Gabor Juhos
66fbe78a93 ramips: pinmux fixes
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36247
2013-04-07 14:46:09 +00:00
Gabor Juhos
aedf05caa0 ramips: remove trailing whitespaces from dts files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36246
2013-04-07 13:32:37 +00:00
Gabor Juhos
017aabe292 ramips: handle PCI interrupts in plat_irq_dispatch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36245
2013-04-07 13:25:38 +00:00
John Crispin
811f7f9f2d fix typos inside dts files
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>

SVN-Revision: 36244
2013-04-07 11:47:03 +00:00
John Crispin
709b19ed9f fix default commandline in dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36243
2013-04-07 11:46:54 +00:00
Gabor Juhos
85675528da ramips: add cfi_cmdset_0002 patches
The parallel flash access on the RT-N56U is broken
without those patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36242
2013-04-07 11:37:15 +00:00
Felix Fietkau
fde143b66f cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36241
2013-04-07 11:24:30 +00:00
Gabor Juhos
10d8e4b66c ramips: remove top-level {address,size}-cells properties from .dts files
Those are defined in the SoC specific .dtsi files.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36237
2013-04-07 08:19:10 +00:00
Hauke Mehrtens
4a46687d25 brcm47xx: use old partition names again for kernel 3.8
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.

Thank you russell for spotting this problem.

SVN-Revision: 36235
2013-04-06 22:22:26 +00:00
Hauke Mehrtens
204bde8d98 brcm47xx: fix error in board detection when nvram is not available.
SVN-Revision: 36234
2013-04-06 19:02:25 +00:00
Gabor Juhos
d45ef216e6 linux/3.8: implement pcibios_get_phb_of_node for MIPS
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36233
2013-04-06 17:33:03 +00:00
Gabor Juhos
51fa28e2c2 linux/3.8: backport devm_ioremap_resource from 3.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36232
2013-04-06 17:33:00 +00:00
Gabor Juhos
756b810178 ramips: fix ethernet switch node in DIR-645.dts
Fix a typo in the node name and add vendor prefix
for the compatible string.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36231
2013-04-06 17:19:35 +00:00
Gabor Juhos
747b795b56 generic: rtl8367: add compatible string with vendor prefix
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36230
2013-04-06 17:19:31 +00:00
Gabor Juhos
f5d8d80ca9 generic: rtl8367b: fix rtl8367b_extif_init_of
* disable external interface if its property is not present
* show an error message if the extif property is not valid
* use proper error values intead of -1
* fix memory leak
* wrap long lines

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36229
2013-04-06 17:03:09 +00:00
Gabor Juhos
32d3b456f0 linux/3.8: add more missing symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36228
2013-04-06 16:56:47 +00:00