KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
29443 commits 3 branches 0 tags 154 MiB
Commit graph

12860 commits

Author SHA1 Message Date
John Crispin
8a123f6f66 ramips: generate factory images for Nexx devices 
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 43541
 2014-12-07 16:53:22 +00:00
John Crispin
3572657c5a ar71xx: dev-eth: replace mdelay calls 
Similar to patch 2. Replace further mdelay calls.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43540
 2014-12-07 16:53:15 +00:00
John Crispin
59e7999a44 ag71xx: replace delay with sleep calls 
I don't see that we're in an atomic context so there's no need to
busy-wait. Therefore replace the delay with sleep calls.
See also Documentation/timers/timers-howto.txt. It states:
"In general, use of mdelay is discouraged and code should
be refactored to allow for the use of msleep."

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43539
 2014-12-07 16:53:09 +00:00
John Crispin
4caa8d50ad ag71xx: replace fixed PHY reset wait time in ar7240sw_setup 
Replace the fixed wait time of 1s with polling for BMCR_RESET
to be cleared on all PHYs.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43538
 2014-12-07 16:52:58 +00:00
Hauke Mehrtens
563f963b1b kernel: refresh patches for kernel 3.18 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43536
 2014-12-07 16:12:44 +00:00
Hauke Mehrtens
8e738da02c brcm47xx: remove kernel 3.10 
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43535
 2014-12-07 15:34:28 +00:00
Rafał Miłecki
dc6171c734 bcm53xx: 3.18: add early support for Buffalo WZR-900DHP 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43534
 2014-12-07 11:02:52 +00:00
Rafał Miłecki
a20fa1cb48 bcm53xx: add early support for Buffalo WZR-900DHP 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43533
 2014-12-07 10:55:44 +00:00
Rafał Miłecki
1020b84266 brcm47xx: add early support for WNDR3400 V3 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43532
 2014-12-07 00:58:40 +00:00
Rafał Miłecki
9bec9b86af bcm53xx: backport BCM5301X patches from arm-soc.git next/dt 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43530
 2014-12-05 16:46:55 +00:00
Rafał Miłecki
d1e0e39993 bcm53xx: squeeze (rename) BCM5301X patches 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43529
 2014-12-05 16:15:16 +00:00
Rafał Miłecki
8ea3c20b23 bcm53xx: rename patches that were not upstreamed to 3xx 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43528
 2014-12-05 16:13:27 +00:00
Rafał Miłecki
8033ccc975 kernel: update bcma up to 2014-10-27 
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43527
 2014-12-05 16:11:03 +00:00
John Crispin
c79ddb3773 octeon: sysupgrade: support config restore on ERL 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43524
 2014-12-05 08:58:25 +00:00
John Crispin
1731d5520e octeon: sysupgrade: rename old kernel after mounting /boot 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43523
 2014-12-05 08:58:18 +00:00
John Crispin
52f1d8ecdc octeon: sysupgrade: fix test for rootfs device 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43522
 2014-12-05 08:58:06 +00:00
John Crispin
dcc20e525b oxnas: switch back to kernel 3.14 
3.18 still got problems with stuck reboots if rootfs is ubifs...

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43521
 2014-12-05 00:20:50 +00:00
John Crispin
e553dfc356 oxnas: re-add support for kernel 3.14 
This reverts commit c81ddddde5fd193802d511b42eb7b108aac17136 on
https://gitorious.org/openwrt-oxnas/openwrt-oxnas.git
which removed patches and config for 3.14.

[arm_introduce-dma-fiq-irq-broadcast patch was renamed to match 3.18]

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43520
 2014-12-05 00:20:41 +00:00
John Crispin
dcc8a8ca9e octeon: add support for 3.18 kernel 
Runtime tested on Ubiquiti EdgeRouter Lite.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43519
 2014-12-05 00:20:10 +00:00
John Crispin
6f665ea7b8 octeon: sysupgrade: support config restore 
SVN-Revision: 43518
 2014-12-05 00:19:59 +00:00
John Crispin
28a9d9853b octeon: sysupgrade: get rootfsdev from kernel cmdline 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43517
 2014-12-05 00:19:46 +00:00
John Crispin
e6858f5f3f amazon: R.I.P. 
its been broken for 2 1/2 years

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43516
 2014-12-05 00:19:40 +00:00
John Crispin
d04c4a311e ralink: mt7621 is a 1004Kc 
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 43514
 2014-12-03 20:22:42 +00:00
Felix Fietkau
426467beba kernel: add missing null pointer check for mips dma ops inline patch on 3.18 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43511
 2014-12-03 18:17:17 +00:00
John Crispin
a21c9fd655 kernel: make the ubi attach patch check for a valid ubi magic rather than a tar magic 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43507
 2014-12-03 16:05:06 +00:00
John Crispin
a10a204aab kernel: make ubi auto-attach check for a tar file magic 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43506
 2014-12-03 14:32:38 +00:00
John Crispin
8a9979e57a gemini: update ethernet driver, register ethernet on nas4220 board 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43501
 2014-12-02 18:27:54 +00:00
John Crispin
a122c1c9c9 oxnas: switch CRC32 implementation to SLICEBY8 
similar to what was observed on kirkwood this significantly accelerates
btrfs write operations.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43498
 2014-12-02 15:25:28 +00:00
John Crispin
9430e86b61 oxnas/kd20: add usb-storage to default package set 
KD20 got a built-in card-reader wired to the USB-3 root-hub.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43497
 2014-12-02 15:25:14 +00:00
John Crispin
46814be2a8 oxnas/kd20: use gpio-beeper 
gpio-beeper module was added to the kernel recently.
Make use of it to drive the piezoelectric buzzer of the kd20.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43496
 2014-12-02 15:25:09 +00:00
John Crispin
ae51d64671 au1000: set 3.14 as default 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43494
 2014-12-02 15:23:37 +00:00
Felix Fietkau
f11b61ae18 realview: refresh kernel patch 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43491
 2014-12-02 13:14:59 +00:00
John Crispin
417e67b6b1 realview: fix up the phyoffset patch 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43488
 2014-12-01 21:45:18 +00:00
John Crispin
b5675ad92a kirkwood: enable mvsw6171 switch driver on EA4500 
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43487
 2014-12-01 21:30:40 +00:00
John Crispin
9b5f583906 kernel: add driver for Marvell 88E6171 switch 
This is a swconfig driver for the Marvell 88E6171 switch,
which is a 7-port GigE switch with two CPU ports and 64
802.1q VLANs.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 43486
 2014-12-01 21:30:35 +00:00
John Crispin
374f8a04e1 malta: set 3.14 as default 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43481
 2014-12-01 18:46:29 +00:00
Felix Fietkau
d1c0a65266 kernel: update 3.18 to rc7 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43479
 2014-12-01 17:38:54 +00:00
John Crispin
ad1592e02c oxnas: change visible board name 
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43475
 2014-12-01 16:15:37 +00:00
John Crispin
aa9141046f oxnas: ehci: rename vendor prefix plxtch to plxtech 
it was changed in DTS by commit
oxnas-target: fix typo in OX820 device-tree

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43474
 2014-12-01 16:15:30 +00:00
John Crispin
ecd27db757 ar8216: factor out reg_port_stats_base parameters to ar8xxx_chip 
Factor out reg_port_stats_base parameters to ar8xxx_chip.
Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43471
 2014-12-01 16:15:08 +00:00
John Crispin
ae15531bd2 ar8216: factor out mii_lo_first to ar8xxx_chip 
Factor out mii_lo_first to ar8xxx_chip.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43470
 2014-12-01 16:15:02 +00:00
John Crispin
ea9324f3d3 ar8216: factor out chip-specific data structures from ar8xxx_priv 
Factor out chip-specific data structures from ar8xxx_priv.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43469
 2014-12-01 16:14:54 +00:00
John Crispin
a3b651635f ar8216: factor out set_mirror_regs to ar8xxx_chip 
Factor out set_mirror_regs to ar8xxx_chip.
Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43468
 2014-12-01 16:14:43 +00:00
John Crispin
b82a08f5b6 ar8216: factor out mib_func to ar8xxx_chip 
Factor out mib_func to ar8xxx_chip. Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43467
 2014-12-01 16:14:39 +00:00
John Crispin
af003867b1 ar8216: factor out info whether switch should be configured at probe stage to ar8xxx_chip 
Factor out info whether switch should be configured at probe stage
to ar8xxx_chip. Remove related chip_is_... checks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43466
 2014-12-01 16:14:32 +00:00
John Crispin
84df2274ff realview: add 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43465
 2014-12-01 16:14:26 +00:00
John Crispin
c27ee280ce ixp4xx: add 3.14 support 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43464
 2014-12-01 16:14:21 +00:00
John Crispin
00f5d358ac au1000: add 3.14 support 
this is only compile tested

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43463
 2014-12-01 16:14:07 +00:00
John Crispin
610311436e ar71xx: Add build profile for the gl-inet 6416A and 6408A 
Patch to add the buildprofile for the GL-Init-6408A-v1 and the GL-Inet-6416A-v1
Both devices are identical, only difference is one comes with 8MB flash and
the other with 16MB flash

Official website: http://www.gl-inet.com/w/?page_id=241&lang=en
Comprehensive list of specs: https://revspace.nl/GL-Inet

Signed-off-by: Martijn Zilverschoon <martijn@friedzombie.com>

SVN-Revision: 43462
 2014-12-01 16:14:02 +00:00
Jonas Gorski
387fd3ca26 brcm63xx: add kernel 3.18 support 
Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43461
 2014-12-01 13:27:26 +00:00
Jonas Gorski
e8068f0b1b brcm63xx: register interrupt-controllers through DT when possible 
Add the required nodes for the interrupt controllers and register
them through DT when a DTB is present.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43457
 2014-12-01 00:52:07 +00:00
Jonas Gorski
443d730da8 brcm63xx: dtsi: add missing ranges properity to ubus nodes 
Allows nodes behind it to be mapped.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43456
 2014-12-01 00:51:56 +00:00
Jonas Gorski
d9a2c55806 brcm63xx: dtsi: add missing properties to cpu nodes 
Mark them as cpu nodes and add the addresses.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43455
 2014-12-01 00:51:53 +00:00
Jonas Gorski
ef4f69adc0 brcm63xx: convert to irq domain 
Add irq-domain aware irqchip drivers for the irq controllers of bcm63xx
and switch to use them.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43454
 2014-12-01 00:51:51 +00:00
Jonas Gorski
bb312899f6 brcm63xx: refresh patches 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43453
 2014-12-01 00:51:24 +00:00
Jonas Gorski
2b46097364 brcm63xx: add DT support for DSL-2650U 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43452
 2014-12-01 00:51:17 +00:00
Jonas Gorski
61637aea1b brcm63xx: add DT support for DSL-2740B/DSL-2741B rev F1 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43451
 2014-12-01 00:51:12 +00:00
Jonas Gorski
53214ca548 brcm63xx: Add DT support for F@ST2504n 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43450
 2014-12-01 00:51:08 +00:00
Jonas Gorski
40350a5daf brcm63xx: add DT support for F@ST2704V2 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43449
 2014-12-01 00:51:04 +00:00
Jonas Gorski
3872151ce0 brcm63xx: add DT support for F@ST2604 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43448
 2014-12-01 00:50:59 +00:00
Jonas Gorski
5f726ccd79 brcm63xx: add DT support for F@ST2404 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43447
 2014-12-01 00:50:56 +00:00
Luka Perkov
c691430897 kernel: add missing config symbol for 3.18 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43444
 2014-11-30 22:12:20 +00:00
Luka Perkov
201af1b219 malta: add more 3.14 kernel symbols 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43435
 2014-11-30 03:51:43 +00:00
Luka Perkov
7974f29558 kirkwood: change CRC32 implementation to CRC32_SLICEBY8 
At least on my Iomega ix2-200 system, this makes btrfs writes about 30% faster.

Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43434
 2014-11-30 01:20:38 +00:00
Luka Perkov
5c4f9198bb kirkwood: refresh kernel config 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43432
 2014-11-30 01:14:14 +00:00
Luka Perkov
dac3d29ec5 generic: set CONFIG_GENERIC_NET_UTILS 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43431
 2014-11-30 01:14:12 +00:00
Luka Perkov
070d3b27c2 kernel: update 3.14 to 3.14.25 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43427
 2014-11-29 10:30:58 +00:00
Luka Perkov
d11aefc8eb malta: add support for 3.14 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43426
 2014-11-29 10:30:55 +00:00
Luka Perkov
eef7c35952 malta: drop 3.12 config file 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43425
 2014-11-29 10:30:52 +00:00
Luka Perkov
0817bb762f x86: add support for 3.14 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43422
 2014-11-28 17:53:50 +00:00
Florian Fainelli
d73dc14957 kernel: 3.18: Fix patch 644 dependency chain 
This patch introduces some code that is compiled in whenever
CONFIG_BRIDGE_NETFILTER is built, with the code called from code compiled under
CONFIG_BRIDGE, CONFIG_BRIDGE_IGMP_SNOOPING or CONFIG_BRIDGE_NF_EBTABLES.

Unfortunately, these options aren't setting explicitly the dependency they now
have on CONFIG_BRIDGE_NETFILTER, for obvious reasons for CONFIG_BRIDGE.

However, this is not working really well when CONFIG_BRIDGE_NETFILTER is built
as a module, since code statically compiled will now use a function that is not
in the kernel image, which makes the linker grumpy.

Solve this by removing the option to build CONFIG_BRIDGE_NETFILTER as a module,
and protect our function definition by an IS_BUILTIN instead of a IS_ENABLED
macro. This fixes the issue for CONFIG_BRIDGE and CONFIG_BRIDGE_IGMP_SNOOPING.

Fixing CONFIG_BRIDGE_NF_EBTABLES has to be handled a bit differently, since it
directly references a variable that will not be declared if
CONFIG_BRIDGE_NETFILTER is not set. Protect the variable affectations by an
ifdef to make sure this doesn't happen.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43419
 2014-11-28 01:29:51 +00:00
Felix Fietkau
f473f95196 cns3xxx: fix PCIe->PCI bridge access (fixes #18422) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43414
 2014-11-27 20:54:18 +00:00
Felix Fietkau
ceccdc4a31 mpc85xx: update to linux 3.14 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43413
 2014-11-27 18:26:24 +00:00
Felix Fietkau
1846efcaaf mpc85xx: refresh linux 3.14 patches 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43412
 2014-11-27 18:26:17 +00:00
Felix Fietkau
d33db91a38 mpc85xx: remove the PHY reset change patch (no longer necessary) 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43411
 2014-11-27 18:26:12 +00:00
Felix Fietkau
14db2826ad ar8216: suppress PHY reset for linux 3.14 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43410
 2014-11-27 18:26:06 +00:00
Felix Fietkau
77e1a3675a kernel: backport patches for overriding PHY reset to 3.14 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43409
 2014-11-27 18:26:00 +00:00
Felix Fietkau
ca2d0c15cc cns3xxx: add experimental 3.18 support 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43406
 2014-11-27 16:24:32 +00:00
Felix Fietkau
a03b522bd6 kernel: add missing KEEP() statements for gc-sections patch in 3.18 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43405
 2014-11-27 16:24:25 +00:00
Felix Fietkau
1f5987c5d3 kernel: keep __bug_table with gc-sections 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43404
 2014-11-27 15:02:11 +00:00
Felix Fietkau
d57b64dfb0 cns3xxx: fix pcie root bridge topology 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43403
 2014-11-27 15:02:05 +00:00
Imre Kaloz
974f286261 add D-link DGL-5500 A1 support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43401
 2014-11-27 14:27:34 +00:00
Felix Fietkau
d0e4f71b9a cns3xxx: add missing dma mask for ethernet device 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43399
 2014-11-26 18:48:05 +00:00
Felix Fietkau
ebf6331c10 cns3xxx: switch to using the upstream dwc2 driver instead of dwc_otg 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43398
 2014-11-26 18:01:38 +00:00
Felix Fietkau
211669da3b cns3xxx: update to linux 3.14 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43397
 2014-11-26 18:01:29 +00:00
Felix Fietkau
0525ffa4c5 cns3xxx: remove bogus image added in r38703 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43396
 2014-11-26 18:01:18 +00:00
Felix Fietkau
8c136e6b56 cns3xxx: set base device for ethernet port netdevs 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43395
 2014-11-26 18:01:07 +00:00
Felix Fietkau
365cf9d10c cns3xxx: fix passing the device to dma mapping ops 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43394
 2014-11-26 18:00:52 +00:00
Imre Kaloz
7f6c05d97e fix the r6100's wan led name 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43393
 2014-11-26 11:38:59 +00:00
John Crispin
8dfb87bebc kirkwood: Add support for Iomega StorCenter ix2-200 
Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 43391
 2014-11-26 09:00:48 +00:00
John Crispin
72b58f2eb1 add new target 'oxnas' 
This is the oxnas target previously developed at
http://gitorious.org/openwrt-oxnas
Basically, this consolidates the changes and addtionas from
http://github.org/kref/linux-oxnas
into a new OpenWrt hardware target 'oxnas' adding support for
 PLX Technology NAS7820/NAS7821/NAS7825/...
formally known as
 Oxford Semiconductor OXE810SE/OXE815/OX820/...

For now there are 4 supported boards:
Cloud Engines Pogoplug V3 (without PCIe)
 fully supported

Cloud Engines Pogoplug Pro (with PCIe)
 fully supported

MitraStar STG-212
 aka ZyXEL NSA-212,
 aka Medion Akoya P89625 / P89636 / P89626 / P89630,
 aka Medion MD 86407 / MD 86805 / MD 86517 / MD 86587
 fully supported, see http://wiki.openwrt.org/toh/medion/md86587

Shuttle KD-20
 partially supported (S-ATA driver lacks support for 2nd port)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43388
 2014-11-26 09:00:08 +00:00
John Crispin
271a4d804a kernel: unset CONFIG_ARM_CCN 
oldconfig kept asking for that config symbol...

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43386
 2014-11-26 08:59:41 +00:00
John Crispin
47ab1cbf23 ar71xx: add support for TP-LINK CPE210/220/510/520 
This adds support for the TP-LINK CPE210/220/510/520 (Pharos series). These
devices are very similar to the Ubiquiti NanoStations, but with better specs:
faster CPU, more RAM, 2x2 MIMO.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 43385
 2014-11-26 08:59:32 +00:00
Imre Kaloz
15f6f67d18 Netgear R6100 support 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43382
 2014-11-26 08:28:22 +00:00
Jonas Gorski
1041e3be6e brcm63xx: uci-defaults: network: move DSL-274x1 F1 to right section 
The cpu port is at 8, not 5.

Fixes #18406.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43379
 2014-11-25 19:07:02 +00:00
Jonas Gorski
93e5c701cc brcm63xx: unify dt image generation 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43378
 2014-11-25 19:06:51 +00:00
Jonas Gorski
5e111b0330 brcm63xx: move rsa signature to additional options 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43377
 2014-11-25 19:06:43 +00:00
Jonas Gorski
e1eec53136 brcm63xx: fix image generation 
This fixes build issues introduced on r43361.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43376
 2014-11-25 19:06:38 +00:00
Imre Kaloz
60522c8ba7 rename overlayfs' symbol 
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43375
 2014-11-24 22:09:47 +00:00
John Crispin
506cf51b53 ralink: fix pci reset patch 
sorry, forgot to make target/update before commiting the last patch

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43374
 2014-11-24 20:39:48 +00:00