Jonas Gorski
844e92e188
brcm63xx: populate /tmp/sysinfo
...
Take full board name from devicetree, if present. Provide a method
for retrieving the board name.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44833
2015-03-16 11:52:20 +00:00
Jonas Gorski
9c53e344c0
brcm63xx: base-files: rename board_name to board_id
...
Rename board_name to board_id to prepare for using board_name as a
proper name for the board.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44832
2015-03-16 11:52:16 +00:00
Jonas Gorski
ca7f6d28c8
brcm63xx: Add DGND3700 v1 / DGND3800B support
...
This adds support for the Netgear DGND3700 v1 and DGND3800B.
DGND3700 v1 and DGND3800B are exactly the same router, only one difference,
the factory firmware. This patch produces two factory firmwares for each router.
The router includes an onboard NAND flash for extra storage. NAND is currently
not supported in bcm63xx, so no code added for this part. The NOR flash (32MB)
is enough for storing an openwrt firmware.
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: Add back commit message from v1]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44831
2015-03-16 11:52:10 +00:00
John Crispin
4fdb66373f
netlogic: bump to 3.18
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44829
2015-03-16 10:58:43 +00:00
Felix Fietkau
298d67ec7b
mvebu: drop linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44828
2015-03-16 08:29:42 +00:00
John Crispin
d6b3eba475
kernel: add missing MTD_SPLIT_FIT_FW symbol
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44827
2015-03-16 08:05:42 +00:00
John Crispin
c0a15a57bd
sunxi: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44824
2015-03-16 07:41:24 +00:00
John Crispin
eb396d6569
adm5120: drop 3.8 and 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44823
2015-03-16 07:41:19 +00:00
John Crispin
46f01fec7f
ar7: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44822
2015-03-16 07:41:10 +00:00
John Crispin
4d11bb0d23
ixp4xx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44821
2015-03-16 07:41:05 +00:00
John Crispin
cc8b6c6d5b
octeon: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44820
2015-03-16 07:40:59 +00:00
John Crispin
a992489e4b
oxnas: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44819
2015-03-16 07:40:54 +00:00
John Crispin
fe33c185bd
mpc85xx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44818
2015-03-16 07:40:47 +00:00
John Crispin
518d9fd2a0
cns3xxx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44817
2015-03-16 07:40:41 +00:00
John Crispin
43c66cb434
au1000: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44816
2015-03-16 07:40:19 +00:00
John Crispin
fb78ebb813
ar71xx: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44815
2015-03-16 07:40:09 +00:00
John Crispin
de04a1d843
realview: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44814
2015-03-16 07:40:02 +00:00
John Crispin
54f1c710db
malta: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44813
2015-03-16 07:39:57 +00:00
John Crispin
257671615b
lantiq: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44812
2015-03-16 07:39:52 +00:00
John Crispin
7648d80c90
ralink: drop 3.14 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44811
2015-03-16 07:39:46 +00:00
Felix Fietkau
f2f8f6974b
x86: refresh kernel patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44810
2015-03-16 07:12:31 +00:00
Felix Fietkau
9e0759ea26
x86: merge all geode based subtargets into one
...
Build all geode platform drivers into the kernel
Remove kmod-* packages for these drivers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44809
2015-03-16 07:05:30 +00:00
Felix Fietkau
986b8baf9a
x86: remove 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44805
2015-03-16 05:57:04 +00:00
Felix Fietkau
7f7e0a21b8
kernel: remove linux 3.13 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44804
2015-03-16 05:52:02 +00:00
Felix Fietkau
f26bb532cf
omap: remove old kernel versions
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44803
2015-03-16 05:51:56 +00:00
Felix Fietkau
495404e9a4
omap: update to linux 3.18, it has been tested by at least one builder and 3.13 has not been built by buildbot in a long time
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44802
2015-03-16 05:51:52 +00:00
Felix Fietkau
c75c90edf6
kernel: port missing ubi EOF marker support patch to 3.19 and 4.0
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44801
2015-03-16 05:16:14 +00:00
Felix Fietkau
adb6d8f93f
kernel: fix duplicate use of patch number 490
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44800
2015-03-16 05:16:07 +00:00
Felix Fietkau
d6fbb77bc8
kernel: add a few missing config symbols for 3.18+
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44799
2015-03-16 04:47:28 +00:00
Felix Fietkau
d5b99a2d74
kernel: add missing description for GRO optimization patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44798
2015-03-16 04:19:09 +00:00
Felix Fietkau
270bc6427b
kernel: skip GRO for packets bridged to other hosts
...
Eliminates excessive skb copying when bridging from LAN to WLAN on
ramips.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44797
2015-03-15 20:32:09 +00:00
John Crispin
7ea781558f
ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions
...
While the switch positions aren't explicitly labeled as on and off, we've heard
complaints about them being wrong. This patch changes the handling to match the
stock firmware.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44795
2015-03-15 19:39:47 +00:00
John Crispin
7f3013a480
ipq806x: fix AP148 boot from NOR
...
This patch allows AP148 to boot from NOR flash.
As we're using a FIT image as kernel (which includes kernel bin + DTB)
we enable the MTD_SPLIT_FIT_FW kernel option, which will detect the FIT
image and automatically split the "firmware" partition into 2 MTD parts
(kernel + rootfs).
The rootfs will then be parsed and split between rootfs + rootfs_data,
as usual.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44794
2015-03-15 19:39:41 +00:00
John Crispin
582232cd7b
ipq806x: add ap148 bootargs to DT
...
Only one bootargs is really needed: the tty port. All the other
information will use the OpenWrt mechanisms.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44793
2015-03-15 19:39:33 +00:00
John Crispin
9a863f803e
kernel: mtdsplit: add support for FIT image
...
If this option is enabled, the FIT image format will be detected and
split by the mtdsplit code. Detection is based upon the FDT magic, which
will trigger the parsing and detection of the rootfs, ending-up in the
creation of the 2 new partitions.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44792
2015-03-15 19:39:27 +00:00
John Crispin
5ca2ad1063
Fix (invert/revert) Hornet-UB WPS LED state
...
My previous patch regarding the Hornet-UB board
(commit: beed4d82d6a0154b0cd5f7b84e2180215ace6718) actually
causes the WPS led state to be inverted. Practically this meant
that value 0 in /sys/class/led/alfa:blue:wps/brightness would
turn the LED on and any positive value (1-255) would turn it off.
The above of course is confusing and hence reverting this value
back to the way it was before beed4d82d6a0154b0cd5f7b84e2180215ace6718.
Signed-off-by: Janne Cederberg <janne.cederberg@gmail.com>
SVN-Revision: 44791
2015-03-15 19:25:48 +00:00
Jonas Gorski
085b8e0014
b53: global config is part of the management page, not the control page
...
It will now actually enable the mib counters instead of enabling rx/tx for
the first switch port.
Reported-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44788
2015-03-15 14:19:28 +00:00
Jonas Gorski
eed031d460
brcm63xx: brcm63xxpart: fix buffer overrun in of parser
...
We never account for the added partitions from the tag parser, so
allocated two partioness less than needed. This can cause issues when
the memory gets reused before the mtd code can actually add the
partitions.
Fixes oopses like:
[ 0.920000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.924000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.932000] 0x0000002e0000-0x0000003f0000 : "rootfs_data"
[ 0.940000] 0x000000010000-0x0000003f0000 : "linux"
[ 0.948000] CPU 0 Unable to handle kernel paging request at virtual address 00010203, epc == 8028ddf8, ra == 801ad5d4
[ 0.956000] Oops[#1 ]:
[ 0.956000] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.8 #22
[ 0.956000] task: 8181da78 ti: 8181e000 task.ti: 8181e000
[ 0.956000] $ 0 : 00000000 10008f00 00010203 81049e40
[ 0.956000] $ 4 : 00010203 000000d0 00000000 000000fd
[ 0.956000] $ 8 : 00000000 80015490 00000000 80370000
[ 0.956000] $12 : 00000000 00000001 00000000 2f736269
[ 0.956000] $16 : 00010203 000000d0 8007bde0 81482000
[ 0.956000] $20 : 00000000 00000004 81481f80 803c4b78
[ 0.956000] $24 : 00000000 00000000
[ 0.956000] $28 : 8181e000 8181fbe8 80b20000 801ad5d4
[ 0.956000] Hi : 00000000
[ 0.956000] Lo : 00000000
[ 0.956000] epc : 8028ddf8 strlen+0x4/0x20
[ 0.956000] Not tainted
[ 0.956000] ra : 801ad5d4 kstrdup+0x30/0x84
[ 0.956000] Status: 10008f03 KERNEL EXL IE
[ 0.956000] Cause : 00800008
[ 0.956000] BadVA : 00010203
[ 0.956000] PrId : 0002a010 (Broadcom BMIPS4350)
[ 0.956000] Modules linked in:
[ 0.956000] Process swapper/0 (pid: 1, threadinfo=8181e000, task=8181da78, tls=00000000)
[ 0.956000] Stack : 8148aa00 803c4bcc 00000000 801cd9d0 00000000 8148a400 818a1400 003f0000
81482000 8007bde0 8148aa00 800ac78c 8148aa00 00000004 8037ae30 8181fc4c
8148aa00 803bc074 803c0000 80074b84 00000000 00010000 00000004 ffffffff
8037ae30 00000004 8148aa00 00000004 803c4b80 818a1400 803c0000 00000005
81481f80 80074ce0 8181fc84 00000005 81879800 8008ece4 00000000 003f0000
...
[ 0.956000] Call Trace:
[ 0.956000] [<8028ddf8>] strlen+0x4/0x20
[ 0.956000] [<801ad5d4>] kstrdup+0x30/0x84
[ 0.956000] [<8007bde0>] allocate_partition+0x58/0x93c
[ 0.956000] [<80074ce0>] add_mtd_partitions+0x90/0x144
[ 0.956000] [<801cc228>] mtd_device_parse_register+0x78/0xcc
[ 0.956000] [<801e7870>] of_flash_probe+0x658/0x728
[ 0.956000] [<80216ee0>] platform_drv_probe+0x24/0x60
[ 0.956000] [<801221f4>] driver_probe_device+0xcc/0x214
[ 0.956000] [<800466f8>] __driver_attach+0x7c/0xb4
[ 0.956000] [<800c38bc>] bus_for_each_dev+0x94/0xa4
[ 0.956000] [<800c35e4>] bus_add_driver+0x104/0x1ec
[ 0.956000] [<80122400>] driver_register+0xac/0x100
[ 0.956000] [<80113a5c>] do_one_initcall+0x148/0x204
[ 0.956000] [<803cbd1c>] kernel_init_freeable+0x168/0x220
[ 0.956000] [<800157bc>] kernel_init+0x10/0x114
[ 0.956000] [<800108a8>] ret_from_kernel_thread+0x14/0x1c
[ 0.956000]
[ 0.956000]
Code: 03e00008 27bd0028 00801021 <80430000> 10600003 00000000 080a377e 24420001 03e00008
[ 1.192000] ---[ end trace 9d89ccbcae27fe40 ]---
[ 1.200000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 1.200000]
[ 1.200000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44787
2015-03-15 14:19:22 +00:00
Jonas Gorski
9d893d39bd
brcm63xx: kmod-bcm63xx-udc: fix module path for 3.18+
...
Fix the module path for linux 3.18+.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44785
2015-03-15 14:19:10 +00:00
Jonas Gorski
12301a79b7
brcm63xx: fix 6368 cpu1 reg typo
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44784
2015-03-15 14:19:07 +00:00
Felix Fietkau
d8d9282372
lantiq: add a better fix to strip FCS from ethernet packets on XRX200
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44771
2015-03-15 09:47:34 +00:00
Felix Fietkau
55cdb4dbb3
lantiq: enable atm-esi by default for xrx200
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44769
2015-03-15 07:57:51 +00:00
Felix Fietkau
17fdf5fb85
brcm2708: fix mkdosfs command line options order
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44764
2015-03-15 05:18:50 +00:00
Felix Fietkau
65a0244ff8
x86: refresh kernel config
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44759
2015-03-15 04:43:37 +00:00
Felix Fietkau
c062741575
x86: update to kernel 3.18
...
copied target/linux/x86/config-3.14 and target/linux/x86/patches-3.14 to
3.18 equivalents and then tweaked until it built.
Tested on alix2, soekris net4826 and soekris net4521.
Still having trouble with net4826 booting from Grub, alix2 and net4521
are fine.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 44758
2015-03-15 04:43:30 +00:00
Felix Fietkau
50d4775df0
kernel: fix portability issues of the x86 vdso2c utility
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44757
2015-03-15 04:43:22 +00:00
Felix Fietkau
09ac7d4697
kernel: add missing config symbol for 3.18+
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44756
2015-03-15 04:40:10 +00:00
Rafał Miłecki
0a9b7ea932
bcm53xx: support NVRAM prefixes with extra / in devpath
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44755
2015-03-14 16:35:56 +00:00
Felix Fietkau
578aa97f8c
x86: disable rts/cts for serial console in grub - fixes net48xx boot issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44753
2015-03-14 08:38:35 +00:00
Felix Fietkau
c5aa269d57
kernel: linux 3.19 also needs the network namespace related fd export patch ( #19161 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44751
2015-03-14 05:38:14 +00:00