Florian Fainelli
|
9013e936ed
|
cache gpio values in gpio_set
SVN-Revision: 16330
|
2009-06-04 10:01:55 +00:00 |
|
Florian Fainelli
|
1208ffaedb
|
use the correct number of GPIOs for bcm6358
SVN-Revision: 16329
|
2009-06-04 10:01:03 +00:00 |
|
Florian Fainelli
|
c95420f06d
|
register gpiochip earlier, allowing gpio-based runtime detection to be performed in board_init callback
SVN-Revision: 16328
|
2009-06-04 09:59:28 +00:00 |
|
Florian Fainelli
|
d2b2ce325a
|
merger mtu/802.1q related fixes: bcm63xx integrated ethernet mac supports receiving and sending frames bigger than 1500 bytes, this patch adds support for changing MTU.
This patch also fixes the reception of 802.1q frames for default MTU
which were reported as oversized.
SVN-Revision: 16302
|
2009-06-03 08:55:18 +00:00 |
|
Florian Fainelli
|
05b40c8d13
|
backport an upstream fix: We're not disabling IRQ, so we must call the irq safe flavour of netif_rx_complete, should fix some crashes when running the system for a long time
SVN-Revision: 16277
|
2009-06-01 18:27:51 +00:00 |
|
Florian Fainelli
|
0d7f5f8d2c
|
add support for sysupgrade (#5117)
SVN-Revision: 15900
|
2009-05-17 16:53:57 +00:00 |
|
Florian Fainelli
|
9485c3e834
|
register gpiodev
SVN-Revision: 15509
|
2009-04-30 14:09:01 +00:00 |
|
Florian Fainelli
|
dd2b72105b
|
fix redundant driver name printing in probe function
SVN-Revision: 15254
|
2009-04-19 13:32:54 +00:00 |
|
Florian Fainelli
|
1f334e3caa
|
make images that can be flashed using the stock firmware web interface, thanks to Anselmo Luginbuhl and Daniel Dickinson (#4909, #4943)
SVN-Revision: 15253
|
2009-04-19 13:18:48 +00:00 |
|
Florian Fainelli
|
14832d3c23
|
some more fixes to the SPI controller driver
SVN-Revision: 15146
|
2009-04-08 08:52:57 +00:00 |
|
Florian Fainelli
|
501ebb4f74
|
enable all blocks on 6338 and uart clock on 6345
SVN-Revision: 14957
|
2009-03-21 10:50:44 +00:00 |
|
Florian Fainelli
|
0972ee5331
|
add support for bcm6345 SoC, needs testing
SVN-Revision: 14953
|
2009-03-20 15:08:02 +00:00 |
|
Florian Fainelli
|
32c29f1aaf
|
fix SPI register switch and prepare for UDC, thanks to Henk Vergonet (#4783)
SVN-Revision: 14914
|
2009-03-17 11:28:54 +00:00 |
|
Florian Fainelli
|
6495fa36ea
|
add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366
SVN-Revision: 14850
|
2009-03-12 08:54:04 +00:00 |
|
Florian Fainelli
|
8065eb4a55
|
do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_mem_region on the registers
SVN-Revision: 14848
|
2009-03-11 10:32:44 +00:00 |
|
Florian Fainelli
|
51125fb616
|
make SPI work in full-duplex mode by default
SVN-Revision: 14841
|
2009-03-10 15:28:29 +00:00 |
|
Florian Fainelli
|
ae1ed9b7f4
|
add bcm63xx_spi based on reading shared/opensource/flash/spiflash.c from the consumer releases, needs testing
SVN-Revision: 14793
|
2009-03-08 15:27:46 +00:00 |
|
Florian Fainelli
|
871b0d6fed
|
fix SPI accessors
SVN-Revision: 14792
|
2009-03-08 14:20:15 +00:00 |
|
Florian Fainelli
|
1bcf5d0de6
|
fix typo for the bcm6338 spi IRQ, change platform driver name and make the SPI irq be fetchable by platform driver initialization code
SVN-Revision: 14790
|
2009-03-08 12:43:13 +00:00 |
|
Florian Fainelli
|
bf7f2939c2
|
compile and register SPI controller device
SVN-Revision: 14789
|
2009-03-08 12:18:26 +00:00 |
|
Florian Fainelli
|
1e92d0355d
|
make bcm6358 consistend with the other boards naming
SVN-Revision: 14788
|
2009-03-08 12:17:19 +00:00 |
|
Florian Fainelli
|
b1abddb45f
|
fix some SPI register definitions and platform-device registration code
SVN-Revision: 14787
|
2009-03-08 12:13:52 +00:00 |
|
Florian Fainelli
|
5e8dfe53b6
|
prepare for SPI controller driver
SVN-Revision: 14755
|
2009-03-06 01:15:00 +00:00 |
|
Florian Fainelli
|
9422b140ba
|
fix SPI register definitions
SVN-Revision: 14754
|
2009-03-06 01:13:10 +00:00 |
|
Florian Fainelli
|
2d1ed46c68
|
fix a bcm963xx-flash warning
SVN-Revision: 14730
|
2009-03-02 18:55:47 +00:00 |
|
Florian Fainelli
|
6f484fc283
|
provide a sane SPROMv2 to make on-board bcm4318 card work, thanks mb__
SVN-Revision: 14683
|
2009-02-27 15:48:23 +00:00 |
|
Florian Fainelli
|
b539d11497
|
move the device registration to an earlier initcall level, required for fallback SPROM to work
SVN-Revision: 14681
|
2009-02-27 15:18:34 +00:00 |
|
Florian Fainelli
|
730346e2d5
|
add support for user9102 boards (#4537)
SVN-Revision: 14305
|
2009-01-31 16:01:20 +00:00 |
|
Florian Fainelli
|
d7cb033a04
|
Add board definitions for the Davolink DV201AMR
SVN-Revision: 14263
|
2009-01-29 14:54:13 +00:00 |
|
Florian Fainelli
|
46b91ed787
|
frequency is in Hz, thanks Joel
SVN-Revision: 14067
|
2009-01-17 15:29:36 +00:00 |
|
Florian Fainelli
|
5ce93c07a5
|
fix SPI register definitions
SVN-Revision: 14048
|
2009-01-15 22:53:32 +00:00 |
|
Florian Fainelli
|
5905a48169
|
allow bcm6338 to get the base address of the memory controller register, required to detect memory size
SVN-Revision: 14047
|
2009-01-15 22:42:22 +00:00 |
|
Florian Fainelli
|
4c7d2cf90e
|
correct SPI register size
SVN-Revision: 13886
|
2009-01-06 14:49:27 +00:00 |
|
Florian Fainelli
|
85d59fbf8c
|
add board registration of the bcm96338gw
SVN-Revision: 13693
|
2008-12-19 17:24:29 +00:00 |
|
Florian Fainelli
|
3f7137022d
|
6338 has no PCI
SVN-Revision: 13692
|
2008-12-19 17:08:11 +00:00 |
|
Florian Fainelli
|
3dd67d64f4
|
add experimental support for bcm6338
SVN-Revision: 13691
|
2008-12-19 17:05:09 +00:00 |
|
Florian Fainelli
|
fa5a568380
|
Register watchdog driver
SVN-Revision: 13690
|
2008-12-19 15:00:33 +00:00 |
|
Florian Fainelli
|
42ff43386a
|
fix register definitions for bcm6358, thanks SGDA
SVN-Revision: 13688
|
2008-12-19 10:19:00 +00:00 |
|
Florian Fainelli
|
7ab973e1af
|
Add bcm63xx_wdt but do not enable it yet
SVN-Revision: 13677
|
2008-12-17 14:06:03 +00:00 |
|
Florian Fainelli
|
4dc65aed63
|
Add support for Sagem F@ST2404 (#4332)
SVN-Revision: 13583
|
2008-12-10 16:13:41 +00:00 |
|
Florian Fainelli
|
6acf4c2a19
|
Fix remaining bug of the off-by-one error ;)
SVN-Revision: 13551
|
2008-12-08 21:00:00 +00:00 |
|
Florian Fainelli
|
fadddcc655
|
Enable ohci on bcm96348gw
SVN-Revision: 13549
|
2008-12-08 16:25:41 +00:00 |
|
Florian Fainelli
|
47050e72be
|
Prepare bcm63xx for SPI master support
SVN-Revision: 13547
|
2008-12-08 14:14:37 +00:00 |
|
Florian Fainelli
|
f3be50a031
|
Add support for bcm96348gw10 (Netgear DG834GT) (#4319)
SVN-Revision: 13540
|
2008-12-07 20:34:48 +00:00 |
|
Florian Fainelli
|
01a5c953a3
|
Fix an off-by one printing error
SVN-Revision: 13469
|
2008-12-02 14:11:54 +00:00 |
|
Florian Fainelli
|
e8aad7938a
|
Improve Inventel Livebox support
SVN-Revision: 13427
|
2008-11-29 12:57:41 +00:00 |
|
Florian Fainelli
|
cc2e43992d
|
bcm63xx MTD driver cleanup and fixes: - convert to platform_driver - get the window_size/addr from the board setup code - indentation fixes - remove duplicate code - move bcm_tag declaration out of the MTD driver
SVN-Revision: 13379
|
2008-11-27 20:40:03 +00:00 |
|
Florian Fainelli
|
44108d6a2d
|
Commit changes on the files for gpiolib
SVN-Revision: 13374
|
2008-11-27 10:38:36 +00:00 |
|
Florian Fainelli
|
1c77ec0587
|
Flatten brcm63xx patches, should make our life easier to patch files now ;)
SVN-Revision: 13368
|
2008-11-26 18:41:01 +00:00 |
|
Florian Fainelli
|
e854a26332
|
Prevent the MTD map to fail, somehow detect_cfe will read the tag plus some garbage, therefore making a simple strcmp will fail
SVN-Revision: 13299
|
2008-11-20 21:26:11 +00:00 |
|
Florian Fainelli
|
0d4286b0b3
|
This patch is for broadcom 96348GW-11 boards, to get USB and Ethernet working. Also it patches mtd map driver for bcm96xx boards to be sure that CFE1CFE1 code is detected when booting from CFE. (#4201)
SVN-Revision: 13213
|
2008-11-15 11:30:22 +00:00 |
|
Florian Fainelli
|
517e3d404c
|
Delete old brcm63xx files
SVN-Revision: 13210
|
2008-11-15 11:21:42 +00:00 |
|
Felix Fietkau
|
d0388bbe5c
|
brcm63xx: rename mtd partitions to the ones used by other openwrt platforms - should make the automatic rootfs overlay split work and fix the mounting of the right partition
SVN-Revision: 13130
|
2008-11-06 12:52:39 +00:00 |
|
Florian Fainelli
|
691e187381
|
Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when testing with 8MB devices
SVN-Revision: 13015
|
2008-10-20 12:55:28 +00:00 |
|
Florian Fainelli
|
ebf4eb11e9
|
Upgrade brcm63xx to 2.6.24
SVN-Revision: 10455
|
2008-02-13 17:31:17 +00:00 |
|
Felix Fietkau
|
56231056ea
|
strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
SVN-Revision: 8653
|
2007-09-06 16:27:37 +00:00 |
|