Commit graph

33668 commits

Author SHA1 Message Date
Felix Fietkau
0628630664 build: add pure make tolower/toupper funtions that do not require shell calls
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48105
2016-01-03 20:57:53 +00:00
Felix Fietkau
1f5f096faa mac80211: add rtl8xxxu
OpenWrt is often used to develop or test new devices
Some users might want to test and help to improve
this new driver

upstream commit notice 26f1fad29ad973b0fb26a9ca3dcb2a73dde781aa

New driver: rtl8xxxu (mac80211)
This is an alternate driver for a number of Realtek WiFi USB devices,
including RTL8723AU, RTL8188CU, RTL8188RU, RTL8191CU, and RTL8192CU.
It was written from scratch utilizing the Linux mac80211 stack.

After spending months cleaning up the vendor provided rtl8723au
driver, which comes with it's own 802.11 stack included, I decided to
rewrite this driver from the bottom up.

Many thanks to Johannes Berg for 802.11 insights and help and Larry
Finger for help with the vendor driver.

The full git log for the development of this driver can be found here:
git git://git.kernel.org/pub/scm/linux/kernel/git/jes/linux.git
    branch rtl8723au-mac80211

This driver is still under development, but has proven to be very
stable for me. It currently supports station mode only. It has support
for OFDM and CCK rates. It does lack certain features found in the
staging driver, such as power management, AMPDU, and 40MHz channel
support. In addition it does not support AD-HOC, AP, and monitor mode
support at this point.

The driver is known to work with the following devices:
Lenovo Yoga (rtl8723au)
TP-Link TL-WN823N (rtl8192cu)
Etekcity 6R (rtl8188cu)
Daffodil LAN03 (rtl8188cu)
Alfa AWUS036NHR (rtl8188ru)

Compile tested only

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 48104
2016-01-03 20:57:38 +00:00
Felix Fietkau
0f84880a9d mac80211: iwlwifi: update firmware to ucode -16 version
We don't use Kernel drivers but ucode -16 is
usable on Kernel 4.3+ - with backports and mac80211
this should work on older Kernel versions too.

Intel does not provide a changelog.

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 48103
2016-01-03 20:57:31 +00:00
Felix Fietkau
eee06021ca mac80211: mt7601u use linux-firmware
upstream added mt7601u firmware with commit
9df5430a3c1bf4fa92d9198b6d7d8713408ff6bc Add firmware for mt7601u. version 34

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 48102
2016-01-03 20:57:23 +00:00
Felix Fietkau
ef215468f1 ar71xx: ensure that LOADADDR is passed to lzma-loader
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48101
2016-01-03 20:57:16 +00:00
Felix Fietkau
c5dfbea1e8 package/network/config/gre: ipv6 gre kmod package name was wrong
Source package gre was depending on kmod-ip6-gre, however the actual
kernel module package that is created is kmod-gre6.  Therefore
update (source) package gre for ipv6 gre support.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 48100
2016-01-03 20:57:06 +00:00
Felix Fietkau
74c36b9d20 wpa_supplicant: set regulatory domain the same way as hostapd
In sta-only configuration, wpa_supplicant needs correct regulatory
domain because otherwise it may skip channel of its AP during scan.

Another alternative is to fix "iw reg set" in mac80211 netifd script.
Currently it fails if some phy has private regulatory domain which
matches configured one.

Signed-off-by: Dmitry Ivanov <dima@ubnt.com>

SVN-Revision: 48099
2016-01-03 20:56:57 +00:00
Felix Fietkau
8e9eed3442 iproute2: update to 4.3.0
iproute2-4.0 had connmark support added by nbd.  This does not work
with 4.x kernels.  iproute2-4.3 is the latest version and has his
changes mainlined.  This patch updates the package to iproute2-4.3
and fixes the patches so that it compiles.  This should resolve
ticket #21374.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 48098
2016-01-03 20:56:45 +00:00
Felix Fietkau
f49dadb0bd ar71xx: fix factory images for WNR2200 (#19807)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48085
2016-01-03 14:45:26 +00:00
Felix Fietkau
def6be413c target/sdk: Fix filename with external toolchain
When building SDK with external toolchain, don't
include _gcc in the filename

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 48084
2016-01-03 14:45:18 +00:00
Felix Fietkau
0a0bfc8507 images imagebuilder: Allow to add sanitized extra name
For final output image names allow user to add an
extra string (which is sanitized).  This is particularly
useful with ImageBuilder where you may generate multiple
images from the same base and for the same board,
with different package selections and additional files
(via FILES=).

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 48083
2016-01-03 14:44:56 +00:00
Felix Fietkau
150a1b18c5 images: use configured distribution name for output image names
We allow to configure the version distribution name;
let's also use it for the final image filenames.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 48082
2016-01-03 14:44:48 +00:00
Felix Fietkau
d69efa4e15 targets: Use configured distribution name for SDK, IB, and Toolchain tarball names
We allow to configure the version distribution name;
let's also use it for the tarballs (SDK, ImageBuilder,
and SDK).

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 48081
2016-01-03 14:44:42 +00:00
Felix Fietkau
2274fbc8db target/toolchain: Fix tarball filename
Toolchain makefile was missing include of version.mk
so the openwrt version was missing from the filename.
This patch fixes that.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 48080
2016-01-03 14:44:36 +00:00
Felix Fietkau
48fc1f9781 build: for cmake, always use ccache from staging dir instead of relying on the host
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48079
2016-01-03 14:44:30 +00:00
Felix Fietkau
23953244a8 busybox: adjust convert_menuconfig.pl to emit relative path references for Config.in files and refresh generated files
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48078
2016-01-03 11:38:31 +00:00
Felix Fietkau
182dd0db16 busybox: fix handling of special characters in path when converting menuconfig
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48077
2016-01-03 11:36:38 +00:00
Felix Fietkau
67877462a2 malta: fix generating network configuration
With the default network config provided by package base-files present,
board_detect won't create a new config from board.json.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 48076
2016-01-03 11:36:26 +00:00
Felix Fietkau
0da9da0d33 ar71xx: another fix to wndr3700_board_detect
My last bugfix (r47538) introduced a new bug in wndr3700_board_detect
(again...).

Assigning the result of ar71xx_get_mtd_offset_size_format to the model
variable before stripping of garbage using awk will cause all NUL bytes to
be removed before awk is applied, leading to model strings like
"NETGEAR WNDRMACv2NETGEAR", where a NUL byte after the v2 is supposed to
terminate the string.

Fix by calling ar71xx_get_mtd_offset_size_format twice, once piping to awk
directly.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 48075
2016-01-03 11:09:45 +00:00
Rafał Miłecki
b836a7c29d ledtrig-netdev: don't stop timer on events for different interfaces
This fixes regression introduced in my recent ledtrig-netdev commit.
Events triggered by different interfaces were stopping timer so it
wasn't working for tx/rx mode.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48072
2016-01-02 20:38:56 +00:00
Felix Fietkau
6314c24a04 perf: select objdump instead of the full binutils package
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48071
2016-01-02 16:19:39 +00:00
Felix Fietkau
c69ffda546 ramips: clean up and refresh kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48070
2016-01-02 14:48:27 +00:00
Felix Fietkau
140be9f1a5 ramips: fix performance counters on mt7621
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48069
2016-01-02 14:48:11 +00:00
Felix Fietkau
2004f415bb perf: add myself as a maintainer
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48068
2016-01-02 14:48:04 +00:00
Felix Fietkau
6467fef419 perf: fix musl compatibility
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48067
2016-01-02 14:47:57 +00:00
Felix Fietkau
d3e233f02c perf: fix parallel build support, explicitly disable more library dependencies
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48066
2016-01-02 14:47:48 +00:00
Felix Fietkau
636a22cae2 perf: build in a copy of the source dir instead of relying on make clean
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48065
2016-01-02 14:47:42 +00:00
John Crispin
fb2d204ce4 ralink: more esw_rt3050 fixes
the IRQ was not setup properly causing an oops

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48064
2016-01-02 11:44:08 +00:00
Rafał Miłecki
ef53dc754f bcm53xx: switch to simpler devm_gpiod_get in USB driver
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48062
2016-01-02 10:49:46 +00:00
Rafał Miłecki
7bede46e58 kernel: make bcm47xxpart work with TRX flashed at bad block(s)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48061
2016-01-02 00:33:48 +00:00
Rafał Miłecki
224984ca01 kernel: drop bcm47xxpart patch for Xiaomi
It was never tested, most likely not working (because of le32_to_cpu)
and not upstreamed.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48060
2016-01-02 00:33:31 +00:00
Imre Kaloz
cae1c44e4f generic/4.4: update to 4.4-rc7
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 48059
2016-01-01 22:02:47 +00:00
John Crispin
9242d27b4a V2 ar71xx : Add Support for the Bitmain Antrouter R1
This patch adds support for the Bitmain Antrouter R1

http://wiki.openwrt.org/toh/bitmain/r1

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 48058
2016-01-01 21:21:13 +00:00
John Crispin
e0019b33a4 lantiq: ltq-vmmc: Fix compilation with linux 4.4
gpio.h needs the linux/ prefix with linux 4.4.

SVN-Revision: 48057
2016-01-01 21:21:04 +00:00
John Crispin
8c80e915a0 lantiq: Add the xbar to vr9.dts
linux 4.4 (since commit 08b3c894e56580b8ed3e601212a25bda974c3cc2
"MIPS: lantiq: Disable xbar fpi burst mode") requires that the xbar is
defined in the .dts of vrx200 (VR9) SoCs.

SVN-Revision: 48056
2016-01-01 21:21:00 +00:00
John Crispin
6ca6a98622 ramips: Remove LED GPIO definitions in MQmaker WiTi device tree
LED's were defined wrong in the device tree file, they are hardware driven because they are connected directly to the switch chip and wireless chips respectively, thus no GPIO addresses are assigned to them. It is safe to remove them from the device tree file to stop confusion.

Signed-off-by: Sebastian Careba <nitroshift@yahoo.com>

SVN-Revision: 48055
2016-01-01 21:20:54 +00:00
John Crispin
dc69b89c24 ltq-vdsl-app: re-add lowlevel settings
Add back a slightly modified version of the lowlevel settings which
where removed with r46920.

In compare to the old lowlevel settings, the B43c tone is added to
tone_adsl_b and tone_adsl_bv.

If an unsupported tone value is used, the auto probing mode is used, in
compare to the fallback to tone_adsl_av and tone_vdsl_av with the old
lowlevel settings.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48054
2016-01-01 21:20:24 +00:00
John Crispin
4908088268 ltq-vdsl-app: enable G.993.5 XTSE bit by default
According to ITU-T G.997.1 Amendment 2 (04/2013) section 2.1, bit 3 of
XTSE octet 8 either allow or denies the initialization of G.993.5.

Even if the current redistributable xDSL firmware doesn't include
G.993.5 vectoring support, enable this bit by default to allow people to
get their G.993.5 line working using a custom xDSL firmware.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48053
2016-01-01 21:20:16 +00:00
John Crispin
846124f536 ltq-vdsl-app: let the driver/app probe the xtse on missing annex
r47933 revealed that the driver/app in combination with the chosen
firmware does a good job in selecting a working xtse.

Use this probing mode if no annex is specified.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48052
2016-01-01 21:20:08 +00:00
John Crispin
7816dffd03 ltq-vdsl-app: add/enable missing G.993.2 XTSE bits
This patch adds the missing VDSL2 bits to the annex specific XTSE (like
it should be according to the comments above the XTSE bits).

Since r47933 it's mandatory to remove the annex option to switch to
VDSL2 (only) operation mode.

As shown by ticket #21436 and a few mails I received personally, even
experienced users are not aware that they have to remove the annex
option to get their VDSL2 line working and as shown by this patch it
doesn't need to be that "complicated".

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48051
2016-01-01 21:20:02 +00:00
John Crispin
2625c5621d ltq-vdsl-app: use the final xtse format
This way we can drop the call to sed.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48050
2016-01-01 21:19:55 +00:00
John Crispin
de7dce21a3 ralink: add WRTnode2 platform and led support
Signed-off-by: xzmu <xzmu@wrtnode.com>

SVN-Revision: 48049
2016-01-01 21:19:50 +00:00
John Crispin
df165974c3 ledtrig-netdev: add support for renamed devices
The ppp0 interface is renamed after the connection is established. Due
to a missing NETDEV_REGISTER event, the ledtrig-netdev isn't aware of
the renamed interface and literally ignores the device
(no tx/rx indication, led isn't switched off with 'ifdown wan').

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48048
2016-01-01 21:19:41 +00:00
John Crispin
6f95d749d6 lantiq: match default xdsl mode and default wan interface
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48047
2016-01-01 21:19:32 +00:00
John Crispin
a9896bf106 lantiq: convert vendorid into human readable form
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48046
2016-01-01 21:19:27 +00:00
John Crispin
436fdee272 lantiq: add the current profile to the stats output
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48045
2016-01-01 21:19:21 +00:00
John Crispin
28a700de9b lantiq: TDW8980 - use devicename:colour:function led naming scheme
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48044
2016-01-01 21:19:12 +00:00
John Crispin
c584aed6b1 lantiq: P2812HNUFX - move usb leds to P2812HNU-F1
The P2812HNU-F3 doesn't have usb leds. Only the P2812HNU-F1 has those
leds.

Reported-by: Sylwester Petela <sscapi@gmail.com>
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48043
2016-01-01 21:18:59 +00:00
John Crispin
3cbfc74cde lantiq: use devicename:colour:function led naming scheme
The leds of the following boards are not renamed due to lack of
manuals/informations:

- ARV7519PW
- ARV7510PW22
- ARV4510PW

The leds of the ARV4518PWR01* boards are unchanged, since the leds doesn't
match the leds from the manual or pictures (e.g. there shouldn't be a wps led).

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48042
2016-01-01 21:18:54 +00:00
John Crispin
4cf3fd49fc lantiq: add support for indicating the boot state using three leds
The BTHOMEHUBV5A has a RGB power led, where every colour is perfect to
indicate the current boot state. This patch adds support for such cases.

The existing led sequences should be the same as before.

Boards which are using a led different from power (like TDW89x0) are
changed to switch of the led after boot

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48041
2016-01-01 21:18:47 +00:00