KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
18968 commits 3 branches 0 tags 154 MiB
Commit graph

18968 commits

This branch
This branch
All branches
Author SHA1 Message Date
Gabor Juhos
0112153a0e ar71xx: fix occasional kernel hangs during boot on AR934x 
The patch taken from the linux-mips mailing list.

The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.

This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.

SVN-Revision: 29009
 2011-11-13 11:26:52 +00:00
Gabor Juhos
1afc76ea13 ar71xx: refresh kernel patches 
SVN-Revision: 29008
 2011-11-13 11:26:51 +00:00
Jonas Gorski
d8acb75009 linux: update 3.1 to 3.1.1 
SVN-Revision: 29007
 2011-11-13 10:48:05 +00:00
John Crispin
a8797d0de6 lantiq: add uci-defaults code for handling leds 
SVN-Revision: 29004
 2011-11-12 23:40:21 +00:00
John Crispin
832e02cd77 lantiq: add /lib/lantiq.sh and make hotplug handlers use it 
SVN-Revision: 29003
 2011-11-12 23:40:16 +00:00
John Crispin
5dcbbf0160 lantiq: rename leds 
SVN-Revision: 29002
 2011-11-12 23:40:12 +00:00
John Crispin
d84b7596d9 lantiq: split compat headers out of bsp header patch 
SVN-Revision: 29001
 2011-11-12 23:40:07 +00:00
John Crispin
2cff80f015 lantiq: adds hotplug handler for loading rt2x00 firmware 
SVN-Revision: 29000
 2011-11-12 23:40:01 +00:00
John Crispin
3660c51c40 lantiq: adds hotplug handler for handling buttons and makes w303v work with it 
SVN-Revision: 28999
 2011-11-12 23:39:56 +00:00
John Crispin
4248705108 lantiq: cleanup default package selection 
SVN-Revision: 28998
 2011-11-12 23:39:51 +00:00
John Crispin
eb20ab87e6 lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it 
SVN-Revision: 28994
 2011-11-12 18:41:15 +00:00
Gabor Juhos
bbfaaeffd6 kernel: ar8216: add support for the AR8236 switch 
SVN-Revision: 28993
 2011-11-12 14:09:52 +00:00
Gabor Juhos
ecb3690d0a kernel: ar8216: move port vlan setup into a separate function 
SVN-Revision: 28992
 2011-11-12 14:09:50 +00:00
Nicolas Thill
b49aed1520 package/base-files: enhance service functions 
* allow matching process by name (useful for processes changing it)
 * check if first argument is executable
 * fix function name used in error messages

SVN-Revision: 28991
 2011-11-12 13:53:15 +00:00
Gabor Juhos
5ad763075e ar71xx: use the button for WPS control on the DB120 
SVN-Revision: 28990
 2011-11-12 12:50:20 +00:00
Gabor Juhos
4555be2bec ar71xx: register the second ethernet interface on the DB120 board 
SVN-Revision: 28989
 2011-11-12 12:50:19 +00:00
Gabor Juhos
368c6605a0 ar71xx: implement SoC specific phy interface setup 
SVN-Revision: 28988
 2011-11-12 12:50:18 +00:00
Gabor Juhos
21d317b9cc ar71xx: move phy interface setup into a separate function 
SVN-Revision: 28987
 2011-11-12 12:50:16 +00:00
Gabor Juhos
aff0c84ffa ar71xx: register both MDIO bus on the DB120 board 
SVN-Revision: 28986
 2011-11-12 12:09:59 +00:00
Gabor Juhos
b144249108 ar71xx: add AR934X specific MDIO registration code 
SVN-Revision: 28985
 2011-11-12 12:09:56 +00:00
Gabor Juhos
f835106c8c ar71xx: add a secondary mdio bus 
SVN-Revision: 28984
 2011-11-12 12:09:54 +00:00
Gabor Juhos
90a42da270 ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* 
SVN-Revision: 28983
 2011-11-12 12:09:50 +00:00
Gabor Juhos
9daa2149fd ar71xx: add an id argument to ar71xx_add_device_mdio 
SVN-Revision: 28982
 2011-11-12 12:09:48 +00:00
Gabor Juhos
b07b687aec ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa 
SVN-Revision: 28981
 2011-11-12 12:09:42 +00:00
Gabor Juhos
a9216bb76e ar71xx: add AR934x specific USB setup 
SVN-Revision: 28980
 2011-11-12 10:54:20 +00:00
Gabor Juhos
346e44105a ar71xx: register the first ethernet interface on the DB120 board 
SVN-Revision: 28979
 2011-11-12 10:54:18 +00:00
Gabor Juhos
b1ba5e2f3d ar71xx: allow to register ethernet interfaces for AR934X 
SVN-Revision: 28978
 2011-11-12 10:54:17 +00:00
Gabor Juhos
2f9e535e89 ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered 
SVN-Revision: 28977
 2011-11-12 10:54:16 +00:00
Gabor Juhos
e962b07c8b ar71xx: add AR934X specific bootstrap and reset register bits 
SVN-Revision: 28976
 2011-11-12 10:54:15 +00:00
Gabor Juhos
d461fdd519 ar71xx: add diag support for the DB120 board 
SVN-Revision: 28975
 2011-11-12 10:54:10 +00:00
Gabor Juhos
d8db8e94c8 ar71xx: fix GPIO direction setup for AR934x 
SVN-Revision: 28974
 2011-11-12 10:54:09 +00:00
Gabor Juhos
43e993e5f5 ar71xx: fix AR934X clock frequency calculation 
SVN-Revision: 28973
 2011-11-12 10:54:08 +00:00
Gabor Juhos
0939419e24 package: add om2p-watchdog script 
Based on a patch by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 28972
 2011-11-12 10:54:06 +00:00
Gabor Juhos
8687fc3e41 ar71xx: generate ubootenv from uci-defaults instead of providing defconfig 
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28971
 2011-11-12 10:54:04 +00:00
John Crispin
0e35877fea pjsip: bump to 1.10 and improve ltq_tapi backend 
SVN-Revision: 28963
 2011-11-11 22:23:26 +00:00
John Crispin
fda4ee22a0 lantiq: improve falcon package selection 
SVN-Revision: 28962
 2011-11-11 21:59:11 +00:00
John Crispin
e1dc73be90 lantiq: fix breakage introduced in 3.1 bump 
SVN-Revision: 28961
 2011-11-11 21:59:01 +00:00
Jo-Philipp Wich
20ff304ed9 base-files: now that the initial password is completely empty (and not primed with "!") adjust login.sh for it to make telnetd available again 
SVN-Revision: 28943
 2011-11-11 13:25:31 +00:00
Nicolas Thill
348347ce41 package/base-files-network: fix udhcpc issues introduced in r28866 (closes: #10383) 
SVN-Revision: 28942
 2011-11-11 13:23:29 +00:00
Jo-Philipp Wich
1cdd762f90 mac80211: add antenna control api for b43 
SVN-Revision: 28940
 2011-11-10 23:07:42 +00:00
Florian Fainelli
4ad1f2d710 acx-mac80211: update to 20111030 
Fixes build failures with Linux 3.1+

SVN-Revision: 28939
 2011-11-10 15:31:37 +00:00
Imre Kaloz
28039aea90 nuke another 2.4 skeleton 
SVN-Revision: 28937
 2011-11-10 13:39:06 +00:00
Imre Kaloz
7944b6fa32 enable and use shadow passwords by default 
SVN-Revision: 28936
 2011-11-10 12:55:01 +00:00
Imre Kaloz
55ac529951 the empty root password should be empty ;) 
SVN-Revision: 28935
 2011-11-10 12:47:50 +00:00
Jo-Philipp Wich
be49daffc8 base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli 
SVN-Revision: 28933
 2011-11-10 12:16:41 +00:00
Jonas Gorski
f8f30bff82 package: kernel: fix typo 
SVN-Revision: 28898
 2011-11-09 22:11:51 +00:00
Jonas Gorski
0a2728664f package: kernel: add handling for 3.2 renames (and some missed ones for 3.1) 
SVN-Revision: 28897
 2011-11-09 21:16:52 +00:00
Jonas Gorski
5079522183 package: mac80211: mark as broken for 3.2 
SVN-Revision: 28896
 2011-11-09 21:16:48 +00:00
Jonas Gorski
e22a9087a8 package: acx: mark as broken for 3.2 
SVN-Revision: 28895
 2011-11-09 21:16:45 +00:00
Jonas Gorski
0a2eb804cc package: madwifi: mark as broken for 3.2 
SVN-Revision: 28894
 2011-11-09 21:16:42 +00:00