Commit graph

1212 commits

Author SHA1 Message Date
John Crispin
87eb8fad13 base-files: remove fstab symlink
the symlink no longer gets used since we switched to the block-mount tool.

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-17 04:13:07 +02:00
Hannu Nyman
df7581e4c0 base-files: increase default system log size to 64 kB
Increase the default system log buffer size
from 16 kB (built-in default in ubox logd)
to 64 kB by setting the option in /etc/config/system.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-06-07 23:13:29 +02:00
Jo-Philipp Wich
35b33f0413 base-files: maintain LED config state
Record the state of any hardware LED configured through UCI and use that
information to revert the state when applying updated settings while
maintaining default behaviour of system LEDs.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 10:34:50 +02:00
Felix Fietkau
d6ad9d3e9c base-files: fix /bin/config_generate breakage
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-08 07:32:30 +02:00
Jo-Philipp Wich
924302ba36 base-files: drop /etc/config/system
The board_detect framework is now able to create the entire system config from
scratch so we can finally drop the copy shipped by base-files.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 00:34:02 +02:00
Jo-Philipp Wich
b98f78b1c1 base-files: rework config generation logic
Now that config_generate is able to generate the entire /etc/config/system
from scratch we can apply the same logic as used for /etc/config/network;
when the configuration file exists already then do not do anything, else
generate it from the values provided by /etc/board.json .

In order to facilitate that move the file existance checking inside
/bin/config_generate and call it unconditionally from /bin/board_detect.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 00:34:02 +02:00
Jo-Philipp Wich
07f03d0833 base-files: support port_state LED types in board.d
Add support for handling port_state LEDs as used by ADM5120.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 00:31:09 +02:00
Jo-Philipp Wich
528b8f6f93 base-files: support hostname and ntp servers through board.d
Add support for specifying hostname and NTP servers via /etc/board.d/ scripts.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 00:31:09 +02:00
Jo-Philipp Wich
33a4d22f4c base-files: reset LED state
Attempt to reset all LED states before applying the UCI configuration to
avoid leaving disabled LEDs behind in lingering glowing state, e.g. when
changing the sysfs entry in the config from one hardware LED to another.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-07 23:01:58 +02:00
Jo-Philipp Wich
7f69458296 base-files: rework postinstall uci-defaults handling
Some package postinstall operations, e.g. those emitted by the LuCI build
system, source and delete the uci-defaults themselves upon package insteall,
causing the generic defaults apply code to trigger shell errors like:

    .../luci-app-ddns.postinst: .: line 130: can't open './40_luci-ddns'

Rework the generic apply code to check the existence of the uci-defaults
script before trying to source it, use sed to prefilter the list of entries
from the control file and perform the directory change in a subshell,
avoiding the need for cd $OLDPWD.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-27 10:27:45 +02:00
Jo-Philipp Wich
1012701014 x86: generalize partition discovery for sysupgrade
Generalize the partition discovery in sysupgrade in order to fix sysupgrade
and config backup/recovery on MMC block devices which use a different naming
scheme compared to mtdblock or sd* devices.

The change also adds the find applet to the ramdisk utilities so that upgrade
code can rely on it.

The commit is based on the initial submission by Russell Senior at
http://patchwork.ozlabs.org/patch/625440/ .

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-24 13:30:58 +02:00
Hannu Nyman
3193053df7 Centralize setting of all version info to include/version.mk
Centralize setting all version information in include/version.mk
* Set RELEASE env variable in include/version.mk instead of toplevel.mk.
  Stop exporting the variable.
* Remove hardcoded release name from /etc/banner

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-05-24 13:30:58 +02:00
John Crispin
a39ac242cc base-files: fix some failsafe issues
* if the shell was closed booting continued

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:03:25 +02:00
Kevin Darbyshire-Bryant
8d105653b1 base-files: sysfixtime typo in exclude dnsmasq.time
Typo, missing space before ] in previous commit caused shell syntax
failure and incorrect restoration of time.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-05-19 18:14:28 +02:00
Kevin Darbyshire-Bryant
2b1556d3e0 base-files: sysfixtime exclude dnsmasq.time
dnsmasq maintains dnsmasq.time across reboots and uses it as a means of
determining if current time is good enough to validate dnssec time
stamps.  By including /etc/dnsmasq.time as a time source for sysfixtime,
the mechanism was effectively defeated because time was set to the
last time that dnsmasq considered current even though that time is in
the past.  Since that time is out of date, dns(sec) resolution would
fail thus defeating any ntp based mechanisms for setting the clock
correctly.

In theory the process is defeated by any files in /etc that are newer
than /etc/dnsmasq.time however dnsmasq now updates the file's timestamp
on process TERM so hopefully /etc/dnsmasq.time is the latest file
timestamp in /etc as part of LEDE shutdown/reboot.

Either way, including /etc/dnsmasq.time as a time source for
sysfixtime is not helpful.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-05-19 10:28:18 +02:00
Jo-Philipp Wich
21f460e0c1 Revert "base-files: sysfixtime exclude dnsmasq.time"
This reverts commit 382779e009.

Reverting this commit due to a missing Signed-off-by.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-19 10:28:11 +02:00
Kevin Darbyshire-Bryant
382779e009 base-files: sysfixtime exclude dnsmasq.time
dnsmasq maintains dnsmasq.time across reboots and uses it as a means of
determining if current time is good enough to validate dnssec time
stamps.  By including /etc/dnsmasq.time as a time source for sysfixtime,
the mechanism was effectively defeated because time was set to the
last time that dnsmasq considered current even though that time is in
the past.  Since that time is out of date, dns(sec) resolution would
fail thus defeating any ntp based mechanisms for setting the clock
correctly.

In theory the process is defeated by any files in /etc that are newer
than /etc/dnsmasq.time however dnsmasq now updates the file's timestamp
on process TERM so hopefully /etc/dnsmasq.time is the latest file
timestamp in /etc as part of LEDE shutdown/reboot.

Either way, including /etc/dnsmasq.time as a time source for
sysfixtime is not helpful.
2016-05-18 22:17:33 +02:00
Vittorio G (VittGam)
d742e1b513 base-files: Enhancements to /etc/profile
- Update the terminal window title with the current directory and hostname, if using an xterm-compatible terminal emulator.
- Add ll, an useful alias to ls.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
2016-05-14 16:53:10 +02:00
Vittorio Gambaletta (VittGam)
40f933d7ff base-files: Fix config_generate when there are no switch VLANs or ports configured in board.json.
The json_select call fails when there are no roles or ports objects in board.json. "json_select .." must not be executed after failing.

This fixes for example LEDs not being set up in /etc/config/system.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
2016-05-11 17:06:54 +02:00
Daniel Golle
9b9c78e071 base-files: evaluate uci-defaults on run-time installations
Packages may install scripts into /etc/uci-defaults to be executed once
after installation, usually at the first boot of the target. This works
fine if the package was installed to the rootfs during build or using
the ImageBuilder.
If the package is installed using opkg during run-time uci-defaults
were applied only after a reboot of the device. Avoid the need to
reboot by evaluting the package's uci-defaults in default-postinst.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-05-04 14:24:37 +01:00
Jo-Philipp Wich
a6f76bffd8 signing: remove unatteded build key and use current keyring instead
Remove the public unatteded buildkey from the opkg package to avoid
having hardcoded keys in tree. Use the external keyring package instead
which can be easily updated by users.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-30 20:39:23 +02:00
John Crispin
4a8e960c62 base-files: fix group/user settings after sysupgrade
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-29 04:15:34 +02:00
John Crispin
ed07ef1601 base-files: split user/group addition code into a function
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-29 04:15:34 +02:00
John Crispin
d72e538e89 base-files: add new public key used by unattended builds
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-29 04:15:34 +02:00
John Crispin
a13f47760c base-files: add a conditional dependency to lede-keyring
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-29 04:15:34 +02:00
John Crispin
528ffec3cd base-files: remove ununsed login.sh
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-19 20:42:34 +02:00
John Crispin
b4e33a1c08 base-files: Allow to disable failsafe mode
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
2016-04-19 10:07:35 +02:00
John Crispin
dc92917409 image / basefiles: make console password configurable
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-18 21:53:07 +02:00
John Crispin
5e85ae9e4c base-files: fix error message during boot
preinit spews out this message

"cat: can't open '/proc/device-tree/model': No such file or directory"

Signed-off-by: John Crispin <john@phrozen.org>
2016-04-11 11:58:57 +02:00
Jo-Philipp Wich
9e04019024 package: flag essential components as nonshared
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-06 22:38:47 +02:00
Jo-Philipp Wich
32a0b8c104 include/version.mk: rework repository url handling
- Add %A placeholder for substituting the package architecture
- Change %U placeholder to refer to the toplevel repository URL
- Construct package feed URLs relative to the toplevel one to match new layout

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-13 00:31:15 +02:00
John Crispin
fa69553900 branding: add LEDE branding
Signed-off-by: John Crispin <blogic@openwrt.org>
2016-03-24 22:40:13 +01:00
Hauke Mehrtens
ea6d36111b base-files: allow to set arbitrary ip address and netmask
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49179
2016-04-17 12:49:54 +00:00
John Crispin
63c9caaa91 base-files: add function ucidef_set_interface_raw to enable default configuration on interfaces other than lan and wan.
Signed-off-by: Micke Prag <micke.prag@telldus.se>

SVN-Revision: 48976
2016-03-10 19:07:17 +00:00
Felix Fietkau
956794c2e9 base-files: change type of adsl and vdsl to dsl only
Instead of having two different types adsl and vdsl just create one dsl
type. This way we can use the same luci code for adsl and vdsl and the
config parameters are not so different.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48944
2016-03-07 11:03:29 +00:00
Felix Fietkau
4ac99abeb3 lantiq: do not set default firmware file
We are now shipping a DSL firmware, do not set it by default to some
file name.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48941
2016-03-07 11:03:18 +00:00
Jo-Philipp Wich
eced3b3a35 base-files: support passing mode to ucidef_set_led_netdev()
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48806
2016-02-26 14:49:17 +00:00
Felix Fietkau
285d9e364e base-files: add support for speed mask to switch config init scripts
This patch adds extra parameter to switch LED trigger initialization
functions.  New functionality maintains backward compatibility, so
calling functions without setting new speed_mask parameter works
as expected.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48776
2016-02-25 13:31:29 +00:00
John Crispin
c0c3f2d4c9 leds: support oneshot as well as timer triggers
oneshot and timer have the same configuration options, just a different
trigger name.

Signed-off-by: Karl Palsson <karlp@etactica.com>

SVN-Revision: 48770
2016-02-25 10:14:16 +00:00
Jo-Philipp Wich
117cef6d44 base-files: add netifd's default prelocal table to /etc/iproute2/rt_tables
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48685
2016-02-09 12:34:05 +00:00
Jo-Philipp Wich
4aeeead303 x86: preserve partition table on sysupgrade
With this patch sysupgrade will write directly to the partitions
instead of to the main disk.  The UUID is copied from the image
to the MBR as well.  This prevents the mbr from being completely
overwritten and losing the partition table.  The -p option has
been added to maintain the original behavior and overwite the
entire disk with the new image.  Tests have been added to ensure
that the image partitions match up with the active partitions.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 48682
2016-02-09 12:33:17 +00:00
Jo-Philipp Wich
cc289e0adb base-files: honor CONFIG_TARGET_INIT_PATH
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48678
2016-02-08 14:28:50 +00:00
John Crispin
e2fd1adaf5 base-files: For sysfixtime use hwclock if RTC available
On systems that have an RTC prefer it to the file-based time fixup (i.e.
use hwclock when there is a permanent clock instead of the faked up time
logic that is needed when there is not RTC).

We can't rely on hctosys kernel feature either as we're usually using
RTC as kernel modules which are usually being loaded after hctosys was
run, leading in the following error:

  hctosys: unable to open rtc device (rtc0)

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 48661
2016-02-08 08:25:53 +00:00
Felix Fietkau
f70c8ba198 base-files: set mac address in default network config via device sections
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48646
2016-02-07 14:18:43 +00:00
Felix Fietkau
57776e68ce base-files: remove default /etc/config/network, generate it via board.d instead
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48493
2016-01-25 16:30:41 +00:00
Felix Fietkau
b7ab6c66cc base-files: fix sysupgrade 'wget' handling for uclient-fetch
change 48451 tried to add support for uclient-fetch by moving
/usr/bin/wget to /bin/wget, but this change kept the symbolic
link to /bin/busybox as install_bin creates links to param 1

the desired fix is to link to uclient-fetch to wget:
  install_bin /bin/uclient-fetch /bin/wget

Signed-off-by: John Clark <inindev@gmail.com>

SVN-Revision: 48483
2016-01-25 12:35:21 +00:00
Felix Fietkau
f57419d26e base-files: fix sysupgrade 'wget' handling
with r48379 and r48386 the path of wget changed.
respect that and adjust the dirname.

this fixes #21680

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 48451
2016-01-22 09:41:58 +00:00
Jo-Philipp Wich
740a2ee163 base-files: Fix sysupgrade overlay saving
A previous change to sysupgrade moved the overlay files into upper/
The -c switch generates a list of files to backup, but the sed
calls did not take this into consideration.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 48281
2016-01-17 18:24:30 +00:00
John Crispin
3f78186f76 base-files: allow timezone to be overriden by zonename (proper zoneinfo support)
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 47980
2015-12-23 14:44:31 +00:00
Felix Fietkau
0936f5b0e0 base-files: cleanup mtd_get_mac_binary hexdump
Remove usage of dd, as per request from Yousong Zhou.
<https://lists.openwrt.org/pipermail/openwrt-devel/2015-December/037743.html>

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47949
2015-12-19 11:28:42 +00:00
Felix Fietkau
c74a690661 ar71xx: scan nand ubi partition for ath9k eeprom files
The MR18 stores the ath9k eeprom values on the NAND.
This patch makes it possible to retrieve the images
from there.

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47948
2015-12-19 11:28:36 +00:00
Felix Fietkau
ce98f1d264 base-files: drop the now unnecessary dependency on opkg/host
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47886
2015-12-13 17:03:51 +00:00
Jo-Philipp Wich
67e1c87012 all: drop old uci-defaults.sh
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
John Crispin
2f42d9e27d base-file: remove /tmp/.jail (now useless)
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>

SVN-Revision: 47855
2015-12-11 15:06:31 +00:00
John Crispin
ec6b85ca0e base-files: use max_brightness to set LED
LEDs which are controlled by a PWM need to use the supplied
max_brightness instead. Otherwise they might appear to be
very dim / broken.

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47854
2015-12-11 15:06:11 +00:00
Jo-Philipp Wich
08078df83d board.d: add support for gpio_switch sections
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47762
2015-12-04 15:02:32 +00:00
Jo-Philipp Wich
61a99da4f9 base-files: board.d: auto-set model id and name if /tmp/sysinfo is available
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47752
2015-12-04 11:06:57 +00:00
Jo-Philipp Wich
6c8daa6ba3 base-files: board.d: support dsl modems, atm bridges and pppoe protocol
This adds support for specifying the dsl modem, atm bridge configs and setting
the pppoe protocol for wan.

These additions are required to port the Lantiq target to board.d.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47750
2015-12-04 09:56:55 +00:00
Jo-Philipp Wich
527ec2af59 all: remove dummy ucidef_set_interface_loopback() from board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47744
2015-12-03 23:13:00 +00:00
Jo-Philipp Wich
f611358870 base-files: board.d: support specifiying the protocol of lan and wan
Some boards, e.g. the Sheeva Plug, require the lan interface to be set
to DHCP instead of a static address, therfore support that.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47732
2015-12-03 22:27:06 +00:00
Jo-Philipp Wich
ac9bed4bc0 base-files: board.d: support timer leds
Add ucidef_set_led_timer() and handling for it to config_generate.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47731
2015-12-03 22:27:02 +00:00
Jo-Philipp Wich
b3f8340a5e base-files: board.d: support ide leds
Add ucidef_set_led_ide() to define "ide-disk" triggered leds.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47729
2015-12-03 21:12:56 +00:00
Jo-Philipp Wich
734ae1bd17 base-files: uci-defaults-new.sh: fix for handling multiple ifnames
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47728
2015-12-03 21:12:51 +00:00
Jo-Philipp Wich
9b02e73188 board.d: merge ucidef_add_switch() and ucidef_add_switch_ports()
This changes uci-defaults-new.sh, config_generate and all relevant board.d
files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into
a single function.

Also removes now superfluous enable and reset arguments.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47721
2015-12-03 17:30:24 +00:00
Jo-Philipp Wich
d17a64c7c0 base-files: uci-defaults-new: remove reset/enable args of ucidef_add_switch()
Out of 69 switch definitions, only 3 pass something different than "1" as
values for reset and enable, with one of those three being invalid.

This change ...

 * removes the reset and enable arguments from ucidef_add_switch()
 * unconditionally writes reset:1 and enable:1 to JSON
 * converts the three users of nonstandard values to ucidef_add_switch_attr()

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47720
2015-12-03 17:30:08 +00:00
Jo-Philipp Wich
80f767d093 base-files: uci-defaults-new, config_generate: refactor code and drop old vlans
Remove support for now unused ucidef_add_switch_vlan(), move port->vlan and
vlan->interfaces conversion to uci-defaults-new.sh and massively simplify
config_generate.

This change prepares the following upcoming steps:

 * Eliminate use of ucidef_set_interface_lan_wan() for switch only devices
 * Merge ucidef_add_switch() with ucidef_add_switch_ports()

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47719
2015-12-03 16:25:19 +00:00
Jo-Philipp Wich
1871619e72 base-files: config_generate: add missing chunks of force tag support
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47718
2015-12-03 15:46:43 +00:00
Jo-Philipp Wich
73a4e0334c base-files: uci-defaults-new, config_generate: allow force tagged cpu ports
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47679
2015-11-30 12:32:12 +00:00
Jo-Philipp Wich
a826098e2b base-files: uci-defaults-new: only emit force_link for additional ifaces
Only se4t the force_link property for non-lan, non-wan ifaces as it is
unnecessary in the default cases.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47675
2015-11-30 10:55:43 +00:00
Jo-Philipp Wich
b64f953cd8 base-files: uci-defaults-new: fix unquoted variables
Properly quote variables in ucidef_set_interface_lan() and
ucidef_set_interface_lan(), otherwise interfaces with multiple devices
are not properly written into the configuration.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47673
2015-11-30 10:43:18 +00:00
Jo-Philipp Wich
cfac7289c7 base-files: uci-defaults-new: add board id and name helpers
Add ucidef_set_board_id() and ucidef_set_model_name() procedures to store
model information in the board.json file.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47671
2015-11-30 10:17:05 +00:00
Jo-Philipp Wich
0e0119b6f0 base-files: uci-defaults-new, config_generate: support for gpio leds
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47660
2015-11-26 13:53:06 +00:00
Jo-Philipp Wich
aa4c5fd2b0 base-files: config_generate: regroup led generator code
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47659
2015-11-26 13:53:02 +00:00
Jo-Philipp Wich
8b9e839955 base-files: uci-defaults-new: remove ucidef_set_led_interface()
The only user was the hg255d board and config_generate did not even emit
proper uci for it.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47658
2015-11-26 12:46:09 +00:00
Jo-Philipp Wich
972d3de148 base-files: config_generate: support rssi leds
Add support for emitting rssi monitor and led configuration sections.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47656
2015-11-26 12:04:43 +00:00
Jo-Philipp Wich
bd4c757685 base-files: uci-defaults-new: fix storing rssi leds and triggers in board.json
Remove extra nesting of rssi leds in the led object and move rssi monitor
declaration to its own object.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47655
2015-11-26 12:04:38 +00:00
Jo-Philipp Wich
92d414eb07 base-files: config_generate: reformat for better readability and quote variables
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47654
2015-11-26 12:04:32 +00:00
Jo-Philipp Wich
1e591ee6d1 base-files: uci-defaults-new: properly quote variables
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47652
2015-11-26 11:17:54 +00:00
Jo-Philipp Wich
a466bfe8f4 base-files: config_generate: handle switch port attributes and better group json_select
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47648
2015-11-25 15:43:50 +00:00
Jo-Philipp Wich
97baeb2fa4 base-files: config_generate: do not remove previously generated interfaces
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47647
2015-11-25 15:43:43 +00:00
Jo-Philipp Wich
63c2111e86 base-files: config_generate: properly handle multiple switches
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47646
2015-11-25 15:43:33 +00:00
Jo-Philipp Wich
04b8b97fff base-files: uci-defaults-new: add ucidef_add_switch_port_attr() helper
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47645
2015-11-25 15:43:28 +00:00
Jo-Philipp Wich
2f69fefc37 base-files: uci-defaults-new: whitespace cleanup
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47644
2015-11-25 15:43:21 +00:00
Jo-Philipp Wich
212feb9ccf base-files: uci-defaults-new: don't store switch attr numbers as strings
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47643
2015-11-25 15:43:15 +00:00
Jo-Philipp Wich
2d5dbf9b47 base-files: config_generate: support autogenerating vlans
Add support for generating vlans solely from the port layout description
given through ucidef_add_switch_ports().

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47639
2015-11-24 21:16:38 +00:00
Jo-Philipp Wich
d6b5ce48dd base-files: add ucidef_set_interface_wan() and ucidef_add_switch_ports()
Add further helper functions to uci-defaults-new.sh for easier declarations
of complex switch layouts.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47638
2015-11-24 21:16:35 +00:00
John Crispin
18691109df base-files: show hint when JFFS2-partition is full and overlayfs mounted read-only
since r45833 and r45848 the overlayfs is automatically mounted read-only
(and blocks remounts as r/w) when JFFS2 is full. see ticket #19564

because of this normal file deletion is not possible anymore.
if a user logins interactively (e.g. SSH) show a hint for this,
that files must be removed in /overlay/upper/...

v2: fix subject line

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 47623
2015-11-24 18:32:09 +00:00
Jo-Philipp Wich
6d3901bf76 base-files: config_generate: honour port_mask property (#20963)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47609
2015-11-24 13:39:53 +00:00
Felix Fietkau
b61e77aedd base-files: use the correct path in case of modified preinit options
If the user sets any preinit options in .config, the wrong path may get
applied due to wrong default value in image-config.in and due to Makefile
writing also the unchanged options into 00_preinit.conf

Modify the default path in image-config.in to match the current default
path set by r47080. Also modify the fall-back default in Makefile.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

SVN-Revision: 47590
2015-11-22 19:06:20 +00:00
Hauke Mehrtens
f1894ad167 base-files: add DCCP to /etc/protocols
Fixes this conntrackd warning:
WARNING: getprotobyname() cannot find protocol `DCCP' in /etc/protocols

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 47481
2015-11-15 22:09:13 +00:00
John Crispin
1c74d046ed base-files: create /var/tmp on boot
FHS mandates presence of /var/tmp on compliant systems.

The lack of /var/tmp was discovered when using MIT Kerberos libraries
which default to that location for storing credentials cache.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 47219
2015-10-19 10:09:46 +00:00
Steven Barth
468c1fb320 base-files: revert to default ECN settings
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 47160
2015-10-07 21:11:24 +00:00
John Crispin
ce9da6e6af base-files: add URL option for OEM manufacturer info
This URL can be embedded e.g. within UPnP announcements where a link
to the manufacturer's homepage is desired.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 47135
2015-10-05 10:28:53 +00:00
Steven Barth
d7023fc0bc base-files: sanitize and unify $PATH
Previously init and hotplug paths were different from console.

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 47080
2015-10-02 08:24:32 +00:00
Felix Fietkau
5da85f7a01 base-files: add a dependency on fstools
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47066
2015-09-28 09:40:39 +00:00
Felix Fietkau
b38194406f base-files: fix ramoverlay function with kernels 3.18+
Even though there are not many users left within the OpenWrt tree it seems
this function broke during the kernel 3.18 transition.

Fix it by providing a workdir as required by overlayfs.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 47015
2015-09-21 17:41:07 +00:00
Jo-Philipp Wich
33b3594332 base-files: refactor default_postinst()
- Simplify user spec parsing code
 - Alias IPKG_INSTROOT to shorten code
 - Quote variables where appropriate
 - Remove a useless-use-of-cat instance
 - Suppress errors in case control or list files are missing

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 46975
2015-09-16 08:43:58 +00:00
John Crispin
ef2f50829d base-files: add /etc/profile.d support
OpenWrt should support an optional /etc/profile.d directory like
most other Linux distributions. This allows packages to install
their own scripts into /etc/profile.d/ directory.

The file suffix should make clear, that these scripts
are (sourced) shell-snippets. If the user needs e.g. php or lua,
one must make sure that the interpreter is called.
The reverse failsafe test makes sure, that the effective returncode is 0.

A typcal usecase is the inclusion of private helpers,
special variables or aliases, which at the moment needs
patching the sourcecode and is not well maintainable.
Now the builder can simply add there files.

v1 initial work of Hendrik Lüth <hendrik@linux-nerds.de>
v2 changes regarding RFC (e.g. thomas.langer@lantiq.com)
v3 changes regarding RFC (e.g. mschiffer@universe-factory.net)
v4 keep it simple and mimic OpenWrt style

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 46965
2015-09-16 08:32:13 +00:00
John Crispin
4ef319fad2 base-files: sysupgrade: quote source image name
get_image() eval a filename without quoting it, resulting in errors with
filenames containing characters that need to be escaped.
    $ sysupgrade -T -f ./cfg\(12\).tar.gz img.bin; echo $?
    Image check 'platform_check_image' failed.
    Invalid config file. Please use only .tar.gz files
    1
    $ mv cfg\(12\).tar.gz cfg_12.tar.gz
    $ mv img\(1\).bin img.bin
    sysupgrade -T -f ./cfg_12.tar.gz img.bin; echo $?
    0

Enclose the content of $from in double quotes.

Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me>

SVN-Revision: 46919
2015-09-14 20:09:06 +00:00
Felix Fietkau
796a2d032b base-files: fix typo in core dump pattern sysctl entry (fixes #20489)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46890
2015-09-12 08:57:59 +00:00
Felix Fietkau
ced2b641e2 base-files: set kernel.core_pattern in sysctl.conf
Move the pattern setting from netifd's service script to
/etc/sysctl.conf.  Put the timestamp component '%t' just after
executable name '%e' for more natural order from output of ls command.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 46867
2015-09-11 16:35:17 +00:00
Rafał Miłecki
56c926223e base-files: change banner to Designated Driver release
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46846
2015-09-11 08:56:37 +00:00
Steven Barth
00045fe9d0 base-files: add /etc/iproute2/rt_tables, replace ifconfig-usage
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46830
2015-09-08 17:44:13 +00:00
Steven Barth
d196b1fc2e Disable telnet in favor of passwordless SSH
This enables passworldless login for root via SSH whenever no root
password is set (e.g. after reset, flashing without keeping config
or in failsafe) and removes telnet support alltogether.

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46809
2015-09-07 19:29:25 +00:00
Jonas Gorski
e1824f2543 base-files: allow setting ide-disk led trigger
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46794
2015-09-04 14:45:45 +00:00
Jo-Philipp Wich
3d1890053c base-files: add /etc/hosts entries for ::1, ff02::1 and ff02::2
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 46771
2015-09-02 11:54:03 +00:00
John Crispin
e83643d31c base-files: default_postinst: propagate the real postinst return code
Using the postinst script for sanity checks and expecting opkg to fail
if the postinst didn't return 0 was possible in Barrier Breaker, propagate
the real postinst return code through default_postinst to restore this
behaviour.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 46653
2015-08-17 06:17:23 +00:00
John Crispin
9b0516c9fc base-files: rework reset button script to indicate factory reset
With this change we let user know 5 seconds have passed and reset button
can be released (to trigger factory reset)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46650
2015-08-17 06:16:39 +00:00
Rafał Miłecki
567d2ab3f8 base-files: buttons: make power script return 0
It was missed in the r46471.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46582
2015-08-12 00:57:53 +00:00
John Crispin
e7b34b2b0d buttons: make all button handler scripts return 0
this is required by the new button timeout feature

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46471
2015-07-24 09:11:35 +00:00
John Crispin
cf4a0d430b base-files: fix /tmp/.jail permissions
We need a+x rights on the path to the root of the jails
so we can use users other than root (like nobody)

This partly fixes jailed dnsmasq

Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>

SVN-Revision: 46466
2015-07-24 09:11:00 +00:00
John Crispin
d0d3ca2a1b base-files: added option to configure the gpio led trigger in uci-defaults
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 46341
2015-07-14 07:35:59 +00:00
John Crispin
d65916047b base-files: implemented basic GPIO control
Internal GPIO pins are used for PoE passthrough setups in multi-port
routers. This patch implemnets control over this hardware feature for
Ubiquiti Nanostations and TP-Link CPE510.

Signed-off-by: Lars Kruse <lists@sumpfralle.de>

SVN-Revision: 46271
2015-07-08 14:25:52 +00:00
John Crispin
3787c32183 sysctl: read settings from /etc/sysctl.d/*.conf
This changes makes it possible to store custom settings
in individual files inside the directory /etc/sysctl.d/.

Signed-off-by: Stefan Tomanek <stefan.tomanek+openwrt@wertarbyte.de>

SVN-Revision: 46239
2015-07-07 13:47:23 +00:00
Felix Fietkau
908e1b4c41 base-files: add openwrt snapshot key
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45905
2015-06-05 18:21:53 +00:00
John Crispin
f57076956e base-files: default_do_upgrade: accept & forward image extraction command
get_image allows passing 2nd argument that is used in a pipe for
extracting firmware from a non-native format. By accepting such command
in default_do_upgrade we allow platforms to use this helper for vendor
specific images.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45900
2015-06-05 14:12:05 +00:00
Luka Perkov
0a4bcd5be6 base-files: remove ubi tool
ubi tool was removed from fstools in r41128.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45813
2015-05-29 08:14:38 +00:00
Jonas Gorski
d0af85c9a5 base-files: fix default pre-/postrm for packages with a dot
Instead of stripping everything after the first dot, strip everything
after the last dot.
This fixes pre-/postrm actions for packages with a dot in their name,
like libusb-1.0.

Fixes #19668.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45702
2015-05-19 09:13:17 +00:00
Felix Fietkau
2659762e62 base-files: fix logic error in led default handling (patch from #19593)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45600
2015-05-03 18:04:27 +00:00
Felix Fietkau
2d4fa6c055 base-files: make the generic sysinfo script run earlier to allow the mount_root script to pick up the board name
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45496
2015-04-18 20:14:38 +00:00
Felix Fietkau
93fb3cac1b base-files: reorder led trigger/brightness writes
Depending on configuration, disable the LED before writing the trigger
and enable it after writing it. Fixes LEDs where the value defaults to 1

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45463
2015-04-16 20:09:30 +00:00
Felix Fietkau
b3d699bdd3 base-files: add generic preinit script to extract board/model info from device-tree
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45462
2015-04-16 20:09:21 +00:00
John Crispin
bbad3f360e modules: fix postinst generation for kernel modules
Fixes ticket #19352.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45367
2015-04-10 20:39:44 +00:00
John Crispin
5d8f9e03f1 base-files: add support for platform_pre_upgrade function
Current NAND sysupgrade process is a bit hard to follow due to the way
of triggering stage1. Currently this is done by leaving a /mark/ in the
form of /tmp/sysupgrade-nand-path during nand_do_platform_check.
Existence of this mark stops standard sysupgrade process (as the result
of sysupgrade_pre_upgrade exit). This may be a bit misleading.

Proposed solution adds a new function that will allow platform.sh
trigger NAND sysupgrade consciously. This will also allow cleaning
nand_do_platform_check limiting it to just checking the image.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45338
2015-04-09 14:33:03 +00:00
Felix Fietkau
beca028bd6 build: add integration for managing opkg package feed keys
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45286
2015-04-06 19:39:51 +00:00
Nicolas Thill
fe46689f10 packages: use $(LN) macro, make symlinks relative
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 45250
2015-04-03 00:07:43 +00:00
Nicolas Thill
11d4a00c88 base-files: add more config files to conffiles section
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 45244
2015-04-02 14:53:24 +00:00
John Crispin
4cf7929869 base-files: add a init.d option that will start the syscall tracer
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45009
2015-03-26 10:58:17 +00:00
John Crispin
5b23cfab73 base-files: create jail folder on boot
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45008
2015-03-26 10:58:11 +00:00
Felix Fietkau
889e1e4bff fstools: update to the latest version, makes interrupted first boot more reliable
Use xattr to store the filesystem initialization state of the overlay.
As long as the filesystem is not marked as initialized yet (happens in
/etc/init.d/done), all overlay data (except for sysupgrade.tgz) will be
discarded before the system is allowed to boot

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44942
2015-03-22 15:11:27 +00:00
Felix Fietkau
bc1fc688af base-files: keep sysupgrade.tgz until /etc/init.d/done has been called
This makes interrupted boots after sysupgrade more reliable

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44941
2015-03-22 15:11:20 +00:00
Felix Fietkau
f30358d41a kernel: remove the netfilter optimization that skips the filter table, it has caused too many issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44873
2015-03-17 17:14:48 +00:00
Luka Perkov
17610e7430 base-files: firstboot: pass down arguments such as -y to jffs2reset
This brings back old behavior.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44651
2015-03-10 23:43:25 +00:00
John Crispin
eea462106f uci-defaults: add ucidef_set_led_mmc
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44446
2015-02-14 20:47:58 +00:00
Jo-Philipp Wich
e3744a7cc7 base-files: fix target/subtarget value in /etc/openwrt_release
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44409
2015-02-11 15:12:32 +00:00
John Crispin
5cd8a482f3 base-files: default_postinst() fix variable colision
The name variable contains at first the package name,
and after the last group name.
This patch fixes /etc/rc.d symlink creation (at least).

Change name in pkgname, change the other name in ugname
(user group name), and id in ugid (user group id)

Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>

SVN-Revision: 44253
2015-02-04 06:10:06 +00:00
Jo-Philipp Wich
4ec8d515b2 include, base-files: align default repository url with changed buildbot structure
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 44091
2015-01-23 13:09:54 +00:00
John Crispin
b54f3ad6e7 base-files: fix led script to skip missing triggers
this is based on http://patchwork.ozlabs.org/patch/424451/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44087
2015-01-23 12:33:04 +00:00
John Crispin
29207748b9 base-files: Use 200ms LED timing as before for the new phase preinit_regular.
This restores normal pre-r43715 200ms blink-period for the System LED we're all accustomed to see while our OpenWrt routers are booting.

Failsafe possibility will now be signalled with a new 100ms blinking, which is easily recognizable from the normal 200ms booting.

So no existing user will be scared by a new 500ms LED pattern, since such a slow pattern could easily be mistaken for something wrong... I was like "ok why my router is collapsing now, is this a bad flash, a kernel panic, or what else" when I've seen it for the first time ;)

Sorry for not having explained myself better in v1 of this patch.

Original:
Preinit, failsafe is possible: 200ms
Preinit, failsafe not possible anymore, booting normally: 200ms
Failsafe entered: 50ms

Now (after preinit_regular has been introduced):
Preinit, failsafe is possible: 200ms
Preinit, failsafe not possible anymore, booting normally: 500ms *here is the "offending" change*
Failsafe entered: 50ms

With my proposed patch:
Preinit, failsafe is possible: 100ms *indicate this condition with a new timing, that prompts the user to press the key if they want to start failsafe*
Preinit, failsafe not possible anymore, booting normally: 200ms *keep this as before*
Failsafe entered: 50ms

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 44056
2015-01-20 06:54:53 +00:00
John Crispin
744298b8a0 base-files: Add ucidef_set_led_timer to uci-defaults.sh
Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 44000
2015-01-17 13:58:14 +00:00
John Crispin
31eadd07f2 base-files: Fix switch settings for uci-defaults-new.sh.
The enable and reset settings need to be added even when they're false. This is true at least for 'enable', that seems to default to true otherwise.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 43887
2015-01-08 20:26:52 +00:00
Jo-Philipp Wich
3f26960a5c base-files: update default url template and complete kconfig help
Change the kconfig default for the repository url template to use "%s"
instead of "%T" as well.

Also complete the kconfig help text do cover the recently introduced
manufacturer, product and hwrev options.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43872
2015-01-08 12:46:44 +00:00
Jo-Philipp Wich
15d8db1f8c build: add version number to filenames
This commit introduces a new option CONFIG_VERSION_FILENAMES which causes
OpenWrt to embed the version number in generated image files, SDK- and
ImageBuilder archives.

The option is enabled by default if CONFIG_VERSIONOPT is set.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43869
2015-01-08 11:02:00 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
John Crispin
f76755da3f packages: fix typo in OpenWrt name
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 43542
2014-12-07 16:53:30 +00:00
John Crispin
b0d2a9e77a base-files: default_postinst() - create user:group first (resend)
create user:group before running postinst-pkg. the postinst hook might require
the user:group to already exist.

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>

SVN-Revision: 43472
2014-12-01 16:15:13 +00:00
Imre Kaloz
2e3b84c3b5 fix sysupgrade on overlayfs v23+
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43365
2014-11-24 15:55:52 +00:00
Jonas Gorski
02c6798a0d base-files: supress errors from ldd
ldd might be called for shell scrips during sysupgrade, causing it to
complain that they are not a dynamic executables.

This is a harmless error, so supress it to avoid confusing about them
being serious ones.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43315
2014-11-19 12:17:37 +00:00
Jonas Gorski
2e95b1fda7 base-files: properly fix copying ld*.so with eglibc
r36107 ("base-files: sysupgrade fail with eglibc") tried to fix
sysupgrade by changing the ld-soname to what is expected, but only
fixed MIPS while breaking ARM.

The underlying issue is that the ld.so name varies widely across
different architectures for eglibc:

eglibc-2.19-r25243$ grep -r "ld-soname :=" . | awk '{ print $3 }' | sort -u
ld64.so.1
ld64.so.2
ld-linux-aarch64_be.so.1
ld-linux-aarch64.so.1
ld-linux-armhf.so.3
ld-linux-mipsn8.so.1
ld-linux.so.2
ld-linux.so.3
ld-linux-x32.so.2
ld-linux-x86-64.so.2
ld.so.1

Instead of adding each different soname to check for and copy it,
replace the awk script with a sed script to extract it properly and
drop the hardcoded so-name.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43295
2014-11-18 15:19:46 +00:00
Nicolas Thill
f4417f7ad8 package/*: replace occurences of 'ln -sf' to '$(LN)'
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 43205
2014-11-06 19:35:34 +00:00
John Crispin
74a3a77bcd license info - revert r43155
turns out that r43155 adds duplicate info.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43167
2014-11-03 09:56:44 +00:00
John Crispin
c10d97484a Add more license tags with SPDX identifiers
Note, that licensing stuff is a nightmare: many packages does not clearly
state their licenses, and often multiple source files are simply copied
together - each with different licensing information in the file headers.

I tried hard to ensure, that the license information extracted into the OpenWRT's
makefiles fit the "spirit" of the packages, e.g. such small packages which
come without a dedicated source archive "inherites" the OpenWRT's own license
in my opinion.

However, I can not garantee that I always picked the correct information
and/or did not miss license information.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43155
2014-11-03 08:01:08 +00:00
Steven Barth
bec9d38fa4 Add a few SPDX tags
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43151
2014-11-02 12:20:54 +00:00
John Crispin
5a6433cc6c base-files: config_generate did not handle setups with more than 1 switch properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43088
2014-10-27 15:51:17 +00:00
Felix Fietkau
7a5002ec9d base-files: add /etc/shadow to list of essential files to keep in sysupgrade (bug 18206)
Based on bug #18206 sysupgrade can lead to loss of password information in
certain situations. Most likely all users who will upgrade from versions
r43017-43040, will lose their current passwords. :-(
https://dev.openwrt.org/ticket/18206

Currently /etc/shadow is defined as a conffile in base-files:
https://dev.openwrt.org/browser/trunk/package/base-files/Makefile#L37

But it is not defined in the default list of essential files to keep in
sysupgrade:
https://dev.openwrt.org/browser/trunk/package/base-files/files/lib/upgrade/keep.d/base-files-essential

If exporting conffiles info fails, /etc/shadow can get lost.

Shadow passwords are now the default, so saying that preserving /etc/passwd
is essential while /etc/shadow is not, makes no sense.

The attached patch adds /etc/shadow to the list of essential files.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

SVN-Revision: 43061
2014-10-25 17:22:46 +00:00
Felix Fietkau
99a651fd50 base-files: fix telnet login on musl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43006
2014-10-20 15:07:19 +00:00
John Crispin
829bf6b9a1 failsafe-mode: print short help on commandline
[base-files] failsafe-mode: print short help on commandline

Like mentioned in ticket https://dev.openwrt.org/ticket/11911
this should make the IRC much quieter. Failsafe is somehow
special and even experienced users are helpless, because they
are not used to this seldom situation. Also: likely you have
no internet access in this mode, so you cannot use the wiki.

a failsafe-session now looks like this:
first we see from 'package/base-files/files/bin/login.sh' the hint:

 === IMPORTANT ============================
  Use 'passwd' to set your login password
  this will disable telnet and enable SSH
 ------------------------------------------

after this the /etc/banner ("OpenWrt - wireless freedom")
and then the new text:

================= FAILSAFE MODE active ================
special commands:
* firstboot          reset settings to factory defaults
* mount_root     mount root-partition with config files

after mount_root:
* passwd                         change root's password
* /etc/config               directory with config files

for more help see:
http://wiki.openwrt.org/doc/howto/generic.failsafe
=======================================================

this supersedes the old patches:
http://patchwork.openwrt.org/patch/3337/
http://patchwork.openwrt.org/patch/3553/

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 42985
2014-10-20 06:29:05 +00:00
Felix Fietkau
0ef474a118 base-files: fix ldd definition if /usr/bin/ldd exists
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42976
2014-10-19 21:46:08 +00:00
Jo-Philipp Wich
4f73613c26 build: improve feed handling for opkg.conf
- Consider not installed feeds as well
 - Add option to decide whether to comment disabled feeds

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 42931
2014-10-16 10:30:16 +00:00
John Crispin
666659fb31 default_postinst() fix wrong call of group_add
[base-files] default_postinst() fix wrong call of group_add
after 12bae65d07d29854204715cebc1ef1eae237fd9b group_add is
always called. shell scripting can be tricky...

wrong call:
[ -n "$gid" ] && group_exists $name || group_add $name $gid

this leads to a call of 'group_add' when $gid is emtpy, proof:

root@box:~ functionA() { echo A; }
root@box:~ functionB() { echo B; }
root@box:~ VAR=
root@box:~ [ -n "$VAR" ] && functionA || functionB
B
root@box:~ # functionB was called, but VAR is not filled
root@box:~ VAR=filled
root@box:~ [ -n "$VAR" ] && functionA || functionB
A

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 42926
2014-10-15 17:55:13 +00:00
John Crispin
d099a34980 base-files: default_postinst() force clear luci-indexcache
Inside every LuCI package you need to clear luci-indexcache and
sometimes when installing non LuCI pacakges it's also needed to clear
it. Easier put it into default_postinst().

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>

SVN-Revision: 42923
2014-10-14 19:01:30 +00:00
John Crispin
5efe2e5e3c base-files: the USERID code path did not check for duplicate groups
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42919
2014-10-14 19:01:05 +00:00
John Crispin
20940138ac scripts: fix wrong usage of '==' operator
[base-files] shell-scripting: fix wrong usage of '==' operator

normally the '==' is used for invoking a regex parser and is a bashism.
all of the fixes just want to compare a string. the used busybox-ash
will silently "ignore" this mistake, but make it portable/clean at least.

this patch does not change the behavior/logic of the scripts.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 42911
2014-10-14 12:21:11 +00:00
Steven Barth
14e6559eee base-files: add network_get_ipaddrs_all()
Return all IPv4 and IPv6 addresses.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 42856
2014-10-09 07:16:29 +00:00
Steven Barth
c118e5edf4 network: Unbind DHCPv6 from underlying interfaces
This allows IPv6 to set up without IPv4 being up thus
IPv6-only or IPv6+DS-Lite working with the default config.

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42848
2014-10-08 13:08:05 +00:00
John Crispin
a3bf98495a base-files: extend USERID:=syntax
it is now possible to inlie the uid and gid in the syntax

USERID:=username=uid:group=gid:group2=gid2:...

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42838
2014-10-08 08:01:28 +00:00
John Crispin
f9cccd2c14 base-files: make postinst script run inside a subshell
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42800
2014-10-06 05:55:35 +00:00
John Crispin
7860c9707a sysupgrade: preserve symlinks in backups
Signed-off-by: Catalin Patulea <catalinp@google.com>

SVN-Revision: 42783
2014-10-06 04:51:56 +00:00
Steven Barth
8a971b2770 base-files: remove a 'not found' error message during system boot
During boot, a not found message is displayed for systems which do
not have uci 'network.globals.ula_prefix' defined in
/etc/config/network. The error message itself is not used and can
be ignored.

Signed-off-by: Michel Stam <m.stam@fugro.nl>

SVN-Revision: 42755
2014-10-03 10:56:43 +00:00
Florian Fainelli
bc96c49c67 base-files: add a protocol argument to ucidef_set_interface_raw
Add a third argument to ucidef_set_interface_raw, which is specifying
the protocol.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42665
2014-09-25 19:08:56 +00:00
John Crispin
44249f71a8 postinst trigger: the new postinst trigger broke IB
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42571
2014-09-16 11:56:19 +00:00
Luka Perkov
a8b6ca8797 base-files: whitespace fixes
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42542
2014-09-14 23:15:00 +00:00
John Crispin
d6dbc22bbc ipkg: add a default postinst/prerm script
the postinst script enables/starts the init.d scripts upon package installation
and installs the users required by the package.

the prerm script stops and disables the init.d scripts.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42470
2014-09-11 12:27:49 +00:00
John Crispin
2ae05c57f8 package/*: remove useless explicit set of function returncode
somebody started to set a function returncode in the validation
stuff and everybody copies it, e.g.

myfunction()
{
	fire_command

	return $?
}

a function automatically returns with the last returncode,
so we can safely remove the command 'return $?'. reference:

http://tldp.org/LDP/abs/html/exit-status.html
"The last command executed in the function or script determines the exit status."

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 42278
2014-08-25 06:35:50 +00:00
John Crispin
2d286dad6e base-files: properly generate the ula
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42261
2014-08-22 14:19:07 +00:00
Steven Barth
929e73c7b6 base-files: increase igmp_max_memberships to improve multicast-proxy handling
SVN-Revision: 42227
2014-08-20 10:18:40 +00:00
John Crispin
9ba6cd186a base-files: fix inverse logic in board_detect script
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42220
2014-08-19 09:59:39 +00:00
John Crispin
db6a292d4c base-files: wan6 should reference wan intead of referencing itself.
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42199
2014-08-18 13:16:35 +00:00
John Crispin
562d9f9582 base-files: add a hardware detection layer
this allows targets to use the new uci-default helper which will generate
a file called /etc/board.json. a tool called /bin/config_generate can then
be used to generate the default uci settings.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42185
2014-08-18 13:09:17 +00:00
Jo-Philipp Wich
f63509ac89 base-files: /lib/functions/network.sh: fix network_get_ipaddr6
When looking for the first ipaddr also consider the current prefix just
like network_get_ipaddrs6 does. If ipv6-address was empty the function
did not return the first ipaddr even if the list was non-empty.

fixes commit 83e9122f88a002871d5cdf421cf6aa6052b7e006

Signed-off-by: Henning Schild <henning@hennsch.de>

SVN-Revision: 42139
2014-08-11 18:15:18 +00:00
Jo-Philipp Wich
01fd962745 build: enable PER_FEED_REPO by default
Enable the separate feed repositories by default to align custom builds with the repositories
available on the snapshot download server.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 42112
2014-08-11 09:15:17 +00:00
Felix Fietkau
517ad9ff0d base-files: enable option to skip the netfilter "filter" table for established connection packets by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42048
2014-08-07 19:30:36 +00:00
Jo-Philipp Wich
960b7643c9 build: add new option to add disabled feeds commented out to opkg.conf
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 42004
2014-08-06 09:12:37 +00:00
Jo-Philipp Wich
a720dd209f build: introduce per feed repository support
This changeset implements a new menuconfig option to generate separate
repositories for each enabled package feed instead of one monolithic one.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 42002
2014-08-05 11:24:24 +00:00
Felix Fietkau
d5653558ac base-files: properly escape strings for version info
Make sure they don't break the sed command, and also make device_info
and openwrt_release more robust for parsing by scripts

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41885
2014-07-29 13:30:23 +00:00
Felix Fietkau
dbb77e39a0 base-files: add extra version configuration options for OEM manufacturer info
Creates /etc/device_info which will be used to fill in information for
WPS and other protocols that need manufacturer/device information

This helps with creating OpenWrt firmware for OEM or rebranded devices.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41884
2014-07-29 13:30:12 +00:00
Imre Kaloz
ad27df85b7 BB is branched, get ready for Chaos Calmer
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41870
2014-07-29 08:24:57 +00:00
John Crispin
3c9cfbeebd base-files: Remove stale calls to start() in initscripts.
based on http://patchwork.openwrt.org/patch/5969/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41840
2014-07-26 20:36:15 +00:00
Gabor Juhos
69abf630cf base-files: strip quotes from the MAC address in macaddr_canonicalize()
Extracted from http://patchwork.openwrt.org/patch/5716/

Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41639
2014-07-14 10:25:49 +00:00
Felix Fietkau
59cfa05bf3 base-files: adjust the default netfilter tcp established connection timeout as per RFC 5382 (#17098)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41599
2014-07-13 10:24:34 +00:00
John Crispin
be26421f45 sysupgrade: Enable killing of all processes under upgraded
If the sysupgrade scripts is called under upgraded, it will not kill all
other processes as it should to avoid interference by locked filesystem.
This patch checks the parent and if it is upgraded, it kills all.

Signed-off-by: André Valentin <avalentin@marcant.net>

SVN-Revision: 41563
2014-07-10 19:16:27 +00:00
Felix Fietkau
d288a7903d rc.common: when reloading a service using procd, fall back to calling start instead of restart
This avoids unnecessary service restarts

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41490
2014-07-03 06:21:49 +00:00
John Crispin
66ae4803e2 base-files: fix ramfs / nand upgrade
/lib/{imx6,lantiq,...}.sh are needed in the ramfs for sysupgrade to work.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41440
2014-07-01 10:26:14 +00:00
Luka Perkov
be2a057787 base-files: define yes/no as valid boolean options
ubox validate_data defines yes/no as valid boolean options, do the same in
config_get_bool too.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41405
2014-06-29 23:05:05 +00:00
John Crispin
818e38625f base-files: add enabled config option for ntp service
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41354
2014-06-27 07:52:06 +00:00
John Crispin
3a9bfa5938 base-files: add a post start hook to the procd init.d api
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41344
2014-06-26 11:43:30 +00:00
Luka Perkov
3fea61afe8 base-files: update copyright headers
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41334
2014-06-24 18:18:50 +00:00
John Crispin
09273f5c0a base-files: regenerate the /lib64 symlink when switching to a ramdisk
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41284
2014-06-20 13:41:08 +00:00
Jo-Philipp Wich
7eb721425e base-files: depend on jsonfilter and rewrite network.sh to use it
Switches /lib/functions/network.sh from jshn based json parsing to
jsonfilter expression while keeping the existing api.

Expensive methods like "network_find_wan" are up to 20x faster now.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 41281
2014-06-19 16:06:44 +00:00
John Crispin
4b1c48bc93 base-files: add upgraded to the list of daemons not killed
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41268
2014-06-19 14:12:55 +00:00