Commit graph

7679 commits

Author SHA1 Message Date
Gabor Juhos
8c95385d78 ramips: raeth: use 're' instead of 'priv' everywhere
SVN-Revision: 30552
2012-02-15 18:33:38 +00:00
Gabor Juhos
b3b79365f3 ramips: raeth: force link down in ramips_phy_stop
SVN-Revision: 30550
2012-02-15 13:47:52 +00:00
Gabor Juhos
3e7b461431 ramips: raeth: serialize ramips_link_adjust calls
SVN-Revision: 30549
2012-02-15 13:47:50 +00:00
Gabor Juhos
dcb13d4098 ramips: raeth: add PHYLIB support
SVN-Revision: 30547
2012-02-15 06:47:12 +00:00
John Crispin
23b2bd9494 linux-atm: update solos-pci driver to upstream
Fixes for the solos-pci driver.

- Corrects calculation of headroom for padding.
- Removes pointless debug messages.
- Expose Bis A and Bis M annex capabilities.
- Expose hardware revision.

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 30541
2012-02-14 20:11:24 +00:00
John Crispin
9e5b8ad833 linux-atm: headroom/padding fixes
Submitted upstream to netdev by Chas Williams on linux-atm.

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 30540
2012-02-14 20:11:22 +00:00
John Crispin
1a71f07d00 generate uboot environment data in target
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.

uboot environment config is used by fw_printenv fw_setenv tools.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 30537
2012-02-14 19:07:11 +00:00
John Crispin
7416a5f0aa fix compile error in previous commit
SVN-Revision: 30534
2012-02-14 19:07:05 +00:00
John Crispin
cd1a204365 Support booting the Speedport W502V using BRN-BOOT.
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 30532
2012-02-14 17:48:04 +00:00
Gabor Juhos
02a01a16c7 ramips: extract eeprom for the PCIe wlan module on the RT-N56U
SVN-Revision: 30529
2012-02-14 17:32:45 +00:00
Gabor Juhos
43d1a2c3ab ramips: rt3883: enable PCI on the RT-N56U board
SVN-Revision: 30528
2012-02-14 17:32:44 +00:00
Gabor Juhos
784be92e39 ramips: rt3883: add PCI support
SVN-Revision: 30527
2012-02-14 17:32:42 +00:00
Gabor Juhos
10f00dc48b ramips: rt3883: sync 2.6.39 config
SVN-Revision: 30526
2012-02-14 17:32:41 +00:00
Gabor Juhos
ed79921fe5 ramips: use SoC specific irq.h
SVN-Revision: 30525
2012-02-14 17:32:40 +00:00
John Crispin
0b07769898 fixes irq locking in ethernet driver
SVN-Revision: 30522
2012-02-14 15:05:58 +00:00
John Crispin
55bf39e98c fixes gpio_export patch
SVN-Revision: 30521
2012-02-14 15:05:57 +00:00
John Crispin
976d3eb854 add annex selection support to ltq_dsl package
SVN-Revision: 30518
2012-02-14 15:05:49 +00:00
Gabor Juhos
9a0e17857e ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards
SVN-Revision: 30508
2012-02-13 17:11:58 +00:00
Gabor Juhos
1c57a22aae ar71xx: add model detection for TL-WR842N/ND
SVN-Revision: 30507
2012-02-13 17:11:57 +00:00
Florian Fainelli
e16916480d update to 3.2
SVN-Revision: 30503
2012-02-13 16:05:30 +00:00
Florian Fainelli
7bed2e2225 fix titan gpio register size
SVN-Revision: 30502
2012-02-13 16:05:27 +00:00
Gabor Juhos
8d5dfa75e6 ramips: rt3883: update package list in the default profile
SVN-Revision: 30499
2012-02-13 15:18:05 +00:00
Gabor Juhos
99c019fb0d ramips: add preliminary support for the Asus RT-N56U board
SVN-Revision: 30498
2012-02-13 15:18:04 +00:00
Gabor Juhos
97e641a0e6 ramips: raeth: enable MDIO code for RT3883
SVN-Revision: 30497
2012-02-13 15:18:03 +00:00
Gabor Juhos
e532fa5fd4 ramips: add preliminary support for the RT3662/RT3883 SoCs
SVN-Revision: 30495
2012-02-13 15:17:59 +00:00
Florian Fainelli
4a0dc3a32a add support for 3.2
SVN-Revision: 30492
2012-02-13 12:36:34 +00:00
Hauke Mehrtens
30408f1cc4 brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed.
SVN-Revision: 30488
2012-02-12 22:41:20 +00:00
Hauke Mehrtens
e7bd7f7e85 brcm47xx: activate config bug to show warnings
SVN-Revision: 30487
2012-02-12 22:40:01 +00:00
Gabor Juhos
22ec8b4839 ramips: use GENERIC_{4,8}M image template for WR5123GN
SVN-Revision: 30483
2012-02-12 18:04:47 +00:00
Gabor Juhos
b7f129e19b ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline
SVN-Revision: 30482
2012-02-12 18:04:46 +00:00
Hauke Mehrtens
fa21aef5ab brcm47xx: refresh patches
SVN-Revision: 30481
2012-02-12 16:45:27 +00:00
Hauke Mehrtens
838c363886 brcm47xx: update usb driver for brcm47xx.
SVN-Revision: 30480
2012-02-12 16:38:10 +00:00
Gabor Juhos
a287c60a61 ramips: add initial support for 3.2
SVN-Revision: 30476
2012-02-12 12:52:14 +00:00
Gabor Juhos
388013b0ce ramips: include 'linux/module.h' in the ramips_spi driver
SVN-Revision: 30475
2012-02-12 12:52:13 +00:00
Gabor Juhos
faae4235c4 ramips: rt288x: remove per-board physmap_flash_data instances
SVN-Revision: 30474
2012-02-12 12:52:12 +00:00
Gabor Juhos
3502e2b93f ramips: rt305x: remove per-board physmap_flash_data instances
SVN-Revision: 30473
2012-02-12 12:52:10 +00:00
Imre Kaloz
143e861708 enable another l2 cache errate on newer kernels
SVN-Revision: 30472
2012-02-12 11:22:08 +00:00
Gabor Juhos
3a11dcdaa8 ramips: load gpio-polled keys module
SVN-Revision: 30463
2012-02-11 20:37:34 +00:00
Gabor Juhos
323ece9474 ramips: remove yet another CONFIG_MTD_PARTITION ifdef
SVN-Revision: 30462
2012-02-11 19:37:11 +00:00
Gabor Juhos
32b9e8c750 ramips: use gpio-keys-polled instead of gpio-buttons
SVN-Revision: 30461
2012-02-11 19:37:06 +00:00
Imre Kaloz
8ce80f7454 add some missing symbols
SVN-Revision: 30460
2012-02-11 18:38:28 +00:00
Gabor Juhos
80b40497de ramips: add MIPS platform file
SVN-Revision: 30459
2012-02-11 18:16:11 +00:00
Gabor Juhos
80a535ba58 generic/2.6.39: refresh patches
SVN-Revision: 30458
2012-02-11 18:16:08 +00:00
Imre Kaloz
440a7fbc3b refresh patches to -rc3
SVN-Revision: 30456
2012-02-11 17:43:06 +00:00
Gabor Juhos
4e1b870f3e ramips: add MDIO bus support for RT288X
SVN-Revision: 30455
2012-02-11 16:49:56 +00:00
Imre Kaloz
0ace4636db rename 3.1 patches directory as it will be used for newer kernels as well
SVN-Revision: 30454
2012-02-11 15:59:23 +00:00
Imre Kaloz
1fb5ff4e04 rename 2.6.39 patches directory
SVN-Revision: 30453
2012-02-11 15:58:14 +00:00
Gabor Juhos
34a9ccf544 ramips: fix Belkin F5D8235-v2 VLAN setup
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 30452
2012-02-11 15:31:18 +00:00
Gabor Juhos
8916c02b47 ramips: raeth: make debugging messages configurable
SVN-Revision: 30450
2012-02-11 15:12:10 +00:00
Gabor Juhos
aac3ad4c0e ramips: raeth: use device pointer in DMA API calls
SVN-Revision: 30449
2012-02-11 15:12:08 +00:00