KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
16175 commits 3 branches 0 tags 154 MiB
Commit graph

126 commits

Author SHA1 Message Date
Gabor Juhos
64b16b9f34 ramips: Use NET_IP_ALIGN instead of hardcoding 2 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24124
 2010-11-24 10:01:18 +00:00
Gabor Juhos
624cfc5c91 ramips: DMA map the correct RX skb size 
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24123
 2010-11-24 10:01:16 +00:00
Gabor Juhos
f833e399f2 ramips: Don't trigger BUG_ON due to skb allocation failure 
Instead just drop the rx'ed frame silently and reuse the already
available buffer.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24122
 2010-11-24 10:01:12 +00:00
Gabor Juhos
c6e4124855 ramips: Remove unnecessary skb_put 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24121
 2010-11-24 10:01:08 +00:00
Gabor Juhos
69355ee10e ramips: Allow ethernet interface to be taken down and up again 
Taking the ramips ethernet interface down and up again resulted in the
driver not receiving any frames anymore. Fix this by correctly disabling
interrupts in the hw on ifdown.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 23243
 2010-10-05 14:10:34 +00:00
Gabor Juhos
e5b081335e ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205) 
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).

Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>

SVN-Revision: 23129
 2010-09-27 14:43:34 +00:00
Gabor Juhos
462dabc7f5 ramips: add support for Sparklan WCR-150GN board 
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 22658
 2010-08-15 09:43:07 +00:00
Gabor Juhos
2e45ce264d ramips: register ethernet device on the RT-N15 
SVN-Revision: 22213
 2010-07-15 19:45:46 +00:00
Gabor Juhos
c2ebadc504 ramips: add generic ethernet device for the RT288x 
SVN-Revision: 22212
 2010-07-15 19:45:43 +00:00
Gabor Juhos
0d8c036e56 ramips: add mdio_cfg configuration for the ethernet driver 
SVN-Revision: 22211
 2010-07-15 19:45:40 +00:00
Gabor Juhos
d14e9e706e ramips: Fix bridging in ramips ethernet driver 
Bridging between the ramips ethernet driver and rt2800pci was somewhat
broken. Frames received by the ethernet driver which were passed to the
wifi driver for transmission were sometimes corrupted or sent out with
huge delays.

The reason for this is the missing assignment of skb->tail in the ramips
ethernet driver's rx path resulting in skb->tail pointing to skb->data.
Since skb->tail is used by mac80211 it writes into skb->data which messes
up the frames content.

Fix this by using skb_put to correctly set skb->len and skb->tail.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 22172
 2010-07-13 16:52:07 +00:00
Gabor Juhos
27375c5139 ramips: protect GPIO register access with a spinlock 
SVN-Revision: 22171
 2010-07-13 16:52:04 +00:00
John Crispin
971b7ff50e Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set. 
Signed-off-by: Helmut Schaa

SVN-Revision: 21643
 2010-05-31 11:57:32 +00:00
Gabor Juhos
c24397b385 ramips: merge slab patch 
SVN-Revision: 21607
 2010-05-28 19:45:28 +00:00
Gabor Juhos
7ac21ada55 ramips: use COMMAND_LINE_SIZE directly 
SVN-Revision: 21606
 2010-05-28 19:45:24 +00:00
Gabor Juhos
60cbdbb686 ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons 
SVN-Revision: 21083
 2010-04-22 09:25:37 +00:00
Gabor Juhos
a423c3abee ramips: annotate device register function prototypes with __init 
SVN-Revision: 20627
 2010-03-31 08:40:28 +00:00
Gabor Juhos
a9f313edea ramips: register wifi device for the RT2880 based boards 
SVN-Revision: 20625
 2010-03-31 08:40:23 +00:00
Gabor Juhos
9f3d673dbc ramips: add wifi device for the RT2880 as well 
SVN-Revision: 20624
 2010-03-31 08:40:20 +00:00
Gabor Juhos
1c25cfcde0 ramips: register wifi device on the rt305x based boards 
SVN-Revision: 20616
 2010-03-30 21:24:10 +00:00
John Crispin
6f4052abe0 The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> 
SVN-Revision: 20599
 2010-03-30 12:04:05 +00:00
John Crispin
3ad14f304e Fix the base address of the wireless card. Otherwise it is not possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> 
SVN-Revision: 20596
 2010-03-30 10:06:05 +00:00
Gabor Juhos
4267623e2e ramips_eth: cleanup mac_address changing 
SVN-Revision: 19464
 2010-01-31 17:56:36 +00:00
Gabor Juhos
b16aaf5fac ramips_eth: update register offsets 
SVN-Revision: 19463
 2010-01-31 17:56:33 +00:00
Gabor Juhos
72b08b729a ramips_eth: pass sys_clk via platform_data 
SVN-Revision: 19462
 2010-01-31 17:56:30 +00:00
Gabor Juhos
9ab88ce62d ramips_eth: add helper functions to {ed,dis}able interrupts 
SVN-Revision: 19446
 2010-01-31 12:48:53 +00:00
Gabor Juhos
224edd2575 ramips_eth: remove unnecessary typecasts 
SVN-Revision: 19445
 2010-01-31 12:48:51 +00:00
Gabor Juhos
8aceaf96be ramips_eth: simplify tx_next computation 
SVN-Revision: 19444
 2010-01-31 12:48:48 +00:00
Gabor Juhos
21b06bd2c0 ramips_eth: simplify tx descriptor initialization 
SVN-Revision: 19443
 2010-01-31 12:48:46 +00:00
Gabor Juhos
d0fb66e3a4 ramips_eth: pass 'raeth_priv' struct directly to dma specific functions 
SVN-Revision: 19442
 2010-01-31 12:48:43 +00:00
Gabor Juhos
f0be6ab20c ramips_eth: convert to use netdev_ops 
SVN-Revision: 19440
 2010-01-31 12:48:38 +00:00
Gabor Juhos
d37975f6b2 ramips_eth: fix invalid register writes 
SVN-Revision: 19417
 2010-01-30 15:26:02 +00:00
Gabor Juhos
43e1dd85c2 ramips_eth: move memset call out from the loop 
SVN-Revision: 19416
 2010-01-30 15:25:59 +00:00
Gabor Juhos
ea4ce3b6fd ramips_eth: header file cleanup 
SVN-Revision: 19415
 2010-01-30 15:25:57 +00:00
Gabor Juhos
67cd819da6 ramips_eth: coding style cleanup 
SVN-Revision: 19414
 2010-01-30 15:25:55 +00:00
Gabor Juhos
a4e85bbceb ramips: register gpio buttons on the Fonera 2.0N board 
SVN-Revision: 19413
 2010-01-30 15:25:52 +00:00
Gabor Juhos
8823482a02 ramips: register gpio buttons on the WHR-G300N board 
SVN-Revision: 19412
 2010-01-30 15:25:49 +00:00
Gabor Juhos
35f47a3654 ramips: register gpio buttons on the V22RW-2x2 board 
SVN-Revision: 19411
 2010-01-30 15:25:47 +00:00
Gabor Juhos
30a397fd5e ramips: register gpio buttons on the DIR-300 revB board 
SVN-Revision: 19410
 2010-01-30 15:25:44 +00:00
Gabor Juhos
f9b053e87f ramips: fix wrong base addresses for the RT288x 
SVN-Revision: 19409
 2010-01-30 15:25:41 +00:00
Gabor Juhos
8448caa6ad ramips: include 'linux/leds.h' from 'dev-gpio-leds.h' 
SVN-Revision: 19408
 2010-01-30 15:25:36 +00:00
Gabor Juhos
94c9590e91 ramips: rename dev_gpio_leds.h to dev-gpio-leds.h 
SVN-Revision: 19407
 2010-01-30 15:25:33 +00:00
Gabor Juhos
55185915de ramips: cleanup WZR-AGL300NH board support file 
SVN-Revision: 19406
 2010-01-30 15:25:29 +00:00
Gabor Juhos
0530dd9849 ramips: register gpio-buttons on the RT-N15 board 
SVN-Revision: 19405
 2010-01-30 15:25:25 +00:00
Gabor Juhos
9327f02b7b ramips: add common gpio-buttons device 
SVN-Revision: 19404
 2010-01-30 15:25:20 +00:00
Gabor Juhos
4af1f533bb ramips: register rtl8366s device on the RT-N15 board 
SVN-Revision: 19403
 2010-01-30 15:25:16 +00:00
Gabor Juhos
e2dde81ead ramips: sanitize return value of ramips_gpio_get 
SVN-Revision: 19401
 2010-01-30 15:25:08 +00:00
Gabor Juhos
af9f40e60d ramips: update mips multi-machine stuff 
SVN-Revision: 19400
 2010-01-30 15:25:03 +00:00
Jo-Philipp Wich
6351d88e29 add initial support for the WZR-AGL300NH - patch by Joonas Lahtinen <joonas.lahtinen@gmail.com> 
SVN-Revision: 19321
 2010-01-24 23:31:49 +00:00
Gabor Juhos
b624dec41b ramips: register ethernet device on the WHR-G300N and V22RW-2x2 boards 
SVN-Revision: 18229
 2009-10-30 15:15:41 +00:00