Commit graph

27 commits

Author SHA1 Message Date
Rafał Miłecki
75b8e247e3 bcm53xx: try to fix network on Asus RT-AC87U
This device seems to have switch port 7 connected to the CPU:
vlan1ports=1 2 3 5 7*
vlan2ports=0 7u
it should be handled by eth1 and NVRAM seems to confirm that (no
et0macaddr entry, existing et1macaddr & et1phyaddr entries).

One of the remaining ports (4/8?) may be connected to the Quantenna SoC.
Original firmware boot log contains following messages:
(0x00,0x5d)Port 5 States Override: 0xfb
(0x00,0x5f)Port 7 States Override: 0xfb
(0x00,0x0e)Port 8 States Override: 0x0a
(why does it force port 5 state?!)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45692
2015-05-16 17:14:25 +00:00
Rafał Miłecki
2d3aaa2d2f bcm53xx: fix default network interface on Netgear R8000
It has 3 Ethernet interfaces, each of them connected to separated switch
port. Default NVRAM uses switch port 8 as CPU which is connected to the
3rd interface (eth2).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45681
2015-05-13 13:11:04 +00:00
Rafał Miłecki
33e597b241 bcm53xx: sort ports from NVRAM entries before matching them
Some devices have unsorted ports which may lead to broken config.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45575
2015-04-24 07:47:25 +00:00
Rafał Miłecki
866fe3895d bcm53xx: sysupgrade: check if new kernel fits partition size
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45547
2015-04-21 11:21:34 +00:00
Rafał Miłecki
457d9caf4d bcm53xx: sysupgrade: improve NAND warnings
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45546
2015-04-21 11:04:38 +00:00
Rafał Miłecki
a86e7330dc bcm53xx: sysupgrade: drop some debugging message
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45544
2015-04-21 08:34:25 +00:00
Rafał Miłecki
688c1d74b9 bcm53xx: sysupgrade: allow flashing NAND devices without --force
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45543
2015-04-21 08:32:59 +00:00
Rafał Miłecki
d263c8e1a9 bcm53xx: sysupgrade: support flashing TRX with UBI image
Signed-off-by: Dan Haab <dhaab@luxul.com>

SVN-Revision: 45542
2015-04-21 08:20:06 +00:00
Rafał Miłecki
9e03c36259 bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45473
2015-04-17 06:03:00 +00:00
Felix Fietkau
c64fdadea7 bcm53xx: make use of the new board detection layer
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45458
2015-04-16 12:18:34 +00:00
Rafał Miłecki
3edb55143d bcm53xx: add (disabled) support for upgrading kernel during sysupgrade
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45445
2015-04-14 20:50:59 +00:00
Rafał Miłecki
3cb8bf44e6 otrx: change command line API to start with a mode
This will allow adding more modes without options conflict.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45443
2015-04-14 20:50:46 +00:00
Rafał Miłecki
77c75e6fa3 bcm53xx: try to handle Netgear R8000 VLANs config
It seems to have few ports connected to CPU (only for CPU sending data?)
as part of "SMP dual core 3 GMAC setup" feature.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45403
2015-04-12 20:11:25 +00:00
Rafał Miłecki
95ef64a779 bcm53xx: allow sysupgrade firmwares without UBI containing rootfs
In most cases it allows reverting back to the vendor firmware (as they
usually don't use UBI). If users wants to do that we can't do anything
anyway. Erease counters will be just lost. The only thing we do is warn:
"Flashing firmware without UBI for rootfs. All erase counters will be
lost."
It still requires forcing sysupgrade.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45392
2015-04-12 12:04:13 +00:00
Rafał Miłecki
24d40980b0 bcm53xx: add platform_pre_upgrade to prepare for kernel+UBI sysupgrade
We can now detect that provided firmware contains kernel and UBI image
partitions. Flashing it in a sane way (keeping erase counters) still
needs to be implemented.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45391
2015-04-12 11:46:16 +00:00
Rafał Miłecki
a04b71d330 bcm53xx: rework vendor fw handling to don't duplicate upgrade calls
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45389
2015-04-12 10:42:27 +00:00
Rafał Miłecki
2198db252c bcm53xx: switch to the otrx for verifying TRX images
This adds checking CRC32 of provided firmware image.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45320
2015-04-09 06:33:56 +00:00
Rafał Miłecki
b6e8da2e14 bcm53xx: image: share function checking TRX in provided firmware
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45292
2015-04-07 14:14:08 +00:00
Rafał Miłecki
7abd779730 bcm53xx: display all errors (not just the 1st one) when checking image
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45291
2015-04-07 14:14:02 +00:00
Rafał Miłecki
a19b69a717 bcm53xx: compare provided firmware magic with device magic
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45290
2015-04-07 14:13:56 +00:00
Rafał Miłecki
d1a28cfbb2 bcm53xx: support flashing CHK and CyberTAN images
SVN-Revision: 43800
2014-12-30 17:45:53 +00:00
Rafał Miłecki
e7d7f59171 bcm53xx: support WAN connected to switch port 0
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43754
2014-12-20 15:09:01 +00:00
Rafał Miłecki
dd9ca05249 bcm53xx: sysupgrade support for devices with serial flash
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43719
2014-12-15 15:43:46 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
Rafał Miłecki
3aaee1ba02 bcm53xx: failsafe support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43639
2014-12-11 20:31:07 +00:00
Hauke Mehrtens
c977fad4fd bcm53xx: add fixtrx
Without running fixtrx the image will not boot at the second time,
because the CRC the boot loader check is invalid at that time.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42639
2014-09-21 21:56:31 +00:00
Hauke Mehrtens
1c2dbe4e94 bcm53xx: add default config for switch
This scripts adds a default config for the switch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40565
2014-04-23 22:02:18 +00:00