Commit graph

29558 commits

Author SHA1 Message Date
John Crispin
da5001475c gemini: add basic nas4220 board support
Few notes:
- redboot partitions are unusable
- redboot declares only 16M of RAM, hence the mem arg in cmdline and separate kernel config
- boots fine but only ethernet works for now
- split wiliboard and raidsonic boards into different subtargets

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43319
2014-11-19 14:09:10 +00:00
John Crispin
6521f53c65 keernel: Fixed dependencies in netfilter modules introduced with 3.18 kernel
Building current trunk with 3.18 kernel fired some errors like 'missed
dependancy of module XXX from library kmod_YYY.ko'. These patch fixes 3
of such issues which are critical to have a successful build.

Signed-off-by: Alexey N Vinogradov <a.n.vinogradov@gmail.com>

SVN-Revision: 43318
2014-11-19 14:09:01 +00:00
John Crispin
d265ebd1dc uboot-envtools: add carambola2 support
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 43317
2014-11-19 13:49:54 +00:00
Jonas Gorski
276817ca7d kernel: remove gpio-pwm kmod definition
r37490 removed the actual driver but left the kmod definition intact,
causing the build system hapily creating an empty package for it.
Remove it also to not make it seem as if it still exists.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43316
2014-11-19 12:42:00 +00:00
Jonas Gorski
02c6798a0d base-files: supress errors from ldd
ldd might be called for shell scrips during sysupgrade, causing it to
complain that they are not a dynamic executables.

This is a harmless error, so supress it to avoid confusing about them
being serious ones.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43315
2014-11-19 12:17:37 +00:00
Jonas Gorski
4b16b90152 toolchain: musl: fix symlink for ldd
ld-musl-*.so* is a symlink "broken" for the hostsystem, so wildcard
will skip it, causing LD_MUSL_NAME to empty and the ldd symlink pointing
to ../../lib directly.
This causes sysupgrade failing to copy any linked libaries and
consequently failing to run anything after switching to ram disk.

Fix this by creating a symlink directly pointing to where ld-musl-*.so*
points to.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43314
2014-11-19 12:17:34 +00:00
John Crispin
2d09efcd26 nf_conntrack_rtsp: update to latest version
Update nf_conntrack_rtsp to latest version based on http://mike.it-loops.com/rtsp/ (rtsp-module-3.7-v2.tar.gz).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43311
2014-11-19 09:21:12 +00:00
John Crispin
d460500a72 uqmi: update to latest git HEAD
* fixes a bug in multipart sms
* adds a new call to read the sim phone number (partially functioanl)

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43310
2014-11-19 09:21:07 +00:00
John Crispin
d49f9039f7 musl: add getopt support for non-option arguments
musl libc doesn't support the GNU getopt extension to parse non-option
arguments when the optstring starts with '-'.

This extension is used by some utilities, notably iptables, that
currently return with errors even with perfectly valid invocations.

The patch adds the code needed by getopt.c and getopt_long.c to
implement that extension.

Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>

SVN-Revision: 43309
2014-11-19 09:21:02 +00:00
John Crispin
bd164f233c mpc85xx: add 3.14 kernel support for mpc85xx platform
This patch adds 3.14 kernel support for the mpc85xx platform.
Works fine here with a TL-WDR4900 which seems to be the only
supported device using this platform.
There might be differences depending on HW version, therefore
I'd ask others to test too.

Changes to 3.10
  missing config options added to 3.14 config file
  patch 001: rebased
  patch 100: rebased
  patch 110: rebased
  patch 120: rebased
  patch 130: rebased
  patch 140: minor adjustment
  patch 200: removed, change went upstream
  patch 210: rebased
  patch 220: removed, change went upstream
  patch 750: new, fixes an issue with ethernet port autoneg being
             disabled due to changes in kernel phy handling

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43308
2014-11-19 09:20:55 +00:00
John Crispin
f210f3811a ar71xx: Added support for D-link DHP-1565 rev. A1
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>

SVN-Revision: 43307
2014-11-19 09:20:47 +00:00
John Crispin
6af2109a64 ar71xx: fix switch configuration in Ubiquiti UAP Pro
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 43306
2014-11-19 09:20:18 +00:00
John Crispin
d93dc245e5 ralink: various fixes to the wm8960 setup code
still no sound but the codec is properly detected now, powers up and i can hear
noise on the speakers.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43305
2014-11-19 09:20:12 +00:00
John Crispin
989bfd815b ralink: make the dmaengine driver compile under 3.14
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43304
2014-11-19 09:20:02 +00:00
John Crispin
e1f6d0dd0a ralink: fix tx vlan offload and hardware status
hardware status and tx vlan offload support on all targets
except rt5350. so i modify the IS_ENABLE condition only for
mt7621.
support mt7621 hardware status reference by SDK. but i don't
have mt7621. if not work just set mt7621 FE_REG_FE_COUNTER_BASE
to 0 to let software count.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 43303
2014-11-19 09:19:57 +00:00
John Crispin
a5f562993e ralink: support netconsole
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 43302
2014-11-19 09:19:49 +00:00
John Crispin
9c5dfd9546 ralink: improve tx vlan offload
hardware tx vlan offload only support max 16 vids
now use add/delete vlan interface to update vlan id table
when duplicate vlan id index detect.
disable hardware tx vlan offload support.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 43301
2014-11-19 09:19:43 +00:00
John Crispin
510ff1f1b8 ralink: merge the mt7620a/n subtargets
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43300
2014-11-19 09:19:38 +00:00
Steven Barth
047f1c8dca netifd: fix race, expose config options
Thanks to Hans Dedecker

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43299
2014-11-19 08:31:13 +00:00
Felix Fietkau
49aca2431c mac80211: fix a crash bug in minstrel_ht
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43298
2014-11-18 22:20:50 +00:00
Felix Fietkau
9cd492b3e1 mac80211: add support for reporting tx status without attached skb
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43297
2014-11-18 22:20:45 +00:00
Felix Fietkau
7b0b8556d8 mac80211: enable minstrel_ht VHT support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43296
2014-11-18 22:20:37 +00:00
Jonas Gorski
2e95b1fda7 base-files: properly fix copying ld*.so with eglibc
r36107 ("base-files: sysupgrade fail with eglibc") tried to fix
sysupgrade by changing the ld-soname to what is expected, but only
fixed MIPS while breaking ARM.

The underlying issue is that the ld.so name varies widely across
different architectures for eglibc:

eglibc-2.19-r25243$ grep -r "ld-soname :=" . | awk '{ print $3 }' | sort -u
ld64.so.1
ld64.so.2
ld-linux-aarch64_be.so.1
ld-linux-aarch64.so.1
ld-linux-armhf.so.3
ld-linux-mipsn8.so.1
ld-linux.so.2
ld-linux.so.3
ld-linux-x32.so.2
ld-linux-x86-64.so.2
ld.so.1

Instead of adding each different soname to check for and copy it,
replace the awk script with a sed script to extract it properly and
drop the hardcoded so-name.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43295
2014-11-18 15:19:46 +00:00
Steven Barth
d2e0fa517f odhcp6c: be less verbose by default, increase musl compatibility
SVN-Revision: 43294
2014-11-18 09:40:39 +00:00
John Crispin
752745a85a ralink: set ralink_soc on mt7621
sdhci failed to init because of this

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43293
2014-11-17 21:58:30 +00:00
John Crispin
32d4348540 ralink: fix pcie reset
some old mt7620a uboots dont reset the pcie core properly. work around this
issue in the kernel driver.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43292
2014-11-17 16:27:48 +00:00
John Crispin
ed5ae98cf4 kernel/modules: use crc32c_generic.ko instead of crc32c.ko
Starting from kernel version 3.15, the crc32c module was renamed to
crc32c_generic.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43291
2014-11-17 14:30:42 +00:00
John Crispin
45462e9c99 kernel/modules: location of usb-common.ko changed
usb-common.ko was moved to drivers/usb/common starting from kernel 3.16
by upstream commit f4cbd33fd5f0587910fa9db403a1b42f1cabf820

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43290
2014-11-17 14:30:19 +00:00
John Crispin
5d2c810101 kernel: add the ubifs EOF marker support to 3.14 kernel
Without this patch the UBIFS driver is unable to attach to the mtd
storage and mount the root FS.

Fixes a kernel panic with Netgear WNDR4300/3700v4 devices.

Signed-off-by: Gianluca Anzolin <gianluca@sottospazio.it>

SVN-Revision: 43287
2014-11-17 08:34:03 +00:00
Felix Fietkau
28b26fa603 ramips: disable 2.4 ghz on 802.11ac wifi on WHR-1166D
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43283
2014-11-16 12:26:53 +00:00
Felix Fietkau
b3f2d3d01b ramips: use mediatek,mtd-eeprom instead of ralink for mt76
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43282
2014-11-16 12:26:47 +00:00
Felix Fietkau
02c319c27a ramips: fix default config breakage on whr-1166d
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43281
2014-11-16 11:39:19 +00:00
Felix Fietkau
c9394a7b9e trace-cmd: update to v2.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43280
2014-11-16 11:39:14 +00:00
Felix Fietkau
dd5959c114 mac80211: fix VHT rate selection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43279
2014-11-16 11:39:07 +00:00
Felix Fietkau
25d508dcd9 mac80211: backport list_last_entry
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43278
2014-11-16 11:39:01 +00:00
Felix Fietkau
6abb5f7a21 mac80211: backport devm_kmemdup
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43277
2014-11-16 11:38:55 +00:00
John Crispin
c073bf6bdf ralink: few updates tot he sdhci probe code
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43275
2014-11-15 14:35:32 +00:00
John Crispin
ce1c580efb ralink: make the sdhci module build again
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43274
2014-11-14 18:51:41 +00:00
John Crispin
76a54a424c ar8216: fix "unused variable" compiler warning
Most likely a copy & paste error when deriving ar8327_sw_set_ports
from ar8xxx_sw_set_ports.
Remove unused variable.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43273
2014-11-14 17:06:09 +00:00
John Crispin
44d703160b lantiq: Concatenate multiple flash chips for lantiq-flash
Signed-off-by: Maikel Bloemendal <openwrt@maikelenyvonne.nl>
Tested-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 43272
2014-11-14 17:06:04 +00:00
John Crispin
6fafcba63b ar71xx: Fix the sys LEDs on the EasyLink M150 and mini
Sets the system LED on the EasyLink M150 and mini to lower-case "easylink"

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 43271
2014-11-14 16:58:29 +00:00
John Crispin
b6f5713b3f ar71xx: adjust MR900 profile for the OpenMesh MR900v2 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43270
2014-11-14 16:55:32 +00:00
John Crispin
7dce745a99 package/uboot-envtools: add OpenMesh MR900v2 support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43269
2014-11-14 16:55:26 +00:00
John Crispin
29c7b1860c package/om-watchdog: add OpenMesh MR900v2 support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43268
2014-11-14 16:55:19 +00:00
John Crispin
52c267e2f7 ar71xx: add sysupgrade support for OpenMesh MR900v2
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43267
2014-11-14 16:55:14 +00:00
John Crispin
104be9f803 ar71xx: add user-space support for OpenMesh MR900v2
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43266
2014-11-14 16:55:04 +00:00
John Crispin
bc333d5399 ar71xx: add kernel support for the OpenMesh MR900v2
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43265
2014-11-14 16:54:58 +00:00
John Crispin
305c1431e3 ar71xx: create profile and build image for the OpenMesh MR900 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43264
2014-11-14 16:54:50 +00:00
John Crispin
c126266f43 package/uboot-envtools: add OpenMesh MR900 support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43263
2014-11-14 16:54:45 +00:00
John Crispin
c1f2ef8db4 package/om-watchdog: add OpenMesh MR900 support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43262
2014-11-14 16:54:38 +00:00