Commit graph

17230 commits

Author SHA1 Message Date
Rafał Miłecki
7c8a36340c kernel: update bcm47xxpart failsafe partition patches
V2 using helper function was sent for upstream kernel

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-11 09:54:47 +01:00
Jo-Philipp Wich
7480d3309c kernel: add missing config symbols
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-10 22:02:40 +01:00
Felix Fietkau
e9b49a41e2 kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 17:49:47 +01:00
Felix Fietkau
c9dd40f628 kernel: remove gpiommc patches / driver
This code was marked as incompatible to Linux 4.4 well over a year ago
and nobody cared, and now it's breaking builds.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 15:45:33 +01:00
Rafał Miłecki
1a5cb4ac1b kernel: add pending bcm47xxpart support for failsafe TRX partition
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-10 15:37:22 +01:00
Rafał Miłecki
ef9208c51e kernel: update spi-nor.h include fix with upstream accepted version
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-10 15:37:22 +01:00
Rafał Miłecki
b4d2575add kernel: rename bcm47xxpart patches to fit more of them
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-10 15:37:21 +01:00
Felix Fietkau
01d9527357 kernel: remove DEVTMPFS platform overrides
Those options are handled via top-level menuconfig instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:48:53 +01:00
Felix Fietkau
c2fc52ae22 kernel: remove DEVMEM/DEVKMEM platform overrides
Those options are handled via top-level menuconfig instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:48:53 +01:00
Felix Fietkau
7ff7be96dd omap: build various core drivers into the kernel instead of packaging them
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:44:26 +01:00
Felix Fietkau
10f7a8d648 kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:44:25 +01:00
Felix Fietkau
f5c649d7c6 mpc85xx: build i2c support into the kernel instead of packaging it separately
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:44:25 +01:00
Felix Fietkau
96ade7adae mpc85xx: build usb support into the kernel instead of packaging it separately
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:44:24 +01:00
Stijn Tintel
0d3dc16931 ar71xx: drop references to madwifi
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 13:02:00 +01:00
Felix Fietkau
06c76e41d7 ppc44x: mark as broken
This target has consistently failed builds for a long time and it does
not look like it has any users left, nor any maintainers.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:49:34 +01:00
Felix Fietkau
43a528eb96 kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:37:13 +01:00
Kabuli Chana
fe876e9ac6 mvebu: Fix up some leds on this series
correct ports, fix power led on rango, tested mamba,shelby,rango

Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
2017-01-10 12:28:32 +01:00
Jo-Philipp Wich
72d751cba9 build: rework library bundling
Rework the bundle-libraries.sh implementation to use a more robust approach
for executing host binaries through the shipped ELF loader and libraries.

The previous approach relied on symlinks pointing to a wrapper script which
caused various issues, especially with multicall binaries as the original
argv[0] name was not preserved through the ld.so invocation. Another down-
side was the fact that the actual binaries got moved into another directory
which caused executables to fail looking up resources with paths relative
to the executable location.

The new library wrapper implements the following improvements:

 - Instead of symlinks pointing to a common wrapper, each ELF executable
   is now replaced by a unqiue shell script which retains the original
   program name getting called

 - Instead of letting ld.so invoke the ELF executable directly, launch
   the final ELF binary through a helper program which fixes up the argv[0]
   argument for the target program

 - Support sharing a common location for the bundled libraries instead of
   having one copy in each directory containing wrapped binaries

Finally modify the SDK build to wrap the staging_dir and toolchain binaries
which allows to use the SDK on systems with a different glibc version.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-10 12:27:28 +01:00
Felix Fietkau
acd0c8c178 kernel: move the gateworks system controller driver to an out-of-tree package
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
c00e5a4f09 mpc85xx: enable the crypto acceleration driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
a2f6b56c8f imx6: enable the crypto acceleration driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
29443e2c94 mxs: remove modules.mk, select drivers in the kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
915d7db9bd mxs: remove obsolete kernel package depending on linux 3.18
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
64be6fe9ca mxs: enable the chipidea usb driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
7450698957 imx6: enable the chipidea usb driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
7f0796d874 imx6: remove kmod-thermal-imx, it is already enabled in the kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
348fedc1a6 imx6: build support for the ventana ethernet expansion board into the kernel instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
c524d1b256 imx6: enable the Freescale SNVS RTC driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Florian Fainelli
e3358b2cc1 malta: Fix README file examples
The example command-lines used references and paths from an older directory
structure.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-01-10 08:54:59 +01:00
Antonis Kanouras
f2b6412c72 ramips: Fix VLAN limits for MT7621 GSW
Without this patch swconfig will only allow setting up a total of 16
VLANs, with VLAN ID range of 0-15.

Tested on ubnt-erx.

Signed-off-by: Antonis Kanouras <antonis@metadosis.eu>
2017-01-10 08:18:15 +01:00
Pavel Kubelun
6ebb46a40a ipq806x: fix pvs1_bin voltage in ipq8065 DT
Fixing pvs1 bin voltage as found in GPL tarball and Qualcomm SDK.

Also adjusting smb208_s2a/b minimum voltage to reflect lowest value in pvs table.

Current ipq8065 devices in LEDE choose (based on eFuse data) pvs bin n4, that has
correct values in DT, but in future a new device may choose n1 or n6.

Without this change n1 is semi-correct and n6 is not available, because OPP driver
disregards bins with voltage values that regulator cannot supply.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2017-01-10 08:11:14 +01:00
Hauke Mehrtens
f036956e1f lantiq: update USB controller initialization
This adds USB initialization fixes for Danube, Amazon SE and xrx300 and
should fix the clock on at least Danube which hopefully closes FS#351.

The xrx200 usb driver now uses more memory for the dwc2 fifos, this was
increased in the chip compared to ar9.

This is based in part on the vendor documentation and the vendor code
base as a reference.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-09 23:25:34 +01:00
Hauke Mehrtens
2dac67464d lantiq: fix dma locking problems with SMP
The DMA controller used only local locks, which will not lock the
section against other CPUs, fix this by using spin locks.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-09 20:23:28 +01:00
Felix Fietkau
1c6b1ab01d imx6: fix image boot ubifs compression option
--force-compr was added by the xz compression patch, which is gone now.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-09 16:29:45 +01:00
Felix Fietkau
018d80007e kernel: remove ubifs xz decompression support
It has been unused, and less useful than squashfs for cases where flash
space usage matters.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-09 14:07:06 +01:00
Felix Fietkau
50a3bce3eb rb532: drop patch-cmdline from base-files
It is no longer used for upgrading

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-07 17:50:57 +01:00
Felix Fietkau
ad76fdfc8a rb532: switch to UBI, drop yaffs2 support, use sysupgrade for NAND
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-07 17:50:57 +01:00
Felix Fietkau
5b6b0aa267 rb532: convert to new loopback based overlay support
Disable block2mtd support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-07 17:50:57 +01:00
Daniel Golle
b18f75c3d8 oxnas: minor kernel config improvements
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-07 15:27:30 +01:00
Daniel Golle
69903c3ee6 oxnas: require image metadata
Now that we generate images with metadata attached, require it in order
to prevent accidentally flashing the wrong image to a board.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-07 14:47:04 +01:00
Daniel Golle
870b7bee44 oxnas: remove some kprintf calls from NAND driver
They were added for debugging and I forgot to remove them.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-07 14:47:04 +01:00
Hauke Mehrtens
8f0dc92afd lantiq: fix console print for additional boards
I missed 3 boards in this commit:
commit d8dde8c517
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date:   Wed Jan 4 21:53:22 2017 +0100

    lantiq: fix console print

Add bootargs parameters for ARV4525PW, ARV7506PW11 and ARV8539PW22
again.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-06 23:00:02 +01:00
Hauke Mehrtens
88ca6390ea kernel: bump to 4.4.40
Refresh patches on all 4.4 supported platforms.
Compile & run tested: lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-06 19:38:55 +01:00
Cezary Jackiewicz
4235cd0d95 x86: add kernel module for AMD CS5535/CS5536 audio chipset
Add support for the integrated AC97 sound device on motherboards
with AMD CS5535/CS5536 chipsets.
Tested on Wyse Winterm S30.

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2017-01-06 15:35:20 +01:00
Vladimir Zahradnik
f277f45bd6 yaffs: fix to detect MLC/TLC NAND flash
Signed-off-by: Vladimir Zahradnik <vladimir.zahradnik@gmail.com>
2017-01-06 15:34:13 +01:00
Hauke Mehrtens
d8dde8c517 lantiq: fix console print
The boot loader of many boards provides a kernel boot argument with a
broken console parameter to the kernel. This will be taken before the
stdout-path defined in device tree and the serial will not work on this
board. Multiple boards are affected by this problem, so revert this
patch for all boards. Later we can remove the boot arguments from the
device tree again, after the individual board was checked to work.

This partly reverts this commit:
commit 4995c64857
Author: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date:   Sun Dec 11 21:55:00 2016 +0100

    lantiq: specify console using stdout-path instead of cmdline argument

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-05 23:10:44 +01:00
Matthias Schiffer
1fef80f29c
ar71xx: add support for TP-Link WBS210/510
The devices are mostly identical to the CPE210/510, but use external
antennas.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-01-05 16:01:17 +01:00
Yousong Zhou
0ac00c931c sunxi: use fwtool for checking sdcard images
To achieve this, device tree compatible string was used as boardname and
the value of it will be checked against supported_devices list.

It should be noted that we do not distinguish between
sun5i-a13-olimex-som and sun5i-a13-olinuxino as they share the same dts
file.

The other thing is that we need to gunzip the generated firmware to do
fwtool check.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:15 +01:00
Yousong Zhou
5ece16fd23 sunxi: add sysupgrade support
Enalbe builtin support for FAT filesystem as we need to mount boot
partition to store sysupgrade.tgz there

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:15 +01:00
Yousong Zhou
8a2c56ca03 sunxi: make sdcard image with squashfs as rootfs
Two things that need to be noted

 - There is no partition type id allocated for squashfs yet.  In the
   case of sunxi, any non-zero value should work and we keep it 83 (the
   value for ext4)
 - Remaining spare space within the rootfs partition, not the entire
   sdcard space will be formated as either f2fs or ext4 and mounted as
   overlay to serve the role of rootfs_data.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:14 +01:00