Commit graph

325 commits

Author SHA1 Message Date
Florian Fainelli
9e40952c92 ar71xx: fix Netgear initramfs images
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37230
2013-07-10 17:18:03 +00:00
Florian Fainelli
399283f875 ar71xx: fix some more issues with initramfs images
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37229
2013-07-10 15:22:47 +00:00
Gabor Juhos
446a962481 ar71xx: fix partition layout on Netgear WNDAP360
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37193
2013-07-08 08:40:20 +00:00
Luka Perkov
7b6e3df6ab ar71xx: $(KDIR_TMP) must be present before starting initramfs build
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37155
2013-07-04 12:48:52 +00:00
Florian Fainelli
c627ae768e ar71xx: only invoke Initramfs building when enabled
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37129
2013-07-02 10:43:31 +00:00
Florian Fainelli
460233fa2a ar71xx: fix initramfs images generation after r37049
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37120
2013-07-01 15:37:25 +00:00
Florian Fainelli
6a4f2922f6 targets: prepare for supporting normal and initramfs images
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
Gabor Juhos
d19dae6e2d ar71xx: add profile and build image for the Archer C7 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36790
2013-05-30 16:23:10 +00:00
Gabor Juhos
6ff976a87a ar71xx: add profile and build image for the DIR-601-B1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36786
2013-05-30 16:19:30 +00:00
Gabor Juhos
424c4c0b0a ar71xx: allow to build CameoHornet images for multiple regions
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36785
2013-05-30 16:19:29 +00:00
Gabor Juhos
184dd34b6d ar71xx: allow to override fw version in CameoHornet profile
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36784
2013-05-30 16:19:28 +00:00
Gabor Juhos
cc7bedf8a3 ar71xx: fix TL-MR10U usb power
MR10U is closer to MR3040 than WR703N. This changes also
enable USB power on GPIO18.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36726
2013-05-26 16:37:59 +00:00
Gabor Juhos
0842478e44 ar71xx: add TP-LINK TL-MR10U
Small router with 4MB flash, 32MB RAM
http://www.tp-link.com.cn/product_300.html

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36722
2013-05-26 16:02:26 +00:00
Gabor Juhos
cb3d71ca8e ar71xx: use combined kernel image in the CameoHornet template
This allow us to increase the kernel partition size,
and ensures, that the -factory image still usable via
the original interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36584
2013-05-08 17:11:10 +00:00
Gabor Juhos
f938a798f8 ar71xx: add profile and build image for the RNX-N360RT board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36582
2013-05-08 17:07:19 +00:00
Gabor Juhos
c70694e755 ar71xx: add profile and build image for Netgear WNDAP360
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36580
2013-05-08 17:03:43 +00:00
Gabor Juhos
d09ba5ef10 ar71xx: Fix AP135 partition layout
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36575
2013-05-08 08:53:49 +00:00
Gabor Juhos
b29b7b65ea ar71xx: add profile and build image for WNR2000v3
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36460
2013-04-26 17:00:53 +00:00
Gabor Juhos
183e2af1c7 ar71xx: add profile and build image for the TL-WR720N v3 board
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36458
2013-04-26 17:00:50 +00:00
Gabor Juhos
d614f8a880 ar71xx: build images for the TL-MR11U v2
[juhosg: use different profile name for v1 and v2, and add
multi profile to build for both versions]

Signed-off-by: Guilhem Lettron <guilhem@lettron.fr>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36038
2013-03-15 14:35:52 +00:00
Gabor Juhos
44cc1507e9 ar71xx: makefile changes to build image for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3440/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35964
2013-03-11 15:55:25 +00:00
Gabor Juhos
257bfc21af ar71xx: add profile support for dir-835-a1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35959
2013-03-11 15:55:17 +00:00
Luka Perkov
120028af99 ar71xx: enable building ramdisk images for WZRHPG30XNH board types
Signed-off-by: Luka Perkov <luka@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35874
2013-03-04 11:37:28 +00:00
Luka Perkov
a5ebfc79ba ar71xx: rework changes from r35840
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35865
2013-03-03 21:59:34 +00:00
Luka Perkov
107e0c6d1f ar71xx: add support for Buffalo WZR 600DHP
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 35840
2013-03-01 13:46:01 +00:00
Gabor Juhos
f7879cd8d8 ar71xx: add profile and build image fot the TL-WA830RE v1 board
Added support for the TP-LINK TL-WA830RE v1 Range Extender.
Based on the WA901ND v1 support. Hardware IDs checked against
original firmware. Patch was successfully tested on hardware.

Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35789
2013-02-25 20:37:35 +00:00
Jonas Gorski
b91eab631b ar71xx: print image build warnings/errors to stderr
Makes warnings/errors visible when building with V=w/V=1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35719
2013-02-21 11:45:29 +00:00
Gabor Juhos
7484006498 ar71xx: fix factory image creation for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35589
2013-02-13 16:36:26 +00:00
Gabor Juhos
7c87d28054 ar71xx: fixes whitespaces for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35455
2013-02-02 15:02:19 +00:00
Gabor Juhos
9a438b2271 ar71xx: build images for the TP-LINK TL-WR743ND v2
AR9331 based, these same as 741v4

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35449
2013-02-02 10:01:15 +00:00
Gabor Juhos
492cbcdd6b ar71xx: build image for the TL-WDR3500 board
Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35425
2013-02-01 15:50:34 +00:00
Gabor Juhos
f7ff677169 ar71xx: add profile and build image for dir-825-c1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35403
2013-01-29 22:50:57 +00:00
Gabor Juhos
da9a704e92 ar71xx: add profile and generate images for the AP132 board
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35397
2013-01-29 19:12:34 +00:00
Felix Fietkau
8ce8960959 ar71xx: sync kernel sizes where possible to fix images for some devices (#12874)
SVN-Revision: 35309
2013-01-23 16:29:25 +00:00
Gabor Juhos
a3a6e0f039 ar71xx: Build the AP135 images
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34919
2012-12-29 16:02:28 +00:00
Gabor Juhos
f5b1cba606 ar71xx: build image for the AP136-020
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34886
2012-12-26 09:50:37 +00:00
Gabor Juhos
c887a7fe4e ar71xx: rename AP136 to AP136-010
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34883
2012-12-26 09:50:31 +00:00
Gabor Juhos
cf99770800 ar71xx: build image for the TL-MR3220 v2
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

[juhosg: reorder MR3220 MultiProfile entry]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34782
2012-12-19 08:50:44 +00:00
Gabor Juhos
149534f3ed ar71xx: image: add OpenMesh profile
It allows to build firmware images for all OpenMesh
products in one step.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34761
2012-12-18 15:16:05 +00:00
Gabor Juhos
61d715505c ar71xx: add profile and build image for UniFi AP Pro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34730
2012-12-17 12:28:21 +00:00
Gabor Juhos
d085aad288 ar71xx: add profile and build initramfs image for the WNDR4300
It is not yet possible to use the default squasfsh/jffs2 images
on NAND flashes, so only initramfs image is supported for now.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34650
2012-12-12 16:49:52 +00:00
Gabor Juhos
d7ba2b4840 ar71xx: add profile and build image for TP-LINK TL-WA801N/ND
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34576
2012-12-07 19:10:56 +00:00
Gabor Juhos
68b5aa2fdf ar71xx/image: provide lzma compressed elf kernel image
This will be used on the RB4xx/RB7xx/RB2011 boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34272
2012-11-20 12:17:43 +00:00
Gabor Juhos
97867f8717 ar71xx/image: relink loader.elf image to LOADADDR
This allows to load the resulting image directly
from RouterBOOT.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34271
2012-11-20 12:17:41 +00:00
Gabor Juhos
d577d69838 ar71xx: use custom LZMA dictionary size for WNDR3700 images
Based on a patch by Hannu Nyman.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34248
2012-11-18 20:25:13 +00:00
Gabor Juhos
31881357af ar71xx: create profile and build image for the OpenMesh MR600 board
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34237
2012-11-18 09:32:41 +00:00
Gabor Juhos
d325e622d2 scripts/om-fwupgradecfg-gen.sh: add support for the MR600
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34233
2012-11-18 09:32:36 +00:00
Gabor Juhos
7da001d068 scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh
It will be used for non OM2P boards as well.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34200
2012-11-14 14:18:33 +00:00
Gabor Juhos
ee94ed4597 ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34198
2012-11-13 20:57:19 +00:00
Gabor Juhos
7ab0e1566f ar71xx: add profiles and build images for old PowerCloud System devices
[juhosg:
  - use 'PowerCloud Systems' instead of 'PCS' in the profiles
  - sort SingleProfile instances in image/Makefile]

Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34195
2012-11-13 20:57:15 +00:00