Commit graph

359 commits

Author SHA1 Message Date
John Crispin
cd96421b19 kexec-tools: bump version from v2.0.4 to v2.0.9.
- kexec-tools is now distributed with tarballs of .tar.gz and .tar.xz
   format; .tar.bz2 are not provided anymore.
 - Add CONFIG_KEXEC_LZMA for selecting lzma support.

Patches are updated along to:

 - Remove the now unnecessary patch 0004-mips_regdefs.patch.
 - Drop 100-reduce_size.patch because the size reduction is marginal.
 - Allow zlib and lzma support coexist together.  This patch has been
   merged into upstream project.
 - Fix kexec-tools' configure.ac.
 - Fix a few compilation warnings.

Size comparison of stripped binaries of kexec malta target with both
zlib and lzma support enabled.

 - Before: 41447
 - After:  42583

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 44437
2015-02-13 07:42:13 +00:00
John Crispin
15cc0550c7 kexec-tools: show up only when KERNEL_KEXEC is enabled.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 44436
2015-02-13 07:42:05 +00:00
Luka Perkov
71f96048e6 package: uboot-envtools: add nbg6716 to appropriate group
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44308
2015-02-07 19:59:08 +00:00
John Crispin
c3f2e8fb08 uboot-lantiq: fix P-2812HNU-F1/3 package dependency
After r43987 TARGET_lantiq_xrx200_P2812HNUFX does not exist anymore.
Fix empty menuconfig bootloader selection by making u-boot depend on
one of the new target profiles.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>

SVN-Revision: 44179
2015-01-28 12:08:13 +00:00
John Crispin
255a680a99 uboot-lantiq: add a cgu fix for arx100
http://patchwork.ozlabs.org/patch/431024/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44086
2015-01-23 12:32:54 +00:00
Zoltan Herpai
be86eab8e6 packages: uboot-sunxi: add support for Lamobo R1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44067
2015-01-20 22:50:52 +00:00
Zoltan Herpai
9b103cc1f3 packages: uboot-sunxi: fix GMAC TX delay for Bananapi
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44066
2015-01-20 22:49:47 +00:00
Zoltan Herpai
a5c36c26eb packages: uboot-sunxi: uEnv is used as a script rather than default env
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44048
2015-01-19 00:00:57 +00:00
Zoltan Herpai
8bf446a16b packages: uboot-sunxi: re-add Olimex A13 SOM which went AWOL in u-boot trunk
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 44039
2015-01-18 16:56:08 +00:00
Zoltan Herpai
4d0d09be10 packages: uboot-sunxi: remove unused Hackberry target
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 44038
2015-01-18 16:47:50 +00:00
Luka Perkov
64653e6373 uboot-envtools: fix Linksys EA3500 env size
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 44037
2015-01-18 16:45:11 +00:00
Zoltan Herpai
d41d7cc199 packages: update uboot-sunxi to 2015.01
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44035
2015-01-18 16:42:42 +00:00
Zoltan Herpai
2513eb6c19 uboot-sunxi: fix bananapro target, update patch
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43921
2015-01-10 19:12:35 +00:00
Zoltan Herpai
157e1da749 uboot-sunxi: various updates - use mainline uboot-sunxi version (2015.01-rc3) - add support for Bananapro
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43899
2015-01-09 19:19:35 +00:00
Luka Perkov
180c1f3302 uboot-envtools: add more kirkwood boards
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 43747
2014-12-18 15:53:46 +00:00
John Crispin
f8e83b1057 uboot-envtools: enable UBI support per default on oxnas
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43716
2014-12-15 10:37:09 +00:00
John Crispin
5ff8272cf0 uboot-oxnas: install u-boot.bin also to KERNEL_BUILD_DIR
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43662
2014-12-12 16:16:45 +00:00
John Crispin
f76755da3f packages: fix typo in OpenWrt name
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 43542
2014-12-07 16:53:30 +00:00
John Crispin
6ad5109211 uboot-envtools: use environment stored in UBI also for KD20
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43510
2014-12-03 16:05:23 +00:00
John Crispin
871e0a6316 uboot-oxnas: adjust digtial drive strength of IC+ phy
This is what the vendor bootloader does on KD20.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43509
2014-12-03 16:05:17 +00:00
John Crispin
60edf49f7b uboot-oxnas: re-add IC+ phy driver
KD20 got an IC+ phy, without the driver the phy is not properly
initialized resulting in ethernet not working unless being already
initialized by the vendor loader.

upstream commit 368b4d2b49bbbf379d9334747fbbd2aaaafe4356
drivers: net: remove dead drivers
removed icplus.c due to the lack of in-tree users.
Partially revert that commit adding back the IC+ driver.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43508
2014-12-03 16:05:11 +00:00
John Crispin
283d7789ee uboot-oxnas: bump to U-Boot 2014.10
A few trivial changes were needed to adapt to upstream framework changes.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43499
2014-12-02 15:25:37 +00:00
Luka Perkov
c595a59680 uboot-kirkwood: bump to 2014.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43436
2014-11-30 03:55:44 +00:00
Luka Perkov
c25e55d851 uboot-envtools: bump to 2014.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43433
2014-11-30 01:14:17 +00:00
Luka Perkov
44d5800fe1 uboot-*: update license info in uboot packages
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43429
2014-11-29 23:45:53 +00:00
John Crispin
a91b2eb5f4 uboot-omap: add C4 revision in findfdt
fixes BeagleBoard C4 detection

error message in serial console was:
"WARNING: Could not determine device tree to use"

change is found in upstream u-boot

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 43392
2014-11-26 09:00:56 +00:00
John Crispin
de49133a8b uboot-envtools: add support for oxnas target
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43390
2014-11-26 09:00:40 +00:00
John Crispin
c05048b0bb add uboot-oxnas
This adds support for the oxnas target in U-Boot 2014.04
History can be found at https://github.com/kref/u-boot-oxnas up to 2013.10
changes from 2013.10 to 2014.04 can be followed at
https://gitorious.org/openwrt-oxnas

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43389
2014-11-26 09:00:17 +00:00
John Crispin
d265ebd1dc uboot-envtools: add carambola2 support
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 43317
2014-11-19 13:49:54 +00:00
John Crispin
7dce745a99 package/uboot-envtools: add OpenMesh MR900v2 support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43269
2014-11-14 16:55:26 +00:00
John Crispin
c126266f43 package/uboot-envtools: add OpenMesh MR900 support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43263
2014-11-14 16:54:45 +00:00
Luka Perkov
4f1a9470f0 kirkwood: add support for Linksys EA3500
http://wiki.openwrt.org/toh/linksys/ea3500

Signed-off-by: Dan Walters <dan@walters.io>

SVN-Revision: 43230
2014-11-10 23:55:10 +00:00
Nicolas Thill
8db5c4038d uboot-sunxi: add support for Olimex A20-OLinuXino-LIME
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 43188
2014-11-06 00:05:15 +00:00
Nicolas Thill
e39e1ba005 uboot-sunxi: cosmetic changes
This will ease adding new targets and updating:
 * split UBOOTS var into multiple lines
 * remove version from TITLE

Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 43187
2014-11-06 00:05:10 +00:00
John Crispin
74a3a77bcd license info - revert r43155
turns out that r43155 adds duplicate info.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43167
2014-11-03 09:56:44 +00:00
John Crispin
c10d97484a Add more license tags with SPDX identifiers
Note, that licensing stuff is a nightmare: many packages does not clearly
state their licenses, and often multiple source files are simply copied
together - each with different licensing information in the file headers.

I tried hard to ensure, that the license information extracted into the OpenWRT's
makefiles fit the "spirit" of the packages, e.g. such small packages which
come without a dedicated source archive "inherites" the OpenWRT's own license
in my opinion.

However, I can not garantee that I always picked the correct information
and/or did not miss license information.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43155
2014-11-03 08:01:08 +00:00
John Crispin
24a0269b71 ar71xx: qihoo-c301: reset imageNtrynum after each successful boot.
Qihoo C301 has 2 flash chips of which one is used as primary and the
other is used as backup.  OEM U-Boot will try to boot an activeregion N
with imageNstatus=0 and imageNtrynum <= imagemaxtry.  If such a region
is found, bootloader will try to increment imageNtrynum and boot it.

This patch tries to reset imageNtrynum after each successful boot (if
the boot process reaches the execution of /etc/init.d/done).

	root@OpenWrt:/# hexdump -C -n 128 /dev/mtdblock9
	00000000  9e f3 63 91 61 63 74 69  76 65 72 65 67 69 6f 6e  |..c.activeregion|
	00000010  3d 31 00 69 6d 61 67 65  31 73 74 61 74 75 73 3d  |=1.image1status=|
	00000020  30 00 69 6d 61 67 65 32  73 74 61 74 75 73 3d 30  |0.image2status=0|
	00000030  00 69 6d 61 67 65 32 74  72 79 6e 75 6d 3d 30 00  |.image2trynum=0.|
	00000040  69 6d 61 67 65 6d 61 78  74 72 79 3d 33 00 69 6d  |imagemaxtry=3.im|
	00000050  61 67 65 31 74 72 79 6e  75 6d 3d 30 00 00 00 00  |age1trynum=0....|
	00000060  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42914
2014-10-14 12:21:36 +00:00
Zoltan Herpai
4e4be0bfa1 uboot-sunxi: add support for Olimex A13 SOM
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42692
2014-09-28 23:20:36 +00:00
Zoltan Herpai
b595d02fa7 uboot-sunxi: add patch to fix gmac reliability issue on bananapi
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42691
2014-09-28 20:39:04 +00:00
Zoltan Herpai
0a57901ceb uboot-sunxi: add PSCI support for bringing up secondary core on A20
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42587
2014-09-17 08:25:04 +00:00
Zoltan Herpai
14cf28b284 uboot-sunxi: bump to 2014.04
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 42422
2014-09-06 15:18:40 +00:00
Luka Perkov
ead1765057 uboot-kirkwood: bump to 2014.07
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42080
2014-08-08 15:55:03 +00:00
Luka Perkov
61d83b3a2f uboot-envtools: bump to 2014.07
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42078
2014-08-08 15:14:26 +00:00
Zoltan Herpai
697f609fc8 uboot-mxs: bump u-boot to 2014.07
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 41946
2014-08-02 11:17:17 +00:00
John Crispin
c890f71b95 package:grub2: fix build error on linux missing libzfs
configure enables libzfs support on default.
This will break the build, on systems without libzfs.

Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>

SVN-Revision: 41935
2014-08-01 11:19:46 +00:00
John Crispin
596ff29ade package/uboot-envtools: add OpenMesh OM5P support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 41774
2014-07-20 17:31:00 +00:00
John Crispin
9cf5fbfaf0 lantiq: re-add 0041-lzma-fixup.patch to uboot
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41671
2014-07-16 10:43:44 +00:00
Gabor Juhos
f6a334c6c1 package/uboot-envtools: add support for the EnGenius EAP300 v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41660
2014-07-14 21:30:29 +00:00
Gabor Juhos
ddd5a9a8f2 package/uboot-envtools: add support for the Tube2H board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41651
2014-07-14 16:03:36 +00:00
John Crispin
1475263d5c lantiq: configure uboot-envtools on BTHOMEHUBV2B and make it work correctly on other lantiq boards
Generate the configuration file for uboot-envtools
on BTHOMEHUBV2B. Adds the specific parameters for the
BTHOMEHUBV2B and also fixes an incorrect path which
would have affected other lantiq boards as well
(currently only the GIGASX76X).

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41597
2014-07-13 07:17:54 +00:00
Felix Fietkau
a68ae1a701 rbcfg: fix format string bug
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>

SVN-Revision: 41410
2014-06-30 08:19:44 +00:00
Imre Kaloz
a91b9e35a4 add mvebu support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41380
2014-06-29 12:38:35 +00:00
Luka Perkov
e575c759ca uboot-envtools: use new scripts from /lib/ to match boards
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41340
2014-06-26 10:14:14 +00:00
John Crispin
8a82c2cd36 uboot-envtools: fix build if ubi volume support is disabled
Insert a missing #ifdef UBI around the use of libubi_close().
As the preceding if (libubi) will never be true on non-UBI builds,
compiling only failed when disabling optimization.

Also rebase patch to latest u-boot.git HEAD.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 41313
2014-06-24 18:12:56 +00:00
John Crispin
1a6a14c757 package/uboot-envtools: add OpenMesh OM2P-HSv2 support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 40965
2014-06-02 13:21:47 +00:00
John Crispin
f777b06875 package/uboot-envtools: add OpenMesh OM2Pv2 support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 40959
2014-06-02 13:21:17 +00:00
John Crispin
dab35f044a uboot-envtools: add support for environment in ubi volume
On UBI enabled devices, U-Boot might store it's environment on
UBI volume(s). Support this in uboot-envtools, so fw_setenv and
fw_printenv can work on these platforms.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 40929
2014-06-02 12:44:19 +00:00
John Crispin
07fde034b0 lantiq: Add ARV7510PW22 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40918
2014-06-02 12:43:31 +00:00
Zoltan Herpai
d00f7b05c8 uboot-sunxi: add bananapi support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40899
2014-06-01 18:47:14 +00:00
Luka Perkov
591b5285f5 uboot-envtools: add support for kirkwood ea4500
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40872
2014-05-28 21:43:42 +00:00
Luka Perkov
2381f4a7b0 uboot-envtools: add Pogoplug E02 support
The settings require that the OpenWrt provided u-boot is used as either
first or second stage bootloader as it modifies the partitioning scheme
to move the u-boot environment to a separate mtd partition.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 40829
2014-05-23 08:17:02 +00:00
Luka Perkov
d3fc4fbd74 uboot-kirkwood: re-add Pogoplug E02 support
This patch modifies the u-boot config for the Pogoplug E02 to work with
OpenWrt. It also enables building a second stage bootloader image.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 40828
2014-05-23 08:17:01 +00:00
Luka Perkov
b10140d832 uboot-imx6: update to 2014.04
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40805
2014-05-20 21:01:18 +00:00
Luka Perkov
44c890b6f1 uboot-kirkwood: update to 2014.04
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40804
2014-05-20 12:45:02 +00:00
Luka Perkov
15ff368d5f uboot-lantiq: remove duplicate define
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40779
2014-05-19 18:55:55 +00:00
Luka Perkov
740ed0ede4 uboot-envtools: update to 2014.04
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40778
2014-05-19 16:41:24 +00:00
Florian Fainelli
427536bc53 apex: change Source URL for Apex package
As both of the PKG_SOURCE_URLs within the Apex Makefile appear to be no
longer functional, this patch changes the source URL to the OpenWRT
downloads page. Apologies for resubmitting, but there was a syntax error
in the previous patch ( http://patchwork.openwrt.org/patch/5025 ).

Signed-off-by: Riley Baird <orthogonal@librewrt.org>
[florian: unmangle patch, fix subject]
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 40718
2014-05-07 01:28:52 +00:00
Zoltan Herpai
af3a3f8a9a uboot-sunxi: update pcDuino3 config - beef up memory clock to 480 - fix network config
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40714
2014-05-06 20:22:45 +00:00
Zoltan Herpai
9ee3edb4ca uboot-sunxi: add support for LinkSprite pcDuino v3 (a20)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40605
2014-04-30 19:37:56 +00:00
John Crispin
a5cae0521e Add Zyxel P-2812HNU-Fx images
P-2812HNU-Fx images are already supported but not generated.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40548
2014-04-22 08:08:27 +00:00
John Crispin
a57ffc09a7 Add Fritz!Box 3370 images
Fritz!Box 3370 images are already supported but not generated.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40547
2014-04-22 08:08:23 +00:00
John Crispin
03a777c293 Refresh patches
Refresh uboot-lantiq patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40546
2014-04-22 08:08:19 +00:00
John Crispin
686a17e647 Create firmware directory if it doesn't exist
Fixes package refreshing.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40545
2014-04-22 08:08:15 +00:00
John Crispin
616f6da588 Depend on lantiq board
Depend on lantiq board.

ARV7510 depends on ARV4510 because (according to OpenWrt wiki) both boards are identical except for the unsupported WiFi. Moreover, ARV7510 isn't especifically supported and ARV4510 images valid.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40544
2014-04-22 08:08:10 +00:00
Luka Perkov
350dd0f9ac kobs-ng: Add support for overriding size
By default kobs-ng will use the size of /dev/mtd0 for the IMX bootstreams.
This patch allows overriding that size in order to reserve space at the end
of the mtd partition for u-boot.img in the case of using an SPL bootloader.

For example, to flash an SPL bootloader that loads u-boot.img from 0xe0000
(14MB) offset in a 16MB /dev/mtd0:

  kobs-ng init -v -x --search_exponent=1 --chip_0_size=0xe00000 SPL
  nandwrite --start=0xe00000 --pad /dev/mtd0 u-boot.img

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40532
2014-04-19 21:39:09 +00:00
John Crispin
13010f3adc lantiq: remove uboot lzma patch, apparently its not needed after all
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40521
2014-04-16 12:11:24 +00:00
John Crispin
69bac3e37e uboot-lantiq: backport lzma fix
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40520
2014-04-16 12:01:24 +00:00
Gabor Juhos
daca4351b1 uboot-envtools: add support for the ZyXEL NBG6716 board
Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40501
2014-04-13 08:29:08 +00:00
John Crispin
3269f57c58 uboot-lantiq: enable parallel building
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40488
2014-04-12 21:21:40 +00:00
John Crispin
dcbaee4e77 uboot-lantiq: reuse/copy VR9 GPHY firmware blobs from target/linux/lantiq
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40487
2014-04-12 21:21:35 +00:00
John Crispin
28fcb00b44 uboot-lantiq: add packages for AudioCodes MP-252
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40486
2014-04-12 21:21:31 +00:00
John Crispin
dcf6f0e3f8 uboot-lantiq: add packages for various Arcadyan boards
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40485
2014-04-12 21:21:26 +00:00
John Crispin
b949a631fe uboot-lantiq: add packages for Lantiq EASY80920
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40484
2014-04-12 21:21:23 +00:00
John Crispin
de21f63d4a uboot-lantiq: add packages for Lantiq EASY50712
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40483
2014-04-12 21:21:18 +00:00
John Crispin
1246dce0b3 uboot-lantiq: update to v2013.10
Patches created from tree:
git@github.com:danielschwierzeck/u-boot-lantiq.git
v2013.10..u-boot-lantiq-v2013.10-openwrt4

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40482
2014-04-12 21:21:14 +00:00
Felix Fietkau
a558ce7e21 grub2: disable mkfont - fix build on Archlinux
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 40350
2014-03-30 19:55:43 +00:00
Felix Fietkau
fa4d4a62bf grub2: disable libdevmapper - fix build when it's available
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 40349
2014-03-30 19:55:39 +00:00
Felix Fietkau
fbda3388f9 uboot-envtools: fix build with musl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39961
2014-03-20 13:51:27 +00:00
Felix Fietkau
24095302aa grub2: update to 2.02-beta2, fixes mac os x 10.9 support (and many other things)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39889
2014-03-12 11:21:16 +00:00
Zoltan Herpai
6892ed8193 uboot-sunxi: bump u-boot version - update u-boot to 2014.01-rc1 - smp support on a20
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>

SVN-Revision: 39779
2014-03-05 23:16:18 +00:00
Hauke Mehrtens
9a2493a004 kexec-tools: disable lzma support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39652
2014-02-21 20:06:41 +00:00
Nicolas Thill
ece85d2d25 uboot-envtools: pass target cflags
SVN-Revision: 39629
2014-02-18 22:11:24 +00:00
Luka Perkov
ddcd83e3df uboot-kirkwood: add support for Seagate GoFlexNet
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39594
2014-02-16 00:14:26 +00:00
Luka Perkov
777e7c3ff5 uboot-kirkwood: update to 2013.10
Tested on:

 * Cloud Engines Pogoplug E02
 * RaidSonic ICY BOX IB-NAS62x0
 * Iomega Iconnect

Some users are avoiding to replace their bootloader, because of that add
support for second stage u-boot image. Having ubifs capable bootloader is
required in order to boot current OpenWrt trunk.

Sample ib62x0 commands for running second stage bootloader:

tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img
bootm 0x800000

Sample ib62x0 commands for flashing second stage bootloader:

tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img
nand erase 0x100000 0x100000 ; nand write 0x800000 0x100000 0x${filesize}
nand read 0x800000 0x100000 0x100000 ; bootm 0x800000

While at it include parallel build support, use alphabetic order of the boards
and introduce common OpenWrt configuration.

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by (on ib62x0): Luka Perkov <luka@openwrt.org>
Tested-by (on dockstar): Alexander Couzens <lynxis@fe80.eu>
Tested-by (on iconnect): Wojciech Dubowik <wojciech.dubowik@neratec.com>
CC: Felix Kaechele <heffer@fedoraproject.org>
CC: Wojciech Dubowik <wojciech.dubowik@neratec.com>
CC: Alexander Couzens <lynxis@fe80.eu>
CC: Daniel Engberg <daniel.engberg@pyret.net>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39590
2014-02-15 23:53:07 +00:00
Zoltan Herpai
66543935db uboot-sunxi: various fixes - update A10-Lime support - fix MMC on sun5i with initializing PLL6 correctly
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39470
2014-02-05 08:39:38 +00:00
Zoltan Herpai
16cbe62e9c sunxi: boot changes - Added uEnv.txt to facilitate automatic boot. - Cosmetic fix in u-boot Makefile - Don't force command line arguments
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39438
2014-01-31 15:53:53 +00:00
Luka Perkov
ad48ba11db uboot-envtools: add support for wndr3700
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39380
2014-01-24 00:07:48 +00:00
John Crispin
9e39cd9503 kexec: bump to latest head revision
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39305
2014-01-17 13:57:25 +00:00
Zoltan Herpai
01a2ff6925 uboot-sunxi: - add support for Cubietruck - cosmetic change: have the options listed alphabetically
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39261
2014-01-12 19:16:35 +00:00
Zoltan Herpai
f8911b3197 uboot-sunxi: add support for Olinuxino A10 LIME
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39221
2014-01-11 17:17:17 +00:00
Imre Kaloz
7aaa9bc91c add x86_64 target support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39208
2014-01-07 12:23:35 +00:00
Zoltan Herpai
c2f62ecc25 add support for pcDuino board
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39192
2014-01-04 10:09:52 +00:00
Zoltan Herpai
4800b2c723 update version
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39191
2014-01-04 10:08:31 +00:00
Imre Kaloz
1eff212ce8 fix jffs2 with internal libgcc and switch omap4 to ext4
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39044
2013-12-13 16:38:43 +00:00
Imre Kaloz
f6b57149af FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38943
2013-11-29 10:59:51 +00:00
Imre Kaloz
4c3f2ed4ca hide package, it's needed all the time
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38924
2013-11-26 18:46:47 +00:00
Imre Kaloz
3b2c74e5db use plain image names inside the target directories
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38923
2013-11-26 18:45:51 +00:00
Zoltan Herpai
17089f3f37 package: uboot-mxs: cosmetic fix
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38875
2013-11-20 10:15:02 +00:00
Zoltan Herpai
5fa0e4fac0 uboot-sunxi: add U-boot builds for a couple sunxi boards
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38785
2013-11-13 10:49:22 +00:00
Zoltan Herpai
65f747a42d mxs: - update uboot-mxs to 3.10 - enable building uboot for imx23 along sbImage by default - (doc updated)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38781
2013-11-12 14:39:32 +00:00
Zoltan Herpai
dcd8a08be1 uboot-envtools: add support for mxs target
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 38776
2013-11-12 10:07:03 +00:00
Zoltan Herpai
b0b78d541d mxs: rename uboot-imx23 to uboot-mxs
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38774
2013-11-12 01:34:30 +00:00
Imre Kaloz
1381fa6c5c rename the omap4 target to omap
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38691
2013-11-08 12:37:39 +00:00
Imre Kaloz
b27b8b5bdd use a single package to build MLO/u-boot for all omap boards
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38626
2013-10-31 10:57:46 +00:00
Luka Perkov
ed676cf0ff uboot-imx6: update to 2013.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38625
2013-10-31 00:00:51 +00:00
Gabor Juhos
6b604495a4 uboot-ar71xx: make it depend on the generic ar71xx subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38599
2013-10-30 06:54:56 +00:00
Felix Fietkau
e31ccd95c7 u-boot: prefer mirror2.openwrt.org over ftp.denx.de - the denx ftp is slow and unreliable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38559
2013-10-28 15:15:05 +00:00
Luka Perkov
494bc1d026 uboot-envtools: update to 2013.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38444
2013-10-18 00:39:28 +00:00
Luka Perkov
c15bec4a1b uboot-envtools: update kirkwood scripts
Also, scripts can be installed as data so let's change that here too.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38403
2013-10-14 19:46:43 +00:00
Zoltan Herpai
07043a853a imx23: rename imx23 to mxs for upcoming imx23/28 support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38394
2013-10-14 19:01:23 +00:00
Luka Perkov
3e5da21b15 uboot-imx6: fix typo in nitrogen6dlXg
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38205
2013-09-26 09:03:47 +00:00
Luka Perkov
64e10a637d uboot-imx6: add support for Nitrogen6x boards
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>

SVN-Revision: 38204
2013-09-26 08:36:12 +00:00
Luka Perkov
4409e1c1ae uboot-imx6: alphabetize wandboard variants
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>

SVN-Revision: 38203
2013-09-26 08:36:09 +00:00
Luka Perkov
1eb21b87bd kobs-ng: add new package
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37894
2013-09-03 23:22:16 +00:00
Luka Perkov
e29acfd8e9 uboot-imx6: update to v2013.07
Update includes upstream support for Wandboard Quad too.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37858
2013-08-29 23:06:31 +00:00
Luka Perkov
cdd6361649 uboot-envtools: update to v2013.07
SVN-Revision: 37857
2013-08-29 23:06:29 +00:00
Zoltan Herpai
928d676274 uboot-imx23: add new package for i.MX233 boards
SVN-Revision: 37822
2013-08-22 19:28:06 +00:00
Luka Perkov
32b80b8653 uboot-env: fix spurious esac within ramips uci-defaults
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 37814
2013-08-19 13:01:17 +00:00
Luka Perkov
e8d6de95b3 uboot-envtools: add support for hornet-ub-x2
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37789
2013-08-15 00:57:48 +00:00
Luka Perkov
af9d30f713 uboot-env: add config for the ALFA NETWORKS Hornet-UB (AP121U)
Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

SVN-Revision: 37382
2013-07-17 17:31:21 +00:00
Luka Perkov
2b6519b8c2 uboot-envtools: add support for imx6 target
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37136
2013-07-02 23:08:19 +00:00
Luka Perkov
d352ff6cac uboot-envtools: upgrade to 2013.07-rc1
Support for writing on MMC devices has been added.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37135
2013-07-02 23:08:17 +00:00
Felix Fietkau
512a3c5d81 kexec-tools: reduce size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37072
2013-06-28 11:27:16 +00:00
Felix Fietkau
ea5f9a7ba7 kexec-tools: make zlib support optional, but enabled by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37071
2013-06-28 11:27:13 +00:00
Zoltan Herpai
82ae24602a tools: add tools for i.MX23 boards
SVN-Revision: 37035
2013-06-26 10:15:29 +00:00
John Crispin
4ebf19b48f packages: clean up the package folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37007
2013-06-21 16:54:37 +00:00
Luka Perkov
5fbc56cfdc uboot-imx6: add new package
SVN-Revision: 36754
2013-05-29 01:27:30 +00:00
Luka Perkov
3b1c133d1d uboot-envtools: upgrade to 2013.04
SVN-Revision: 36665
2013-05-20 08:52:44 +00:00
John Crispin
d48ad63b9d grub2: Add sub package grub-editenv for target installation
grub-editenv allows to modify grub2 environment files. Add a new package
that build grub2 for the target and packs up grub-editenv.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 36574
2013-05-07 12:35:07 +00:00
Luka Perkov
b591e15f36 This adds Gateworks Laguna family board support. Note that some Laguna boards have SPI flash and others have NOR flash, thus the size/erasesize are detected dynamically.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 36313
2013-04-11 16:04:31 +00:00
Luka Perkov
fe24afe37f uboot-envtools: upgrade to version 2013.01.01
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 36033
2013-03-15 01:36:53 +00:00
Luka Perkov
6337803d65 uboot-env: wzr-600dhp uses wzr-hp-ag300h name
SVN-Revision: 35866
2013-03-03 21:59:35 +00:00
Luka Perkov
107e0c6d1f ar71xx: add support for Buffalo WZR 600DHP
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 35840
2013-03-01 13:46:01 +00:00
Gabor Juhos
b01e744632 uboot-envtools: add config for the Edimax BR-6425 board
Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35464
2013-02-02 17:01:52 +00:00
Gabor Juhos
a2a5f9b405 package/uboot-envtools: add OpenMesh MR600v2 support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35432
2013-02-01 15:50:52 +00:00
Luka Perkov
2245726371 uboot-lantiq: upgrade to 2013.01
SVN-Revision: 35292
2013-01-22 12:55:01 +00:00
Mirko Vogt
d73104d680 fix typo in Makefile
Thanks to Stefan Hellermann for pointing this out!

SVN-Revision: 35042
2013-01-07 17:11:15 +00:00
Mirko Vogt
12a6622bd9 This patch updates uboot-xburst from 2009.11 to 2012.10-rc2 - Ingenic SoC support went upstream
Summary:
* remove all files/* (since merged to upstream)
* patches on nand-spl, mmc and lcd driver

Thanks a lot to Xiangfu Liu!

Signed-off-by: Xiangfu Liu <xiangfu@sharism.cc>

SVN-Revision: 35034
2013-01-07 14:10:01 +00:00
John Crispin
240a3a38e1 fixes uboot dependency
SVN-Revision: 34686
2012-12-15 01:59:35 +00:00
Luka Perkov
769c322cd0 uboot-kirkwood: build in $(BUILD_DIR)
SVN-Revision: 34401
2012-11-29 01:04:37 +00:00
Jo-Philipp Wich
78cec2cfca grub2: fix another case of gnulib failing under gnu libc
SVN-Revision: 34389
2012-11-26 16:03:40 +00:00
Florian Fainelli
49cfa54509 grub2: accept the linux-musl* tuple
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34306
2012-11-23 20:01:53 +00:00
Luka Perkov
6db1b986ed uboot-lantiq: add new package
SVN-Revision: 34305
2012-11-23 18:16:05 +00:00
Luka Perkov
702f2590ea uboot-kirkwood: update to 2012.10
SVN-Revision: 34303
2012-11-22 21:16:04 +00:00
Gabor Juhos
21393323d0 package/uboot-envtools: add OpenMesh MR600 support
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34236
2012-11-18 09:32:40 +00:00
Gabor Juhos
5a6a2e55b9 package/uboot-envtools: add CAP4200AG support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33959
2012-10-27 08:55:41 +00:00
John Crispin
788a5816ad move to boot/ folder
SVN-Revision: 33824
2012-10-17 21:53:23 +00:00
Gabor Juhos
6e6e72470d uboot-envtools: OM2P-HS partition information
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33802
2012-10-17 08:26:04 +00:00
John Crispin
e75106aa0d move boot related packages to their own folder
SVN-Revision: 33781
2012-10-16 13:44:25 +00:00