Commit graph

18093 commits

Author SHA1 Message Date
Ben Whitten
86d037e4a2 at91: add support for the WB45N module from Laird
This module from Laird includes the following:
  - CPU Atmel SoC ARM926EJS
  - Wifi AR6003
  - Bluetooth CSR8510
  - RAM 64MB LPDDR
  - FLASH 128MB

The flash is a dual image layout, kernel a/b, rootfs a/b, and a user
partition.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
2017-10-15 00:24:21 +02:00
Ben Whitten
a7c8112a0f at91: separate MKUBIFS opts to defaults in the sub target
Instead of applying global defaults based on selected board, transition
to using a per board setting for UBIFS and UBINIZE.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
2017-10-15 00:24:21 +02:00
Ben Whitten
3b6f9978d3 at91: refresh kernel config, enable UBI block and DMA
The platform generates squashfs images in a UBI block but misses the
kernel module to be able to mount the block.
DMA is also enabled to allow systems which include them in the DTS to
use it.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
2017-10-15 00:24:21 +02:00
Lucian Cristian
b4fefe7b6e sunxi: backport support for Allwinner Security System PRNG
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2017-10-15 00:24:21 +02:00
Robert Marko
443abb8ccd ar71xx: add support for Mikrotik RB750P-PBr2
Specifications:
- SoC: Qualcomm QCA9531 (650MHz)
- RAM: 64MB
- Storage: 16MB NOR SPI flash
- Ethernet: 5x100M (1 PoE in, 4 PoE out)
- Outdoor use ready

This ethernet router is based on the same platform as the hEX PoE lite.

Installation

1. login to the Mikrotik WebUI to backup your licence keys
2. setup a DHCP/BOOTP Server with:
     * DHCP-Option 66 (TFTP server name) pointing to a local TFTP
       Server within the same subnet of the DHCP range
     * DHCP-Option 67 (Bootfile-Name) matching the initramfs filename
       of the to be booted image
3. connect the port labled internet to your local network
4. keep the reset button pushed down and power on the board

The board should load and start the initramfs image from the TFTP
Server. Login as root/without password to the started LEDE via ssh
listing on IPv4 address 192.168.1.1. Use sysupgrade to install LEDE.

Revert to RouterOS

Use the "rbcfg" package on in LEDE:
  * rbcfg set boot_protocol bootp
  * rbcfg set boot_device ethnand
  * rbcfg apply

Open Netinstall and reboot routerboard. Now netinstall sees routerboard
and you can install RouterOS. If NetInstall gets stuck on Sending offer
just wait for it to timeout and then close and open Netinstall again.

Click on install again.

In order for RouterOS to function properly, you need to restore license
for the device. You can do that by including license in NetInstall

Signed-off-by: Robert Marko <robimarko@gmail.com>
2017-10-14 10:48:29 +02:00
Daniel Kucera
6f008af3f0 ramips: add support for Kimax U25AWF-H1
Kimax U-25AWF-H1 is is a 2,5" HDD Enclosure with Wi-Fi/Eth conection
and battery, based on MediaTek MT7620A.

Patch rewritten from: https://forum.openwrt.org/viewtopic.php?pid=305643

Specification:

- MT7620A CPU
- 64 MB of RAM
- 16 MB of FLASH
- 802.11bgn WiFi
- 1x 10/100 Mbps Ethernet
- USB 2.0 Host
- UART for serial console

Flash instruction:
1. Download lede-ramips-mt7620-u25awf-h1-squashfs-sysupgrade.bin
2. Open webinterface a upgrade
3. After boot connect via ethernet to ip 192.168.1.1

Signed-off-by: Daniel Kucera <daniel.kucera@gmail.com>
[fix reset button gpio, don't add a lan/wan vlan config for single
port board, add -H1 suffix do make sure that this revision of the
board is supported/tested]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-14 10:48:29 +02:00
Chris Blake
f2b7d9dc1c mpc85xx: Add Aerohive HiveAP-330 Access Point
The following adds the Aerohive HiveAP-330 Access Point to LEDE under
the mpc85xx/p1020 subtarget.

Hardware:
- SoC: Freescale P1020NSE2DFB
- NAND: Intel JS28F512M29EWH 64MB
- Memory: 2x ProMOS V59C1G01168QBJ3 128MB (Total of 256MB)
- 2.4GHz WiFi: Atheros AR9390-AL1A
- 5.0GHz WiFi: Atheros AR9390-AL1A
- Eth1: Atheros AR8035-A PoE
- Eth2: Atheros AR8035-A
- TPM: Atmel AT97SC3204
- LED Driver: TI LP5521

Flashing:
1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a
password of administrator or AhNf?d@ta06 if prompted.
2. Once in U-Boot, tftp boot the initramfs image:
    dhcp;
    tftpboot 0x1000000 192.168.1.101:lede-
mpc85xx-p1020-hiveap-330-initramfs.zImage;
    tftpboot 0x6000000 192.168.1.101:lede-mpc85xx-p1020-hiveap-330.fdt;
    bootm 0x1000000 - 0x6000000;
3. Once booted, scp over the sysupgrade file and sysupgrade the device
to flash LEDE to the NAND.
    sysupgrade /tmp/lede-mpc85xx-p1020-hiveap-330-sysupgrade.img

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-10-14 01:23:47 +02:00
Chris Blake
8cd6686ef8 mpc85xx: Add cmdline override patch
This patch adds a new kernel option called CONFIG_CMDLINE_OVERRIDE. This
setting is for devices with locked down u-boot environments, where users
are unable to change the default bootargs. When set, the fdt driver will
propagate the cmdline for the kernel from chosen/bootargs-override
instead of chosen/bootargs as long as it exists within the DTB.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-10-14 01:21:52 +02:00
Chris Blake
a92f73e922 mpc85xx: Enable initramfs for p1020 subtarget
The following patch enables building of initramfs images by default for
the P1020 subtarget in mpc85xx.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-10-14 01:19:35 +02:00
Sandeep Sheriker Mallikarjun
1b368f1641 at91: Add ext4 filesystem
Add ext4 filesystem for creating sdcard image with ext4 rootfs and
removing ext2 as it superset of ext4.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-10-14 00:33:34 +02:00
Sandeep Sheriker Mallikarjun
43a0b72c3c at91: Enable SDHCI for sama5 in default config
Enabled SDHCI for sama5 in kernel default config and this is needed
to mount sdcard rootfs partition during boot.

Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-10-14 00:33:34 +02:00
Hauke Mehrtens
c4f720b19a at91: refresh kernel configuration
This was done by running "make kernel_oldconfig" and
"make kernel_oldconfig CONFIG_TARGET=subtarget"

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-14 00:32:39 +02:00
Rafał Miłecki
2cd32a3304 kernel: add fix for bgmac with B50212E B1 PHY
This PHY requires some extra programming to work reliably with all
devices. Backport upstream fix for it.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-10-13 13:54:22 +02:00
Yangbo Lu
67c0c5978d layerscape: only support 64-bit for ls1088ardb/ls2088ardb
This is no requirement and plan to support 32-bit for ls1088ardb
and ls2088ardb. Current 32-bit firmware for them couldn't work,
so only keep 64-bit support for these two boards in menuconfig.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-12 23:40:27 +02:00
Yangbo Lu
4f3ddcb0e9 layerscape: fix compile issue for usb ehci-fsl driver
When build firmware for layerscape target with CONFIG_ALL_NONSHARED=y,
there would be a compile issue of usb ehci-fsl driver. Actually this
driver was for PPC platforms initially and was not ready for non-PPC
now, but a kernel kconfig patch removed PPC dependency for it. So that
kernel patch should be reverted.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-12 23:40:26 +02:00
Hauke Mehrtens
27f23bac8f ar71xx: fix section mismatches
Fix some section mismatches found with kernel 4.9.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-11 22:36:04 +02:00
Hauke Mehrtens
7bbf4117c6 ar71xx: Add kernel 4.9 support
This add support for kernel 4.9 to the ar71xx target.
It was compile tested with the generic, NAND and mikrotik subtarget.
Multiple members of the community tested it on their boards and did not
report any major problem so far.

Especially the NAND part received some changes to adapt to the new
kernel APIs. The serial driver hack used for the Arduino Yun was not
ported because the kernel changed there a lot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-11 22:32:39 +02:00
Hauke Mehrtens
2909a4b78e brcm47xx: relocate the stack in loader
By default we are reusing the stack provided by CFE, like it is intended
by CFE. On my WRT54GS it is located at 0x8043BF30, so a big kernel image
could overwrite it. Relocate it to a different memory region which is
still under the 8MB RAM, but in the higher area. We only need this
memory region for the stack of the loader, Linux will set up this
for its own.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-11 21:36:24 +02:00
Hauke Mehrtens
d5cf4a5aa4 brcm47xx: relocate loader to higher address
The boot process on a WRT54GL works the following way:
1. CFE gets loaded by the boot rom from flash
2. CFE loads the loader from the flash and gzip uncompresses it
3. CFE starts the loader
4. The loader stores the FW arguments and relocates itself to
   BZ_TEXT_START (now 0x80600000)
5. The loader reads the Linux image from flash
6. The loader lzma decompresses the Linux image to LOADADDR (0x80001000)
7. The loader executes the uncompress Linux image at LOADADDR

The BZ_TEXT_START was set to 0x80400000 before. When the kernel gets
uncompressed and is bigger than BZ_TEXT_START - LOADADDR it overwrote
the loader which was currently uncompressing it and made the board
crash. Increase the BZ_TEXT_START my 2 MB to have more space for the
kernel. Even on 16MB RAM devices the memory goes till 0x80FFFFFF so this
should not be a problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-11 21:36:24 +02:00
Rafał Miłecki
f98f83eada bcm53xx: backport DTS changes up to the first 4.15 queued commits
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-10-10 10:22:24 +02:00
Alexander Couzens
b73986a826
ramips/mt76x8: add initramfs support for tplink 841n v13
The tplink 841n v13 requires an tplink v2 image header in
front of an initramfs image.

To boot an initramfs image:
- break the uboot by holding the '4' key
- setup your tftp server 192.168.0.255
- tftp 81000000 lede-ramips-mt76x8-tl-wr841n-v13-initramfs-kernel.bin
- bootm

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-10-09 17:34:41 +02:00
John Crispin
c972779e98 mediatek: fix a sleep while atomic bug inside the ethernet driver
this sometimes happens when we have hw nat enabled.

Signed-off-by: John Crispin <john@phrozen.org>
2017-10-09 11:29:01 +02:00
Stijn Tintel
f12c42940d kernel: bump 4.9 to 4.9.54
Refresh patches.
Remove upstreamed patches:
- ramips/0067-enable-mt7621-xhci.patch
- ramips/0085-pinmux-util.patch
- ramips/301-fix-rt3883.patch

Compile-tested on brcm2708/bcm2708, octeon, ramips/mt7621, x86/64.
Runtime-tested on brcm2708/bcm2708, octeon, ramips/mt7621, x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-08 20:51:03 +03:00
Kevin Darbyshire-Bryant
e77fa68f1f kernel: bump 4.4 to 4.4.91
Refresh patches.

Compile-tested for: ar71xx Archer C7 v2
Run-tested on: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2017-10-08 20:51:03 +03:00
Daniel Golle
34b153d7ad sunxi: build image for the NanoPi NEO
The NanoPi NEO is a small Allwinner H3 based board available with
different DRAM configurations.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-10-08 17:16:39 +02:00
Daniel Golle
333f90347e sunxi: kernel: add patches for NanoPi NEO
Enable dwmac-sun8i Ethernet core to use the built-in FastEthernet port.
Enable exposed UART, USB and I2C pins.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-10-08 17:16:39 +02:00
Stijn Tintel
d2fdece2e1 layerscape: refresh patches
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-08 16:34:37 +03:00
Stijn Tintel
239dff6697 kernel: update and refresh patches
The lantiq patch 0028-NET-lantiq-various-etop-fixes.patch and sunxi
patch 0051-stmmac-form-4-11.patch no longer applied after applying the
the "generalize napi_complete_done()" patch.
Update them so they apply, and refresh patches while at it.

Fixes: 9aeb7ce8dc ("generic: net: generalize napi_complete_done")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-08 16:31:58 +03:00
Pavel Kubelun
9aeb7ce8dc generic: net: generalize napi_complete_done
Backport upstream commit that improves ethernet performance by a
small amount.

Compile and run tested on ipq8065.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2017-10-08 15:19:07 +03:00
Pavel Kubelun
b2ea46fe23 generic: net: tcp: backport tcp tx performance patches
An overall throughput gain of 22 % for heavy TCP use over a single TX queue.

Original patchset comment
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v4.13&id=3f4888adae7c1619b990d98a9b967536f71822b8

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2017-10-08 15:19:07 +03:00
Stijn Tintel
3a69ad3b2a kernel: split 82574L patch into multiple files
When refreshing patches that cointain multiple patches including headers
in a single file, quilt will remove the headers from all but the first
patch. This makes it difficult to review commits that refresh patches.
Next to that, if only a few of the patch series are accepted in -stable,
the patch needs to be manually modified. With each patch in a separate
file, it's just a matter of git rm.

Refresh patches while at it.

Patchwork links:
[1/5] https://patchwork.kernel.org/patch/9857487/
[2/5] https://patchwork.kernel.org/patch/9857489/
[3/5] https://patchwork.kernel.org/patch/9857495/
[4/5] https://patchwork.kernel.org/patch/9857491/
[5/5] https://patchwork.kernel.org/patch/9857493/

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-08 15:18:34 +03:00
Hauke Mehrtens
cf17e034bc kernel: Add some more generic config options
These options are deactivating some kernel modules for IP blocks not
uses on this SoC. I saw the same when working with the ARM64 Marvell
board so it is better to move them to generic.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-08 13:39:44 +02:00
Hauke Mehrtens
2135125182 layerscape: remove wifi config
This is provided by the mac80211 package

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-08 13:39:44 +02:00
Hauke Mehrtens
29a6c4fcfb kernel: add missing config options for layerscape target
This fixes some problems found by build bot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-08 13:39:44 +02:00
Andrey Jr. Melnikov
2cb8f0a4cf ar71xx: Fix NULL pointer dereferece in at803x_link_change_notify()
Check pdata pointer before use to avoid OOPS if dev_get_platdata() return
NULL.

Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com>
2017-10-07 23:19:15 +02:00
Yangbo Lu
9c9f7b0434 layerscape: select sdk dts for ls1043ardb/ls1046ardb
ls1043ardb/ls1046ardb should use sdk dts. This patch is
to fix this.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:23 +02:00
Yangbo Lu
c0b089da8a layerscape: fix CPU_TYPE for armv8_32b targets
Layerscape uses Cortex-A53 or Cortex-A72 CPU. It's proper
to set below CPU_TYPE for 32-bit mode.
CPU_TYPE:=cortex-a15
CPU_SUBTYPE:=neon-vfpv4

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:23 +02:00
Yangbo Lu
8fdda1cc10 layerscape: add linux 4.9 support
This patch is to add linux 4.9 support for layerscape.
All these kernel patches are from NXP LSDK 1709 release.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:23 +02:00
Yangbo Lu
19951bbf57 layerscape: drop linux 4.4 support
This patch is to drop linux 4.4 for layerscape.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Yangbo Lu
e3f47958dd layerscape: make uImage with zImage for 32-bit kernel
uImage should be made with zImage. This patch is to support
making uImage with zImage.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Yangbo Lu
a5ad3a2c80 layerscape: update memory layout according to LSDK
The uniform memory layout of NOR/QSPI/NAND/SD media on all Layerscape platforms:
+-----------------------------+---------|--------------|-----------------+
|Firmwre Definition           | MaxSize | Flash Offset | SD Start Block #|
|-----------------------------|---------|--------------|-----------------|
|RCW+PBI                      | 1MB     | 0x00000000   | 0x00008         |
|-----------------------------|---------|--------------|-----------------|
|Boot firmware(U-Boot,UEFI)   | 2MB     | 0x00100000   | 0x00800         |
|-----------------------------|---------|--------------|-----------------|
|Boot firmware Environment    | 1MB     | 0x00300000   | 0x01800         |
|-----------------------------|---------|--------------|-----------------|
|PPA firmware                 | 2MB     | 0x00400000   | 0x02000         |
|-----------------------------|---------|--------------|-----------------|
|Secure boot headers          | 3MB     | 0x00600000   | 0x03000         |
|-----------------------------|---------|--------------|-----------------|
|DPAA1 FMAN ucode             | 256KB   | 0x00900000   | 0x04800         |
|-----------------------------|---------|--------------|-----------------|
|QE/uQE firmware              | 256KB   | 0x00940000   | 0x04A00         |
|-----------------------------|---------|--------------|-----------------|
|Ethernet PHY firmware        | 256KB   | 0x00980000   | 0x04C00         |
|-----------------------------|---------|--------------|-----------------|
|Scripts                      | 256KB   | 0x009C0000   | 0x04E00         |
|-----------------------------|---------|--------------|-----------------|
|DPAA2 MC firmware            | 3MB     | 0x00A00000   | 0x05000         |
|-----------------------------|---------|--------------|-----------------|
|DPAA2 DPL                    | 1MB     | 0x00D00000   | 0x06800         |
|-----------------------------|---------|--------------|-----------------|
|DPAA2 DPC                    | 1MB     | 0x00E00000   | 0x07000         |
|-----------------------------|---------|--------------|-----------------|
|Device tree(needed by uefi)  | 1MB     | 0x00F00000   | 0x07800         |
|-------------+---------------|---------|--------------|-----------------|
|Kernel       |               | 16MB    | 0x01000000   | 0x08000         |
|-------------| kernel.itb    |---------|--------------|-----------------|
|Ramdisk rfs  |               |32MB     | 0x01100000   | 0x08800         |
+-------------+---------------+---------|--------------|-----------------+

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Yangbo Lu
806624add5 layerscape: rename subtargets and update makefile files
Rename subtargets 32b/64b with armv8_32b/armv8_64b which are
more proper, and update makefile files. There also will be other
subtargets added in the future, like armv7.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Yangbo Lu
4c89f2fcf8 layerscape: take over maintainership
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-07 23:13:22 +02:00
Philip Prindeville
a0c05a7c94 kernel: fix receiver overflow for 82574L under load
Under heavy load it's possible to overrun the 82574L. When this
happens, Other Interrupt happens and that's erroneously interpreted
as a Link Status Change.

    http://patchwork.ozlabs.org/patch/792260/

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
2017-10-07 23:10:39 +02:00
Mathias Kresin
1c4a116a30 ar71xx: add rssileds to WA850RE v1 image
A default rssileds config exists for the TP-Link WA850RE v1 but the
rssiled package is not included by default.

The compressed 17.01.3 image size increases by 3302 bytes which should
be tolerable even for a 4MB flash board.

Fixes: FS#1043

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-07 20:15:03 +02:00
Mathias Kresin
d65b1c815a lantiq: drop phy id specfic compatible string
With kernel commit 7630ea4bda18 ("Documentation: net: phy: improve
explanation when to specify the PHY ID") the purpose of using phy id
specific compatibles was clarified.

Remove the phy id specific compatibles since they are meant to be used
if the phy reports an incorrect or no phy id at all.

Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-07 20:15:03 +02:00
Mathias Kresin
a6bd7255ab lantiq: remove gen_nand compatible string
The generic nand driver fails to load with:

  gen_nand 14000000.nand-parts: platform_nand_data is missing
  gen_nand: probe of 14000000.nand-parts failed with error -22

and the xway-nand driver is used afterwards.

Drop the gen_nand compatible to get rid of the error message.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-07 20:15:03 +02:00
Stijn Tintel
f625df7ab8 kernel: update 4.9 to 4.9.53
Refresh patches.
Compile-tested on brcm2708/bcm2708, octeon and x86/64.
Runtime-tested on brcm2708/bcm2708, octeon and x86/64.

Fixes the following CVEs:
- CVE-2017-1000252
- CVE-2017-12153
- CVE-2017-12154

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-10-07 20:53:21 +03:00
Catrinel Catrinescu
b9c31c44d7 ar71xx: update LED definitions for embedded wireless dorin
Evaluation board 2.2 uses a different status LED pin
The other removed LEDs were never present

Signed-off-by: Catrinel Catrinescu <cc@80211.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-10-07 09:20:41 +02:00
Catrinel Catrinescu
cd4b60c329 ar71xx: ew-dorin target moved from legacy to generic
Embedded Wireless Dorin platform moved from legacy to generic

Signed-off-by: Catrinel Catrinescu <cc@80211.de>
2017-10-07 09:20:04 +02:00