Commit graph

1805 commits

Author SHA1 Message Date
Hauke Mehrtens
763e2502b6 kernel: update 4.1 to 4.1.2
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.2

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46301
2015-07-11 19:59:26 +00:00
Hauke Mehrtens
e0402257e5 kernel: update 4.0 to 4.0.8
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.8

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46300
2015-07-11 19:59:05 +00:00
Hauke Mehrtens
58b66cdd75 kernel: update 3.18 to 3.18.18
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.18

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46299
2015-07-11 19:58:44 +00:00
Felix Fietkau
ceda9f1554 kernel: add missing config symbol (fixes #19880)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46265
2015-07-08 08:20:44 +00:00
Felix Fietkau
a757d4fd56 kernel: add missing 4.1 config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46264
2015-07-08 08:20:38 +00:00
John Crispin
8f0e96ee11 mips: Free memory when load_module fails (#14453)
The mips reloc patch introduced new allocations which were done before
add_unformed_module but never freed them in case of an error. A new hook in
Linux 3.19 called module_arch_freeing_init can be used for freeing memory
which were allocated during this init phase.

The problem can be seen when trying to load a module (via busybox insmod)
when it was already loaded.

    free -m
    for i in `seq 1 100`; do
        /sbin/insmod /lib/modules/*/ath9k.ko >& /dev/null
    done
    free -m

This simple loop would leak ~3.2 MB.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46247
2015-07-07 13:48:27 +00:00
John Crispin
8fa677d7b0 generic: mtd backport for Spansion S25FL164K
Backport for the Spansion S25FL164K
It's a 8 MiB flash chip with 4 KiB erase sectors.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 46237
2015-07-07 13:47:08 +00:00
John Crispin
b9463ce786 generic: Allow configuring an increment with mtd-mac-address
This is useful if the device also has an ethernet WAN interface with a
separate mac address (that is derived from the LAN mac address).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46220
2015-07-07 13:44:27 +00:00
Jonas Gorski
fc3cda695c kernel: add a few more missing config symbols
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46188
2015-07-05 21:32:55 +00:00
Jonas Gorski
04053a1217 kernel: generic: add missing arm machtypes
Some machtypes were dropped when 4.0 support was added, and the
incomplete patch was taken over to 4.1.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46187
2015-07-05 21:32:49 +00:00
Jonas Gorski
cf304f5a5e kernel: mips_disable_fpu: initialize fault_addr in fpu_emulator_cop1Handler
Code calling fpu_emulator_cop1Handler will pass on fault_addr, making gcc
complain about it not being initialized when the FPU emulator is disabled.

Fixes:

arch/mips/kernel/traps.c: In function 'do_fpe':
arch/mips/kernel/traps.c:864:22: error: 'fault_addr' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  process_fpemu_return(sig, fault_addr, fcr31);
                      ^
arch/mips/kernel/traps.c: In function 'do_ri':
arch/mips/kernel/traps.c:806:22: error: 'fault_addr' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  process_fpemu_return(sig, fault_addr, fcr31);
                      ^
arch/mips/kernel/traps.c:763:15: note: 'fault_addr' was declared here
  void __user *fault_addr;
               ^
arch/mips/kernel/traps.c: In function 'do_cpu':
arch/mips/kernel/traps.c:1421:28: error: 'fault_addr' may be used uninitialized in this function [-Werror=maybe-uninitialized]
   if (!process_fpemu_return(sig, fault_addr, fcr31) && !err)
                            ^
cc1: all warnings being treated as errors
make[7]: *** [arch/mips/kernel/traps.o] Error 1

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46184
2015-07-05 21:31:54 +00:00
Hauke Mehrtens
d0aca89c18 kernel: b53: fix build with brcm47xx
The position of the nvram header file on brcm47xx changed with kernel
version 4.1.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46170
2015-07-03 23:27:21 +00:00
Jonas Gorski
fa401693d9 kernel: improve uapi headers coexistence with musl
Make some network uapi headers detect if they are included after
not only glibc but also musl headers.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46161
2015-07-03 11:48:45 +00:00
Jonas Gorski
831d1c8b45 kernel: update 4.0 to 4.0.7
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.6
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.7

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46151
2015-06-30 23:26:13 +00:00
Jonas Gorski
901a7fa067 kernel: update 3.18 to 3.18.17
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46150
2015-06-30 23:26:09 +00:00
Hauke Mehrtens
206f1db59e kernel: add some missing config options for 4.1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46147
2015-06-29 22:20:05 +00:00
Jonas Gorski
a0c49ef46f generic: add linux 4.1 support
Boot tested: http://pastebin.com/L6aAb9xj

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo:
  update to 4.1 final
  add patches added since submission
  delete patches applied in later rcs
  restore commit messages in 220-gc-sections and 304-mips_disable_fpu
  fix 050-backport_netfilter_rtcache to match new API
  update inlined dma ops with upstream changes
  add missing config symbols
  enabled CONFIG_MULTIUSER
  update kmod defintions for 4.1
]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46112
2015-06-22 12:27:59 +00:00
Rafał Miłecki
5c809ecfe7 b53: Allow using all 8 ports on BCM53011
On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000
(BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port
5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and
usually 3 of them are connected to the SoC.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46104
2015-06-21 21:06:09 +00:00
Rafał Miłecki
51042bc517 kernel: make USB_XHCI_PLATFORM selectable
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46079
2015-06-21 10:18:24 +00:00
Jonas Gorski
0f5b1a3eca kernel: update 4.0 to 4.0.5
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.5

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46063
2015-06-19 11:12:43 +00:00
Felix Fietkau
6585c532bd kernel: add linux 4.0 overlayfs locking fix by Miklos Szeredi
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46019
2015-06-17 12:55:20 +00:00
Jonas Gorski
9a59b350b7 kernel: update 3.18 to 3.18.16
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46011
2015-06-17 09:54:55 +00:00
Felix Fietkau
48123b0ce0 kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46007
2015-06-17 09:08:20 +00:00
Felix Fietkau
42dcce7e4a kernel: add missing config symbol (#19870)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45992
2015-06-15 21:16:15 +00:00
Felix Fietkau
4a9d726200 ar8216: Fix problem with AR8337 MAC swap handling
AR8337 supports a configuration bit to swap MAC0 and MAC6.
Currently this is set in general if an AR8337 is detected and causes
issues with devices using an AR8334 (internally an AR8337, just
less chip pins).
And it might even cause issues with AR8337-based devices with
different board designs.

Swapping the MAC's however isn't needed for AR8337 in general.
It's just needed in case of certain board designs (affected devices
seem to be based on Atheros reference board AP135/136-010).
Therefore this configuration bit should be moved to platform data.

The patch includes the needed changes to the device initialization
code of affected devices. Hopefully I didn't miss any ..

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 45970
2015-06-14 17:43:50 +00:00
Jonas Gorski
9fbd6d0ba0 b53: fix memory out of bounds access on 64 bit targets
On device reset the sizes for the vlan and port tables were wrongly
calculated based on the pointer size instead of the struct size. This
causes buffer overruns on 64 bit targets, resulting in panics.

Fix this by dereferencing the pointers.

Reported-by: Fedor Konstantinov <blmink@mink.su>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45938
2015-06-10 09:21:36 +00:00
Jonas Gorski
d24d5412ff b53: widen stp state mask to 3 bits (instead of 2)
At least on my b53 chip, the mask is 3 bits wide, and because
of this some STP states are not set properly and discarded when read.

Maybe for some other chips it makes sense to have just 2 bits width,
but I don't have other versions around to test/validate.

If that's the case then maybe we could add another STP state mask.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45937
2015-06-10 09:21:31 +00:00
Rafał Miłecki
a1340b5cce kernel: backport config-related bcma patches from 4.2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45927
2015-06-08 12:49:54 +00:00
Felix Fietkau
b9ebf29fbd kernel: move a symbol from the ipq806x config to generic to prevent it from being nuked by make kernel_oldconfig
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45920
2015-06-07 07:32:35 +00:00
Felix Fietkau
5a64d5337b kernel: adjust mips highmem offset to avoid the need for -mlong-calls on systems with >256M RAM
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45891
2015-06-05 08:07:35 +00:00
Rafał Miłecki
6bc9e00e94 kernel: backport ssb fix for WRT350N v1 (BCM4705) reboots
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45865
2015-06-01 06:11:26 +00:00
John Crispin
50da78705a kernel: upstream fix: mount overlayfs r/o if workdir cannot be created
move the patch to the proper folder

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45848
2015-05-30 13:16:23 +00:00
John Crispin
fe844bf0b4 kernel: add missing STMMAC options in generic configs
STMMAC_PLATFORM and STMMAC_PCI have been added recently in the kernel,
but show up only when STMMAC driver is enabled. So se'll add it in the
generic config, so the kernel build doesn't stall whenever we enable
this driver.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45828
2015-05-29 12:25:29 +00:00
Felix Fietkau
388404764d kernel: bridge: backport two snooping related patches
With this patch the following two patches are backported:

* bridge: fix parsing of MLDv2 reports
* bridge: allow setting hash_max + multicast_router if interface is down

The former one is an important fix which got just applied to the net-tree
and is queued for stable. The latter is a patch which is needed to make
the hash_max and multicast_router attributes configurable through
netifd.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>

SVN-Revision: 45783
2015-05-27 15:20:04 +00:00
Imre Kaloz
588acc2cba generic/4.0: update to 4.0.4
Update kernel sources and refresh some patches.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45761
2015-05-26 09:31:16 +00:00
Jonas Gorski
4e2b4d8072 kernel: add missing generic config symbol
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45714
2015-05-22 22:51:34 +00:00
Jonas Gorski
76d079204d kernel: update 3.18 to 3.18.14
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
Steven Barth
53098a8aa5 generic/4.0: fix error during kernel patch application
Commit 5168c9a5702648eb690d32ec821647aca80aeba9 introduced a regression
during patch application on the 4.0 kernel. Some of the patched content
doesn't match the actual code, therefore leading to the following error:
  Applying patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch
  patching file net/ipv6/ip6_output.c
  Hunk #1 FAILED at 886.
  1 out of 1 hunk FAILED -- rejects in file net/ipv6/ip6_output.c
  patching file net/ipv6/route.c
  Hunk #1 succeeded at 2247 (offset 2 lines).
  Patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch does not apply (enforce with -f)

This change just adapts the actual patch to fix what is in kernel 4.0
and make it apply cleanly.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45705
2015-05-20 19:23:33 +00:00
Steven Barth
1296956908 linux: backport IPv6 SAS fixes for source-specific routes
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 45699
2015-05-19 07:43:59 +00:00
Rafał Miłecki
260383aeb1 kernel: backport struct ssb_sprom changes submitted by MIPS tree
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45677
2015-05-13 07:52:43 +00:00
Rafał Miłecki
e93c68eedd b53: Allow using all ports on BCM53012
This chipset has at least 8 usable ports, e.g. Netgear R8000 has ports
5, 7 and 8 connected to Ethernet interfaces:
vlan1ports=0 1 2 3 5 7 8*
vlan2ports=4 8u
Port 6 seems to be always disabled.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45676
2015-05-12 13:18:53 +00:00
Felix Fietkau
ac0e2479dc mtd: remove the warning about read-only caused by size vs. block boundary mismatch
Since the kernel/rootfs split handling was modified 2 years ago by r37283 (
https://dev.openwrt.org/changeset/37283 ) and by the subsequent checkins,
users have seen rather scary mtd errors in the log at every boot. The message
ends "-- forcing read-only", which looks a bit error-like. That error has
been mentioned in some forum threads, when users have noticed this message
instead of some actual error.

[    2.940000] 0x000000070000-0x000000ff0000 : "firmware"
[    2.970000] 2 netgear-fw partitions found on MTD device firmware
[    2.970000] 0x000000070000-0x000000188440 : "kernel"
[    2.980000] mtd: partition "kernel" must either start or end on erase
block boundary or be smaller than an erase block -- forcing read-only
[    2.990000] 0x000000188440-0x000000ff0000 : "rootfs"

The patch removes the rather useless warning message.

signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

SVN-Revision: 45669
2015-05-10 16:09:58 +00:00
Felix Fietkau
9ebb99cb98 kernel: fix regression in backtrace module info change (#19631)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45665
2015-05-10 13:16:40 +00:00
Felix Fietkau
9913b6a90a generic: add CRYPTO_DEV_QCE option to default config
This option has been added in kernel 3.17. It shows-up only when both
ARCH_QCOM and CRYPTO are enabled. So we'll disable these two by default
to avoid stalling the build when these conditions are met.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45658
2015-05-10 11:46:41 +00:00
Felix Fietkau
53827cdc82 kernel: when KALLSYMS is disabled, print module address + size for matching backtrace entries
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45655
2015-05-10 00:02:18 +00:00
Felix Fietkau
a13783f8c3 kernel: fix pppoe disconnect issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45653
2015-05-09 21:14:41 +00:00
Rafał Miłecki
3a6cdac37c kernel: backport first bcma patches from 4.2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45652
2015-05-09 17:38:48 +00:00
Felix Fietkau
dbb99e937a kernel: add accidentally left out fib trie backport patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45650
2015-05-08 21:46:51 +00:00
Luka Perkov
3209b13b3f generic: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45648
2015-05-08 20:12:42 +00:00
Felix Fietkau
333579e527 kernel: backport upstream usbnet fix (fixes #19455)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45621
2015-05-06 10:19:22 +00:00