Commit graph

852 commits

Author SHA1 Message Date
Jo-Philipp Wich
eced3b3a35 base-files: support passing mode to ucidef_set_led_netdev()
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48806
2016-02-26 14:49:17 +00:00
Felix Fietkau
285d9e364e base-files: add support for speed mask to switch config init scripts
This patch adds extra parameter to switch LED trigger initialization
functions.  New functionality maintains backward compatibility, so
calling functions without setting new speed_mask parameter works
as expected.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48776
2016-02-25 13:31:29 +00:00
John Crispin
c0c3f2d4c9 leds: support oneshot as well as timer triggers
oneshot and timer have the same configuration options, just a different
trigger name.

Signed-off-by: Karl Palsson <karlp@etactica.com>

SVN-Revision: 48770
2016-02-25 10:14:16 +00:00
Jo-Philipp Wich
117cef6d44 base-files: add netifd's default prelocal table to /etc/iproute2/rt_tables
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48685
2016-02-09 12:34:05 +00:00
Jo-Philipp Wich
4aeeead303 x86: preserve partition table on sysupgrade
With this patch sysupgrade will write directly to the partitions
instead of to the main disk.  The UUID is copied from the image
to the MBR as well.  This prevents the mbr from being completely
overwritten and losing the partition table.  The -p option has
been added to maintain the original behavior and overwite the
entire disk with the new image.  Tests have been added to ensure
that the image partitions match up with the active partitions.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 48682
2016-02-09 12:33:17 +00:00
Jo-Philipp Wich
cc289e0adb base-files: honor CONFIG_TARGET_INIT_PATH
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48678
2016-02-08 14:28:50 +00:00
John Crispin
e2fd1adaf5 base-files: For sysfixtime use hwclock if RTC available
On systems that have an RTC prefer it to the file-based time fixup (i.e.
use hwclock when there is a permanent clock instead of the faked up time
logic that is needed when there is not RTC).

We can't rely on hctosys kernel feature either as we're usually using
RTC as kernel modules which are usually being loaded after hctosys was
run, leading in the following error:

  hctosys: unable to open rtc device (rtc0)

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 48661
2016-02-08 08:25:53 +00:00
Felix Fietkau
f70c8ba198 base-files: set mac address in default network config via device sections
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48646
2016-02-07 14:18:43 +00:00
Felix Fietkau
57776e68ce base-files: remove default /etc/config/network, generate it via board.d instead
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48493
2016-01-25 16:30:41 +00:00
Felix Fietkau
b7ab6c66cc base-files: fix sysupgrade 'wget' handling for uclient-fetch
change 48451 tried to add support for uclient-fetch by moving
/usr/bin/wget to /bin/wget, but this change kept the symbolic
link to /bin/busybox as install_bin creates links to param 1

the desired fix is to link to uclient-fetch to wget:
  install_bin /bin/uclient-fetch /bin/wget

Signed-off-by: John Clark <inindev@gmail.com>

SVN-Revision: 48483
2016-01-25 12:35:21 +00:00
Felix Fietkau
f57419d26e base-files: fix sysupgrade 'wget' handling
with r48379 and r48386 the path of wget changed.
respect that and adjust the dirname.

this fixes #21680

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 48451
2016-01-22 09:41:58 +00:00
Jo-Philipp Wich
740a2ee163 base-files: Fix sysupgrade overlay saving
A previous change to sysupgrade moved the overlay files into upper/
The -c switch generates a list of files to backup, but the sed
calls did not take this into consideration.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 48281
2016-01-17 18:24:30 +00:00
John Crispin
3f78186f76 base-files: allow timezone to be overriden by zonename (proper zoneinfo support)
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 47980
2015-12-23 14:44:31 +00:00
Felix Fietkau
0936f5b0e0 base-files: cleanup mtd_get_mac_binary hexdump
Remove usage of dd, as per request from Yousong Zhou.
<https://lists.openwrt.org/pipermail/openwrt-devel/2015-December/037743.html>

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47949
2015-12-19 11:28:42 +00:00
Felix Fietkau
c74a690661 ar71xx: scan nand ubi partition for ath9k eeprom files
The MR18 stores the ath9k eeprom values on the NAND.
This patch makes it possible to retrieve the images
from there.

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47948
2015-12-19 11:28:36 +00:00
Jo-Philipp Wich
67e1c87012 all: drop old uci-defaults.sh
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
John Crispin
2f42d9e27d base-file: remove /tmp/.jail (now useless)
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>

SVN-Revision: 47855
2015-12-11 15:06:31 +00:00
John Crispin
ec6b85ca0e base-files: use max_brightness to set LED
LEDs which are controlled by a PWM need to use the supplied
max_brightness instead. Otherwise they might appear to be
very dim / broken.

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47854
2015-12-11 15:06:11 +00:00
Jo-Philipp Wich
08078df83d board.d: add support for gpio_switch sections
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47762
2015-12-04 15:02:32 +00:00
Jo-Philipp Wich
61a99da4f9 base-files: board.d: auto-set model id and name if /tmp/sysinfo is available
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47752
2015-12-04 11:06:57 +00:00
Jo-Philipp Wich
6c8daa6ba3 base-files: board.d: support dsl modems, atm bridges and pppoe protocol
This adds support for specifying the dsl modem, atm bridge configs and setting
the pppoe protocol for wan.

These additions are required to port the Lantiq target to board.d.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47750
2015-12-04 09:56:55 +00:00
Jo-Philipp Wich
527ec2af59 all: remove dummy ucidef_set_interface_loopback() from board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47744
2015-12-03 23:13:00 +00:00
Jo-Philipp Wich
f611358870 base-files: board.d: support specifiying the protocol of lan and wan
Some boards, e.g. the Sheeva Plug, require the lan interface to be set
to DHCP instead of a static address, therfore support that.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47732
2015-12-03 22:27:06 +00:00
Jo-Philipp Wich
ac9bed4bc0 base-files: board.d: support timer leds
Add ucidef_set_led_timer() and handling for it to config_generate.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47731
2015-12-03 22:27:02 +00:00
Jo-Philipp Wich
b3f8340a5e base-files: board.d: support ide leds
Add ucidef_set_led_ide() to define "ide-disk" triggered leds.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47729
2015-12-03 21:12:56 +00:00
Jo-Philipp Wich
734ae1bd17 base-files: uci-defaults-new.sh: fix for handling multiple ifnames
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47728
2015-12-03 21:12:51 +00:00
Jo-Philipp Wich
9b02e73188 board.d: merge ucidef_add_switch() and ucidef_add_switch_ports()
This changes uci-defaults-new.sh, config_generate and all relevant board.d
files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into
a single function.

Also removes now superfluous enable and reset arguments.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47721
2015-12-03 17:30:24 +00:00
Jo-Philipp Wich
d17a64c7c0 base-files: uci-defaults-new: remove reset/enable args of ucidef_add_switch()
Out of 69 switch definitions, only 3 pass something different than "1" as
values for reset and enable, with one of those three being invalid.

This change ...

 * removes the reset and enable arguments from ucidef_add_switch()
 * unconditionally writes reset:1 and enable:1 to JSON
 * converts the three users of nonstandard values to ucidef_add_switch_attr()

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47720
2015-12-03 17:30:08 +00:00
Jo-Philipp Wich
80f767d093 base-files: uci-defaults-new, config_generate: refactor code and drop old vlans
Remove support for now unused ucidef_add_switch_vlan(), move port->vlan and
vlan->interfaces conversion to uci-defaults-new.sh and massively simplify
config_generate.

This change prepares the following upcoming steps:

 * Eliminate use of ucidef_set_interface_lan_wan() for switch only devices
 * Merge ucidef_add_switch() with ucidef_add_switch_ports()

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47719
2015-12-03 16:25:19 +00:00
Jo-Philipp Wich
1871619e72 base-files: config_generate: add missing chunks of force tag support
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47718
2015-12-03 15:46:43 +00:00
Jo-Philipp Wich
73a4e0334c base-files: uci-defaults-new, config_generate: allow force tagged cpu ports
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47679
2015-11-30 12:32:12 +00:00
Jo-Philipp Wich
a826098e2b base-files: uci-defaults-new: only emit force_link for additional ifaces
Only se4t the force_link property for non-lan, non-wan ifaces as it is
unnecessary in the default cases.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47675
2015-11-30 10:55:43 +00:00
Jo-Philipp Wich
b64f953cd8 base-files: uci-defaults-new: fix unquoted variables
Properly quote variables in ucidef_set_interface_lan() and
ucidef_set_interface_lan(), otherwise interfaces with multiple devices
are not properly written into the configuration.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47673
2015-11-30 10:43:18 +00:00
Jo-Philipp Wich
cfac7289c7 base-files: uci-defaults-new: add board id and name helpers
Add ucidef_set_board_id() and ucidef_set_model_name() procedures to store
model information in the board.json file.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47671
2015-11-30 10:17:05 +00:00
Jo-Philipp Wich
0e0119b6f0 base-files: uci-defaults-new, config_generate: support for gpio leds
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47660
2015-11-26 13:53:06 +00:00
Jo-Philipp Wich
aa4c5fd2b0 base-files: config_generate: regroup led generator code
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47659
2015-11-26 13:53:02 +00:00
Jo-Philipp Wich
8b9e839955 base-files: uci-defaults-new: remove ucidef_set_led_interface()
The only user was the hg255d board and config_generate did not even emit
proper uci for it.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47658
2015-11-26 12:46:09 +00:00
Jo-Philipp Wich
972d3de148 base-files: config_generate: support rssi leds
Add support for emitting rssi monitor and led configuration sections.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47656
2015-11-26 12:04:43 +00:00
Jo-Philipp Wich
bd4c757685 base-files: uci-defaults-new: fix storing rssi leds and triggers in board.json
Remove extra nesting of rssi leds in the led object and move rssi monitor
declaration to its own object.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47655
2015-11-26 12:04:38 +00:00
Jo-Philipp Wich
92d414eb07 base-files: config_generate: reformat for better readability and quote variables
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47654
2015-11-26 12:04:32 +00:00
Jo-Philipp Wich
1e591ee6d1 base-files: uci-defaults-new: properly quote variables
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47652
2015-11-26 11:17:54 +00:00
Jo-Philipp Wich
a466bfe8f4 base-files: config_generate: handle switch port attributes and better group json_select
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47648
2015-11-25 15:43:50 +00:00
Jo-Philipp Wich
97baeb2fa4 base-files: config_generate: do not remove previously generated interfaces
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47647
2015-11-25 15:43:43 +00:00
Jo-Philipp Wich
63c2111e86 base-files: config_generate: properly handle multiple switches
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47646
2015-11-25 15:43:33 +00:00
Jo-Philipp Wich
04b8b97fff base-files: uci-defaults-new: add ucidef_add_switch_port_attr() helper
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47645
2015-11-25 15:43:28 +00:00
Jo-Philipp Wich
2f69fefc37 base-files: uci-defaults-new: whitespace cleanup
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47644
2015-11-25 15:43:21 +00:00
Jo-Philipp Wich
212feb9ccf base-files: uci-defaults-new: don't store switch attr numbers as strings
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47643
2015-11-25 15:43:15 +00:00
Jo-Philipp Wich
2d5dbf9b47 base-files: config_generate: support autogenerating vlans
Add support for generating vlans solely from the port layout description
given through ucidef_add_switch_ports().

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47639
2015-11-24 21:16:38 +00:00
Jo-Philipp Wich
d6b5ce48dd base-files: add ucidef_set_interface_wan() and ucidef_add_switch_ports()
Add further helper functions to uci-defaults-new.sh for easier declarations
of complex switch layouts.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47638
2015-11-24 21:16:35 +00:00
John Crispin
18691109df base-files: show hint when JFFS2-partition is full and overlayfs mounted read-only
since r45833 and r45848 the overlayfs is automatically mounted read-only
(and blocks remounts as r/w) when JFFS2 is full. see ticket #19564

because of this normal file deletion is not possible anymore.
if a user logins interactively (e.g. SSH) show a hint for this,
that files must be removed in /overlay/upper/...

v2: fix subject line

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 47623
2015-11-24 18:32:09 +00:00