KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
37584 commits 3 branches 0 tags 154 MiB
Commit graph

38 commits

Author SHA1 Message Date
Hans Geiblinger
a43c503ec4 mvebu: set fan_ctrl.sh only on mamba 
Signed-off-by: Hans Geiblinger <cybrnook2002yahoo.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
 2017-01-24 16:21:25 +01:00
Paul Wassi
9641ceea0c mvebu: simplify etc/board.d/02_network 
Unify switch configuration on Linksys WRTxx00AC series.
LAN = eth0, WAN = eth1

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
[Álvaro]: also change WAN LEDs
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2017-01-13 17:12:40 +01:00
Kabuli Chana
fe876e9ac6 mvebu: Fix up some leds on this series 
correct ports, fix power led on rango, tested mamba,shelby,rango

Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
 2017-01-10 12:28:32 +01:00
Felix Fietkau
95e7868e7e Revert "mvebu: simplify etc/board.d/02_network" 
This reverts commit 539ae47103.
According to reports, this introduces a regression on WRT3200ACM

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 2016-11-25 20:03:45 +01:00
Paul Wassi
539ae47103 mvebu: simplify etc/board.d/02_network 
Unify switch configuration on Linksys WRTxx00AC series.
LAN = eth0, WAN = eth1

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
 2016-11-24 12:53:17 +01:00
Imre Kaloz
3764caa934 mvebu: add support for the Linksys WRT3200ACM (Rango) 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
 2016-10-24 08:45:06 +02:00
Imre Kaloz
2beab73fad mvebu: add missing status LEDs for Linksys WRT1200AC and WRT1900ACv2 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
 2016-10-24 08:45:06 +02:00
Jonas Gorski
27ed4e9c14 mvebu: add switch config for clearfog pro 
Check for switch0 existance and add default switch config if found.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
 2016-09-26 13:27:44 +02:00
Rujun Wang
1830c31632 mvebu: Configure status LED for WRT1900ACS 
Signed-off-by: Rujun Wang <chinawrj@gmail.com>
 2016-06-15 12:58:23 +02:00
Claudio Leite
35782e104a mvebu: configure switch on WRT1200AC and WRT1900ACv2/S 
Also collapses the three identical configurations into one block.

Signed-off-by: Claudio Leite <leitec@staticky.com>
 2016-05-23 13:39:50 +02:00
Luka Perkov
4d966e4dde mvebu: add SolidRun ClearFog A1 support 
Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr>

SVN-Revision: 48736
 2016-02-17 17:49:26 +00:00
Jo-Philipp Wich
67e1c87012 all: drop old uci-defaults.sh 
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
 2015-12-11 15:26:06 +00:00
Imre Kaloz
4707123fca mvebu: fixup wifi macs for Linksys boards 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 47820
 2015-12-10 12:13:16 +00:00
Jo-Philipp Wich
08848936dd all: remove redundant board.d/00_model files 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47753
 2015-12-04 11:07:06 +00:00
Jo-Philipp Wich
527ec2af59 all: remove dummy ucidef_set_interface_loopback() from board.d 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47744
 2015-12-03 23:13:00 +00:00
Jo-Philipp Wich
9b02e73188 board.d: merge ucidef_add_switch() and ucidef_add_switch_ports() 
This changes uci-defaults-new.sh, config_generate and all relevant board.d
files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into
a single function.

Also removes now superfluous enable and reset arguments.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47721
 2015-12-03 17:30:24 +00:00
Jo-Philipp Wich
fff1a82180 mvebu: switch network and led config defaults to board detection framework 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47674
 2015-11-30 10:43:31 +00:00
Jo-Philipp Wich
fc64fd8712 Revert "mvebu: migrate led and network setup to board detection framework" 
Roll back the mvebu conversion to board detection code as we need to fix
some strcutural issues first.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47597
 2015-11-22 20:52:10 +00:00
Jo-Philipp Wich
e20b689249 mvebu: migrate led and network setup to board detection framework 
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47541
 2015-11-20 23:59:31 +00:00
Imre Kaloz
8bb23cfb66 mvebu: add support for the Linksys WRT1900ACS (Shelby) 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 47164
 2015-10-08 10:01:30 +00:00
Imre Kaloz
20fac016e4 mvebu: add support for the Linksys boot counter 
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46690
 2015-08-19 08:31:23 +00:00
Imre Kaloz
9fb062cf93 mvebu: make flashing more safe 
Turn on the auto recovery feature when flashing
and turn it off on successful bootup.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45792
 2015-05-27 19:03:22 +00:00
Luka Perkov
76330e9b57 mvebu: better integrate xp-gp 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45459
 2015-04-16 13:53:57 +00:00
Imre Kaloz
2705cda813 mvebu: add support for the Linksys Caiman and Cobra 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45456
 2015-04-16 09:54:39 +00:00
Luka Perkov
a046ce235f mvebu: better integrate 385-ap-db 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45452
 2015-04-15 16:23:10 +00:00
Imre Kaloz
b0ad24f0d5 mvebu: migrate mamba support to the upstreamed code 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45400
 2015-04-12 17:29:50 +00:00
Imre Kaloz
6f01238398 mvebu: handle other SKUs as well 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45396
 2015-04-12 15:04:14 +00:00
Imre Kaloz
b95a9f01c1 mvebu: set default regdomain 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44908
 2015-03-20 12:15:40 +00:00
Imre Kaloz
e02478a22a mvebu: set default WRT1900AC switch config 
This sets 'enable_vlan' and thus uses 802.1q
VLANs, but without tagging on either interface.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44509
 2015-02-23 10:35:29 +00:00
Luka Perkov
81db848656 targets: base-files: diag.sh does not need to be executable 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44305
 2015-02-07 19:58:58 +00:00
Luka Perkov
92e6e80080 targets: files in uci-defaults do not need to be executables 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44304
 2015-02-07 19:58:52 +00:00
Imre Kaloz
7be967e954 mvebu: temporary el cheapo' fan control script 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44153
 2015-01-26 20:41:43 +00:00
Imre Kaloz
8a103d5c56 mvebu: fixups for the new driver 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43978
 2015-01-16 08:44:15 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument 
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
 2014-12-15 10:37:00 +00:00
Imre Kaloz
811d1682b8 enable handling of the wan led on the WRT1900AC 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41555
 2014-07-10 10:19:06 +00:00
Imre Kaloz
b7b222279c set led triggers for the Linksys WRT1900AC 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41436
 2014-07-01 09:45:41 +00:00
Imre Kaloz
d59f68531b use the power led on the WRT1900AC for status reporting 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41383
 2014-06-29 12:53:09 +00:00
Imre Kaloz
f953ed4ffb automatically generate network config 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41381
 2014-06-29 12:50:12 +00:00