Commit graph

209 commits

Author SHA1 Message Date
Felix Fietkau
de165b66be imx6: fix redundant PROFILES overrides in image makefile
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:19 +02:00
Felix Fietkau
7e7a31e682 imx6: fix build breakage introduced in 9e41c3f54e
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:19 +02:00
Felix Fietkau
61d82e7b02 imx6: fix image makefile indentation for Device/ sections
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:19 +02:00
John Crispin
9e41c3f54e imx6: move profile definitions to the image/Makefile
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:03:23 +02:00
John Crispin
fa69553900 branding: add LEDE branding
Signed-off-by: John Crispin <blogic@openwrt.org>
2016-03-24 22:40:13 +01:00
Luka Perkov
d1005862c2 imx6: images: add bootfs.tar.gz build artifact
In order to create a bootable block storage device, both bootfs and rootfs
tarballs are required. However, our current scheme does not export a bootfs
tarball so add the packaging of it here.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 49196
2016-04-19 13:46:33 +00:00
John Crispin
f07a57c0e8 imx6: image: Add missing kernel prefix
Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 48909
2016-03-04 08:33:20 +00:00
Felix Fietkau
57776e68ce base-files: remove default /etc/config/network, generate it via board.d instead
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48493
2016-01-25 16:30:41 +00:00
Luka Perkov
cdfeab0931 imx6: drop 4.1 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48300
2016-01-18 06:43:50 +00:00
Luka Perkov
c4de2dfd2d imx6: drop 4.3 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48299
2016-01-18 06:43:48 +00:00
Luka Perkov
85bdde7cf2 imx6: move to 4.4 kernel
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48298
2016-01-18 06:40:16 +00:00
Felix Fietkau
e0de7275f9 imx6: kernel: Add Micrel PHY used on Apalis SOM
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Cc: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48249
2016-01-15 15:18:23 +00:00
Felix Fietkau
321823ba05 imx6: add 4.4 support
Build and boot tested on the following hardware:
 * GW54xx
 * GW53xx
 * GW52xx
 * GW51xx
 * GW552x
 * GW551x

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48248
2016-01-15 15:18:18 +00:00
Hauke Mehrtens
cdb83aaf5f kernel/4.3: update to version 4.3.3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de

SVN-Revision: 48224
2016-01-12 20:52:19 +00:00
Luka Perkov
903e09e233 imx6: images: ventana: change name of ubi output
Change the name of the .ubi produced to strip out the word 'factory'. This is
mainly due to the fact that there is no difference between the Ventana 'factory'
image vs the standard image.

Name changes from:
openwrt-imx6-ventana-squashfs.nand-factory_<size>.ubi to
openwrt-imx6-ventana-squashfs-nand_<size>.ubi

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48016
2015-12-29 23:40:41 +00:00
Luka Perkov
3d11f8ae36 imx6: fix device-tree mac address assignment for ventana sky2/eth1
Some Ventana boards have a Marvell sky2 GigE controller as eth1 however
assigning the mac address through device-tree is difficult because the
PCI slot can move around depending on board configuration and slot population.

To work around this we add a patch to the sky2 driver to allow accessing its
mac address via a device-tree alias.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48013
2015-12-28 04:56:27 +00:00
Luka Perkov
2578f0183c imx6: add i2c retries for Ventana /dev/i2c-0
On Ventana boards the Gateworks System Controller is the only device on I2C1
(/dev/i2c-0) and it can NAK transfers if it is busy in an ADC loop. Because
this is a multi-function device with several slave addresses it is best to
add retries at the controller level instead of within each slave driver. This
adds a patch that adds 3 retries for i2c transactions only for Ventana boards
and only for I2C1

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48012
2015-12-28 04:56:13 +00:00
Luka Perkov
158b5b4231 imx6: imx: thermal: use CPU temperature grade info for thresholds
This is a backport of a2291badc355d58ead5c19ae0609468947416040 from thermal-soc
accepted upstream.

The IMX6Q/IMX6DL SoC's have a 2-bit temperature grade stored in OTP. Instead
of assuming 85C for passive cooling threshold and 100C for critical base
these thresholds off the thermal gade max CPU temperature:
 - passive threshold: max - 10C
 - critical threshold: max - 5C

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 48011
2015-12-28 04:56:07 +00:00
Luka Perkov
f0070d495e imx6: Add pwm nodes
Upstream status: Accepted

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48010
2015-12-28 04:55:54 +00:00
Luka Perkov
f6dfeee3fe imx6: ventana: add ecspi3 host controller for GW52xx
Certain board revisions of the GW52xx support an SPI host controller with
a single chip-select going to an off board connector.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48009
2015-12-28 04:55:48 +00:00
Luka Perkov
dee4e713e9 imx6: Add 4.3 support
Build and boot tested on the following hardware:
 * GW54xx
 * GW53xx
 * GW52xx
 * GW51xx
 * GW552x
 * GW551x

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48008
2015-12-28 04:55:45 +00:00
Luka Perkov
fb8c5702e0 imx6: drop lingering files
Since 3.18 kernel support was dropped, remove lingering files.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48007
2015-12-28 04:55:33 +00:00
Jo-Philipp Wich
67e1c87012 all: drop old uci-defaults.sh
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
Jo-Philipp Wich
08848936dd all: remove redundant board.d/00_model files
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47753
2015-12-04 11:07:06 +00:00
Jo-Philipp Wich
7cf1ff8a75 imx6: switch from uci-defaults to board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47738
2015-12-03 23:07:20 +00:00
Luka Perkov
8d8ef5288c imx6: ventana: remove invalid video options from bootscript
Removed video related kernel params that are only appropriate for the
Freescale downstream vendor kernel and not appriate for mainline linux.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47532
2015-11-20 05:21:19 +00:00
Luka Perkov
d8d318f344 imx6: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 47513
2015-11-19 08:00:17 +00:00
Luka Perkov
71a92988e3 imx6: remove obsolete VENTANA_DTS from profile
The device-tree files are now specified in the image Makefile

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47512
2015-11-18 22:53:43 +00:00
Luka Perkov
baa8b933ec imx6: add Vetnana LVDS support
These patches have been submitted to upstream Linux and are pending acceptance.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47511
2015-11-18 22:06:54 +00:00
Luka Perkov
7b931ba95c imx6: ventana: fix GW16083 device-tree patch
The 206-ARM-imx-ventana-added-GW16083-to-device-tree.patch merged wrong in
the conversion from 3.18 to 4.1. This patch resolves that and puts the
device-tree nodes in the correct place.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47510
2015-11-18 22:06:50 +00:00
Luka Perkov
5f3d29f4e6 imx6: drop support for kernel 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 47509
2015-11-18 21:36:36 +00:00
Luka Perkov
03401fed5e imx6: convert ventana images to squashfs+ubifs overlay
Replace the ventana ubi images from a single rootfs volume containing the
rootfs as well as kernel+dtbs in the boot/ subdir to a multi-volume ubi
containing kernel+dtbs+bootscript in 'root' ubifs volume, rootfs in 'rootfs'
squasfs volume, and rootfs_data an empty ubifs volume.

At the same time move ventana image creation over to using the new
TARGET_DEVICE syntax as a cleanup.

Additionally removed FIT image creation as it is recommended that this be
done manually to produce signed FIT images if needed.

Note that a bootscript is needed for Ventana to change its default mtdparts
to rename the 2nd partition from 'rootfs' to 'ubi'. This is because there
are patches in OpenWrt kernels that try to auto-attach and auto-mount and these
get in the way if the mtd partition is named 'rootfs'.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47508
2015-11-18 21:35:24 +00:00
Luka Perkov
ca26bf8932 imx6: kernel: add UBI_BLOCK support
UBI_BLOCK support is needed for mounting squashfs over UBI

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47507
2015-11-18 21:35:16 +00:00
Luka Perkov
486dc85e72 imx6: switch to v4.1
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 47506
2015-11-18 21:35:12 +00:00
Luka Perkov
8c65560497 imx6: add Gateworks GW551x support
Upstream patch: e9d6d6b62f306ba83e1441af5daf2809a6167474

Add support for the Gateworks GW5510 board featuring:
 * i.MX6 SoC
 * up to 512MB DDR3
 * up to 2GB NAND flash
 * 1x miniPCIe socket (with USB)
 * HDMI out (micro-HDMI)
 * HDMI in (micro-HDMI) (currently supported by only vendor kernel)
 * TTL level I/O (supported by GW16111 breakout board):
  * I2C
  * 2x UART
  * CAN
  * 2x DIO (GPIO/PWM)
  * USB OTG

Also add support to OpenWrt build system

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 47505
2015-11-18 21:35:09 +00:00
Hauke Mehrtens
55a912f43e kernel: update kernel 3.18 to version 3.18.23
Changelog:
 * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.22
 * https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.23

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47334
2015-11-01 13:45:57 +00:00
Felix Fietkau
6bc9a6d0a8 imx6: add v4.1 support
Build and boot tested on the following hardware:
 * GW54xx
 * GW53xx
 * GW52xx
 * GW51xx

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 47331
2015-11-01 12:19:32 +00:00
Felix Fietkau
f5683a0a86 imx6: image: Remove custom mkfs targz override as base should be fine now
It was wrong anyway, missing file sort order parameter which was fixed
in base month ago.

Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 47312
2015-10-31 09:28:25 +00:00
Felix Fietkau
e09d32dd96 imx6: image: Refactor sanitize_profile_name using PROFILE_SANITIZED variable
Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 47308
2015-10-31 09:27:49 +00:00
Luka Perkov
9c7336e0f9 imx6: fix platform checking
Fix platform checking when configuring networks and when doing sysupgrade.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 47168
2015-10-10 12:35:02 +00:00
Felix Fietkau
1061f93476 imx6: disable ext2/ext3 filesystem support (ext4 is enough)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47032
2015-09-24 08:37:35 +00:00
Rafał Miłecki
39940fac6b imx6: add platform_pre_upgrade for sysupgrade
We're in process of cleaning nand_do_platform_check. Currently is leaves
a special mark in /tmp/sysupgrade-nand-path triggering some diffent code
path in nand_upgrade_stage1. This can be a bit confusing.

The plan is to have the check function only check the image and nothing
else. Then platform code (platform_pre_upgrade) should trigger NAND
specific upgrade path. This is what this patch implements.

This follows ar71xx, lantiq and partially bcm53xx.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46944
2015-09-15 16:05:03 +00:00
Jonas Gorski
76d079204d kernel: update 3.18 to 3.18.14
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
Luka Perkov
22045c383d imx6: put uboot-envtools in DEFAULT_PACKAGES
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45478
2015-04-17 13:47:13 +00:00
Luka Perkov
bb828e30b0 imx6: add missing patches from 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45378
2015-04-11 10:46:20 +00:00
Luka Perkov
d21b92af8e imx6: drop 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45371
2015-04-11 10:28:00 +00:00
Luka Perkov
912a6371f8 imx6: switch to 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45370
2015-04-11 10:27:49 +00:00
Luka Perkov
1e2f88b17b imx: add initial version of 3.18 support
This is build tested only.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45125
2015-03-29 05:48:56 +00:00
John Crispin
f04a268a04 kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44614
2015-03-06 07:56:34 +00:00
John Crispin
fa097e5ae5 kernel: disbale HAMRADIO in generic config
HAMRADIO enabled in all generic configs, but no one platform directly
use related drivers/protocols. This symbol is only used for kmod-ax25
package modules. Furthermore, half of platforms explicitly disables
this symbol, what silently disables build of modules for kmod-ax25
package.

So disable HAMRADIO by-default in generic config, add it to kmod-ax25
package and remove it from platform specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44613
2015-03-06 07:56:21 +00:00