Commit graph

164 commits

Author SHA1 Message Date
Jo-Philipp Wich
94c728dc39 base-files: use "reboot -f" after sysupgrade to prevent executing deleted init scripts
SVN-Revision: 27776
2011-07-25 22:19:55 +00:00
Jo-Philipp Wich
365f76551a base-files: attempt bring up related wifi devices when calling ifup If a user invoked /sbin/ifup to bring up an interface, the setup used to fail in case of wireless networks tied to a non-bridged interface definition. Likewise, the bringup of "lan" in the default configuration will reinitialize the bridge but do not re-join the wireless network to it, requiring an extra call to /sbin/wifi (which might not be possible anymore due to a severed link if connected wirelessly).
The changeset modifies the "ifup" command to search for related wireless
devices and call "wifi up" on them if applicable. This way the commands for
wireless and non-wireless interfaces are unified from a cli point of view.

The "ifup -a" case has not been changed to keep the logic of the
/etc/init.d/network boot sequence. This might be changed later.

Solves #9763.

SVN-Revision: 27720
2011-07-22 00:21:20 +00:00
Jo-Philipp Wich
0de28706ca base-files: implement a generic mechanism to map per-interface sysctls to uci. - option ipv4_xyz is mapped to /proc/sys/net/ipv4/{conf,neigh}/xyz - option ipv6_xyz is mapped to /proc/sys/net/ipv6/{conf,neigh}/xyz This allows e.g. "option ipv6_proxy_ndp 1" to enable NDP proxying on wan. Fixes ticket #8699.
SVN-Revision: 27653
2011-07-17 17:10:30 +00:00
Jo-Philipp Wich
1e34c02e3e base-files: add -h and --help options to sysupgrade (#9728)
SVN-Revision: 27630
2011-07-17 09:27:14 +00:00
Jo-Philipp Wich
e0e6d1029e base-files: use uci_toggle_state() to prevent unwanted aggregation of state vars (#9711)
SVN-Revision: 27616
2011-07-15 14:57:44 +00:00
Felix Fietkau
0a7a73261a base-files: do not use the relinked libgcc, fixes c++ exception handling issues (#9185)
SVN-Revision: 27347
2011-07-02 06:50:15 +00:00
Jo-Philipp Wich
28fbd7470d add gfortran compiler support (#9600, patch from Xiangfu Liu via Qi hardware)
SVN-Revision: 27262
2011-06-23 11:46:24 +00:00
Jo-Philipp Wich
fd8ec24187 base-files: if an ip6addr without a prefix is given, assume /128 - otherwise the busybox utilities will interpret it as /0 and create an invalid default route
SVN-Revision: 27145
2011-06-09 12:25:48 +00:00
Jo-Philipp Wich
97ee10d691 base-files: fix error reporting for unsupported protocols on virtual interfaces
SVN-Revision: 27132
2011-06-07 23:25:43 +00:00
Jo-Philipp Wich
9b8a5e604a base-files: mark /etc/crontabs/ as config directory
SVN-Revision: 26986
2011-05-24 09:27:23 +00:00
Jo-Philipp Wich
ed8f726dab ipcalc.sh CIDR notation Hi,
the attached patch makes ipcalc.sh accept IP/Netmask combinations in
CIDR notation. Before you could only do:

# sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11

with this patch you can also execute it with:

sh ipcalc.sh 192.168.0.0/24 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11

The patch is based on #1260 [1], i just changed one line to calculate
the START end END ips right. I wonder why that never got included. If
there is no reason not to do i would like to ask you to commit that
patch, because its a functionality i (and probably others) miss quite often.

Btw, i also fixed 4 useless tabs, that might look a bit strange in the
patch.

Regards, Manuel

SVN-Revision: 26930
2011-05-18 09:50:06 +00:00
Jo-Philipp Wich
ba1c1e9016 base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others (#9352)
SVN-Revision: 26848
2011-05-08 10:25:58 +00:00
Jo-Philipp Wich
144bee2090 base-files: fix stale space in eglibc library install section (#9270)
SVN-Revision: 26720
2011-04-19 13:18:39 +00:00
Jo-Philipp Wich
2f6361832e base-files: return success on lib-copying with external toolchain when using an external toolchain the base-files package copies libc, libgcc and others from the library directory.
The file list is given as following in the .config:
CONFIG_LIBC_FILE_SPEC="./lib/ld{-*.so,-linux*.so.*} ./lib/lib{anl,c,cidn,crypt,dl,m,nsl,nss_dns,nss_files,resolv,util}{-*.so,.so.*}"

Because the filenames are composed with different endings, not all files exist
and will be skipped. Currently, this works only if the last composed file
(util.so.*) really exists. At the moment this works - but only if you don't add
a new file like 'uClibc'.

Adding it at the end '...resolv,util,uClibc}{-*.so,.so.*}' will lead to this
message, because the combination 'libuClibc.so.*' doesn't exist and Make will
evaluate the last copy statement of the for loop.
2011-04-12 20:37:43 +00:00
Jo-Philipp Wich
fe8b9d5232 base-files: properly handle vlans on top of wireless interfaces
SVN-Revision: 26230
2011-03-18 18:24:51 +00:00
Jo-Philipp Wich
629e73938e base-files: update sysctl.conf for modern kernels
SVN-Revision: 26204
2011-03-17 15:35:41 +00:00
Felix Fietkau
4bcca969dc base-files: link libpthread against libc
SVN-Revision: 26161
2011-03-14 19:27:45 +00:00
Felix Fietkau
e8491ab2a5 base-files: make library relinking uclibc specific and fix libpthread installation for the non-relinked variant
SVN-Revision: 26003
2011-03-10 12:27:46 +00:00
Felix Fietkau
32d8fac477 base-files: only relink libraries if the linaro toolchain is selected
SVN-Revision: 25983
2011-03-09 20:36:29 +00:00
Felix Fietkau
e52b720870 gcc: move the optimized assembler helpers back into the static libgcc and skip relinking for this arch. due to relocation constraints, the assembler functions cannot be in the shared libgcc and must always be linked in statically
SVN-Revision: 25952
2011-03-08 13:10:11 +00:00
Felix Fietkau
357018e7e5 base-files: the relinked libpthread needs to be linked against libdl, otherwise calls to dlopen() fail (fixes #8978)
SVN-Revision: 25950
2011-03-08 12:48:36 +00:00
Felix Fietkau
0b9cfab2a2 base-files: fix Build/Compile override handling, fixes ar7 compile
SVN-Revision: 25911
2011-03-06 22:36:42 +00:00
Felix Fietkau
4e155b5283 base-files: do not build or use libgcc on m68k and avr32
SVN-Revision: 25852
2011-03-03 14:50:00 +00:00
Felix Fietkau
1cc0bcfffc base-files: relink uclibc and libgcc libraries to remove leftovers of the statically linked initial libgcc saves a few kb and gets rid of unused not exported functions as well should also improve the reliability of mklibs
SVN-Revision: 25800
2011-03-01 05:40:38 +00:00
Hamish Guthrie
090c042089 base-files: Add /etc/nsswitch.conf to targets running glibc/eglibc, otherwise name resolution fails
SVN-Revision: 25568
2011-02-18 10:37:26 +00:00
Felix Fietkau
e5e6dfe384 base-files: librt should depend on libpthread, not the other way around
In uClibc 0.9.32 as well as recent versions of glibc and eglibc, librt
depends on libpthread.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 25548
2011-02-16 02:42:24 +00:00
Felix Fietkau
c672eeffc9 remove the shared object stubs of libnsl and libresolv - let the compiler use the static variants instead
SVN-Revision: 25511
2011-02-13 03:26:10 +00:00
Jo-Philipp Wich
875ff44592 base-files: - properly disable IPv6 on bridge ports - introduce accept_ra option, defaults to true for dhcp interfaces, false for others - introduce send_rs option, defaults to true for static interfaces, false for others
SVN-Revision: 25454
2011-02-11 00:39:11 +00:00
Jo-Philipp Wich
b33ce3109d base-files: remove remaining conffiles reference to /etc/banner
SVN-Revision: 25368
2011-02-04 23:05:12 +00:00
Gabor Juhos
25feec0c9c package/base-files: add get_magic_long() to common upgrade script
Patch-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 25117
2011-01-26 20:35:37 +00:00
Daniel Dickinson
f93b6cb844 base-files: Fix typo in option name for disabling failsafe announcment Thanks to Andrey Zholos for this patch
SVN-Revision: 25040
2011-01-18 14:46:25 +00:00
Jo-Philipp Wich
3b6851aa82 base-files: implement "reqopts" parameter for dhcp interfaces to specify additional dhcp options to request
SVN-Revision: 24780
2010-12-22 07:20:24 +00:00
Gabor Juhos
63c786dde7 base-files: add support for the usbdev LED trigger
SVN-Revision: 24647
2010-12-17 17:10:14 +00:00
Florian Fainelli
ebe7bdba88 adds a --help option to /sbin/wifi
Signed-off-by: Sebastian Philipp <sebastian@spawnhost.de>

SVN-Revision: 24258
2010-12-05 11:22:56 +00:00
Jo-Philipp Wich
d0ab35c115 base-file: add metric option for static and dhcp protos, this simplifies the management of multiple default routes
SVN-Revision: 24020
2010-11-17 19:11:50 +00:00
Jo-Philipp Wich
59a3841c9c base-files: mark libc as hold and essential, opkg should now bail out if someone tries to uninstall libc
SVN-Revision: 23960
2010-11-11 16:18:58 +00:00
Jo-Philipp Wich
cfe4db7bda base-files: mark /etc/shadow as conffile
SVN-Revision: 23590
2010-10-23 15:49:04 +00:00
Jo-Philipp Wich
d856ed78ad base-files: add udhcpc vendorid option (#7744)
SVN-Revision: 23279
2010-10-06 21:21:28 +00:00
Jo-Philipp Wich
8dc04c9018 base-files: mark /etc/sysupgrade.conf as conffile
SVN-Revision: 23264
2010-10-05 22:08:23 +00:00
Jo-Philipp Wich
d80f82d7a4 base-files: - add sysupgrade support for keepfile hints * introduces /lib/upgrade/keep.d/ for per-package keepfile lists * introduces /etc/sysupgrade.conf for user defined keepfile hints - prime /lib/upgrade/keep.d/base-files-essential to keep sysupgrade usable for images without opkg - change sysupgrade to build the keepfile list from /lib/upgrade/keep.d/, /etc/sysupgrade.conf and opkg list-changed-conffiles
SVN-Revision: 23258
2010-10-05 19:24:12 +00:00
Jo-Philipp Wich
978ecae685 base-files: sysupgrade: merge info from "opkg list-changed-conffiles" to backup file list
SVN-Revision: 23233
2010-10-05 07:40:25 +00:00
Jo-Philipp Wich
a65975e0d6 base-files: mark /etc/rc.local as conffile
SVN-Revision: 23232
2010-10-05 07:32:37 +00:00
Jo-Philipp Wich
0fda5f7507 base-files: utilize uci_get_state to read the previous dhcp router address in udhcpc default script. The setup_switch() procedure provided by swconfig calls config_load() during network restart and thus confuses udhcpc's uci state keeping resulting in a missing default route on each second network restart. Bypass the cached state vars and query uci directly to make the script immune against unwanted runtime changes.
SVN-Revision: 23211
2010-10-04 00:07:07 +00:00
Jo-Philipp Wich
cdd98e3f3a base-files: bump pkg revision after r23091, r23092
SVN-Revision: 23093
2010-09-19 15:14:42 +00:00
Jo-Philipp Wich
4815de3f26 base-files: introduce service_kill() into functions.sh - a convenience wrapper for killing services by pid or pidfile with a grace period for termination before kill
SVN-Revision: 23087
2010-09-19 14:03:32 +00:00
Jo-Philipp Wich
91118a9500 base-files: add an experimental "-c" flag which tries to preserve *all* changed files in /overlay/etc minus some system files
SVN-Revision: 22977
2010-09-07 22:20:26 +00:00
Jo-Philipp Wich
5949f33b06 base-files: make build dependant on opkg/host
SVN-Revision: 22948
2010-09-06 02:13:19 +00:00
Felix Fietkau
62c1740676 toolchain: fix the sysroot mess by getting rid of $(TOOLCHAIN_DIR)/usr and moving it back to $(TOOLCHAIN_DIR), this change makes the toolchain relocatable again, which should fix the SDK
SVN-Revision: 22723
2010-08-19 12:49:51 +00:00
Jo-Philipp Wich
63991ba875 base-files, uci: properly revert list state on config_load This fixes a bug where lists end up with duplicate values if config_load was invoked multiple times.
SVN-Revision: 22629
2010-08-14 00:45:15 +00:00
Jo-Philipp Wich
e1a654dd9f base-files: unconditionally unlock the rootfs_data partition (#7437)
SVN-Revision: 22377
2010-07-24 15:47:15 +00:00