Commit graph

9690 commits

Author SHA1 Message Date
John Crispin
80a54ef804 fstools: update to latest git HEAD
this adds support for overlayfs v23

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42890
2014-10-13 19:41:16 +00:00
Felix Fietkau
4c490c79b2 procd: fix initial nand sysupgrade
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42884
2014-10-12 15:50:15 +00:00
Felix Fietkau
41363b1ecb procd: fix parsing of the has_env parameter
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42883
2014-10-12 15:50:01 +00:00
Felix Fietkau
2e9157a866 mac80211: remove NO-IR from channel 36-48
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42882
2014-10-12 15:49:38 +00:00
Steven Barth
9106cc0af9 netifd: Make mtu configurable of dynamic 6rd tunnel interface
Patch allows to configure the mtu of the dynamic 6rd tunnel interface when created by dhcp script.
In some setups it's desirable to have config control over the 6rd tunnel mtu to maximize the traffic throughput

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 42871
2014-10-12 12:27:21 +00:00
Steven Barth
1db4cb9c92 odhcp6c: fix parse errors with some dhcpv6 servers
SVN-Revision: 42869
2014-10-12 12:18:33 +00:00
John Crispin
51a5ff0947 comgt: add ncm proto support
This will not work for all board/dongle combinations until we hit 3.17.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 42866
2014-10-10 08:56:33 +00:00
Felix Fietkau
fbe1b7ecdf mac80211: remove error from detect script
Signed-off-by: Michel Stam <m.stam@fugro.nl>

SVN-Revision: 42861
2014-10-09 09:04:24 +00:00
Steven Barth
aad6cb99cf ppp: add unconditional autoipv6-trigger
SVN-Revision: 42860
2014-10-09 07:38:25 +00:00
Steven Barth
3f700643fa ppp: remove ugly ipv6-workaround
This is not needed after all:

Omitting option ipv6 or setting it to 'auto' will
fire up a dhcpv6 subprotocol (this was added).

Setting ipv6 to 1 will only cause the IPv6 link to
be brought up and an accompanying dhcpv6 or static
interface with ifname @wan can be used to configure addresses.

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42859
2014-10-09 07:35:28 +00:00
Steven Barth
b2d099c11c dropbear: ensure the interface has an ip-address
Use network_get_ipaddrs_all to get all ip-addresses of an interface. If the
function fails, the interface does not exists or has not any suiteable ip
addresses assigned.

Use the returned ip-address(es) to construct the dropbear listen address.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 42857
2014-10-09 07:16:35 +00:00
Steven Barth
14e6559eee base-files: add network_get_ipaddrs_all()
Return all IPv4 and IPv6 addresses.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 42856
2014-10-09 07:16:29 +00:00
Steven Barth
c62b07b2ce ppp: allow auto-detecting and creation of ipv6 subinterface
this makes ipv6 with ppp a bit more comfortable

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42854
2014-10-08 20:37:15 +00:00
Steven Barth
ea0a01d7e2 odhcp6c: fix typo in last commit
SVN-Revision: 42852
2014-10-08 15:27:17 +00:00
Steven Barth
c7a941cf02 odhcp6c: don't assign addresses or prefixes prematurely
SVN-Revision: 42850
2014-10-08 15:16:19 +00:00
Felix Fietkau
8609ca69e0 mac80211: add a few upstream ath9k / mac80211 fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42849
2014-10-08 15:09:53 +00:00
Steven Barth
c118e5edf4 network: Unbind DHCPv6 from underlying interfaces
This allows IPv6 to set up without IPv4 being up thus
IPv6-only or IPv6+DS-Lite working with the default config.

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42848
2014-10-08 13:08:05 +00:00
Steven Barth
5fa47c3c04 odhcp6c: ensure signal-safety of signal handlers
SVN-Revision: 42841
2014-10-08 09:58:40 +00:00
John Crispin
344a304524 lldp: make use of new USERID syntax
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42839
2014-10-08 08:01:33 +00:00
John Crispin
a3bf98495a base-files: extend USERID:=syntax
it is now possible to inlie the uid and gid in the syntax

USERID:=username=uid:group=gid:group2=gid2:...

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42838
2014-10-08 08:01:28 +00:00
John Crispin
90120bb771 wwan: add a generic 3g/4g proto
this proto handler will detect which of 3g, qmi, mbim, ncm or directip you need
for a stick and setup uci automagically

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42837
2014-10-08 08:01:20 +00:00
John Crispin
1df98fcd5a comgt: split directip support into its own package
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42836
2014-10-08 08:00:55 +00:00
John Crispin
bb64826bdb uqmi: dont use proto_block_restart
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42835
2014-10-08 08:00:45 +00:00
John Crispin
e53734ddef uqmi: make the proto depend on the usb driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42834
2014-10-08 08:00:21 +00:00
John Crispin
87edc29ea1 umbim: dont use proto_block_restart
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42833
2014-10-08 08:00:17 +00:00
John Crispin
2fa06954a3 umbim: work out the ifname instead of relying on it being in uci
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42832
2014-10-08 08:00:07 +00:00
John Crispin
e28c5f86f3 procd: handle hotplug events for the usbmisc subsystem
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42831
2014-10-08 08:00:01 +00:00
John Crispin
550ded7b8a procd: r42814 added a bad git version
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42826
2014-10-06 20:27:31 +00:00
John Crispin
9f2a5ace84 procd: update to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42814
2014-10-06 20:06:41 +00:00
John Crispin
c53de497f8 ubox: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42813
2014-10-06 20:06:26 +00:00
John Crispin
635c9d7a25 fstools: update to latest git
adds support for /dev/vd* virtual io

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42812
2014-10-06 20:06:15 +00:00
Steven Barth
8691d75917 odhcp6c: add route-workaround for broken IPv6-ISPs
Some ISP seem to only do stateful DHCPv6 and not sending RAs.
This is technically broken because plain DHCPv6 doesn't carry routes.

We work around here by faking a default route to the DHCPv6 server
if we do not receive a useful RA from the ISP.

This workaround can be turned off with: option fakeroutes 0

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42803
2014-10-06 11:19:33 +00:00
Steven Barth
8243e57167 nftables: bump to 2014-09-30, disable gmp
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42802
2014-10-06 06:24:53 +00:00
John Crispin
f9cccd2c14 base-files: make postinst script run inside a subshell
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42800
2014-10-06 05:55:35 +00:00
Steven Barth
e263cd27ee libnftnl: bump to 2014-10-02
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 42799
2014-10-06 05:30:36 +00:00
John Crispin
74397a14ca iwinfo: add AR9580 with new subsystem device ID and QCA9880 with no subsystem vendor/device IDs
The AR9580 with the new ID can be found in the EnGenius ESR900 and the
QCA9880 without any subsystem IDs can be found in the EnGenius ESR1750.

Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42793
2014-10-06 04:53:04 +00:00
John Crispin
9f08790436 kernel: add rtc-ds1307 module support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42791
2014-10-06 04:52:51 +00:00
John Crispin
fcbad42acd kernel: add ledtrig-transient module support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42790
2014-10-06 04:52:44 +00:00
John Crispin
70d56d749b hostapd: read missing parameter for dynamic VLANs
In r41872 Dynamic VLAN support was reintroduced, but the vlan_naming
parameter is not read while setting up the config, so it always
defaults to 1.

Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>

SVN-Revision: 42787
2014-10-06 04:52:21 +00:00
John Crispin
7860c9707a sysupgrade: preserve symlinks in backups
Signed-off-by: Catalin Patulea <catalinp@google.com>

SVN-Revision: 42783
2014-10-06 04:51:56 +00:00
Felix Fietkau
8a450a93a5 lantiq: remove the useless ltqtapi.mk include file
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42778
2014-10-05 18:58:47 +00:00
Felix Fietkau
5121981a9e iproute2: add conflict for ip with ip-full
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42774
2014-10-05 17:13:34 +00:00
Felix Fietkau
bf0305725a hostapd: add conflicts with wpad(-mini) to hostapd and wpa_supplicant
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42772
2014-10-05 16:41:50 +00:00
Felix Fietkau
8cc9f46dfa ath10k: update firmware to the latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42768
2014-10-05 14:59:59 +00:00
Felix Fietkau
063074cf0c mac80211_hwsim: select 802.11n support for hostapd
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42766
2014-10-05 11:50:42 +00:00
Felix Fietkau
62e6e788dd relayd: update to the latest version, fixes a build error with the new gcc (#18010)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42765
2014-10-05 11:01:49 +00:00
Felix Fietkau
281f40cef2 hostapd: allow using iapp for any encryption type (fixes #18022)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42764
2014-10-05 10:55:55 +00:00
Felix Fietkau
cd80931e03 hostapd: merge an upstream patch for pmksa cache
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42762
2014-10-05 10:26:26 +00:00
Felix Fietkau
b5529ed26b iwinfo: detect AC PHY for broadcom-wl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42761
2014-10-05 10:26:17 +00:00
Felix Fietkau
dac05f6724 iwinfo: detect HT PHY for broadcom-wl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42760
2014-10-05 10:26:10 +00:00