Commit graph

225 commits

Author SHA1 Message Date
Álvaro Fernández Rojas
41eab9048b kernel: update kernel 4.4 to version 4.4.21
Refresh patches for all targets that support kernel 4.4.
Compile-tested on brcm2708 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-16 10:17:27 +02:00
Felix Fietkau
d27bce8d28 build: drop UBI EOF marker from images by default
Only add them where they are actually required.
Should help with compatibility issues with stock U-Boot images that
access UBI

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-12 18:21:52 +02:00
Koen Vandeputte
d70b748942 imx6: Add static PCA953x support in kernel
commit a2386c384d requires the
module to be static in the kernel.

So lets actually add support for it inside the kernel config.
Tested on Ventana

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2016-09-10 12:17:39 +02:00
Mathias Kresin
e7ec7a08aa image: use k as unit suffix for blocksize
Use k as unit suffix for kilobyte to have a the same unit regardless of
the used filesystem.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 08:56:05 +02:00
Tim Harvey
7419b9497f imx6: override default inittab to add video console tty
Adds the following to the default inittab
tty1::askfirst:/bin/ash --login

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-08 15:28:39 +02:00
Tim Harvey
a2386c384d imx6: image: remove pca955x/ds1672/at24 from Ventana kernel modules
These need to be static in the kernel for Ventana

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-08 15:28:39 +02:00
Koen Vandeputte
911b6ca234 imx6: enable ARM crypto acceleration 2016-09-04 13:36:10 +02:00
Koen Vandeputte
0cf48c4407 imx6: refresh kernel config
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2016-09-04 13:36:10 +02:00
Tim Harvey
3314bcf715 imx6: add GW553x support
The Gateworks Ventana GW553x is a single-board computer based on the NXP
IMX6 SoC with the following features:
 * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q)
 * small form factor (35x70mm)
 * 512MB DDR3 DRAM (2x32bit) (options up to 2GB)
 * 256MB NAND flash (4GB option)
 * Gateworks System Controller:
  - hardware watchdog
  - hardware monitor
  - pushbutton controller
  - EEPROM storage
  - power control
 * JTAG programmable
 * 1x miniPCI socket (with PCIe, USB, SIM)
 * 1x microSD socket
 * 1x SIM socket
 * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag)
 * analog CVBS video in
 * GPS (optional uBlox EVA-M8M)
 * Application headers:
  - 2x TTL UART (TX/RX)
  - 4x TTL GPIO (3x configurable as PWM)
  - 3x CVBS Analog video input (1x decoder with 3x selectable inputs)
 * Front panel connectors:
  * micro-HDMI audio/video out
  - 1x user programmable LED
  - 1x configurable user pushbutton
  - 1x USB OTG

See http://www.gateworks.com for more info

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-04 13:36:10 +02:00
Felix Fietkau
d3730c9aca imx6: disable EOF markers on UBI
The boot loader does not recognize them and might mess up the volume

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-31 13:57:05 +02:00
Koen Vandeputte
dc765f64c5 imx6: Fix pointing to msata/mmc bootdevs
Point to correct devices when booting from msata or MMC
Changes fetched from Gateworks git

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[Jo-Philipp Wich: rebased to apply against current LEDE version]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-22 17:24:48 +02:00
Jo-Philipp Wich
35be928466 imx6: fix generating bootfs in imagebuilder (FS#102)
The image builder does not bundle sub-directories within $(KERNEL_BUILD_DIR),
therfore the intermediate "ventana-uImage.boot" directory is not shipped,
leading to failures with "make image" later on.

To circumvent the issue, store the intermediate boot files as tar archive
instead of putting them into a directory to ensure that they end up in the
final image builder tarball. Fixes FS#102

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-20 20:23:32 +02:00
Felix Fietkau
5d9a4c210d imx6: clean up / fix ventana image build code
Fix ubifs mkfs options
Use standard Build/* commands instead of doing everything in the hackish
ubi-boot-overlay template
Fix bootfs.tar.gz build error

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 19:35:05 +02:00
Felix Fietkau
468a9b7a77 imx6: use ubinize-image.sh to fix build with per-device rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 19:35:05 +02:00
Felix Fietkau
8e2764ce9b image.mk: clean up redundant code related to DEVICE_DTS
It is used by a core build template, so the variable should be
initialized and added to DEVICE_VARS in the core.
Same for DEVICE_DTS_DIR

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-15 14:14:11 +02:00
Hauke Mehrtens
efa1960abb kernel: update kernel 4.4 to version 4.4.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-13 15:39:15 +02:00
Felix Fietkau
de165b66be imx6: fix redundant PROFILES overrides in image makefile
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:19 +02:00
Felix Fietkau
7e7a31e682 imx6: fix build breakage introduced in 9e41c3f54e
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:19 +02:00
Felix Fietkau
61d82e7b02 imx6: fix image makefile indentation for Device/ sections
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:19 +02:00
John Crispin
9e41c3f54e imx6: move profile definitions to the image/Makefile
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:03:23 +02:00
John Crispin
fa69553900 branding: add LEDE branding
Signed-off-by: John Crispin <blogic@openwrt.org>
2016-03-24 22:40:13 +01:00
Luka Perkov
d1005862c2 imx6: images: add bootfs.tar.gz build artifact
In order to create a bootable block storage device, both bootfs and rootfs
tarballs are required. However, our current scheme does not export a bootfs
tarball so add the packaging of it here.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 49196
2016-04-19 13:46:33 +00:00
John Crispin
f07a57c0e8 imx6: image: Add missing kernel prefix
Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 48909
2016-03-04 08:33:20 +00:00
Felix Fietkau
57776e68ce base-files: remove default /etc/config/network, generate it via board.d instead
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48493
2016-01-25 16:30:41 +00:00
Luka Perkov
cdfeab0931 imx6: drop 4.1 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48300
2016-01-18 06:43:50 +00:00
Luka Perkov
c4de2dfd2d imx6: drop 4.3 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48299
2016-01-18 06:43:48 +00:00
Luka Perkov
85bdde7cf2 imx6: move to 4.4 kernel
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48298
2016-01-18 06:40:16 +00:00
Felix Fietkau
e0de7275f9 imx6: kernel: Add Micrel PHY used on Apalis SOM
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Cc: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48249
2016-01-15 15:18:23 +00:00
Felix Fietkau
321823ba05 imx6: add 4.4 support
Build and boot tested on the following hardware:
 * GW54xx
 * GW53xx
 * GW52xx
 * GW51xx
 * GW552x
 * GW551x

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48248
2016-01-15 15:18:18 +00:00
Hauke Mehrtens
cdb83aaf5f kernel/4.3: update to version 4.3.3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de

SVN-Revision: 48224
2016-01-12 20:52:19 +00:00
Luka Perkov
903e09e233 imx6: images: ventana: change name of ubi output
Change the name of the .ubi produced to strip out the word 'factory'. This is
mainly due to the fact that there is no difference between the Ventana 'factory'
image vs the standard image.

Name changes from:
openwrt-imx6-ventana-squashfs.nand-factory_<size>.ubi to
openwrt-imx6-ventana-squashfs-nand_<size>.ubi

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48016
2015-12-29 23:40:41 +00:00
Luka Perkov
3d11f8ae36 imx6: fix device-tree mac address assignment for ventana sky2/eth1
Some Ventana boards have a Marvell sky2 GigE controller as eth1 however
assigning the mac address through device-tree is difficult because the
PCI slot can move around depending on board configuration and slot population.

To work around this we add a patch to the sky2 driver to allow accessing its
mac address via a device-tree alias.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48013
2015-12-28 04:56:27 +00:00
Luka Perkov
2578f0183c imx6: add i2c retries for Ventana /dev/i2c-0
On Ventana boards the Gateworks System Controller is the only device on I2C1
(/dev/i2c-0) and it can NAK transfers if it is busy in an ADC loop. Because
this is a multi-function device with several slave addresses it is best to
add retries at the controller level instead of within each slave driver. This
adds a patch that adds 3 retries for i2c transactions only for Ventana boards
and only for I2C1

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48012
2015-12-28 04:56:13 +00:00
Luka Perkov
158b5b4231 imx6: imx: thermal: use CPU temperature grade info for thresholds
This is a backport of a2291badc355d58ead5c19ae0609468947416040 from thermal-soc
accepted upstream.

The IMX6Q/IMX6DL SoC's have a 2-bit temperature grade stored in OTP. Instead
of assuming 85C for passive cooling threshold and 100C for critical base
these thresholds off the thermal gade max CPU temperature:
 - passive threshold: max - 10C
 - critical threshold: max - 5C

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 48011
2015-12-28 04:56:07 +00:00
Luka Perkov
f0070d495e imx6: Add pwm nodes
Upstream status: Accepted

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48010
2015-12-28 04:55:54 +00:00
Luka Perkov
f6dfeee3fe imx6: ventana: add ecspi3 host controller for GW52xx
Certain board revisions of the GW52xx support an SPI host controller with
a single chip-select going to an off board connector.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48009
2015-12-28 04:55:48 +00:00
Luka Perkov
dee4e713e9 imx6: Add 4.3 support
Build and boot tested on the following hardware:
 * GW54xx
 * GW53xx
 * GW52xx
 * GW51xx
 * GW552x
 * GW551x

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48008
2015-12-28 04:55:45 +00:00
Luka Perkov
fb8c5702e0 imx6: drop lingering files
Since 3.18 kernel support was dropped, remove lingering files.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48007
2015-12-28 04:55:33 +00:00
Jo-Philipp Wich
67e1c87012 all: drop old uci-defaults.sh
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
Jo-Philipp Wich
08848936dd all: remove redundant board.d/00_model files
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47753
2015-12-04 11:07:06 +00:00
Jo-Philipp Wich
7cf1ff8a75 imx6: switch from uci-defaults to board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47738
2015-12-03 23:07:20 +00:00
Luka Perkov
8d8ef5288c imx6: ventana: remove invalid video options from bootscript
Removed video related kernel params that are only appropriate for the
Freescale downstream vendor kernel and not appriate for mainline linux.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47532
2015-11-20 05:21:19 +00:00
Luka Perkov
d8d318f344 imx6: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 47513
2015-11-19 08:00:17 +00:00
Luka Perkov
71a92988e3 imx6: remove obsolete VENTANA_DTS from profile
The device-tree files are now specified in the image Makefile

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47512
2015-11-18 22:53:43 +00:00
Luka Perkov
baa8b933ec imx6: add Vetnana LVDS support
These patches have been submitted to upstream Linux and are pending acceptance.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47511
2015-11-18 22:06:54 +00:00
Luka Perkov
7b931ba95c imx6: ventana: fix GW16083 device-tree patch
The 206-ARM-imx-ventana-added-GW16083-to-device-tree.patch merged wrong in
the conversion from 3.18 to 4.1. This patch resolves that and puts the
device-tree nodes in the correct place.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47510
2015-11-18 22:06:50 +00:00
Luka Perkov
5f3d29f4e6 imx6: drop support for kernel 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 47509
2015-11-18 21:36:36 +00:00
Luka Perkov
03401fed5e imx6: convert ventana images to squashfs+ubifs overlay
Replace the ventana ubi images from a single rootfs volume containing the
rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi
containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs'
squasfs volume, and rootfs_data an empty ubifs volume.

At the same time move ventana image creation over to using the new
TARGET_DEVICE syntax as a cleanup.

Additionally removed FIT image creation as it is recommended that this be
done manually to produce signed FIT images if needed.

Note that a bootscript is needed for Ventana to change its default mtdparts
to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there
are patches in OpenWrt kernels that try to auto-attach and auto-mount and these
get in the way if the mtd partition is named 'rootfs'.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
Luka Perkov
ca26bf8932 imx6: kernel: add UBI_BLOCK support
UBI_BLOCK support is needed for mounting squashfs over UBI

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47507
2015-11-18 21:35:16 +00:00
Luka Perkov
486dc85e72 imx6: switch to v4.1
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 47506
2015-11-18 21:35:12 +00:00